Fabrication work of various line materials for erection HT /LT & TC center under Waghai division

Sr.No. Item Code DETAILS OF WORKS UNIT Rate Qty Amt.

Fabrication of Anchor Rod from

SQ.mm MS Round bar &65 mm x

9910000050 6 mm M.S. angle as per approved

drawing and requirement of the

Fabrication of Eye Bolt from

SQ.mm MS Round bar with

2 9910000015 supplying of 2 (two) nuts of suitable No.

size as per approved drawing and

requirement of the company.

Fabrication of Turn Buckle from

SQ.mm MS Round bar &65 mm x

9910000016 6 mm M.S. angle as per approved

drawing and requirement of the

Fabrication of 11' (feet) long

Top/Bottom/D.O. angle from

4 9910000030 mm x 65 mm x 6 mm M.S. angle as No.

per approved drawing and

requirement of the company.

Fabrication of 9' (feet) long

Top/Bottom/D.O. angle from

5 9910000031 mm x 65 mm x 6 mm M.S. angle as No.

per approved drawing and

requirement of the company.

Fabrication of 4'6" (feet) long

Tapping / bracing angle from

mm x 6 mm M.S. angle as per

approved drawing and requirement

of the company.

Fabrication of 2'3" (feet) long

bracing/ support angle from 65 mm

6 mm M.S. angle as per approved

drawing and requirement of the

Fabrication of llKV HT 'V' Cross

Arm from 65 mm x 65 mm x 6 mm

8 9910000021 M.S. angle as per approved No.

drawing and requirement of the

Fabrication of 11KV HT Top fitting

from 65 mm x 65 mm x 6 mm M.S.

9 9910000022 angle and 50mm x 6 mm M.S. flat as No.

per approved drawing and

requirement of the company.

Fabrication of 22KV HT Top fitting

from 65 mm x 65 mm x 6 mm M.S.

10 9910000055 angle and 50mm x 6 mm M.S. flat No.

as per approved drawing and

requirement of the company.

Fabrication of 22KV HT 'V' Cross

Arm from 65 mm x 65 mm x 6 mm

M.S. angle as per approved drawing

and requirement of the company.

Fabrication of Guy Clamp pair

suitable for PSC pole from 50mm x

12 9910000041 mm M.S. flat as per approved PAIR

drawing and requirement of the

Fabrication of 'U' Clamp from

50mm x 6 mm M.S. flat as per

approved drawing and requirement

of the company.

Fabrication of 'C clamp suitable for

all type of PSC pole from 50mm X

14 9910000043 6 mm M.S. flat as per approved No.

drawing and requirement of the

Fabrication of 'C clamp suitable for

RSJ GIRDER pole from 50mm X

15 9910000044 mm M.S. flat as per approved No.

drawing and requirement of the

Fabrication of Three hole Patti from

50mm x 6 mm M.S. flat as per

approved drawing and requirement

of the company.

Fabrication of 11' (feet) long

Top/Bottom channel from 100 mm

17 9910000061 x 50 mm x 5 mm M.S. channel as No.

per approved drawing and

requirement of the company.

Fabrication of 9' (feet) long

Top/Bottom channel from 100 mm x

18 9910000060 50 mm x 5 mm M.S. channel as per No.

approved drawing and requirement

of the company.

Fabrication of 11'{feet) long angle

bracing from 50 mm x 50 mm x

19 9910000035 mm M.S. angle as per approved No.

drawing and requirement of the

Fabrication of 9'(feet) long angle

bracing from 50 mm x 50 mm x

20 9910000034 mm M.S. angle as per approved No.

drawing and requirement of the

Fabrication of 11' (feet) long

channel welded from assorted

21 9910000062 length of scrap channel as per No.

approved and requirement of the

Fabrication of 9' (feet) long channel

welded from assorted length of

scrap channel as per approved and

requirement of the company

Fabrication of Guy Clamp pair

suitable for 10 mtr PSC pole from

23 9910000072 50mm x 6 mm M.S. flat as per pair

approved drawing and requirement

of the company.

Fabrication of Guy Clamp pair

suitable for 9/11mtr RSJ GIRDER

24 9910000073 pole from 50mm x 6 mm M.S. flat pair

as per approved drawing and

requirement of the company.

Fabrication of 5' (feet) long

Tapping angle from 65 mm x

25 9910000066 mm x 6 mm M.S. angle as per No.

approved drawing and requirement

of the company.

Fabrication of H.T. Ext'n suitable

for 22KV system from 65 x 65 x

26 9910000067 mm M.S. angle as per approved No.

drawing and requirement of the

Fabrication of H.T. Ext'n suitable

for 11KV system from 65 x 65 x

27 9910000068 mm M.S. angle as per approved No.

drawing and requirement of the

Fabrication of 750 mm long

Channel for HT AB conductor from

Channel as per approved drawing

and requirement of the company.

Fabrication of 22KV HT "V" Cross

Ann from 100mm x 50mm x 5mm

29 9910000070 M.S.Channel as per approved No.

drawing and requirement of the

Total Estimate 5,00,000/-

Total Rs: Five Lakh only.

Note: - Rate Are Exclusive of GST.

1. All fabricated items shall be fabricated by using wielding rods confirming to the

relevant ISI specifications and as directed by Engineer In-charge.

2. All fabricated items shall be painted with good quality (ISI Marked) of red oxide

paint. 3. Necessary electricity connections hall be provided by DGVCL on payment of

required charges for connection & electricity bill of the same shall be paid by the

4. The rates are inclusive of PF & Works Contract Tax (WCT) and exclusive of GST.

Executive Engineer (O&M)

DGVCL, Waghai Division