Loading…
Loading…
Tender Value
₹90.5 L
EMD Value
₹1.8 L
Closing Date
19 Sept 2026, 4:00 pmClosed
Karnataka Power Corporation Limited
SHESHU M
Overhauling of Coal and Oil Firing equipments and associated works of Units 5 to 8 Boilers (3X210MW & 1X250MW) of RTPS (OH-4) for the year 2026-27
KPCL/2026-27/PS/WORK_INDENT4674/CALL-2
KPCL/2026-27/PS/WORK_INDENT4674/CALL-2
Open
Power stations
Two Tender Document System(Two Cover)
KPCL Executive Engineer BM1 Office RTPS Raichur
7 documents required · 5 mandatory · 2 optional
Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs)
Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender)
Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction)
Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)
Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period)
Total value of civl engineering works executed and payments received in the last five years (year-wise)
List of existing commitments and ongoing works
List of works for which tenders already submitted
Banker Details for reference
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
List of Financial Resources with Certificates
The intending bidder should have satisfactorily completed, as a prime contractor, at least one similar work such as Overhauling of Coal and Oil Firing equipments at Boilers for a period of one year of value not less than Rs. 45.5 Lakhs in the last five financial years (i.e 2021-22, 2022-23, 2023-24, 2024-25 & 2025-26) in any Thermal Power Stations of 210 MW and above capacity Units. As a proof of this, the bidder should upload a Single / Multiple work orders (Limited to maximum 3 work orders for a total amount not less than Rs. 45.5 Lakhs) or corresponding Work Done Certificate issued by competent authority. Work Order / Work done of previous years shall be given weight at of 10% per financial year to bring them to the present price level of the financial year 2026-27.
The intending bidder, in his name should have achieved a average annual financial turnover of Rs. 91 Lakhs in at least two financial years during the last five financial years. (i.e., 2021-22, 2022-23, 2023-24, 2024-25 & 2025-26). As a proof of this, the bidder shall upload the certified copy of Profit & Loss Account or Turn over Certificate duly certified by the Chartered Accountant. Financial turnover of previous years shall be given weight at 10% per financial year to bring them to the present price level of the financial year 2026-27).
₹2,270
₹1.8 L
12 Sept 2026
12 Sept 2026
21 Sept 2026
18 Sept 2026
Overhauling of Coal and Oil Firing equipments and associated works of Units 5 to 8 Boilers (3X210MW & 1X250MW) of RTPS (OH-4) for the year 2026-27
Servicing / rectification of oil gun removable part assemblies.( Per assy ) ---- BIDDDERS ARE REQUESTED TO GO THROUGH THE UPLOADED TENDER DOCUMENT.
Servicing of air cooled oil gun assembly / oil gun guide pipe assemblies. ( Per assy ) ---- BIDDDERS ARE REQUESTED TO GO THROUGH THE UPLOADED TENDER DOCUMENT.
Dismantling of worn out coal compartment assemblies, transporting and keeping them in designated place (Per assy) ---- BIDDDERS ARE REQUESTED TO GO THROUGH THE UPLOADED TENDER DOCUMENT.
Transporting and erection of reconditioned /new coal compartment assemblies to the respective elevations (Per assy ) ---- BIDDDERS ARE REQUESTED TO GO THROUGH THE UPLOADED TENDER DOCUMENT.
Servicing of auxiliary air nozzles and oil nozzle tips. (Per nozzle tip ) ---- BIDDDERS ARE REQUESTED TO GO THROUGH THE UPLOADED TENDER DOCUMENT.
Repair / replacement of the damaged auxiliary air nozzles and oil nozzles tips ( Per nozzle tip) ---- BIDDDERS ARE REQUESTED TO GO THROUGH THE UPLOADED TENDER DOCUMENT.
Providing of 10mm SS rod over the burner panel frame on both sides ( Per RMT ) ---- BIDDDERS ARE REQUESTED TO GO THROUGH THE UPLOADED TENDER DOCUMENT.
Servicing of burner tilt mechanisms and correcting for synchronous operation in all 4 corners. ( Per corner ) ---- BIDDDERS ARE REQUESTED TO GO THROUGH THE UPLOADED TENDER DOCUMENT.
Servicing of auxiliary air / fuel air dampers(Per No) ---- BIDDDERS ARE REQUESTED TO GO THROUGH THE UPLOADED TENDER DOCUMENT.
Repair/ replacement / servicing of HEA ignitor guide tube assemblies ( Per assy ) ---- BIDDDERS ARE REQUESTED TO GO THROUGH THE UPLOADED TENDER DOCUMENT.
Servicing of flame scanner guide tube assemblies.(Per assy ) ---- BIDDDERS ARE REQUESTED TO GO THROUGH THE UPLOADED TENDER DOCUMENT.
Rectification of partition plates and corner plates of wind box at burner corners.(Per RMT) ---- BIDDDERS ARE REQUESTED TO GO THROUGH THE UPLOADED TENDER DOCUMENT.
Replacing the gasket of heat exchanger of HFO heating station ( Per No. ) ---- BIDDDERS ARE REQUESTED TO GO THROUGH THE UPLOADED TENDER DOCUMENT.
Inspection / servicing of HFO discharge filter. (Per No.) ---- BIDDDERS ARE REQUESTED TO GO THROUGH THE UPLOADED TENDER DOCUMENT.
Reconditioning of eroded coal nozzle tips( Per No) ---- BIDDDERS ARE REQUESTED TO GO THROUGH THE UPLOADED TENDER DOCUMENT.
Reconditioning of eroded coal nozzle castings with divider plates.( Per No ) ---- BIDDDERS ARE REQUESTED TO GO THROUGH THE UPLOADED TENDER DOCUMENT.
Erection of new approach platform (whereever necessary) (per Sq Mtr) ---- BIDDDERS ARE REQUESTED TO GO THROUGH THE UPLOADED TENDER DOCUMENT.
Hard facing of new Coal Nozzles/Tip ---- BIDDDERS ARE REQUESTED TO GO THROUGH THE UPLOADED TENDER DOCUMENT.
Assembling of new coal compartment assemblies of Unit 8 (Per assy ) ---- BIDDDERS ARE REQUESTED TO GO THROUGH THE UPLOADED TENDER DOCUMENT.
Supply & usage of consumbles as per the list detailed in Annexure-I ---- BIDDDERS ARE REQUESTED TO GO THROUGH THE UPLOADED TENDER DOCUMENT.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
OH-4 Bid Document Call-2 2026-27.pdf
Tender Document • 1.16 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .