Construction of C-Category Multistoried Tower, 52 units at Vastrapur Government colony, Ahmedabad.

Rate in Total

Item No. specification and reference to book of Quantity Unit

Figures Amount

specifications)

1 Excavation for foundation upto 1.50 2033.000 Cum 117.08

mt depth including sorting out and stacking

of useful materials and disposing the

excavated stuff all lead

(A) Loose or soft soil

2 Excavation for foundation 1.50 mt to 1108.000 Cum 162.38

3.00 mt depth including sorting out and

stacking of useful materials and disposing

the excavated stuff all lead

(B) Dense or hard Soil

3 Excavation for foundation 3.00 mt to 5.00 744.000 Cum 285.73

mt depth including sorting out and stacking

of useful materials and disposing the

excavated stuff all lead

(C) Hard Murrum.

4 Filling available excavated Earth (Excluding 2929.000 Cum 130.39

Rock) in trench plinth side of foundation in

layer not excluding 20 cm in depth

consolidation each deposited layer by

ramming and watering etc. complete.

5 Collecting Carting and disposing of surplus 898.000 Cum 419.92

earth, debris etc. with 0 to 5 Km lead and lift.

6 Filling foundation and plinth with murrum or 191.000 Cum 289.06

including ramming watering and

consolidating etc. complete.

Description of Item (with brief

Rate in Total

Item No. specification and reference to book of Quantity Unit

Figures Amount

specifications)

7 Anti-Termite System: Providing and laying of 737.000 Sqm 134.33

permanent piping technology anti-termite

treatment before flooring work by installing

LLDP (Low linear density polyethylene) tube

of 8 mm O.D. & 6.4 mm I.D. with inbuilt

pressure compensation chip every 30 cm

interval in the tube, having working pressure

of 2 Kg/cm² and release rate of 1.9 ltr/hour

fixed by P-clips and nails. The LLDP pipe

shall be installed at the entire periphery of

the building and at internal network of

building at a depth of 20 to 200 mm under

floor at every 2 to 3 mtr. c/c distance

(adjusted as per building layout) & ends of

loop pass through a PVC elbow of minimum

32 mm ID at junction box of wall and floor

level, entering into a steel reinforced

grooved flexible pipe of minimum 22 mm ID

leading into junction box and the loops shall

terminate in junction boxes & test every

junction during

injecting chemicals for termite control

treatment. The anti-termite chemical

Imidacloprid 30.5% SC - Sq.mt 133.00 mix

as per IS-6313 (part III) shall be injected by

the pressure pump diluted with water @

10.5 ml/5 ltr of water at the rate of

Kg/sq.cm @ 5 ltr/SMT. The contractor shall

submit approved line plan for piping system

and junction boxes dully approved by

Engineer-in-Charge with bond of 5 year

warranty. (i) Anti-termite chemical injected

area (Chemical injecting incl. labour cost).

Description of Item (with brief

Rate in Total

Item No. specification and reference to book of Quantity Unit

Figures Amount

specifications)

8 Filling in plinth with sand under floors 178.000 Cum 460.19

including watering ramming, consolidating

and dressing etc. complete.

9 Providing and laying in position Ready Mixed M- 619.300 Cum 4024.57

150 grade concrete for reinforced cement

conctere work in Foundations & Plinth, using

cement content as per approved Design Mix

manufactured in fully automatic batching plant

and transported to site of work in transit mixer

for a lead up to 10 kms having continuous

agitated mixer, manufactured as per mix design

of specified grade for reinforced cement

concrete work including pumping of R.M.C.

from transit mixer to site of laying, excluding the

cost of reinforcement and including cost of

centering. shuttering, formwork finishing and

admixtures in recommended proportions as per

IS : 9103 to accelerate/ retard setting of

concrete, improve workability without impairing

strength and durability as per direction of the

Engineer -In - Charge. Without Fly Ash (Min

cement level as per latest IS 456 shall be

maintained) (Cement level 290 kg)

Description of Item (with brief

Rate in Total

Item No. specification and reference to book of Quantity Unit

Figures Amount

specifications)

10 Providing and laying in position Ready 63.000 Cum 5114.71

Mixed M-200 grade concrete for reinforced

cement conctere work in Grade Slab, using

cement content as per approved Design Mix

manufactured in fully automatic batching

plant and transported to site of work in

transit mixer for a lead up to 10 kms having

continuous agitated mixer, manufactured as

per mix design of specified grade for

reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site

of laying, excluding the cost of

reinforcement and including cost of

centering. shuttering, formwork finishing

and admixtures in recommended

proportions as per IS: 9103 to accelerate/

retard setting of concrete, improve

workability without impairing strength and

durability as per direction of the Engineer -in

- charge. Without Fly Ash (Min cement level

as per latest IS 456 shall be maintained)

(Cement level 360 kg ).

Description of Item (with brief

Rate in Total

Item No. specification and reference to book of Quantity Unit

Figures Amount

specifications)

11 Providing and laying in position Ready 3630.500 Cum 6759.21

Mixed M-250 grade concrete using cement

content as per approved Design Mix

manufactured in fully automatic batching

plant established on site and transported to

site of work in transit mixer having

continuous agitated mixer, manufactured as

per mix design of specified grade for

reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site

of laying, excluding the cost of

reinforcement and including cost of

centering. shuttering, formwork finishing

and admixtures in recommended

proportions as per IS : 9103 to accelerate/

retard setting of concrete, improve

workability without impairing strength and

durability as per direction of the Engineer -In

- Charge. Without Fly Ash (Min cement level

as per latest IS 456 shall be maintained) for

all RCC elements like Footings , Mass

concrete , Column up to GL , Ground/Plinth

Beam Plinth Slab, Columns, Beam,

Chhajja, Lintal, Slab, Stair, RCC Wall,

Coping etc. For All Floor

12 Extra for concreting in grade M350 instead 828.684 Cum 273.57

of M250 including cost of cement, labour

etc. complete.

13 Extra for concreting in grade M300 instead 150.000 Cum 182.38

of M250 including cost of cement, labour

etc. complete.

Description of Item (with brief

Rate in Total

Item No. specification and reference to book of Quantity Unit

Figures Amount

specifications)

14 Providing IS Mark TMT FE-550D bar 595440.000 Kg 101.06

reinforcement for RCC work including

bending & placing in position complete up to

All floor Level

15 Brick work using common burnt clay 120.000 Cum 4021.02

conventional building bricks having crushing

strength not less than 35 Kg/sqmt. in

foundation and plinth in cement mortar 1:6 (

1 cement : 6 fine sand ) including curing etc.

16 Brick work using common burnt clay 1315.000 Cum 4541.64

building bricks having crushing strength not

less than 35 kg./Sq.Cm. in foundation and

plinth in Cement Mortar 1:6 (1- Cement : 6 -

fine sand) (B) Conventional as per directed

by Architech or Engineer-in-charge etc.

complete. for All Floor Level.

17 Providing and Laying Half brick masonry in 2107.000 Sqm 752.93

common brunt clay building bricks having

crushing strength not less than

Kg./Sq.cm.. In cement mortar 1:3

(1cement : 3 coarse sand) with 2 Nos.

of 6 mm. Diameter mild steel round bars

after every three course embedded in

cement mortar in All Floors

(b) Conventional

Description of Item (with brief

Rate in Total

Item No. specification and reference to book of Quantity Unit

Figures Amount

specifications)

18 Providing and Fixing 35 mm thick openable 736.000 Sqm 3606.26

single shutter both side laminated flush door

with 1.0 mm thick pattern lamination of the

standard make on both side, 'I' shape Pull

Handles 200-300 mm long of 32 mm

diameter of S.S. grade 304 as per approved

by Engineer - in - Charge, one number of

mm diameter 10" long anticorrosive high

grade AISI 304 stainless steel tower bolt in

satin finish as per approved by Engineer in

Charge, four numbers of anticorrosive high

grade AISI 304 stainless steel hinges of size

102 mm x 76 mm x 3 mm as per approved

by Engineer in Charge and anticorrosive

high grade AISI 316 stainless steel, 10 mm

diameter x 250-300 mm long aldrap in satin

finish including stregthning the granite

jambs & soffit by means of anchor bolts by

drilling hole in the granite prior to fixing door

as per approved by Engineer

in Charge and one number of cylindrical

magnetic door catch as per approved by

Engineer in charge oil painting / polishing to

sides of shutters etc. complete.

Description of Item (with brief

Rate in Total

Item No. specification and reference to book of Quantity Unit

Figures Amount

specifications)

19 Providing and fixing SINGLE 121.000 Sqm 6917.57

SHUTTER Partly Panneled Safety Door

using 12 mm dia SS Rods at 70mm c/c

made from 35mm thick Flush Door

Shutters confirming to IS 2202 & ISI

approved manufacturer, covered with 1 mm

thick Laminates on both shutters of

approved colour, pattern and design by the

Architect, and 6 mm thick polished

teakwood beading on periphery fixed with

min. 4 nos. of 150 mm high SS Hinges

including 200 mm Stainless Steel

Handles, Heavy Stainless steel Aldrop

and other SS Fixtures and locking

arrangements as per detailed drawings /

as directed and approved by the Architect

and Engineer In-charge etc. complete.

Description of Item (with brief

Rate in Total

Item No. specification and reference to book of Quantity Unit

Figures Amount

specifications)

20 Providing & fixing in position standard 281.000 Sqm 4103.63

extruded Aluminum Three track (3 shutter +

1 Mosquito net shutter) with Standard

Extruded Colour Anodied Alluminium

Section Equivalent to Jindal Series E

(30mm) Section Numbered: Frame -Bottom

with Weep Holes -20928, Frame Top & Side-

20837 ,Shutter Top & Bottom

Shutter Inter Lock -20550 ,Shutter Side

(handle) -20549 With 5mm thick

Transparent Tinted Float Glass With EPDM

Rubber Gasket, Air Lock Stirip dd another

shutter fitted with SS wire mosquito mesh

jali in the same Aluminium shutter section

and Finishing , Joint With Section Sealant,

With Power Coated Standard Alluminium

Fitting.with as per window size including all

required materials labours and equipments

as per detailed drwg. as per directed by

Architech or Engineer-in-charge etc.

complete. for All Floor

Description of Item (with brief

Rate in Total

Item No. specification and reference to book of Quantity Unit

Figures Amount

specifications)

21 Providing and fixing in position standard 148.000 Sqm 4339.97

extruded Aluminium three-track sliding

window (2 shutters + 1 mosquito net shutter)

made of colour anodized extruded

Aluminium sections equivalent to Jindal

Series E (30 mm), comprising: Frame

Bottom with weep holes – Section No.

20928, Frame Top & Side – Section No.

20837, Shutter Top & Bottom – Section No.

20993, Shutter Interlock – Section No.

20550, and Shutter Side (handle) – Section

No. 20549. The shutters shall be fitted with

5 mm thick transparent tinted float glass

fixed with EPDM rubber gasket, and one

shutter provided with SS wire mosquito

mesh jali in the same Aluminium shutter

section. The system shall include air lock

strip, joint sealing with approved sealant,

and finishing with powder-coated standard

Aluminium fittings, complete as per window

size and detailed drawings.

The rate shall be inclusive of all materials,

fittings, fixtures, labour, equipment, and

accessories, and the work shall be carried

out as per directed by Architech or

Engineer-in-charge etc. complete. for All

Description of Item (with brief

Rate in Total

Item No. specification and reference to book of Quantity Unit

Figures Amount

specifications)

22 Providing & Fixing in position standard 58.000 Sqm 1874.56

extruded approved colour anodised

Aluminum Ventilator with outer frame (of

Jindal Section No.21458,@ Wt0.650 kg/Rmt

) with 5mm thick Bajari figure adgesteble

tinted louvers glass fixed to alluminium strip

blade including fixtures, fastenning, labours

and equipments as per detailed drawing as

directed. For Ventilators as per directed by

Architech or Engineer-in-charge etc.

complete. for All Floor

23 Providing & fixing M. S. grills of required 15744.000 Kg 122.38

pattern to wooden or other frames of

windows etc. with either M.S. flats or M.S.

pipes at required spacing & frame around,

square or round bars with round headed

bolts & nuts or by screws as per design and

including one coat of primer and two coats

of matt finished oil painting etc complete.

24 Providing and fixing Aluminium composite 92.000 smt 2214.26

panel cladding work with using 3 mm thick

exterior composite panel and alluminium

natural anodisizing flat of 38.10 x 25 x

mm including filling the A.C.P. jopints by

silicon sealent, baker rod size depend upon

gape between two panel with all material,

hardware, necessary scaffolding,

acessories & fittings etc completed as per

drawings & specifications and as directed by

the Engineer-in-charge.

Description of Item (with brief

Rate in Total

Item No. specification and reference to book of Quantity Unit

Figures Amount

specifications)

25 Providing and laying machine cut free edge 344.000 Sqm 2436.12

machine polished granite stone 15mm -

18mm thick finished treads in length with

1cm projecting nozing rounded moulding in

tread laid over 20 mm (av.) thick of CM 1:6

on treads jointed with grey or colour cement

slurry including rubbing and polishing incl.

making Three No.s of grooves of size 3mm

X 3mm along the length of treads etc.

complete as per directed by Architech or

Engineer-in-charge etc. complete. for All

26 Providing and fixing mirror polished 16mm 1887.000 Sqm 3216.85

to 18 mm thick Balck Granite stone with full

round edge and mirror polish of approved

quality, shade and colour as approved by

Engineer-in-Charge, in cladding on sill and

around the lift door, fixed with 12 mm thick

cement mortar CM (1:3) and cement slurry

& approved adhesive, including moulding

and polishing of all exposed edges, as per

directed by Architech or Engineer-in-charge

etc. complete. for All Floor

Description of Item (with brief

Rate in Total

Item No. specification and reference to book of Quantity Unit

Figures Amount

specifications)

27 Providing and fixing 600 mm x 600mm / 24" 2985.410 Sqm 1073.13

x 24" of 8 to 10 mm thick Double Charged

Polished vitirified tiles as approved by

Engineer in charge in two colour patern in

light / dark shade (Approx 10% Dark Colour

Tiles for pattern) flooring over 20 mm base

of cement mortar (1:6) ( 1 Cement : 6 corse

Sand ) laid over new surface and jointed

with colour cement slury and finished with

flush pointing and cleaning the surface etc

complete as directed by engineer in charge

For Antiskid.

28 Providing and laying 8 to 10 mm thick 400.380 Sqm 1141.45

Polished vitirified tiles as approved by

Engineer - in - charge in two colour pattern

in Light / Dark shade Skirting, Risers of

Steps, Dedo on 10mm thick Cement Plaster

1:3 (1 cement : 3 coarse sand) and jointed

with colour cement slurry and finished with

flush pointing and cleaning the surface

etc.complete as directed by Engineer-in-

29 Providing and laying 600 mm x 600 mm x 10 821.020 Sqm 1397.83

mm thick full body Glazed Vitrified tile as

approved by Engineer - in - Charge in one /

two colour pattern (Approx 10% Dark Colour

Tiles for pattern) flooring over 20 mm

(average) base of cement mortar 1:6 (1

cement : 6 coarse sand) laid on new surface

and jointed with colour cement slurry

including finishing with flush pointing &

cleaning the surface etc. complete.

Description of Item (with brief

Rate in Total

Item No. specification and reference to book of Quantity Unit

Figures Amount

specifications)

30 Providing and laying 600 mm x 600 mm x 10 62.000 Sqm 1538.85

mm thick full body Glazed Vitrified tile as

approved by Engineer - in - Charge in dedo,

skirting of ths same material of flooring

colour, shade & in pattern as per drawing

including 10mm average thick base of

cement mortar 1:3 (1 cement : 3 coarse

sand) laid over and jointed with colour

cement slurry etc.

31 Provdg. & laying matt finished 243.000 Sqm 917.25

Porcelain/ceramic tiles of size 300 x

mm or 600 x 600 mm or any specified size

with 3mm groove & epoxy grouting as

directed by engineer in charge 6 to 8 mm th.

as approved by Engineer in Charge In

flooring, treads of steps & landings laid on a

bed of 12 mm th. Cement mortar 1:3

(1cement : 3 coarsesand finished with flush

pointing in white cement.

32 Provdg. & laying 60 X 60 cm. hand dressed 236.000 Sqm 992.66

polished Blue kota stone slab flooring over

20 mm (average) th. base if cement mortar

1:6 (1 cement : 6 coarse sand) or L.M. 1:1.5

laid over and jointed with grey cement slurry

mixed with pigment to match the shade of

slab incl. Rubbing & polishing, Spacer and

edge moulding of sides etc. complete. (A)

25 mm thick.

Description of Item (with brief

Rate in Total

Item No. specification and reference to book of Quantity Unit

Figures Amount

specifications)

33 Providing and laying Colour / printed / 3218.000 Sqm 1441.22

Designer digitalized glazed ceramic tiles of

size 600mm x 300 mm specified size with

3mm groove & epoxy grouting as directed

by engineer in charge 8 mm to 10mm thick

as approved by Engineer in Charge in

skirting risers of steps and dado on 10 mm.

Thick cement plaster 1:3 (1 cement :

coarse sand) pointing in white cleaned

jointed with white cement slurry.

34 Providing and fixing pre-cast inter 1620.000 Sqm 686.90

locking concrete block {Equivalent to Vyara

as approved by Architect} 60mm thick with

grade of concrete M300 pnumatic

compressed / vibrated mechanically

and as per approved design Confirming

to IS 15658 : 2006 including 35 mm

Sand layer for levelling and filling the

joint with sand in proper line and level

as per guidlines of IRC : SP 63-2018 etc.

35 Providing and fixing pre-cast concrete 742.000 Rmt 361.64

kerb stone of gray cement based

concrete block 30cm length, 30cm

height and 15 cm thick of M 250 grade

concret as per approved design and

including excavation for fixing in proper line

and leve, filling the joint with C:M 1:3 (1

Cement : 3 fine sand) etc complete.

Description of Item (with brief

Rate in Total

Item No. specification and reference to book of Quantity Unit

Figures Amount

specifications)

36 Providing and laying cement concrete work 38.000 Cum 4052.59

1:2:4 (1-Cement : 2- Coarse sand : 4-

graded stone aggregates 20 mm nominal

size) and curing complete excluding cost of

formwork and reinforcement for reinforced

concrete work for Tarrace.

37 Providing and laying water proofing 500.000 Sqm 1047.95

treatment with china mosaic tiles flooring

over avg 40 mm C.C. 1:2:4 {1 Cement :

sand : 4 Kapachi / Grit 6 to 12 mm

size} bedding for maintaining slope for

plain and curve surface & 12 mm to 20 mm

of broken piece of ceramic / glazed tiles (

one for more color as directed ) to be laid

over cement mortar bedding of C M 1:3 (1

cement : 3 sand ) contain one Kg of

water proofing materials per bag of O P C

at plain or / and slops and to be tempered to

bring mortar ceramic up to surface with

using white cement and colour pigment

including rounding of junctions and

extending them up to 15 cm along the

wall and curing with bends any patterns or

design as per drawing and cleaning by

using oxalic acid etc complete.

Description of Item (with brief

Rate in Total

Item No. specification and reference to book of Quantity Unit

Figures Amount

specifications)

38 Providing 20 mm thick double coat mala 14993.000 Sqm 475.19

cement plaster on interior brick/ concrete

Walls for plastering comprising of base

coat of 12 mm thick cement plaster in

cement mortar (1 cement : 4 coarse sand) in

rough finishing and 8 mm thick top coat of

cement plaster 1:2 (1 cement : 2 Coarse

Sand) finished with trovel including two

coats of acrylic lappy (putty) of approved

or equivalent brand and two coats of primer

of approved brand and manufacture on

new wall surface to give an even shade

including trovel scaffolding curing and 1 cm

x 1 cm grooves at junction of structural

members etc. thoroughly brushing the

surface free from mortar dropping and other

foreign matter and sand papered smooth

including scaffolding curing etc.complete. All

Description of Item (with brief

Rate in Total

Item No. specification and reference to book of Quantity Unit

Figures Amount

specifications)

39 Providing 10 mm. Thick Mala cement plaster 5957.000 Sqm 336.17

in single coat on brick/concrete for

plastering on ceiling and soffits of stairs upto

floor two level and finished even and

smooth including scaffolding, curing and

cm x 1 cm grooves at junction of structural

members etc : (I) Cement mortar 1:3 (1

cement : 3 sand) including two coats of

acrylic lappy (putty) of approved or

equivalent brand and two coats of primer of

approved brand and manufacture on new

wall surface to give an even shade

including thoroughly brushing the surface

free from mortar dropping and other

foreign matter and sand papered smooth.

All Floors

40 Providing, filling and laying Cinder for all 117.000 Cum 1393.80

floors etc complete: (a) Filing in sunk.

41 Providing 20 mm thick cement plaster in 562.000 Sqm 439.65

single coat on brick / concrete wall for

interior plastering up to floor two level

finished even and smooth (ii) Cement

mortar 1:3 ( 1 - cement , 3 - sand ) and

mixing approved waterproofing materials in

cement mortar in proportion recommended

by the manufacturer for All Floors.

Description of Item (with brief

Rate in Total

Item No. specification and reference to book of Quantity Unit

Figures Amount

specifications)

42 Painting (three coats) with plastic 14794.000 Sqm 112.95

emulsion paint of approved brand and

manufacture on wall surfaces to give an

even shade including thoroughly brushing

the surface free from mortar dropings

and other foreign matter and sand papered

smooth. All Floors

43 Painting (three coats) with plastic 5957.000 Sqm 120.59

emulsion paint of approved brand and

manufacture on ceilings,Soffits and

sloping roofs to give an even shade

including thoroughly brushing the surface

free from mortar dropings and other foreign

matter and sand papered smooth. All Floors

44 Distempering (two coats) with oil bound 1326.000 Sqm 76.84

wash able distemper of approved brand

& manufacture and of required shade on

wall surfaces to give an even shade

over & including priming coat with

alkali resistance primer of approved brand

after thoroughly brushing the surface free

from mortar dropping & other foreign

matter and also preparing the surface

even and smooth.

Description of Item (with brief

Rate in Total

Item No. specification and reference to book of Quantity Unit

Figures Amount

specifications)

45 20 mm. Thick sand faced GUTAKA 8341.000 Sqm 360.40

FINISHED WITH 1 CM X 1CM GROOVES

AS PER PATTERN cement plaster on walls

upto All height above ground level

consisting of 12 mm. Thick backing coat of

c.m. 1:3 (1 cement : 3 sand) and 8 mm.

Thick finishing coat of c.m. 1:1 (1 cement :

1 sand) including making groove 6 mm

wide and 8 mm deep as approved

pattern etc. complete as directed.

46 Finishing wall with weather proof exterior 8587.000 Sqm 133.62

Acrylic emulsion paint as approved by

Engineer in Charge on wall surface in two

coats & One coat of primer of white cement

material to give an required shade after

thoroughly brushing the surface to remove

all dirt, and remains of loose powdered

materials etc. complete for all floor.

47 Providing and fixing concealed center 520.000 Rmt 166.86

point to wall ceiling & floor CPVC

(SDR 13.5) PIPE having National

Sanitation Foundation (NSF) seal for

potable water of following dia. nominal bore

tube fittings and clamps including making

good the wall, ceiling and floor etc.

complete. [A] 15 mm.

48 Providing and fixing concealed center 780.000 Rmt 249.72

point to wall ceiling & floor CPVC

(SDR 13.5) PIPE having National

Sanitation Foundation (NSF) seal for

potable water of following dia. nominal bore

tube fittings and clamps including making

good the wall, ceiling and floor etc.

complete. [C] 25 mm.

Description of Item (with brief

Rate in Total

Item No. specification and reference to book of Quantity Unit

Figures Amount

specifications)

49 Providing and fixing concealed center 1040.000 Rmt 442.04

point to wall ceiling & floor CPVC

(SDR 13.5) PIPE having National

Sanitation Foundation (NSF) seal for

potable water of following dia. nominal bore

tube fittings and clamps including making

good the wall, ceiling and floor etc.

complete. [E] 40mm.

50 Providing and fixing concealed center 480.000 Rmt 653.77

point to wall ceiling & floor CPVC

(SDR 13.5) PIPE having National

Sanitation Foundation (NSF) seal for

potable water of following dia. nominal bore

tube fittings and clamps including making

good the wall, ceiling and floor etc.

complete.[F] 50mm.

51 Providing laying and jointing in true line and 1040.000 Rmt 72.65

level 15 mm dia. U.P.V.C. Pipe (SCH -

40) line including fittings of approved or

equivalent brand as apprroved by Engineer

In charge. Pipe shall be fixed on the wall

with the help of clamp at every two meter

C/C or shall be concealed as directed

including necessary fittings etc. including

testing of pipe and joints and fixing the same

with adhesive solvent, including cost of

all materials.

Description of Item (with brief

Rate in Total

Item No. specification and reference to book of Quantity Unit

Figures Amount

specifications)

52 Providing laying and jointing in true line and 1040.000 Rmt 91.84

level 25 mm dia. U.P.V.C. Pipe (SCH -

40) line including fittings of approved or

equivalent brand as apprroved by Engineer

In charge. Pipe shall be fixed on the wall

with the help of clamp at every two meter

C/C or shall be concealed as directed

including necessary fittings etc. including

testing of pipe and joints and fixing the same

with adhesive solvent, including cost of

all materials.

53 Providing laying and jointing in true line and 800.000 Rmt 148.12

level 40 mm dia. U.P.V.C. Pipe (SCH -

40) line including fittings of approved or

equivalent brand as apprroved by Engineer

In charge. Pipe shall be fixed on the wall

with the help of clamp at every two meter

C/C or shall be concealed as directed

including necessary fittings etc. including

testing of pipe and joints and fixing the same

with adhesive solvent, including cost of

all materials.

54 Providing laying and jointing in true line and 800.000 Rmt 195.67

level 50 mm dia. U.P.V.C. Pipe (SCH -

40) line including fittings of approved or

equivalent brand as apprroved by Engineer

In charge. Pipe shall be fixed on the wall

with the help of clamp at every two meter

C/C or shall be concealed as directed

including necessary fittings etc. including

testing of pipe and joints and fixing the same

with adhesive solvent, including cost of

all materials.

Description of Item (with brief

Rate in Total

Item No. specification and reference to book of Quantity Unit

Figures Amount

specifications)

55 Providing and fixing gun metal check or non 208.000 No 186.83

return full way Handle valve. Zoloto or

equivalent make ( A ) 15 mm dia.

56 Providing and fixing gun metal check or non 208.000 No 420.63

return full way Handle valve. Zoloto or

equivalent make ( C ) 25 mm dia.

57 Providing and fixing gun metal check or non 52.000 No 663.43

return full way Handle valve. Zoloto or

equivalent make ( E ) 40 mm dia.

58 Providing and fixing gun metal check or non 39.000 No 2106.86

return full way handle valve. Zoloto or

equivalent make ( E ) 50 mm dia.

59 Providing and fixing gun metal check or non 39.000 No 2285.13

return full way handle valve. Zoloto or

equivalent make ( E ) 65 mm dia.

60 Providing and fixing to wall ceiling floor 780.000 Rmt 277.43

10.0 Kg. F/Cm2 working pressure

polythene pipes of approved or equivalent

brand for soil waste and ventilating pipes

of the following outside dia. low

density, complete with necessary fittings

,wall clamps etc including making good

the wall ceiling and floor. (F) 75 mm

Description of Item (with brief

Rate in Total

Item No. specification and reference to book of Quantity Unit

Figures Amount

specifications)

61 Providing, Laying and jointing in true line 300.000 Rmt 697.89

and level U.P.V.C. 75mm pipe (SCH-80) of

following dia. Including fittings as approved

by Engineer-in-charge. Pipe shall be fixed

on the wall with the help of Z Patti at every

2000 mm center to center or shall be

concealed as directed including necessary

fittings etc. including testing of pipe and

joints and fixing the same with adhesive

solvent, including cost of all materials.

62 Providing, Laying and jointing in true line 30.000 Rmt 805.82

and level U.P.V.C. 65mm pipe (SCH-80) of

following dia. Including fittings as approved

by Engineer-in-charge. Pipe shall be fixed

on the wall with the help of Z Patti at every

2000 mm center to center or shall be

concealed as directed including necessary

fittings etc. including testing of pipe and

joints and fixing the same with adhesive

solvent, including cost of all materials.

63 Providing, Laying and jointing in true line 120.000 Rmt 1285.73

and level U.P.V.C. 50mm pipe (SCH-80) of

following dia. Including fittings as approved

by Engineer-in-charge. Pipe shall be fixed

on the wall with the help of Z Patti at every

2000 mm center to center or shall be

concealed as directed including necessary

fittings etc. including testing of pipe and

joints and fixing the same with adhesive

solvent, including cost of all materials.

Description of Item (with brief

Rate in Total

Item No. specification and reference to book of Quantity Unit

Figures Amount

specifications)

64 Providing laying and jointing in true line and 200.000 Rmt 764.28

level 90 dia. P.V.C. SWR (Type 'B') with one

end plain and other end socketed with

rubber ring , pipe and fittings conforming to

IS 13592 of the make as approved by

Engineer In Charge. pipe shall be fixed on

the wall with the help of Z clamp at every

two metre C/C or shall be concelled as

directed including necessary fittings such as

bends, tee, shoes etc. including testing of

pipe and joints and fixing the same with

PVC Clamp with adhesive solvent cement

including cost of all material.

65 Providing laying and jointing in true line and 1120.000 Rmt 835.15

level 110 diameter U.P.V.C. SWR Type B

pipe confirming to IS 13592-1992 with

one end plain and other end socketed

with rubbering, & fitting conforming to ISI

14735-1999 of approved make for

drainage system pipe line, pipe shall be

jointed with each other with rubber

lubricant, pipe shall be fixed on wall using

of PVC clamp of the size 110 mm diameter

x 149 mm length x 145 mm high at every

2000 mm centre to centre or shall be

concealed in walls as directed including

necessary fittings such as bends, shoes

etc. including testing of pipes and joints

and jointed with adhesive solvent cement

including cost of all materials.

Description of Item (with brief

Rate in Total

Item No. specification and reference to book of Quantity Unit

Figures Amount

specifications)

66 Providing laying and jointing in true line and 300.000 Rmt 831.22

level 160 diameter U.P.V.C. SWR Type B

pipe confirming to IS 13592-1992 with

one end plain and other end socketed

with rubbering, & fitting conforming to ISI

14735-1999 of approved make for

drainage system pipe line, pipe shall be

jointed with each other with rubber

lubricant, pipe shall be fixed on wall using

of PVC clamp of the size 110 mm diameter

x 149 mm length x 145 mm high at every

2000 mm centre to centre or shall be

concealed in walls as directed including

necessary fittings such as bends, shoes

etc. including testing of pipes and joints

and jointed with adhesive solvent cement

including cost of all materials.

67 Providing and fixing PVC SWR Nahni Trap 312.000 No 571.08

IS 14735 for drain - 100 mm diameter with

jali of the following nominal diameter of

self cleansing design with C.I. screwed

down or hinged grating including the cost of

cutting and making good the walls.

68 Providing and fixing 15 mm diameter SOLO 210.000 No 1770.53

Chromium plated angular shape bib cock

with wall flangeas approved by Engineer in

69 Providing and fixing high quality Brand 210.000 No 1799.82

Angle cock 15 mm dia with wall flange

including labour charge etc. complete as per

instruction of Engineer In Charge.

Description of Item (with brief

Rate in Total

Item No. specification and reference to book of Quantity Unit

Figures Amount

specifications)

70 Providing and fixing Solo concealed Stop 208.000 No 1190.49

cock, Regular Body with adjustable wall

flange of 15 mm diameter of the approved

by Engineer in Charge.

71 Providing and fixing high quality Overhead 54.000 No 2032.63

shower with arm and wall flange including

labour charge etc. complete as per

instruction of Engineer In Charge.

72 Providing & fixing 3-inlet single lever 54.000 No 5923.65

concealed diverter of brass, complete with

concealed body and trim kit, for mixing hot &

cold water and diverting to shower/hand

shower/spout, in Antique Copper finish,

including all fittings, commissioning,

complete as required. as per directed by

Architech or Engineer-in-charge etc.

complete. for All Floor

73 Providing and fixing flat back Wash basin 54.000 No 6748.32

Approved Quality, Table top mounted 550 x

400 mm size Mario Starwhite or equivalent

with C.I. or M.S. bracket including cutting

holes and making good the same including

fixing C.P. brass Approved Quality Brand

Pillar Cock High Quality, Approved Quality

Brand Angular stop Cock , C.P. brass

extension nipple 62 mm long, S.S. flange

water super connection pipe 60cm. long and

full thread waste coupling High Quality etc.

Description of Item (with brief

Rate in Total

Item No. specification and reference to book of Quantity Unit

Figures Amount

specifications)

74 Providing and fixing wash down wall hung 54.000 No 17219.49

water closet (European type) High Quality

Approved Brand croma pan with integral 'P'

trap jointed within C.I pipe in C:M 1:1

including matching seat cover, chair braket,

Conceled metropole of High Quality

Approved, 2 way bibcock of High Quality

Approved, health foucet / jet spray of High

Quality Approved with 1 m extension pipe,

toilet paper holder of High Quality Approved

with all accessories etc. complete.

75 Providing and fixing P.V.C. water tank of 25000.000 Liter 10.53

triple layer white colour as approved by

engineer in charge etc. comp. on terrace.

76 Providing and fixing S.W. Gully trap with 24.000 No 1175.15

brick masonry chamber & water tight fiber

reinforced cover with frame of 300 mm x

300 mm x 50 mm.size having cover weight

2.50 kg & frame weight 7 kg [I] Square

mouth trap (A) 160 mm. x 110 mm. size P-

type or R type.

77 Providing, laying and jointing in true line and 150.000 Rmt 2598.73

level 200 diametre .P.V.C (6 kg.') with one

end plain and other end socketed with

rubber ring conforming to IS 13592 pipe as

equivalent as approved by Engineer in

charge for drainage Pipeline, pipe shall be

jointed with each other with rubber lubricant,

pipe shall be laying in trenches as directed

including necessary fittings such as bends,

shoes etc. including testing of pipes and

joints and jointed with adhesive solvent

cement including cost of all materials.

Description of Item (with brief

Rate in Total

Item No. specification and reference to book of Quantity Unit

Figures Amount

specifications)

78 Constructing brick masonary chamber of 25.000 No 5204.53

500 mm x 700 mm inside dimension and

depth upto 0.45 m for under ground CI

inspection chamber and bends with bricks

having crushing strength not less than

Kg/Sqmt. in CM. 1:5 precast fibre reinforced

concrete frame & cover of square frame of

approx 455x610x150mm & round cover

75mm thick, RCC top slab CC 1:2:4 (

cement : 2 coarse sand : 4 graded stone

aggregate 20 mm nominal size ) foundation

concrete 1:5:10 inside plaster 15 mm thick

with cement mortar 1:3 finished smooth with

a floating coat of neat cement on walls and

bed concrete etc. complete.

79 Extra over for every additional depth of 20.000 No 242.39

0.10m or part thereof beyond 0.45 m depth

for brick masonry chamber. (II) For 500 mm

80 Providing and laying in trenches 6 Kgf/sqmt. 90.000 Rmt 957.48

working pressure I.S.I. mark PVC SWR pipe

of 160 mm dia low density pipe including

fitting etc complete in ground.

Description of Item (with brief

Rate in Total

Item No. specification and reference to book of Quantity Unit

Figures Amount

specifications)

81 Constructing Manhole with R.C.C. top slab 10.000 No 11029.97

in 1:2:4 mix (1-cement : 2-coarse sand :

4-graded stone aggregate 20mm nominal

size) foundation concrete 1:3:6 mix (1-

cement : 3- coarse sand :6-Brick bats 40 +

50mm size) inside plastering 15mm thick

with Cement Mortar 1:5 (1-Cement : 5-

coarse sand) finished with a floating coat

of neat cement and making channels in

cement concrete 1:2:4 mix (1- Cement :2-

Coarse sand :4-stone aggregate 20mm

nominal size) finished smooth complete

including curing and finishing (i) Inside size

900mm x 1200mm and 1.5M. deep

including C.I. cover with frame size

560mm diameter total weight of cover

and frame to be not less than 128 kgs.

(Wt. of cover 64 Kg. and Wt. of frame

64 Kg.)(A) With 230mm thick walls of

brick masonry

using brick having crushing strength not

less than 35Kg. / Sq.cm. in Cement Mortar

1:5 1- Cement: 5-Coarse sand) (1) A type

depth 0.90 Metre for 150mm diameter

Description of Item (with brief

Rate in Total

Item No. specification and reference to book of Quantity Unit

Figures Amount

specifications)

82 Providing and fixing 90 cm Height Stainless 381.000 Rmt 4385.52

Steel Railing made from anticorrocive

grade S S pipe of 50 mm dia (16 Gauge) as

hand rail with S S 316 grade Baluster of

mm dia (16 Gauge) as a vertical support

fixed in RCC slab at 1.2m c/c including

three horizontal S S pipes of 25 mm dia (16

Gauge) at eqal distance fixed by 18.75 mm

dia (16 Gauge) S S pipe with baluster

including accessories as per detailed

drawing as per directed by Architech or

Engineer-in-charge etc. complete. for All

Floor Level.

83 Providing and fixing 30 cm Height Stainless 251.000 Rmt 2164.03

Steel Hand Railing made from anticorrocive

316 grade S S pipe of 50 mm dia (16

Gauge) as hand rail with S S 316 grade

Baluster of 40 mm dia (16 Gauge) as a

vertical support fixed in RCC member at

1.2m c/c S S pipe with baluster including

accessories as per detailed drawing as per

directed by Architech or Engineer-in-charge

etc. complete. for All Floor Level.

84 Supplying and fixing SFRC (Steel Fiber 25.000 No 2979.50

Reinforced Concrete) M.H. Jali / Cover of

5/10/15 MT Load capacity as per I.S.

part I & II and size of frame and cover/jali

size 3 x 2/ 2.5 x 2 Sq.ft including loading

and unloading etc. complete.

85 Providing and fixing PVC Cowl vent of 16.000 No 501.87

following dia etc complete as directed

(A) 100 mm Dia

Description of Item (with brief

Rate in Total

Item No. specification and reference to book of Quantity Unit

Figures Amount

specifications)

86 Providing and fixing chicken mesh jali with 3812.000 Sqm 251.25

square of 25 gauge at junction the

masonary and RCC member including

necessary scafolding, labour etc.complete

for all floors.

87 Providing cement vata (10cm. x 10 cm. size) 939.000 Rmt 23.68

quarter round in cement mortar 1:1

including neat cement finishing, watering

etc. complete.

88 Providing & fixing stainless steel block 2400.000 Inch 136.35

letters up to 12" height size including

radiam character as per the details & design

given by Engineer-in-charge inluding

scaffolding etc. complete

89 Providing & fixing Stainless steel Name 3456.000 Sq.In 35.35

plate including colour iching the character

on the plate as per requirement & design

given by engineer in charge incl. scaffolding

etc. complete.

Description of Item (with brief

Rate in Total

Item No. specification and reference to book of Quantity Unit

Figures Amount

specifications)

90 Providing & Fixing Sandwich type Platform 147.000 Sqm 6925.73

of 600 mm wide using Top 18 mm thick

granite of approved shade and sample and

bottom 25 mm thick single side Polished

kota stone with 25 mm thick screed of

cement mortar 1:3 With granite Facia Patti

and vertical End granite supports. The stone

shall be fixed by chassing in to the wall

surface and supported vertically with 25mm

thick sandwich kota stone support including

SS Sink of size 610 x 460 mm waste brass

coupling, stainless steel extension nipple,

flexible PVC outlay pipe, Hindware Sink

cock with Casted Swinging Spout F100034

etc complete as suggested by

Architect/Engineer -in-charge.

91 Providing and fixing M.S.clamp made 208.000 No 136.37

from 40mm x 6mm thick M.S.flat as per

design given by Engineer in charge for fixing

the C.I. / G.I. / PVC pipe on wall of duct to

stay away from wall etc. complete.

92 Providing and fixing 5 mm thick mirror of 53.000 No 991.82

approved quality and make size 600 x

mm with moulding edge by using 4.0 mm

thick hard board and fixing on wall with C.

P.brass studs etc. complete. For all floor

Description of Item (with brief

Rate in Total

Item No. specification and reference to book of Quantity Unit

Figures Amount

specifications)

93 Providing and fixing towel rack of (27.2L x 53.000 No 3891.53

65W x 10.2H Centimeters), 600 mm long,

manufactured from high quality brass with

chromium plated finish, complete with

brackets, screws, wall plugs and all

necessary fittings and fixtures, fixed in

position and making good the wall surface

after installation, complete as per

manufacturer's specifications and directions

of Engineer-in-Charge.

94 Providing and fixing 600mm x 120mm glass 53.000 No 566.64

shelf with

C.P. brass bracket and guard rail complete

mixed to wooden plug with C.P. brass

95 Providing and fixing Soap Holder including 53.000 No 725.94

necessary S.S. screw with labour etc.

96 Providing and fixing stainless steel napkin 53.000 No 780.73

ring approved by Engineer - in - charge in

satin finish etc. complete as directed.

Description of Item (with brief

Rate in Total

Item No. specification and reference to book of Quantity Unit

Figures Amount

specifications)

97 Providing and fixing modular readymade 131.000 Sqm 23550.17

assemble type cupboard/Drawer under

kitchen platform with vertical panels of L/B

0.65/0.60, 0.75/0.60 & Horizontal panels of

L/B 0.45/0.60 and of required length and

height as per Architect design / site situation

having Front of laminated exterior garde I

mm thick marine ply coated with 0.8 mm

thick laminated sheet and Bottom & Sides of

exterior garde I 12 mm thick marine ply

coated with 0.8 mm thick laminated sheet,

including soft closing concealed hinges

having cup diameter 35mm, cup depth

12.8mm of the make hettich/ozone, one S.S

tall unit with pullout system having loading

capacity 30 kg, one S.S basket forcutlery,

one S.S basket for cup saucer, one S.S

basket for thali & one S.S basket for general

purpose all S.S basket of the make Hettich/

Enox/Ozone with soft closing channel of the

make Hettich / Ozone as approved by

Engineer in charge with lightly brushed

stainless steel finish alluminium J profile

Handle & other miscellaneous hardware

including all transporatation, loading,

unloading, labour etc. complete inclusive of

all taxes, etc. complete as directed by

Engineer in Charge.

Description of Item (with brief

Rate in Total

Item No. specification and reference to book of Quantity Unit

Figures Amount

specifications)

98 Providing and fixing modular readymade 375.000 Sqm 3597.62

type cupboard Shutter/ Drawer of required

length, width and height as per Architect

design / Situation cupboard of 19mm thick

exterior garde I marine ply coated with

mm thick laminates on both side, including

soft closing concealed hinges having cup

diameter 35mm, cup depth 12.8mm of the

make hettich/ozone, two drawers consist of

12mm thick exterior grade marine plwood

with front side with 0.8 mm thick laminates

on both sidewith soft closing channel of the

make Hettich/ Ozone as approved by

Engineer in charge with lightly brushed

stainless steel shall be naminated with

0.8mm thick lamination of approved brand,

pattern and colour, for numbers of stainless

steel AISI 316 grade cabinet handles of A-

10 shape of the 6mmx160mm of the make

KICH/ D-Line/ Gaze approved by Engineer

in Charge a the other miscellaneous

hardware of approved make including

transportation, loading, unloading, labour

etc. complete inclusive of all taxes, etc.

complete as directed by Engineer in

99 Providing and Fixing S.S. Rod , Bracket and 359.000 Rmt 1231.19

socket with all req. hardware materials with

all labour etc complete as directed by

approval of all the items done by EIC.

Description of Item (with brief

Rate in Total

Item No. specification and reference to book of Quantity Unit

Figures Amount

specifications)

100 Providing and fixing Hilty Bolt 8 x 100 mm 1248.000 No 168.42

with drilling in granite door and window

frame etc complete as per direction of

Engineer in-charge.

101 Providing and laying in position Rebar as 2000.000 No 162.61

specified in true line & level including drilling

adequate hole, cleaning the same, grouting

with HY - 200 rebar system as per

manufacturers specifications strictly in

accordance with structural details having

minimum depth of embedment 125, etc

complete For all floors (a) 10 to 12 mm dia

102 Providing and laying 18 mm thick (Average) 394.000 Sqm 2365.52

machine polished Black or colour Granite

stone Shelves / Washbasin Plateform in

single piece including fixinng in position in

cement mortar 1 : 3 ( 1 cement : 3 coarse

sand ) laid over and jointed with grey

cement slurry including rubbing and

polishing and half round moulding etc.

complete. with aproved colour, shade and

size by Architect or Engineer in charge for

all floors.

103 Charges for making holes from 50mm to 63.000 rmt 1742.25

160 mm dia in RCC wall, slabs or any other

RCC members by diamond core cutting

machine or equivalent including disposing

the debris. For all floors .

Description of Item (with brief

Rate in Total

Item No. specification and reference to book of Quantity Unit

Figures Amount

specifications)

104 Providing and fixing fix louvers: 114 mm 470.000 Rmt 2404.31

wide G.I. sheet having thickness of 0.55 mm

& weight not less than 490 gm /meter, roll

formed to create 84 mm wide louver snap

fixed on special shaped G. I. Channel. Fix

louvers & Channels shall finished with

powder coating of 55 micron per detailed

drawing and as directed by Engineer in

charge etc. complete.

105 Providing and laying chequered precast 591.000 Sqm 528.01

cement concrete tiles 22mm thick with

aggegate of sizes upto 6mm in floors, treads

of steps and landings on 20mm thick bed of

C.M.1:6 (1-cement :6-sand) or L.M.1:1.5 (1

Lime putty :1.5coarse sand) joint with neat

cement slurry with pigments to match the

shade of the tiles.

Description of Item (with brief

Rate in Total

Item No. specification and reference to book of Quantity Unit

Figures Amount

specifications)

106 Providing and fixing loft storage unit with 63.000 Sqm 2929.21

front shutters and internal shelving of

required length,width with Proper alignment,

leveling,and height as per Architect design /

Situation Loft cabinet framework made from

25x50x19mm thick exterior garde I marine

ply coated shutters made from 19mm thick

exterior garde I marine ply with 0.8 mm

thick laminate finish on both side,Shutters

as per drawing (multiple panels), with

groove/line pattern if required. Horizontal &

Vertical wooden shelves inside loft made

from 12 mm thick exterior garde I marine

ply, finished with 0.8 mm thick laminate on

exposed surfaces, including soft closing

concealed hinges having cup diameter

35mm, cup depth 12.8mm of the make

hettich/ozone, six numbers of stainless steel

AISI 316 grade cabinet handles approved

by Engineer in charge All exposed edges

finished with PVC edge

banding.and the other miscellaneous

hardware of approved make including

transportation,loading,unloading,labour

etc.complete inclusive of all

taxes,etc.complete as directed bt Engineer

in charge.

Description of Item (with brief

Rate in Total

Item No. specification and reference to book of Quantity Unit

Figures Amount

specifications)

107 Providing, supplying, and installing SUPER 1.000 No 109936.48

5G-AQUA Natural Water Conditioning

System of 2” (50 mm) diameter, made of

high-quality, corrosion-resistant material,

designed for installation in the main water

supply line between the

overhead/underground tank outlet and

distribution pipeline. The unit shall operate

on a non-electric, catalytic conditioning

principle, requiring no chemicals, salt, or

external power. It shall be capable of

reducing scaling effects and improving

water quality for domestic use. The system

shall be complete with all necessary fittings,

connectors, supports, and accessories,

including cutting, jointing, testing, and

commissioning, ensuring leak-proof

performance as directed by the Engineer-in-

108 Providing and fixing 15 mm dia Ball Valve as 8.000 No 1084.54

per direction and instruction of Engineer

109 Providing and applying black japan 486.000 Sqm 86.39

treatment of approved make and quality in

two coats with uniform finish and complete

coverage, over prepared surface free from

dust, grease, or loose particles. Surface

shall be cleaned thoroughly before

application. The treatment shall be applied

with brushes only as per manufacturer's

specifications and allowed to dry between

Description of Item (with brief

Rate in Total

Item No. specification and reference to book of Quantity Unit

Figures Amount

specifications)

110 Providing and fixing Fire Resistnce Single 9.000 Sqm 5604.24

Shutter made from Powder Coated

Galvanized Steel Shutters confirming to

IS 2202 & ISI approved manufacturer

of approved colour, pattern and design by

the Architect, and with necessary hardware

high SS Hinges, door closer, lock, hinges,

panic bar and other Fixtures and locking

arrangements as per detailed drawings / as

directed and approved by the Architect and

Engineer In-charge etc. complete.

111 Providing and applying high performance 338.000 sqm 603.31

solar reflective waterproof coating for roof

(Acrylate With PU) Highly Flexible Resisting

crack of approved make and quality in

primer coat + two coats with uniform finish

and complete coverage, over prepared

surface free from dust, grease, or loose

particles. Surface shall be cleaned

thoroughly before application. The treatment

shall be applied with brushes only as per

manufacturer's specifications and allowed to

dry between coats.

112 Providing and Fixing concealed 25 mm 104.000 No 3214.33

Control Valve as approved by Engineer in

Chage including all Fixture &

Fastening,Labour chrges as per direction

and instruction of Engineer incharge

Description of Item (with brief

Rate in Total

Item No. specification and reference to book of Quantity Unit

Figures Amount

specifications)

113 Providing and Fixing 15 mm thick 300 mm x 91.800 No 1209.48

300 mm Tactile Warning Tiles (Attention

Tiles i.e. Tactile Warning Surface Indicator

{TWSI}) of Johnsan Endura Tac Button

Yellow Plus or equvqlent make in flooring

laid on 20 mm thick cement mortar 1:6 (1

cement : 6 coarse sand) on new surface

and jointed with cement slurry including

finished with flush pointing & cleaning the

surface for all floors as per detailed drawing

etc. complete as directed by Architect or

Engineer in charge. Thse tiles shall be Anti

Skid, Chemical Resistant, Fade Proof, Frost -

Heat & Weather Proof, High Flexural

Strength, Highly Durable, Stain Resistance .

All Tactile Warning Tiles meet the specific

size and dimension standards as required

by ISO/FDIS 23599. as per directed

engineer in-charge. For All Floor

114 Box cutting the road surface to proper slope 666.000 Cu.m 102.93

and chamber for making a base for road

work including removing the excavated staff

and depositing on the road side slope as

directed upto All lead.

115 Filling in plinth with sand under floors 165.000 Cu.m 460.19

including watering, ramming consolidating

and dressing etc. complete.

Description of Item (with brief

Rate in Total

Item No. specification and reference to book of Quantity Unit

Figures Amount

specifications)

116 Providing and laying, spreading and 322.000 Cu.m 2207.86

compacting B.T.M.C. stone aggregates of

63mm to 40mm size to Water Bound

Macadam including spreading in uniform

thickness, hand packing, rolling with

vibratory roller 8-10 tones to proper grade

and camber, applying and brooming

requisite type of screening / binding / filler

materials to fill up the interstices of coarse

aggregate, watering and compacting to the

required density. Grading - II using

screening type - A (13.2mm Agg.) etc.

117 Providing & Laying M 250 grade RMC 220.000 Cu.m 5887.29

concrete without fly ash trimix using

P21(water reducing concrete admixture at

100 ml per bag of cement & recron 3 s fiber

at 125 gm per bag of cement including

making C channel 75 x 75 mm required to

maintain level, slope and thickness of the

concrete road leveling of placed concrete

with surface vibrator and finishing with

power floater & trowel light brooming the

surface & including Construction joints to be

formed at every 5 mt distance by grooving

with mechanical saw within 48 hrs.

Groove/sawed joints shall be made of 5 mm

width and depth min (1/3 rd depth of the

pavement) as shown in the drawing and

shall be filled with ready to use PU sealant

of UV grade cutting & filling of expansion

joint as directed by Engineer in charge.

Description of Item (with brief

Rate in Total

Item No. specification and reference to book of Quantity Unit

Figures Amount

specifications)

118 Providing and Fixing Structural Steel of M.S. 30750.000 Kg 85.95

Hollow section pipe of fabrication work

including using Anchor fastner, Bolt for

support, safety bars for using all type of

section of any circular, square hollow pipe of

any diameter and any thickness of any

desired shape and size etc. comp.

119 Steel work welded, in built up sections, 728.000 Kg 84.13

framed work including cutting, hoisting,

fixing in position and applying a priming coat

of red lead paint (A) In beams and joists,

channels, angles, tees, flats with connecting

plates or angle cleats as in main & cross

beamnship & jack rafters, purlins connected

to common rafters and like.

120 Providing and fixing of Ridge flashing for 1020.000 Sq.m 858.67

roof panel shall be made out of 0.5 mm thick

pre coated GI sheet . The Precoated sheet

shall be of minimum 240 mpa steel grade

confirming to IS 14246:1995 and shall have

zinc coating of minimum 120 gsm as per

IS:277:1992 , 5-7 microns epoxy primer on

both side of the sheet and polyester top coat

15-18 micron. The PPGI Sheet shall have

plastic protective guard film of minimum

microns to avoid scratches during

transportation. The ridge shall be fixed to

the steel members by pop rivet or self

drilling/self stitching fastners @ maximum

450 mm c/c along length of capping/flashing

etc complete .

Description of Item (with brief

Rate in Total

Item No. specification and reference to book of Quantity Unit

Figures Amount

specifications)

121 Painting three coats (one coat of priming 500.000 Sq.m 122.49

coat + two coats of enamel paint) on new

steel and other metal surface with enamel

paint including preparing the surface by

throughly cleaning, oil, grease, dirt and

other foreign matter and scoured with

brushes fine steel wood, scrapers and sand

paper etc. comp.

122 Drilling of bore hole an alluvial strata by mud 300.000 Rmt 600.95

flush direct rotary ring size 250mm-300mm

123 Reaming of 250-300 mm dia.pilot boer hole 300.000 Rmt 366.63

including assembling lowering housing

casing strainer pipe gravel packing

etc.complete size 550mm diameter.

124 Manufacture, supply and delivery of ISI 250.000 Rmt 3605.70

marked ERW M.S. pipes conforming to IS:

4270/2001 with latest amendment in rendom

length of 4 to 7 meter size 250mm diameter

(minimum 7.10mm thickness)

125 Manufacture, supply and delivery of cage 60.000 Rmt 3088.58

type Trapezoidal shape ('V') wire wound low

carbon, Galvanized screen pipe confirming

IS: 8110 GWSSB R/C (E) 250 mm dia (1)

Having Size of 1.0 mm slot (Heavy Grade).

126 Manufacture, supply and delivery of cage 15.000 Rmt 2001.82

type Trapezoidal shape ('V') wire wound low

carbon, Galvanized screen pipe confirming

IS: 8110 GWSSB R/C (D) 200 mm dia (1)

Having Size of 1.0 mm slot (Heavy Grade).

Description of Item (with brief

Rate in Total

Item No. specification and reference to book of Quantity Unit

Figures Amount

specifications)

127 Clamps made from M.S plate with 3 no`s 1.000 Pair 2037.91

hole either side with nuts & boltd of

standarad make size 900mm x 100mm x

16mm suitable for 250mm diameter pipe.

128 Bore plug having 100mm height made from 1.000 No 1161.62

M.S plate with 3 no`s holes at equal distace

on circumference for nut bolts type locking

arrangements with nut bolts & lock nuts of

standarad make complete from 5mm thick

M.S plate (for top also) suitable 250mm

diameter pipe.

129 Supply of ISI marked portland cement of 1.000 Ton 5286.34

store or site of works including all tax with

loading, unloading, freight etc. complete as

130 Supply of misc bore materials like steel 300.000 No 91.71

bent plate suitable for ERW pipe of dia

mm of size 200m X 150mm X 6mm.

131 Supply of well sorted "Sevalliya" gravels of 40.000 Cmt 2049.29

size 40 mm to 63 mm including carting

loading, unloading & stacking at site of work.

132 Supply of clay ball having size of 25mm to 40.000 Cmt 758.51

50mm from Sicky Clay at site of work as

certified by hydrologist.

133 Cement seiling if necessary including the 1.000 Job 13405.73

cost of cement by means of mud pump.

134 Charges of electrologging test of bore 1.000 Job 18180.00

hole.Uptron make electrologger.

Description of Item (with brief

Rate in Total

Item No. specification and reference to book of Quantity Unit

Figures Amount

specifications)

135 Lowering and removing of 100mm dia.drop 1.000 Job 27720.46

line and 32mm dia air line for development

of each water bearing zones comes across

upto the full depth of deep tube well size

200mm/250mm/300mm dia. For the tube

well having depth of 186 meters and above

through suitable air compressor.The job is

for complete period of development of tube

well without air compressor charges. (Min

Hrs. & upto Sand free discharge)

136 Charges of air compressor of 900 CFM/200 12.000 Hour 8499.15

PSI including all the require accessories and

machinaries.(Min 6hr. & upto sand free

discharge)

137 Geohydrological ground water investigation 1.000 Bore 14428.86

(with vehicle charges) deep tube well (with

water sample testing) for 200mm/250mm

diameter deep tube well (with water sample

chemical Analysis).

138 Heavy Duty clamps made from 4" x 1.5" iron 2.000 No 282.80

strin suitable for column pipe 1.5" to 2"

length. (E) 100mm (4") dia. Pipe.

139 Supplying and erecting CI Swing check type 1.000 No 2868.40

non-return (Reflux) valve ISI marked

suitable for 100mm dia.

140 Supplying & Erecting Mild Steel heavy duty 8.000 No 212.10

Flanges with rubber packing and hardware

materials for pipe connections suitable for

141 Supplying & erecting G.I. Bend for pipe 4.000 No 548.43

connection suitable for (g) 100 mm (4")

Description of Item (with brief

Rate in Total

Item No. specification and reference to book of Quantity Unit

Figures Amount

specifications)

142 Extra over for every additional depth of 8.000 No 2648.62

0.10m or part thereof beyond 0.45 m depth

for brick masonry chamber. (II) For 500 mm

143 Constructing manhole with R.C.C top slab in 5.000 No 19789.94

1:2:4 mix (1 cement : 2 coarse sand :

graded stone aggregate 20 mm nominal

size) foundation concrte 1:3:6 mix (1 cement

: 3 coarse sand : 6 brick bats 40 to 50 mm

nominal size) inside plastering 15 mm thick

with cement mortar 1:3 (1 cement : 3 coarse

sand) finished with a floating coat of neat

cement slurry and making channels in

cement concrte 1:2:4 mix ( 1 cement :

coarse sand : 4 stone aggregate 20 mm

nominal size) finished smooth complete

including curing & testing (I) Inside size

mm x 1200 mm and 1.50 meter deep

including SFRC cover with frame size

mm diameter (A) with 230 mm thick walls of

brick masonry using bricks having crushing

strength not less than 35 Kg / Sqcm in

cement mortar 1:5 (1 cement : 5 coarse

sand) (2) B-type depth 1.50 meter for

mm diameter sewer.

Description of Item (with brief

Rate in Total

Item No. specification and reference to book of Quantity Unit

Figures Amount

specifications)

144 Constructing manhole with R.C.C top slab in 5.000 No 23900.64

1:2:4 mix (1 cement : 2 coarse sand :

graded stone aggregate 20 mm nominal

size) foundation concrte 1:3:6 mix (1 cement

: 3 coarse sand : 6 brick bats 40 to 50 mm

nominal size) inside plastering 15 mm thick

with cement mortar 1:3 (1 cement : 3 coarse

sand) finished with a floating coat of neat

cement slurry and making channels in

cement concrte 1:2:4 mix ( 1 cement :

coarse sand : 4 stone aggregate 20 mm

nominal size) finished smooth complete

including curing & testing (I) Inside size

mm x 1200 mm and 1.50 meter deep

including SFRC cover with frame size

mm diameter (A) with 230 mm thick walls of

brick masonry using bricks having crushing

strength not less than 35 Kg / Sqcm in

cement mortar 1:5 (1 cement : 5 coarse

sand) (3) C-type depth 2.25 meter for

mm diameter sewer.

145 Extra rate for constructing B.B masonry for 5.000 Each 522.96

every additional depth 0.10 meter or part

thereof over item 24.27 (I) for depth from

0.90 meter to 1.50 meter.

146 Extra rate for constructing B.B masonry for 5.000 Each 397.19

every additional depth 0.10 meter or part

thereof over item 24.27 (II) for depth from

1.50 meter to 2.25 meter.

147 Extra rate for constructing B.B masonry for 5.000 Each 550.40

every additional depth 0.10 meter or part

thereof over item 24.27 (III) for depth from

2.25 meter to 3.15 meter.

Description of Item (with brief

Rate in Total

Item No. specification and reference to book of Quantity Unit

Figures Amount

specifications)

148 Providing and laying (To level or slopes) 500.000 Rmt 665.48

and jointing reinforced concrte heavy duty

Non-pressure pipes I.S Class NP2 of the

following internal diameter with collars and

butt ends prepared for collar joints including

testing of joints complete. (D) 300 mm

diameter (With Main Gutter line shifting)

149 Providing and laying (To level or slopes) 150.000 Rmt 1060.59

and jointing reinforced concrte heavy duty

Non-pressure pipes I.S Class NP2 of the

following internal diameter with collars and

butt ends prepared for collar joints including

testing of joints complete. (E) 450 mm

150 Providing, laying and jointing in true line and 200.000 Rmt 2824.97

level 250 diametre .P.V.C (6 kg.') with one

end plain and other end socketed with

rubber ring conforming to IS 13592 pipe as

equivalent as approved by Engineer in

charge for drainage Pipeline, pipe shall be

jointed with each other with rubber lubricant,

pipe shall be laying in trenches as directed

including necessary fittings such as bends,

shoes etc. including testing of pipes and

joints and jointed with adhesive solvent

cement including cost of all materials.

151 Charges for making holes from 300 mm to 5.000 Rmt 2903.75

450 mm dia in earthwork of all kind of soil by

diamond core cutting machine of HILTI or

equivalent including disposing the debris for

all lead and lift.

Description of Item (with brief

Rate in Total

Item No. specification and reference to book of Quantity Unit

Figures Amount

specifications)

152 Providing Graded Filter media for purpose 18.000 Cum 1263.81

of rain water harvesting in pit around bore

pipe using aggregate of size 40mm , 20mm,

10mm and coarse sand in layers of in

thickness as per instructions of engineer

153 Drilling of bore hole an alluvial strata by mud 400.000 Rmt 600.95

flush direct rotary ring size 250mm-300mm

154 Providing laying and jointing in true line and 400.000 Rmt 898.90

level 200 diameter P.V.C. Strainer Pipe

confirming to IS 13592-1992 with one end

plain and other end socketed with rubbering,

& fitting conforming to ISI 14735-1999 of

approved make for Rain water harvesting

system pipe line, pipe shall be jointed with

each other with rubber lubricant, including

necessary fittings such as bends, shoes etc.

including testing of pipes and joints and

jointed with adhesive solvent cement

including cost of all materials.

Description of Item (with brief

Rate in Total

Item No. specification and reference to book of Quantity Unit

Figures Amount

specifications)

155 Supply, Installation, Testing and 150.000 Rmt 2109.00

Commissioning of the following GI pipes

HEAVY CLASS, C- CLASSof ISI standard

as per IS: 1239 upto 150 mm dia. and IS:

3589 upto 200 mm dia. and above.

(withcutting, screwing, welding if required)

and providing all structural work fabricated

from standard sections, (GI rounds, angles,

channels etc.), and fittings like flanges,

bends, tees, elbows, reducers, clamps,

hangers, fasteners etc. including cutting

holes and chases in brick / RCC walls /

slabs complete with painting of one coat of

rich zinc primer and 2 or more coats of

synthetic enamel paint of approved make /

shade complete as per specification

complete 150 mm dia

156 Supply, Installation, Testing and 100.000 Rmt 1435.00

Commissioning of the following GI pipes

HEAVY CLASS, C- CLASSof ISI standard

as per IS: 1239 upto 150 mm dia. and IS:

3589 upto 200 mm dia. and above.

(withcutting, screwing, welding if required)

and providing all structural work fabricated

from standard sections, (GI rounds, angles,

channels etc.), and fittings like flanges,

bends, tees, elbows, reducers, clamps,

hangers, fasteners etc. including cutting

holes and chases in brick / RCC walls /

slabs complete with painting of one coat of

rich zinc primer and 2 or more coats of

synthetic enamel paint of approved make /

shade complete as per specification

complete 100 mm dia

Description of Item (with brief

Rate in Total

Item No. specification and reference to book of Quantity Unit

Figures Amount

specifications)

157 Supply, Installation, Testing and 100.000 Rmt 983.00

Commissioning of the following GI pipes

HEAVY CLASS, C- CLASSof ISI standard

as per IS: 1239 upto 150 mm dia. and IS:

3589 upto 200 mm dia. and above.

(withcutting, screwing, welding if required)

and providing all structural work fabricated

from standard sections, (GI rounds, angles,

channels etc.), and fittings like flanges,

bends, tees, elbows, reducers, clamps,

hangers, fasteners etc. including cutting

holes and chases in brick / RCC walls /

slabs complete with painting of one coat of

rich zinc primer and 2 or more coats of

synthetic enamel paint of approved make /

shade complete as per specification

complete 80 mm dia

158 Supply, Installation, Testing and 100.000 Rmt 617.00

Commissioning of the following GI pipes

HEAVY CLASS, C- CLASSof ISI standard

as per IS: 1239 upto 150 mm dia. and IS:

3589 upto 200 mm dia. and above.

(withcutting, screwing, welding if required)

and providing all structural work fabricated

from standard sections, (GI rounds, angles,

channels etc.), and fittings like flanges,

bends, tees, elbows, reducers, clamps,

hangers, fasteners etc. including cutting

holes and chases in brick / RCC walls /

slabs complete with painting of one coat of

rich zinc primer and 2 or more coats of

synthetic enamel paint of approved make /

shade complete as per specification

complete 50 mm dia

Description of Item (with brief

Rate in Total

Item No. specification and reference to book of Quantity Unit

Figures Amount

specifications)

159 Supply, Installation, Testing and 80.000 Rmt 510.05

Commissioning of the following GI pipes

HEAVY CLASS, C- CLASSof ISI standard

as per IS: 1239 upto 150 mm dia. and IS:

3589 upto 200 mm dia. and above.

(withcutting, screwing, welding if required)

and providing all structural work fabricated

from standard sections, (GI rounds, angles,

channels etc.), and fittings like flanges,

bends, tees, elbows, reducers, clamps,

hangers, fasteners etc. including cutting

holes and chases in brick / RCC walls /

slabs complete with painting of one coat of

rich zinc primer and 2 or more coats of

synthetic enamel paint of approved make /

shade complete as per specification

complete 40 mm dia

160 Supply, Installation, Testing and 100.000 Rmt 484.80

Commissioning of the following GI pipes

HEAVY CLASS, C- CLASSof ISI standard

as per IS: 1239 upto 150 mm dia. and IS:

3589 upto 200 mm dia. and above.

(withcutting, screwing, welding if required)

and providing all structural work fabricated

from standard sections, (GI rounds, angles,

channels etc.), and fittings like flanges,

bends, tees, elbows, reducers, clamps,

hangers, fasteners etc. including cutting

holes and chases in brick / RCC walls /

slabs complete with painting of one coat of

rich zinc primer and 2 or more coats of

synthetic enamel paint of approved make /

shade complete as per specification

complete 32 mm dia

Description of Item (with brief

Rate in Total

Item No. specification and reference to book of Quantity Unit

Figures Amount

specifications)

161 Supply, Installation, Testing and 60.000 Rmt 454.50

Commissioning of the following GI pipes

HEAVY CLASS, C- CLASSof ISI standard

as per IS: 1239 upto 150 mm dia. and IS:

3589 upto 200 mm dia. and above.

(withcutting, screwing, welding if required)

and providing all structural work fabricated

from standard sections, (GI rounds, angles,

channels etc.), and fittings like flanges,

bends, tees, elbows, reducers, clamps,

hangers, fasteners etc. including cutting

holes and chases in brick / RCC walls /

slabs complete with painting of one coat of

rich zinc primer and 2 or more coats of

synthetic enamel paint of approved make /

shade complete as per specification

complete 25 mm dia

162 Supply, installation, testing and 5.000 No 3989.50

commissioning 150 mm diameter of C.I.

Butterfly valve (IS:13095, PN 1.6) with

integrally moulded linear of nitrile or EPDM.

Stainless steel Disc & Steam Lever

operated with ISI Marked as required.

163 Supply, Installation, Testing and 4.000 No 7928.50

Commissioning of Cast iron NRV- Dual

plate Check valve (PN 1.6) conforming to

IS:5312 complete with rubber gasket, GI

bolts, nuts, washers etc. as required. (A)

Description of Item (with brief

Rate in Total

Item No. specification and reference to book of Quantity Unit

Figures Amount

specifications)

164 Supply, installation, testing and 5.000 No 2676.50

commissioning 100 mm diameter of C.I.

Butterfly valve (IS:13095, PN 1.6) with

integrally moulded linear of nitrile or EPDM.

Stainless steel Disc & Steam Lever

operated with ISI Marked as required.

165 Supply, Installation, Testing and 4.000 No 3504.70

Commissioning of Cast iron NRV- Dual

plate Check valve (PN 1.6) conforming to

IS:5312 complete with rubber gasket, GI

bolts, nuts, washers etc. as required. (A)

166 Supply, installation, testing and 4.000 No 2363.40

commissioning 80 mm diameter of C.I.

Butterfly valve (IS:13095, PN 1.6) with

integrally moulded linear of nitrile or EPDM.

Stainless steel Disc & Steam Lever

operated with ISI Marked as required.

167 Supply, Installation, Testing and 3.000 No 3242.10

Commissioning of Cast iron NRV- Dual

plate Check valve (PN 1.6) conforming to

IS:5312 complete with rubber gasket, GI

bolts, nuts, washers etc. as required. (A)

168 Supply, installation, testing and 3.000 No 1696.80

commissioning 50 mm diameter of C.I.

Butterfly valve (IS:13095, PN 1.6) with

integrally moulded linear of nitrile or EPDM.

Stainless steel Disc & Steam Lever

operated with ISI Marked as required.

Description of Item (with brief

Rate in Total

Item No. specification and reference to book of Quantity Unit

Figures Amount

specifications)

169 Supply, Installation, Testing and 2.000 No 1742.25

Commissioning of Cast iron NRV- Dual

plate Check valve (PN 1.6) conforming to

IS:5312 complete with rubber gasket, GI

bolts, nuts, washers etc. as required. (A)

170 Providing and fixing 63mm Gun metal / SS 22.000 No 2945.16

single outlet type hydrant valve as per IS

5290 with ISI marked 75 mm inlet and

63mm female instantaneous coupling

rubber washer and cast iron hand wheel

operation with close and open direction as

171 Providing and fixing 63mm dia Gun metal 22.000 No 1278.66

/SS branch pipe of standard length with

20mm bore hexagonal nozzle as per IS

with ISI marked as directed.

172 Providing and fixing 63mm Pyroline fire 22.000 No 3634.99

hose of approved brand conforming to IS

636 type B having crushing pressure of

37.20 kg/cm 2 of ISI marked of 15 mtr

length fitting with necessary S.S 63mm

delivery hose coupling as IS 903 with ISI

mark bided with GI./Cu. wire etc.

complete directed.

173 Supply,Installation, Testing & 2.000 No 8835.48

Commissioning of Stainless steel Fire

Brigade connection (Suction collecting

head) consisting of 4/2 Way 63 mm dia

instantaneous type male coupling with built-

in check valves and 150/100 mm

dia.flanged outlet complete with bolts, nuts

and rubber insertions as required as per

IS:904-1983 with butter fly valve and Non

Return Valve

Description of Item (with brief

Rate in Total

Item No. specification and reference to book of Quantity Unit

Figures Amount

specifications)

174 Mild steel box hose cabinet of 16 SWG of 22.000 No 1503.89

suitable size with loachking arrangement

and 5 mm thick glass panel to

accommodate 1 no of hose pipe (15mtr) and

1 no, SS branch pipe etc painting red colors

etc as directed. ( all the fire accessories

should be inside hose box )

175 Providing & fixing of First Aid Hose Reel 22.000 No 5555.00

wall mounting type with 30 meter long

length PVC nylon braided flexible pipe of

mm dia. with shut off nozzle & Ball valve

both of superior quality made out of SS-304

investment casting of approved quality etc.

as per IS 884 complete as directed.

176 Supplying & erecting carbon dioxide (CO2) 22.000 No 5696.40

fire extinguisher user of following capacity

with necessary clamps made from 50x6 mm

M.S. Flat with nut & bolts grouted in wall

complete. [A] For 4.5 Kg Capacity

177 Supplying, Installing, Testing & 22.000 No 2383.60

commissioning of ABC type fire

extinguishers of 6 kg/Capacity with ISI mark

(IS 15683 ) etc as directed

Description of Item (with brief

Rate in Total

Item No. specification and reference to book of Quantity Unit

Figures Amount

specifications)

178 Structural steel work ( Confirming to IS 4923- 500.000 Kg 127.95

1997) riveted, bolted or welded in builtup for

all type sections, in framed work, including

cutting, hoisting, fixing in position and

applying a priming coat of approved steel

primer all complete as per the structural

designs and directions of Engineer in

charge. Supply, fabication and installation of

MS support as per required for support of

pipe and Other Accessories.

179 Supply, installation, testing and 1.000 No 27775.00

commissioning of Pressure switch and

phase connection charge.

180 Wrapping & Coating of 4mm bituminius 150.000 Rmt 525.35

IWL/PYPOCOAT of Under ground pipe as

per nomes etc.complete as directed By

Engineer in charge.

181 Design, Supply & Installation of Safety 16000.000 Sq cm 2.04

Signages made of zinc sulphide based glow

in the dark rigid sheet with high luminous

property enclosed in a transparent weather

proof U/V stabilized plastic pasted on 2mm/

3 mm thick clear acrylic sheet/ACP sheet

such as EXIT, EMERGENCY EXIT, DO

NOT USE LIFT IN CASE OF FIRE, FLOOR

MARKINGS, FIRE LIFT, STAIRCASE EXIT,

FIRE HYDRANT POINT, FIRE

EXTINGUISHER, FIRE ALARM CALL

POINT etc.

182 Supply, installation, testing and 300.000 No 346.83

commissioning of Fire Sprinkler standard

ISI, 57 degree

Description of Item (with brief

Rate in Total

Item No. specification and reference to book of Quantity Unit

Figures Amount

specifications)

183 Supplying and fixing On/Off push buttons 22.000 No 969.10

with with pipe & 4c x 1 sq. mm cable wiring

on each floor etc.

184 Supplying and installing Fire Alarm System 1.000 No 46460.00

(Conventional Type Panel) mannual call

point, hutter, on-off switch complete

installation and fitting with labour etc

185 Providing & Fixing SS 304 ball valve of 25 22.000 No 969.10

mm dia. of approved brand as directed by

Engineer in charge.

186 Fire Proof cable for Fire pump to fire pannel 10.000 Rmt 252.50

10 Sqm x 6 C.

187 Supplying & Installation pressure gauge of 2.000 No 2188.11

150 mm dia. 0-21 Kg/cm2 fitted with

12/15 mm dia pad cock valve and G.I.

elbow etc. complete as required.

188 Supply and installation of Gun Metal Air 2.000 No 1363.50

Release Valve with all accessories etc.

complete as required.

189 Supply, installation, testing and 3.000 No 12625.00

commissioning of Foot valve with necessary

Fittings etc. complete.

Description of Item (with brief

Rate in Total

Item No. specification and reference to book of Quantity Unit

Figures Amount

specifications)

190 Making all liasoning work, Consultancy work 1.000 Job 50500.00

for getting provisional & Final CFO, NOC,

as filling necessary applications,

submission of forms for approval to the

municipal authorities, depositing and making

channels for the necessary fees and other

amounts as required for getting the

premises / installations inspected and

approved and all other formalities required

till the sewer / storm water connection is

obtained. All the expenses incurred in this

regard shall be borne by the Contractor,

except for the payments to be made for any

security deposits which will be reimbursed

on production of original voucher.

191 Basket Type Strainer.(Make: worth valve, 2.000 No 38077.00

Normex) upto 150mm dia Basket Type

Strainer.(Make: worth valve,

192 Supplying, Installation, Testing and 1.000 No 223210.00

Commissioning of Control Panel suitable fire

fighting pump. suitable for All

Pumps(Electrical +Jockey + Diesel Engine

Pump) for auto start and stop of main pump

with the provision of push buttons for

manual stop.

Description of Item (with brief

Rate in Total

Item No. specification and reference to book of Quantity Unit

Figures Amount

specifications)

193 Providing, fixing, testing & commissioning of 1.000 No 222200.00

Electrical Motor Driven Main Pump of

centrifugal horizontal end suction type with

gland packing and capacity of

2280LPM@80Mtr Head.The pump shall be

coupled to TEFC motor of suitable HP &

speed and complete set shall mounted on

common base frame . The quoted rate shall

includes providing & fixing of coupling,

coupling gaurd,matching flanges for suction

& delivery side, Foundation bolts and

foundation as recommended by

manufacturer etc. (Hydrant + Sprinkler

194 Providing, fixing, testing & commissioning of 1.000 No 161448.50

Electrical Motor Driven Jockey Pump

capacity of180LPM/Hour@80Mtr Head.The

pump shall be coupled to TEFC motor of

suitable HP & speed and complete set shall

mounted on common base frame . The

coupling, coupling gaurd,matching flanges

for suction & delivery side, Foundation bolts

Description of Item (with brief

Rate in Total

Item No. specification and reference to book of Quantity Unit

Figures Amount

specifications)

195 Supplying, Installation, Testing and 1.000 No 660439.00

commissioning of Diesel Engine driven fire

pump suitable for automatic operation and

consisting of following: Horizontal type,

centrifugal End Suction pump of cast iron

body & bronze impeller , mechanical seal to

ensure a minimum pressure of 3.5 kg /

sq.cm. at highest and farthest outlet at

specified flow of 1620 LPM@ 80M. head

conforming to IS 1520. The pump shall be

coupled to TEFC motor of suitable HP &

speed and complete set shall mounted on

common base frame with , coupling,

coupling guard, foundation bolts etc. as

196 Providing and fixing orifice plate on fire 22.000 No 1111.00

hydrant valve including jointing materials

having suitable base for reducing the

pressure hydrant outlet etc as directed.

197 Supplying installation, Testing & 66.000 No 757.50

Commissioning of 15 mm dia gun metal ISI

mark gate valve with 25 mm dia nipple.

198 Providing and fixing sprinkler system in 100.000 No 3030.00

Basement / Parking as per current Prevaling

Norms complete with necessary dia. pipe

line network with all sizes of pipe from

mm to 25 mm with 57 degree sprinkler and

Sluice valve/ Butterfly valve & drain valve

with supports of sprinkler hangers with

bullets & studs of 10 mm and 12 mm

including painting the pipe line with redoxide

and two coat red enamal paint of approved

Description of Item (with brief

Rate in Total

Item No. specification and reference to book of Quantity Unit

Figures Amount

specifications)

199 Providing and erecting XLPE(IS:7098)(I)- 88 150.000 Rmt 252.50

ISI armoured cable multistrand / Solid

Copper conductor for 1.1 KV. to be laid on

wall with necessary clamps or in existing

trench / pipe at road crossing or floor of

following size of cables. 4c x 1.5 sq mm

200 Supplying of Armored Aluminum cable PVC 150.000 Rmt 353.50

Insulated Approved mark 3C x 35 sq mm

201 Providing, fixing, testing and commissioning 6.000 No 3413.80

of Pressure Gauge 100 mm dial with cock &

accessories for pumps.The pressure gauge

shall be approved type. The Gauges with

cock shall be constructed of die cast

aluminium & stove enameled. The Gauge

shall be of stainless steel bourden type.s

202 Providing, fixing, testing and commissioning 2.000 No 4070.30

of Pressure switches of diaphram operated

SPDT type whether IP66 suitable range (12

kg/cm² to 1 kg/cm²) for pump sets with Ball

valves, Fittings like unions / collars /

reducers etc.

203 Providing, fixing, testing and commissioning 1.000 No 15099.50

Air vessel / PRIMING TANK fabricated from

suitable material with supporting legs,

outside painted with one coat of primer and

two coats of synthetic enamel paint of

approved shade,complete with one 25mm

dia connection from pump delivery, one

mm drain with valve.

Description of Item (with brief

Rate in Total

Item No. specification and reference to book of Quantity Unit

Figures Amount

specifications)

204 Application fees for fire saftey certificate 5278.000 Sqm 8.42

approval as per building plan for residential

building .

205 Supplying, Installing, Testing & 8.000 No 4040.00

commissioning of Modular type (Automatic)

fire extinguishers of 5 kg/Capacity with ISI

mark (IS 15683 ) etc as irected

206 Fire Proof armed cable for Fire system 1.5 100.000 Rmt 808.00

Sqm x 2 C.(Alaram)

207 Fire Proof armed cable for Fire system 1.5 100.000 Rmt 101.00

Sqm x 3 C.

208 Providing and laying in trenches galvanized 50.000 Rmt 1152.11

mild steel tubes (medium grade) of 100 mm

dia nominal bore tube fitting.

Total Civil Amount A =

Description of Item (with brief

Rate in Total

Item No. specification and reference to book of Quantity Unit

Figures Amount

specifications)

209 Point wiring for Light / Bell with 2-1.5 790.000 Pt. 611.91

sq.mm & earth wire of 1.5 sq.mm (Green)

both are of ISI marked 1.1 kV grade FRLSH

PVC insulated multi strand copper wires up

to 10 mtr length , in below type of pipe

erected with 6A Modular type switch / bell

push & accessories and earth continuity of

following type, erected on PVC /

Metallic/Wooden box, single mounting base

frame covered with textured/metallic/white

front plate modules erected on / in wall /

ceiling as per pipe erected, with necessary

Lamp holder/ceiling rose / H.D.Connector as

directed.(f) with medium class Rigid PVC

pipe and accessories erected concealed in

wall/ceiling complete Cat. III (5% Added for

FRLSH WIre/Cable)

210 Point wiring for Light / Bell with 2-1.5 208.000 Pt. 305.95

sq.mm & earth wire of 1.5 sq.mm (Green)

both are of ISI marked 1.1 kV grade FRLSH

PVC insulated multi strand copper wires up

to 10 mtr length , in below type of pipe

erected with 6A Modular type switch / bell

push & accessories and earth continuity of

following type, erected on PVC /

Metallic/Wooden box, single mounting base

frame covered with textured/metallic/white

front plate modules erected on / in wall /

ceiling as per pipe erected, with necessary

Lamp holder/ceiling rose / H.D.Connector as

directed.(f) with medium class Rigid PVC

pipe and accessories erected concealed in

wall/ceiling complete Cat. III(50% rate for

bath & W/C) (5% Added for FRLSH

WIre/Cable)

Description of Item (with brief

Rate in Total

Item No. specification and reference to book of Quantity Unit

Figures Amount

specifications)

211 Point wiring for FAN with 2-1.5 sq.mm & 266.000 Pt. 849.46

earth wire of 1.5 sq.mm (Green) both are of

.ISI marked 1.1 kV Grade FRLSH PVC

insulated multi strand copper wires up to

mtr length, in below type of pipe erected

with 6A Modular type switch and hum free

EME step type electronic fan regulator

mounted and accessories with earth

continuity of following type erected on PVC /

Metallic/Wooden box, single mounting base

frame covered with textured/metallic/white

front plate modules erected on / in wall /

ceiling as per pipe erected. with necessary

ceiling rose / H.D.Connector as directed.(f)

with medium class Rigid PVC pipe and

accessories erected concealed in

wall/ceiling complete Cat. III (5% Added for

FRLSH WIre/Cable)

212 Point wiring for Modular secondary light 66.000 Pt. 211.04

point with 2-1.5 sq.mm & earth wire of

sq.mm (green) both are of ISI marked

kV grade FRLSH PVC insulated multi strand

copper wires, in below type of pipe to be

erected complete with earth continuity and

necessary connection with primary light with

accessories erected on Metal / PVC /

wooden box covered with 3 mm thick

PC(Polycarbonate) / Acrylic sheet for open

/ concealed wiring. with necessary Lamp

holder / ceiling rose / H.D.Connector as

directed.(f) with medium class Rigid PVC

pipe and accessories erected concealed in

wall/ceiling complete (5% Added for FRLSH

WIre/Cable)

Description of Item (with brief

Rate in Total

Item No. specification and reference to book of Quantity Unit

Figures Amount

specifications)

213 Point wiring for on board Looped Plug with 104.000 Pt. 324.51

6A Modular type switch & 5 pin socket

erected on PVC / Metallic/Wooden box,

single mounting base frame covered with

textured / metallic/white front plate modules

erected on / in wall / ceiling with following

type accessories Cat. III (5% Added for

FRLSH WIre/Cable)

214 Point wiring for Two Way Controlled Light 1421.000 Pt. 761.44

Point with 2-1.5 sq.mm & earth wire of

sq.mm (green) both are of .ISI marked

kV grade FRLSH PVC insulated multi strand

copper wires erected in below type of pipe

with 6A Modular type switches and following

type of accessories erected on PVC /

Metallic/Wooden box, single mounting base

frame covered with textured / metallic/white

front plate modules erected on / in wall /

ceiling as per pipe erected. with necessary

batten/angle holder or ceiling rose or

H.D.Connector as directed.(f) with medium

class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete

Cat. III (5% Added for FRLSH WIre/Cable)

215 Providing following type of Modular Type 52.000 Ea. 160.59

Accessories mounted with PVC /

metallic/Wooden box, single mounting base

frame covered with textured / metallic/white

front plate , modules erected with

necessary connections as per site situation

directed by Engineer In charge. (3) Two

Pin/RJ-11 Telephone Socket, [A] For One

Gang Cat.III

Description of Item (with brief

Rate in Total

Item No. specification and reference to book of Quantity Unit

Figures Amount

specifications)

216 Providing following type of Modular Type 52.000 Ea. 160.59

Accessories mounted with PVC /

metallic/Wooden box, single mounting base

frame covered with textured / metallic/white

front plate , modules erected with

necessary connections as per site situation

directed by Engineer In charge. (3) Two

Pin/RJ-11 Telephone Socket, (4) TV Co-

axial Socket outlet , Cat.III

217 Providing following type of Modular Type 1264.000 Ea. 25.25

Accessories mounted with PVC /

metallic/Wooden box, single mounting base

frame covered with textured / metallic/white

front plate , modules erected with

necessary connections as per site situation

directed by Engineer In charge. (3) Two

Pin/RJ-11 Telephone Socket, (7) Blank

Plate Single Cat.III

218 Providing following type of Modular Type 269.000 Ea. 180.79

Accessories mounted with PVC /

metallic/Wooden box, single mounting base

frame covered with textured / metallic/white

front plate , modules erected with

necessary connections as per site situation

directed by Engineer In charge. (3) Two

Pin/RJ-11 Telephone Socket, (9) 16 Amp.

SP one way switch, Cat.III

Description of Item (with brief

Rate in Total

Item No. specification and reference to book of Quantity Unit

Figures Amount

specifications)

219 Providing following type of Modular Type 269.000 Ea. 199.98

Accessories mounted with PVC /

metallic/Wooden box, single mounting base

frame covered with textured / metallic/white

front plate , modules erected with

necessary connections as per site situation

directed by Engineer In charge. (3) Two

Pin/RJ-11 Telephone Socket, (10) 6/16Amp.

Universal socket , Cat.III

220 Providing following type of Modular Type 52.000 Ea. 329.26

Accessories mounted with PVC /

metallic/Wooden box, single mounting base

frame covered with textured / metallic/white

front plate , modules erected with

necessary connections as per site situation

directed by Engineer In charge. (3) Two

Pin/RJ-11 Telephone Socket, (19) Modular

Indicating Call Bell , CAT III

221 Providing and erecting ISI mark Medium 1300.000 Mtr. 24.24

class RIGID PVC PIPES of following size

complete to be erected on/in wall or ceiling

erected with necessary PVC fittings &

Junction boxes fixed with adhesive solution

& Clamps with following dia of pipes, in

approved manner as directed (a)20 mm

222 Providing & erecting PVC Corrugated 32.500 Mtr. 17.17

Flexible Conduit with required nos. of

coupling, PVC bushes, Check-nuts etc.

complete of following sizes.(1) 20 mm

Description of Item (with brief

Rate in Total

Item No. specification and reference to book of Quantity Unit

Figures Amount

specifications)

223 Supplying and laying UPVC cable trunking 60.000 Mtr 188.87

system comprising unplasticised polyvinyl,

chloride rigid material with ignition free and

flame proof confirming BS with necessary

end caps Internal and external bend, flat

bends, coupler, tee etc..All necessary

accessories and measuring of following

sizes (3) 50 mm x 50 mm trunking

224 Providing and erecting Mains with 1.1 KV 7661.000 Mtr. 109.23

grade FRLSH PVC insulated ISI marked

stranded Copper conductor wire in following

type of pipe to be erected concealed in

/flushed on wall/ceiling, with 1.5 sq. mm

copper conductor FRLSH PVC insulated

stranded wire of green colour for earth

continuity of following size , (A) with medium

class Rigid PVC pipe and accessories, (b)

wire 2.5 sq. mm (5% Added for FRLSH

WIre/Cable)

225 Providing and erecting Mains with 1.1 KV 4701.000 Mtr. 147.41

grade FRLSH PVC insulaed ISI marked

stranded Copper conductor wire in following

type of pipe to be erected in / on wall /

ceiling with 2.5 sq. mm copper conductor

FRLSH PVC insulated stranded wire of

green colour for earth continuity of following

size (A) with medium class Rigid PVC pipe

and accessories (a) 2 wire 4 sq. mm (5%

Added for FRLSH WIre/Cable)

Description of Item (with brief

Rate in Total

Item No. specification and reference to book of Quantity Unit

Figures Amount

specifications)

226 Providing and erecting Mains with 1.1 KV 75.000 Mtr. 194.07

grade FRLSH PVC insulaed ISI marked

stranded Copper conductor wire in following

type of pipe to be erected in / on wall /

ceiling with 2.5 sq. mm copper conductor

FRLSH PVC insulated stranded wire of

green colour for earth continuity of following

size (A) with medium class Rigid PVC pipe

and accessories (b) 2 wire 6 sq. mm (5%

Added for FRLSH WIre/Cable)

227 Providing and erecting Mains with 1.1 KV 1893.000 Mtr. 237.55

grade FRLSH PVC insulaed ISI marked

stranded Copper conductor wire in following

type of pipe to be erected in / on wall /

ceiling with 2.5 sq. mm copper conductor

FRLSH PVC insulated stranded wire of

green colour for earth continuity of following

size (A) with medium class Rigid PVC pipe

and accessories (g) 4 wire 4 sq. mm (5%

Added for FRLSH WIre/Cable)

228 providing and erecting Mains with ISI 24.000 Mtr. 47.47

marked, 1.5KV grade electrolyte multi

stranded, annealed copper conductor with

heat resistant PVC insulated conforms to IS

694, IEC - 227 erected in existing pipe of

following size (Specifically for control panel,

relays, power switchgears, motor starters &

control wiring) with required size of copper

lugs, nuts and bolts if required.(d) One wire

Description of Item (with brief

Rate in Total

Item No. specification and reference to book of Quantity Unit

Figures Amount

specifications)

229 providing and erecting Mains with ISI 16.000 Mtr. 115.14

marked, 1.5KV grade electrolyte multi

stranded, annealed copper conductor with

heat resistant PVC insulated conforms to IS

694, IEC - 227 erected in existing pipe of

following size (Specifically for control panel,

relays, power switchgears, motor starters &

control wiring) with required size of copper

lugs, nuts and bolts if required. (f) One wire

230 providing and erecting Mains with ISI 20.000 Mtr. 837.29

marked, 1.5KV grade electrolyte multi

stranded, annealed copper conductor with

heat resistant PVC insulated conforms to IS

694, IEC - 227 erected in existing pipe of

following size (Specifically for control panel,

relays, power switchgears, motor starters &

control wiring) with required size of copper

lugs, nuts and bolts if required. (k) One wire

231 Supplying and erecting Flexible PVC 402.667 Mtr. 58.58

insulated multi strand multi core 1.1 kv

grade ISI marked copper wires of following

size to be erected as directed.(e)

Sq.mm 3 core round PVC sheathed

Description of Item (with brief

Rate in Total

Item No. specification and reference to book of Quantity Unit

Figures Amount

specifications)

232 Supplying & erecting approved make 1300.000 Mtr. 21.21

Telephone Cable electrolytic copper

conductor PE insulation twisted in two pairs,

& wrapped with FRLSH PVC tape &

sheathed with FRLSH PVC or HFFR outer

Jacket suitable for telephone wiring &

confirming to C-DOT erected in existing

pipe. of following size of conductors & nos.of

pairs. With necessary connections.[A]

Conductor Size 0.5 mm (a) Unarmoured (2)

Two Pairs (5% Added for FRLSH

WIre/Cable)

233 Supplying and erecting LED indoor fittings 52.000 Ea. 165.64

with LEDs of wattage 0.2 Watt to 0.5 Watt

assembled on single MCPCB, with housing

used as a heat sink shall be made of thick

sheet Steel conforming to IS: 513/CRCA/

aluminium die cast powder coated and high

U.V. & corrosion resistance with diffuser

with company mark/name 160V to 270V,

Power Factor more than 0.95, THD <

15%,CCT 3000 K to 6500K, Luminaire

efficacy> 85 lumens/watt ,LED LED driver

efficiency > 85 %( fitting required LM-79 &

LM-80 Certificates) (NOTE: Below

description have shown ranges of Wattage

capacity of LED fittings.The Engineer

between the ranges shown.)(A) Tube Light

with integral driver(i) 5-10 Watts, Surge-2

kV, IP-20, conventional 1 to 2 feet Cat-lll

Description of Item (with brief

Rate in Total

Item No. specification and reference to book of Quantity Unit

Figures Amount

specifications)

234 Supplying and erecting LED indoor fittings 416.000 Ea. 373.70

with LEDs of wattage 0.2 Watt to 0.5 Watt

assembled on single MCPCB, with housing

used as a heat sink shall be made of thick

sheet Steel conforming to IS: 513/CRCA/

aluminium die cast powder coated and high

U.V. & corrosion resistance with diffuser

with company mark/name 160V to 270V,

Power Factor more than 0.95, THD <

15%,CCT 3000 K to 6500K, Luminaire

efficacy> 85 lumens/watt ,LED LED driver

efficiency > 85 %( fitting required LM-79 &

LM-80 Certificates) (NOTE: Below

description have shown ranges of Wattage

capacity of LED fittings.The Engineer

between the ranges shown.)(A) Tube Light

with integral driver (iv) 22-24 Watts, Surge -

2KV,IP-20, conventional 4 feet Cat. III

Description of Item (with brief

Rate in Total

Item No. specification and reference to book of Quantity Unit

Figures Amount

specifications)

235 Supplying and erecting LED indoor fittings 70.000 Ea. 755.48

with LEDs of wattage 0.2 Watt to 0.5 Watt

assembled on single MCPCB , with housing

used as a heat sink shall be made of thick

sheet Steel conforming to IS: 513/CRCA/

aluminium die cast powder coated and high

U.V. & corrosion resistance with diffuser

with company mark/name LED batten with

Microwave motion technology in which

occupancy within 5m radius & 120° angle to

the sensor, the luminaire works at 100% of

defined output specification and if no

occupancy detected within specified range,

the luminaire stays at occupancy mode for

the first 180 to 300 seconds and then

luminaire will be turn OFF and providing an

energy-efficient solution which has

specifications: 160V to 270V, Power Factor

>/= 0.90, THD </=15%, CCT 3000 to

K, CRI >/=80, Luminaire efficacy>

lumens/watt , and Average life L70B50:

50000 hours

(A) Tube Light with integral driver (iv)

Watts, Surge - 2KV,IP-20, conventional

1150 to 1200mm, Cat-lll

236 Supplying and erecting led lamps with 312.000 Ea. 112.11

following wattage capacity of 220 to

voltage, minimum 15000 burning hours life,

500 V in built-surge

protection,Polycarbonate diffuser, mounting

suitable for E14 / E27 / B22 lamp holders, pf

>= 0.5(A) LED Lamps integral type, with PC

diffuser suitable LAMP holder (ii) 5 to

watts Cat. III

Description of Item (with brief

Rate in Total

Item No. specification and reference to book of Quantity Unit

Figures Amount

specifications)

237 Supplying and erecting LED indoor fittings 104.000 Ea. 427.23

with LEDs of wattage 0.2 Watt to 0.5 Watt

assembled on single MCPCB, with housing

used as a heat sink shall be made of thick

sheet Steel conforming to IS:

513/CRCA/aluminium pressure die cast

powder coated and high U.V. & corrosion

resistance with diffuser housed in

aluminium casted body with company

mark/name 160V to 270V,Power Factor

more than 0.95, THD < 15 %, CCT 3000 K

to 6500K, Luminaire efficacy>

lumens/watt , LED driver efficiency > 85 % (

fitting required LM-79 & LM-80

Certificates)(NOTE: Below description have

shown ranges of Wattage capacity of LED

any wattage capacity between the ranges

shown.)(A) Square/ Circular shaped

Surface/Recessed Mount Downlight with

provision for spring loaded mounting clips

complete.IP20 (ii) 11-15 watts, Surge-2 KV

Description of Item (with brief

Rate in Total

Item No. specification and reference to book of Quantity Unit

Figures Amount

specifications)

238 Supplying and erecting Dimmable LED 54.000 Ea. 766.59

indoor fittings with LEDs of wattage 0.2 Watt

to 0.5 Watt assembled on single MCPCB,

with housing made from polycarbonate with

polycarbonate diffuser with company

mark/name 160V to 270V,Power Factor

more than 0.95, THD < 20 %, CCT 3000 K

to 6000K,Luminaire efficacy>

lumens/watt, LED driver efficiency >

%,Beam angle options >120 ( fitting

required LM-79 & LM-80 Certificates)

Motion Sensor with 3 years warranty agaist

manufacturing defect :- having Sensing time

after 15-30Sec, detection area 4-6 mtr, Max

Mounting Height up to 3 meter and

Detaction area 4-6 meter.(NOTE: Below

description have shown ranges of Wattage

capacity of LED fittings.The Engineer

between the

ranges shown.) (A) Square/ Circular shaped

Surface/Recessed Mount Downlight with

provision for spring loaded mounting clips

complete.IP20, 15W & 4W dimming mode