Special repair to Bldg No. 13 at Mil Stn Dharamshala

Amount

Demolitin of brickwork/stone masonary built in cement mortar including all quions ,arches,pillars etc but excluding ashlar facings dressed stonework and pre cast concrete articles, complete all as specified and directed by Engr-in-Charge.

Brick work with subclass 'B'bricks,straight or curved on plan exc 6m mean radius built in CM 1:6, complete all as specified and directed by Engr-in-Charge.

ditto as per item No. 2.00 but except bricks, complete all as specified and directed by Engr-in-Charge.

M&L for Walling of squared rubble, regular coursed, well bonded, bedded and solidly hearted, built in, complete all as specified and directed by Engr-in-Charge.

Ditto as per item No 4.00 but except stones, complete all as specified and directed by Engr-in-Charge.

Raised pointing to squared rubble walling brought upto coursed in cement mortar 1:4, complete all as specified and directed by Engr-in-Charge.

Taking down cement plaster on brick walls or stone walls any descrition etc including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed by Engr-in-Charge.

Rendering 10mm thick cement plaster on other than fair faces of brick work or concrete surfaces in cement mortar (1:6) finished even and fair without using extra cement, complete all as specified and directed by Engr-in-Charge.

M&L for 15mm thick cement plaster in CM 1:4 on bricks surfaces finishing the surfaces even and smooth without using extra cement, complete all as specified and directed by Engr-in-Charge.

M&L for 15mm thick cement plaster in CM 1:4 on other than fair surfaces finishing the surfaces even and smooth without using extra cement, complete all as specified and directed by Engr-in-Charge.

Preparation of new plastered surface of wall by applying 1.5 mm wall care putty in two layer and making the surface smooth with sand paper and applying two coat of OBD, complete all as specified and directed by Engr-in-Charge.

Applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces, complete all as specified and directed by Engr-in-Charge.

Glazed ceramic tiles coloured, (first quality), of size 300x450mm x7mm thick on vertical surfaces such as skirting dados and risers to walls etc, joint free/joint less, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces over and including 10 mm thick rendering in CM 1:3 complete all as specified and directed by Engr-in-Charge.

M&L for Virified Ceramic tiles 10 mm thick light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM1:4 complete all as specified and directed by Engr-in-Charge.

Non skid Ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or Coloured cement to match over and including 15 mm thick cement screed bed in CM1:4 complete all as specified and directed by Engr-in-Charge.

Demolition of cement concrete (un-reinforced) in ground floor and paving n.exc 15 cm thick (below or above ground level), complete all as specified and directed by Engr-in-Charge.

Ditto as per item No 16.00 but reinforced cement concrete, complete all as specified and directed by Engr-in-Charge.

Providing 25 mm thick PCC 1:2:4, type B-0(using 20 mm stone agg.)in sub base of tiled flooring including finishing fair and even, complete all as specified and directed by Engr-in-Charge.

Cement concrete type C-1, 1:3:6 (using 20mm graded aggregate) as in plinth protection 75mm thick with joints, complete all as specified and directed by Engr-in-Charge.

Cement concrete type C-1, 1:3:6 (using 40mm graded aggregate) as in sub base 75mm thick with joints, complete all as specified and directed by Engr-in-Charge.

Cement concrete type C2 (1:3:6) using 20mm graded aggregate in surface channels and drains, complete all as specified and directed by Engr-in-Charge.

TMT bars 10mm dia and over cut to length,bent to shape required including cranking bending spirally for hooping for columns hucking ends and binding with and including mild steel wire (annealed) not les than 0.9mm dia or securing with clips quality conforming, complete all as specified and directed by Engr-in-Charge.

TMT bars 5 mm dia and over and upto 8mm dia as in stirrups cut to length,bent to shape required including cranking bending spirally for hooping for columns hucking ends and binding with and including mild steel wire (annealed) not les than 0.9mm dia or securing with clips quality conforming, complete all as specified and directed by Engr-in-Charge.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings & similar work; n.exc 200m thick (Horizontal or sloping) Rough finished surfaces of concrete flat, complete all as specified and directed by Engr-in-Charge.

RCC type B1 (1:2:4) using 20 mm graded aggregate in Slabs supported on walls, beams and columns in floors, roofs, landings, blaconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed by Engr-in-Charge.

Formwork to sides & soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors & beams, etc. Rough finished surfaces of concrete flat, complete all as specified and directed by Engr-in-Charge.

RCC type B1 (1:2:4) using 20mm graded aggregates in Beams,cantilevers, lintel over 1.5m span etc, complete all as specified and directed by Engr-in-Charge.

Dismantling plain or corrugated steel sheeting, any gauge thickness, incl nainital or similar pattern roof covering, complete all as specified and directed by Engr-in-Charge.

Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof overing/cladding to wall, fixed with self tapping screws, complete all as specified and directed by Engr-in-Charge.

Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed by Engr-in-Charge.

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/ slabs/blankets, any thickness, including cover fillets, complete all as specified and directed by Engr-in-Charge.

S & F 15 mm thick 2nd class hardwood Boarding planed one side with butt joints fixed with nails in any situation including cleaning and prepration of surface including a coat of wood filler on new works and applying french polishing with two or more coats, complete all as specified and directed by Engr-in-Charge.

Dismantling boarding, any description, fixed in any position with screws, complete all as specified and directed by Engr-in-Charge.

S & F 25 mm thick "Deodar wood" Boarding planed one side with butt joints fixed with screws in flooring, complete all as specified and directed by Engr-in-Charge.

Ditto as per item No 34.00 but except boarding, complete all as specified and directed by Engr-in-Charge.

French polishing on surfaces of any description,width or girth including cleaning and preparing the surface including a coat of wood filler on new/old works with two or more coats, complete all as specified and directed by Engr-in-Charge.

Suspended false ceiling system using E grid suspended ceiling grid system, Grid size 600mm x 600mm with and including G.I frame work of main runners 38mm x 24mm , cross Tee 28mm x 24mm and wall angle 24mm x 24mm hot diped galvanized steel with zinc coating not less than 120gm /sqm using 6mm thick high pressure stream cured fibre cement pre primered textured variant E board classic , ISI Marked IS- 14862-2000 to be placed in grid of E grid suspended ceiling grid system duly suspended by 6 mm dia GI bar hangers from existing purlins to roof with butterfly clips, complete all as specified and directed by Engr-in-Charge.

20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15 mm thick screed bed in CM 1:4 including demolition of existing stone slab, complete all as specified and directed by Engr-in-Charge.

20 mm thick Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 10 mm thick rendering in CM 1:3 incl dismantling of old finishes, complete all as specified and directed by Engr-in-Charge.

Taking down chowkhats or frames exceeding 1.5 Sqm and n.exc 4 Sqm(without taking off shutters from the frames), complete all as specified and directed by Engr-in-Charge.

Taking down chowkhats or frames not exc 1.5 Sqm (without taking off shutters from the frames), complete all as specified and directed by Engr-in-Charge.

Taking down Shutters of any description exc 1 sqm but not exc 2.0 sqm each, complete all as specified and directed by Engr-in-Charge.

S&F pressed steel frame made out of MS sheet 1.25mm thick of size 125x 60 mm for doors/ windows with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, complete all as specified and directed by Engr-in-Charge.

S&F pressed steel frame made out of MS sheet 1.25mm thick of size 105x60 mm for doors/windows with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, complete all as specified and directed by Engr-in-Charge.

PCC (1:3:6) type C-1 using 20mm graded crushed stone aggregate as in back filling of chowkhat, complete all as specified and directed by Engr-in-Charge.

Preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint, complete all as specified and directed by Engr-in-Charge.

35mm thick factory made plain framed panelled shutters of 2nd class hard wood two panel with lock rail and panel of 9mm thick BWP commercial ply. The size of rail and stile as per IS-1003 (Part-I) Kiln seasoned and chemically pressure treated factory made shutters wood is to be incorporated, complete all as specified and directed by Engr-in-Charge.

35mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkat, complete all as specified and directed by Engr-in-Charge.

Box type Steel windows comprised of tubular frame and shutters made out of 1.25mm thick MS steel tube factory made with double side shutters wire gauged shutter & glass glazed shutter with side hung shutters with steel handle and steel peg stay dovetailed or welded incl 2 Nos tower bolts 150mm long for each leaf and 8mm square bar grills at spacing welded to F I frame work , incl other fittings ,hinges ,handles tarred hold fasts PCC blocks etc, complete all as specified and directed by Engr-in-Charge. Note-: Wire and glass panes shall be measured and paid separately.

Galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks, or galvanized wire staples, complete all as specified and directed by Engr-in-Charge.

Preparation of wood or wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint, complete all as specified and directed by Engr-in-Charge.

Dismantling timber scantlings 40 sq cm & over in section, in any position in framed work, complete all as specified and directed by Engr-in-Charge.

M & L for second classs hardwood tilmber framed and fixed clean sawn as in scantling, complete all as specified and directed by Engr-in-Charge.

Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates conforming to Fe 410 -W (Gde-E- 250) quality- A, complete all as specified and directed by Engr-in-Charge.

S&F in repair PVC (SWR) pipes 75 mm dia single socketed, in any length with rubber ring joints,fixed on walls with stack clamps made out of 10 mm by 3 mm flat iron and 06mm dia round iron stays, including bolts and nuts and securing ends of stays to walls, complete all as specified and directed by Engr-in-Charge.

PVC (SWR) bends of 75 mm bore fixed, complete all as specified and directed by Engr-in-Charge.

S&F in repair PVC connection 15 mm dia with PTMT nuts of length 450 mm, complete all as specified and directed by Engr-in-Charge.

Sink with drainage board made of stainless steel 1.00 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed by Engr-in-Charge.

Brass CP mixer for mixing hot & cold water screwed down for iron pipe complete all as specified and directed by Engr-in-Charge.

S &F in repair Stainless steel Plate Rack 24"x24"x9" with all fittings, complete all as specified and directed by Engr-in-Charge. Make: JAINKO (Cat No KRJ-1, 7 Kg)

Angle valves cast copper alloy chromium plated screwed down high pressure ,with crutch or butterfly handle screwed both ends for iron pipe or for union of 15 mm bore complete all as specified and directed by Engr-in-Charge.

S & F in repair 15 mm bore tubes medium grade galvanised ISI marked with all fittings short pieces complete to walls,floor,ceiling etc, complete all as specified and directed by Engr-in-Charge.

S & F in repair 18/19 mm Prelaminated particle board, interior grade, prelaminated one side with decorative chice lamination & other side balancing white lamination ,fixed with screws to timber frame work incl 5 mm thick teak wood leaping surrounding edges, complete all as specified and directed by Engr-in-Charge.

S&F 75mm in size hasp and staple aluminium anodised, wire type stone enameled black including bolt to hinge plate and fixed with screws, complete all as specified and directed by Engr-in-Charge.

S & F 30mm width Continuous (piano) hinges, mild steel, bright finish or electro galvanished including necessary welding if required etc, complete all as specified and directed by Engr-in-Charge.

S & F steel body magnet catcher for kitchen cabinet of suitable size, complete all as specified and directed by Engr-in-Charge.

S&F 150 mm aluminium handles, cast type, anodised, complete all as specified and directed by Engr-in-Charge.

S&F 100 mm aluminium handles, cast type, anodised, complete all as specified and directed by Engr-in-Charge.

S & F 250 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete.

S& F 150 mm Aluminium anodised, barrel tower bolts of extruded section and fixed, complete all as specified and directed by Engr-in-Charge.

S & F 3 mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane, complete all as specified and directed by Engr-in-Charge.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads, complete all as specified and directed by Engr-in-Charge.

S & F 1.25 mm thick mild steel sheet eaves gutters, galvanised class 3, half round with rounded edgesas complete all as specified and directed by Engr-in-Charge.

Taking down carefully copper/aluminum point wiring (light, fan, socket or power) complete with fittings and fixtures such as switches, ceiling roses, pendants, regulators, socket, lamp holders brackets, bulk head fittings, tube light fittings etc removing material to store for keeping in safe custody or for taking credit ( credit for above items should be made as per conditions separately ) and also making good disturbed surfaces of wall, floors etc, complete all as specified and as directed by the Engineer-in-Charge.

M&L for point wiring with 1.5 Sqmm copper conductor (Multi-stranded) PVC insulated and unsheating FRLS electric cable 1100 volts cable and including PVC casing and caping of suitable size (as per conductor run) with all fittings/ accessories and including PVC insulated electric cable 1100 volts 1.5 Sqmm ( multi-stranded) copper conductor single core( Green colour) cable as continuous earth wire connected to common earth dolly including sunk sheet steel terminal box made out of 1.6 mm thick MS sheet suitable for moular cover plate as per site requirement, concealed in wall or on surface as per site requIrement and making good disturbed surfaces of wall for one light point/bell point/fan point/exhaust fan point etc controlled by one, one way switch, complete all as specified and as directed by the Engineer-in-Charge.

All as per item No75.00 above, but for one 3 pin socket outlet 5 Amp on independent board, complete all as specified and as directed by the Engineer-in-Charge.

All as per serial item No 75.00 here-in-before , but for one socket outlet 15 Amps on independent board with 2.5 Sqmm copper conductor ( Multi-stranded) PVC insulated and unsheating electric cable 1100 volts (ISI Marked) including PVC insulated and unsheathed electric cable 1100 volts 2.5 Sqmm copper stranded conductor as continuous earth wire connected to common earth dolly, complete all as specified and as directed by Engineer-in-Charge.

M&L for modular Socket, 6A - 2/3 pin combined 2 module, complete all as specified and as directed by Engineer-in-Charge.

M&L for modular Socket 6A/16A - 2/3 pin combined 2 module, complete all as specified and as directed by Engineer-in-Charge.

M&L for Modular switch 1 way 16A, 1 module, complete all as specified and as directed by Engineer-in-Charge.

M&L for Modular switch 1 way 6A, 1 module, complete all as specified and as directed by Engineer-in-Charge.

M&L for Modular white cover plate with frame, 3 module, complete all as specified and as directed by Engineer-in-Charge.

M&L for Modular white cover plate with frame, 6 module, complete all as specified and as directed by Engineer-in-Charge.

M&L for ceiling rose surface type, 65 mm x 50 mm two to three terminals / PVC / polycarbonate, isolated body fixed on PVC block, complete all as specified and directed by Engineer-in-Charge.

Supply & Fix in replacement of existing unsrviceable Sheet metal enclosure for DB’s suitable for MCBs of single pole and neutral 08 way (Double door) with 200 amp 240 Volts rated bus bar, complete all as specified and as directed by Engineer-in-Charge. Note: i) Connections of MCB's shall be done with appropriate size of brass/Copper thimble. ii) The disturbed surface shall be match with existing surface.

Supply and fix 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and neutral, current carrying capacity 40 Amp, complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 Amp complete all as specified and as directed by Engineer-in-Charge.

Supply and fix LED lights fitting 1x 18W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and as directed by Engineer-in-Charge.

Earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6.3mm thick buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 Metres below normal ground level, connecting to the Galvanised iron earth lead wire 4mm dia, by means of bolts, nuts, check nuts and washers of galvanised iron and 4mm earth lead protected by provision of GI medium grade pipe 15mm bore including provision of concrete pit in PCC (1:2:4) type B-1 using 20mm graded stone aggregates with 40mm thick cover of RCC (1:2:4) reinforced with XPM (weight not less than 4Kg/Sqm) and frame of angle iron 25x25x6mm with lugs 02 Nos and with 6mm dia MS bar handle made to shape, GI medium grade 20mm bore pipe for watering perforated at bottom 1.75 metre long placed on top edge of earth plate, common salt and charcoal filling, test point made out of 75x50x6mm phosphorous bronze with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returning filling in and removal of surplus soil to a distance not exceeding 50 metres, all as per electrical plate No 3 of SSR-2009 Part-I and connecting to earth test point including testing on completion all as specified and directed by the Engineer-in-charge.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 450 mm sweep heavy duty with, blades, and frame and louvers, complete all as specified and as directed by Engineer-in-Charge.

Sub main wiring single core PVC insulated and unsheathed cable two run 6 Sqmm multi -strand copper conductor drawing in PVC casing caping with 1 x 4.0 Sqmm earth wire as in earth and neutral, complete all as specified and as directed by Engineer-in-Charge.

M/S JATINDERA ENTERPRISES

Eshaan Construction Co.

Ms Sunil Kumar