CA NO GE(N)AMB-71/2023-24 REPAIR /REPLACEMENT OF INTERNAL WIRING INCLUDING CONNECTED ITEMS IN SECTOR A OF AGE E/M UNDER GE (N) AMBALA CANTT

Amount

Taking down carefully copper/aluminum point wiring (light, fan, socket or power) complete including all fittings and fixtures such as switches, pendant, lamp holder, regulators, socket outlet, etc and removing unserviceable materials from site of work and making good disturbed surfaces of walls, floors with cement mortar and white/colour wash to match with existing surfaces etc complete all as specified and as directed by the Engineer-in-Charge.

Material and labour for point wiring with 1.50 Sqmm single core PVC insulated , unsheathed cable FRLS-H, 1100 volt grade ISI marked with multi stranded copper conductor drawn through and incuding medium grade, ISI marked, PVC conduit not less than 20 mm dia with accessories, concealed on wall/ceiling surfaces and incuding provision of 1.50 Sqmm single core PVC insulated , unsheathed cable FRLS-H, 1100 volt grade ISI marked with multi stranded copper conductor green colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including mild steel sunken box or pressed steel terminal boxes modular type of size/modules as required at site with earth dolly (boxes shall be galvanised or painted with two coats of anti corrosive paint over a coat of red oxide primer both internally and externally) including provision of new covered plate over sunken box for housing the modular switches , modular socket outlets,modular fan regulators etc. for one light/fan/exhaust fan/bell point controlled by one way switch, complete all as specified and as directed by Engineer-in-Charge. Note :- a) .All chases will be cut by chase cutter only b) Switch, socket outlet and fan regulators to be measured and paid for separately .

Description Same all as per item No.02 but for One 3 pin, 6 Amps, socket outlet controlled by one switch on independent board, complete all as specified and as directed by Engineer-in-Charge.

Description Same all as per item No. 02 but for One 3 pin 6 Amps socket outlet controlled by one switch on Same board, complete all as specified and as directed by Engineer-in-Charge.

Description Same all as per srl item No 02 here-in-before but for one socket outlet 16 Amp with 2.50 sq mm PVC insulated, unsheathed cable FRLS-H, 1100 volt grade ISI marked with multi stranded copper conductor along with 2.50 sqmm PVC insulated , unsheathed cable green colour FRLS-H, 1100 volt grade ISI marked with multi stranded copper wire as earth continuity conductor connected to common earth dolly complete all as specified and as directed by the Engineer-in-Charge.

Description Same all as per srl item No 02 here-in-before but for one socket outlet 16 Amp with 4.00 sq mm PVC insulated, unsheathed cable FRLS-H, 1100 volt grade ISI marked with multi stranded copper conductor along with 4.00 sqmm PVC insulated , unsheathed cable green colour FRLS-H, 1100 volt grade ISI marked with multi stranded copper wire as earth continuity conductor connected to common earth dolly complete all as specified and as directed by the Engineer-in-Charge.

Supply and fix modular switch 1 module, single pole, one way 6 Amps flush type, 230 volts complete all as specified and as directed by Engineer-in-Charge.

Supply and fix modular switch 1 module, single pole, one way 16 Amps flush type, 230 volts complete all as specified and as directed by Engineer-in-Charge.

Supply & fix modular socket outlet 2/3 pin combined, 6 Amp, one way, two module, 230 volts complete all as specified and as directed by Engineer-in-Charge.

Supply & fix modular socket outlet 3/3 pin combined, (6pin), 6/16 Amp, one way, two module, 230 volts complete all as specified and as directed by Engineer-in-Charge.

S&F electronic Fan regulator modular 100 watt, 1 module, 230 volts , 50 Hz, AC supply suitable for ceiling fan any type/make/sweep complete all as specified and as directed by the Engineer-in-Charge.

S&F modular bell push 6 Amp, 1 way, 1 module, 230 volts complete all as specified and as directed by the Engineer-in-Charge.

Supply & fix calling bell ding dong 230 volt including removing unserviceable bell, complete all as specified and as directed by the Engr-in-charge.

Supply and fix ceiling rose surface type 2/3 terminal polycarbonate, isolated body complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing lamp holder, PVC/polycarbonate type with back plate suitable for batten fittings, complete all as specified and as directed by Engineer-in-Charge.

S&F LED lamp 9 watt threaded/pin end, warm/cool lamp type as per site requirement suitable for fixing on existing batten/angular holders complete including taking down unserviceable bulbs complete all as specified and as directed by the Engineer-in-Charge.

S&F LED lamp 12 watt threaded/pin end, warm/cool lamp type as per site requirement suitable for fixing on existing batten/angular holders complete including taking down unserviceable bulbs complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing indoor decorative LED tube light fitting box type 18/20 watt with electronic driver, opal diffuser, high efficient aluminium housing body suitable for LED tube, high efficient, AC 220-240 volts, 50 Hz including 18/20 Watt LED tube rod luminaries environment friendly, high efficient, T8 with aluminium extrusion heat sink and connecting with copper conductor flexible cable from ceiling rose to connector of the light including disconnecting and taking down existing light fitting and removal complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing LED batten fitting 10-12 watt, 2 feet, aluminium housing with electronic driver including tube rod 10/12 watt cool/warm type industrial model complete, connecting with copper conductor flexible cable from ceiling rose to connector of the light as in repair complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing LED surface mounted bulk head luminaries 8-10 watt with min 800 lumen, industrial model, IP 65, PVC housing, surge protection including driver & LED lamp etc complete with all accessories, connecting with copper conductor flexible cable from ceiling rose to connector of the light as in repair complete all as specified and as directed by the Engineer-in-Charge.

S&F 9/12 watt LED light fitting wall mounting fixture (sketch type) including LED lamp compact and energy efficient epoxy powder coated luminaire and connecting with copper conductor flexible cable from ceiling rose to connector of the light complete including removing unserviceable light fittings complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing recess mounting LED 15/18 watt cool/warm type circular down lighter/ COB panel with PVC housing, 240 volt, 50HZ, AC supply complete with all accessories internally pre wired including connecting with 3 core flexible copper conductor from ceiling rose to connector of the light, including disconnecting and taking down existing old unserviceable fitting complete all as specified and as directed by the Engr-in-charge.

Supply and fixing recess mounting LED 5/8 watt cool/warm type circular down lighter/ COB panel with PVC housing, 240 volt, 50HZ, AC supply complete with all accessories internally pre wired including connecting with 3 core flexible copper conductor from ceiling rose to connector of the light, including disconnecting and taking down existing old unserviceable fitting complete all as specified and as directed by the Engr-in-charge.

S&F LED Bldg Security Light Fittings of capacity 20 -25 watt made up of die cast aluminium housing with black epoxy powder coating with cover heat resistance glass safety input voltage range 170 to 270 volts, industrial model with IP-65 protection and other connected accessories including electronic driver, service bracket of mild steel pipe 32 mm bore medium grade of length 0.9 mtr with MS clamps, bolts, nuts, and washers and suitable reducer for connecting fitting to MS pipe as required at site and two coats of synthetic enamel paint over one coat of red oxide primer on mild steel work and making electrical connection, including disconnecting and taking down existing old U/S fitting complete all as specified and as directed by the Engineer-in-Charge.

S&F LED Bldg Security Light Fittings of capacity 45 watt made up of die cast aluminium housing with black epoxy powder coating with cover heat resistance glass safety input voltage range 170 to 270 volts, industrial model with IP-65 protection and other connected accessories including electronic driver, service bracket of mild steel pipe 32 mm bore medium grade of length 0.9 mtr with MS clamps, bolts, nuts, and washers and suitable reducer for connecting fitting to MS pipe as required at site and two coats of synthetic enamel paint over one coat of red oxide primer on mild steel work and making electrical connection, including disconnecting and taking down existing old U/S fitting complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing 36W , 2’X2’ recessed Luminaire with housing made up of CRCA powder coated made up of High transmittance diffuser for glare free symmetric light distribution., Powered by Isolated, SELV output Electronic Driver with Output Short-circuit protection, Surge Voltage protection and other safety & performance test as per IS:15885 Part 2/Sec 13. Power Consumption should not greater than 36W and System Efficacy not less than 100 Lumens/Watt, CCT 5700K PF>0.95, CRI>80 ,THD<10%. Operating temperature: -10 °C to +35 °C , Operating voltage range: 140 V - 270 V. Built in PIR Sensor. Luminaire Should conform to IP20 Classification. Test report to be submitted; photo biological safety norms: IS16108, test certificate to be submitted; certification: LM 79 for luminaire and LM80 for led source, Driver and Fixture to be BIS certified as in repair complete all as specified and as directed by the Engr-in-charge.

Supply and fixing LED flat panel 2' x 2' size fully difused surface/ recess mounted fitting (grid/ gypsum type) 36-40 watt , 5700K, warm/cool white with powder coating and CRCA front cover including frame with provision of PVC flexible copper conductor cable from ceiling rose to light fitting as in repair complete all as specified and as directed by the Engr-in-charge.

Supply & fixing LED Flood lights, 100 watt, IP-66, aluminum die cast housing with unique lens system and toughened glass with gasket 240 volt, 50Hz, AC supply complete with all accessories internally pre wired including connecting with flexible copper conductor to connector of the light with necessary fixing arrangements, including disconnecting and taking down existing old unserviceable fitting complete all as specified and as directed by the Engr-in-charge.

S & F LED Bollard 8-10 watt, IP-65 , 6500 K luminaire made of pressure die cast aluminium housing and clear glass , 240 volt, 50HZ, AC supply , complete with all accessories including electronic driver, internally pre wired including connecting with three core flexible copper conductor cable from Electric Supply Source to connector of the light as in repair complete all as specified and as directed by the Engineer-in-Charge.

S & F LED post top luminaire 20W- 25W, 5700K, IP-65 made of pressure die-cast aluminium housing & clear glass 240 volt, 50HZ, AC supply complete with all accessories, including electronic driver, internally pre wired including provision of 3 core PVC flexible copper conductor from electric supply source to connector of the light, including disconnecting and taking down existing light fitting and removing old unserviceable fitting complete all as specified and as directed by the Engr-in-charge.

S & F LED high bay/medium bay luminaire 80-90 watt, IP-65,indoor type input voltage range 120-270 volts including electronic driver, provision of 3 core copper conductor cable 1.5 Sqmm size from connector/ceiling rose to fitting with fixing arrangement as per site requirement/conditions and including removing old unserviceable fitting complete all as specified and as directed by the Engr-in-charge.

S&F single pole and neutral enclosure with a two pin and earth plug and socket 20 Amp complete with and including one single pole MCB.20 Amp, 10 KA 'B' curve including removing old unserviceable enclosure complete all as specified and as directed by the Engr-in-charge.

Supply and fix sheet metal enclosure Vertical triple pole & neutral(VTPN) with MCCB 100 Amp, 16 KA, 415 volts, 4 way with 200 Amp rated bus bar flush /surface mounting double door duly grouted in solid block wall or on wooden board in and including lugs/thimbles duly crimped for connection including making smooth the disturbed surface including removing old unserviceable enclosure complete all as specified and as directed by the Engr-in-charge.

Supply and fix sheet metal enclosure triple pole & neutral(TPN) with MCB 63 Amp, 16 KA, 415 volts, 4 way with 200 Amp rated bus bar flush /surface mounting double door duly grouted in solid block wall or on wooden board in and including lugs/thimbles duly crimped for connection including making smooth the disturbed surface including removing old unserviceable enclosure complete all as specified and as directed by the Engr-in-charge.

Supply and fix sheet metal MCB DB SPN 2 way with 200 Amps rated bus bar single pole and neutral with double door IP-54 fixed on wall duly grouted in solid block wall or on wooden board in and including copper lugs/thimbles duly crimped for connection, including making smooth the disturbed surfaces including removing old unserviceable enclosure complete all as specified and as directed by the Engr-in-charge.

Supply and fix sheet metal MCB DB SPN 4 way with 200 Amps rated bus bar single pole and neutral with double door IP-54 fixed on wall duly grouted in solid block wall or on wooden board in and including copper lugs/thimbles duly crimped for connection, including making smooth the disturbed surfaces including removing old unserviceable enclosure complete all as specified and as directed by the Engr-in-charge.

Supply and fix sheet metal MCB DB SPN 8 way with 200 Amps rated bus bar single pole and neutral with double door IP-54 fixed on wall duly grouted in solid block wall or on wooden board in and including copper lugs/thimbles duly crimped for connection, including making smooth the disturbed surfaces including removing old unserviceable enclosure complete all as specified and as directed by the Engr-in-charge.

Supply and fix sheet metal MCB DB SPN 12 way with 200 Amps rated bus bar single pole and neutral with double door IP-54 fixed on wall duly grouted in solid block wall or on wooden board in and including copper lugs/thimbles duly crimped for connection, including making smooth the disturbed surfaces including removing old unserviceable enclosure complete all as specified and as directed by the Engr-in-charge.

Supply and fix MCB SP, 6-40 Amps, 240 volt,10 KA , 'B' curve as per site requirement including removing old unserviceable MCB complete all as specified and as directed by the Engineer-in-Charge.

Supply and fix MCB SPN, 32/40 Amps, 240 volt,10 KA , 'B' curve as per site requirement including removing old unserviceable MCB complete all as specified and as directed by the Engineer-in-Charge.

Supply and fix MCB SPN, 63 Amps, 240 volt,10 KA , 'B' curve as per site requirement including removing old unserviceable MCB complete all as specified and as directed by the Engineer-in-Charge.

S & F in repair MCB three pole and neutral 415 Volts, 63-100 Amps, 16 KA, 50 Hz thermal adjustable type complete all as specified and directed by the Eng-in-charge.

S & laying as in repair sub main wiring with two run of 4 sqmm PVC insulated , unsheathed cable FRLS-H,1100 volts grade ISI marked with multi stranded copper conductor and one run of 4 sqmm PVC insulated , unsheathed cable FRLS-H, 1100 volt grade ISI marked multi stranded copper conductor as earth continuty conductor connected to common earth dolly including concealed on wall/ceiling surfaces in and including PVC conduit medium grade ISI marked of adequate size for housing the wires complete all as specified and as directed by the Engineer-in-Charge. Note: (i) Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB. (ii) Three runs of cable and one run of PVC conduit shall be measured and paid as one unit length.

S & laying as in repair sub main wiring with two run of 6 sqmm PVC insulated , unsheathed cable FRLS-H,1100 volts grade ISI marked with multi stranded copper conductor and one run of 6 sqmm PVC insulated , unsheathed cable FRLS-H, 1100 volt grade ISI marked multi stranded copper conductor as earth continuty conductor connected to common earth dolly including concealed on wall/ceiling surfaces in and including PVC conduit medium grade ISI marked of adequate size for housing the wires complete all as specified and as directed by the Engineer-in-Charge. Note: (i) Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB. (ii) Three runs of cable and one run of PVC conduit shall be measured and paid as one unit length.

Supply and laying or fixing or passing through pipe 1100 volts grade heavy duty 2 core, 6 sq mm nominal cross section cable with PVC insulated aluminium conductor multistranded served with an inner sheathing of PVC tape and overall PVC sheathed in service connection, including disconnecting and taking down old U/S existing cable complete all as specified and as directed by the Engineer-in-Charge.

Supply and laying or fixing or passing through pipe 1100 volts grade heavy duty 2 core, 10 sq mm nominal cross section cable with PVC insulated aluminium conductor multistranded served with an inner sheathing of PVC tape and overall PVC sheathed in service connection, including disconnecting and taking down old U/S existing cable complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing LED batten fitting 18-20 watt, 4 feet, PVC housing cool/warm type industrial model complete, connecting with copper conductor flexible cable from ceiling rose to connector of the light as in repair complete all as specified and as directed by the Engineer-in-Charge.

Supplying and fixing in replacement LED tube rod 18/20 watt, 4 feet, aluminium body, cool/warm tube rod industrial model with high frequency power factor suitable for surface mounting batten fitting complete including disconnecting and taking down unservicable tube rod of any type complete all as specified and as directed by the Engineer-in-Charge.

S&F LED 22 watt integrated batten fitting with inbuilt lithium ion battery with minimum 4 hour back up including removing of unservicable light fitting complete all as specified and as directed by the Engineer-in-Charge.

S&F LED lamp Invertor technology 9 watt with 4 hour power back up with efficiency more than 100 lumen per watt,Lithium ion battery including removing of unservicable lamp complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing as in repair PCB unit suitable for BLDC ceiling fan of 1200mm sweep single phase, 240 volts of make crompton, Halonix, Havells etc complete all as specified and as directed by the Engr-in-charge.

Supply and fix as in repair modular PVC sheet/cover plate 3 way suitable for fixing switch/socket/fan regulators etc on existing MS boxes of any make as per site requirement including removing unserviceable items, complete all as specified and as directed by the Engr-in-charge.

Supply and fix as in repair modular PVC sheet/ cover plate 4 way suitable for fixing switch/socket/fan regulators etc on existing MS boxes of any make as per site requirement including removing unserviceable items, complete all as specified and as directed by the Engr-in-charge.

Supply and fix as in repair modular PVC sheet / cover plate 6 way suitable for fixing switch/socket/fan regulators etc on existing MS boxes of any make as per site requirement including removing unserviceable items, complete all as specified and as directed by the Engr-in-charge.

Supply and fix as in repair modular PVC sheet / cover plate 8 way suitable for fixing switch/socket/fan regulators etc on existing MS boxes of any make as per site requirement including removing unserviceable items, complete all as specified and as directed by the Engr-in-charge.

Supply and fix as in repair modular PVC sheet / cover plate 12 way suitable for fixing switch/socket/fan regulators etc on existing MS boxes of any make as per site requirement including removing unserviceable items, complete all as specified and as directed by the Engr-in-charge.

S&F MCCB 4 pole , 63 Amp, 415 Volts, 16 KA , fixed type including fixing arrangement, including removing old Unserviceable MCCB complete all as specified and as directed by the Engr-in-charge.

S&F MCCB 4 pole , 100 Amp, 415 Volts, 16 KA , fixed type including fixing arrangement, including removing old Unserviceable MCCB complete all as specified and as directed by the Engr-in-charge.

Disconnecting electric/water supply connection, taking down carefully geyser of any capacity, deposting to MES store yard for repair and refixing the same after repair at desired location complete all as specifed and directed by Engr-in-Charge.

Supply & replacing inner tank made from 1mm thick stainless steel sheet for geyser of 50 Ltr capacity including taking out old unserviceable inner tank complete all as specified and as directed by the Engr-in-charge.

Supply & replacing inner tank made from 1mm thick stainless steel sheet for geyser of 25 Ltr capacity including taking out old unserviceable inner tank complete all as specified and as directed by the Engr-in-charge.

M&L painting with two coats of synthetic enamel paint to Geyser of any capapcity and writing the MES No after preparing the old painted surfaces by scraping, rubbing and cleaning the dust,rust existing painting complete including taking down and refixing the geyser all as specified and directed by Engr in Charge.

S & fixing heating element cup or triangle type of 2 KW as required at site for geyser of any make and any descriptions including taking out old unserviceable heating elements all as specified and as directed by the Engr-in-charge.

S & F thermostat switch for geyser of any type ISI marked including taking out old unserviceable thermostat switch complete all as specified and as directed by the Engr-in-charge.

S & F geyser inner tank assembly suitable for geyser capacity of 25 Ltr including taking out old unserviceable tank assembly complete all as specified and as directed by the Engr-in-charge.

S & F geyser inner tank assembly suitable for geyser capacity of 50 Ltr including taking out old unserviceable tank assembly complete all as specified and as directed by the Engr-in-charge.

S&F brass chromium plated non return valve 15mm bore with air lock release arrangement including taking out old unserviceable non return valve, complete all as specified and as directed by the Engr-in-charge.

S & replacing metal clad socket top as per existing socket including taking out old unserviceable metal clad top, complete all as specified and as directed by the Engr-in-charge.

M&L 12 mm dia bolt, 100mm long with nut & washer and grouted the same in brick wall built in cement mortar for fixing geyser complete all as specified and as directed by the Engr-in-charge.

S & F in replacement flexible cable PVC insulated and sheathed, 3 core, circular multi stranded copper conductor of 1.50 Sqmm including removing unserviceable cable, complete all as specified and as directed by the Engr-in-charge.

S&F brass connection pipe 450mm long having wire mesh coating over it with brass nuts and washers suitable for connecting geysers inlet and outlet with GI tubings including taking out old unserviceable connections all as specified and as directed by Engr-in-charge.

S&F brass connection pipe 600mm long having wire mesh coating over it with brass nuts and washers suitable for connecting geysers inlet and outlet with GI tubings including taking out old unserviceable connections all as specified and as directed by Engr-in-charge.

S&F top plug 15 Amp, 3 pin including taking out old unserviceable plug top complete all as specified and as directed by the Engr-in-charge.

S&F indicating lamp green/red in colour 230 volts as per existing make including removing unserviceable items,complete all as specified and as directed by the Engr-in-charge.

S & F as in repairs electronic LED driver suitable for 36 to 40 watt LED panel light 2'X2' complete all as specified and as directed by the Engineer-in-Charge. Note: - Make of electronic LED driver shall be of same make of existing LED light.

S & F as in repairs electronic LED driver suitable for 45 watt LED security light fitting complete all as specified and as directed by the Engineer-in-Charge. Note: - Make of electronic LED driver shall be of same make of existing LED light.

S & F as in repairs electronic LED driver suitable for 10-30watt LED Post Top Lantern complete all as specified and as directed by the Engineer-in-Charge. Note: - Make of electronic LED driver shall be of same make of existing LED light.

S & F as in repairs electronic LED driver suitable for 10-15 watt LED down lighter light fitting complete all as specified and as directed by the Engineer-in-Charge. Note: - Make of electronic LED driver shall be of same make of existing LED light.

S & F as in repairs electronic LED driver suitable for upto 10 watt LED down lighter light fitting complete all as specified and as directed by the Engineer-in-Charge. Note: - Make of electronic LED driver shall be of same make of existing LED light.

S & F as in repairs electronic LED driver suitable for 80-120 watt LED flood light & high/medium bay light fitting complete all as specified and as directed by the Engineer-in-Charge. Note: - Make of electronic LED driver shall be of same make of existing LED light.

Taking down ceiling/exhaust/wall mounted/pedestal fans of any sweep of any make with down rods, blades canopy etc by disconnecting the electric connections and deposit at fan store of AGE E/M north for issuing of fan to contractor for repair, and collecting the fan after repair and hanging the same at location as directed by the concerned JE E/M complete all as specified and as directed by the Engr-in-charge.

Suuply and fix in repair ceiling fan, AC, single phase, 230 V, 50 Hz, copper wounded, of 1200mm sweep copper wire induction motor with 5 star BEE rating, including canopy cover, down rod 'U' clamp, 3 core PVC flexible cable 1sqmm for making connection of fan and hanging the fan in clamp, connecting with exiting electrical connection all as specified and directed by the Engr-in-charge.

Supply, fixing and testing water heater (Geyser) metal outer body with stainless steel tank of capacity 25 ltrs including all accessories like, NRV, heavy duty PVC Connection and making good surafce area with new hold fasterner connection complete all as specified and directed by Engr-in-Charge.

M&L for opening the stator & rotor of the 1200mm sweep ceiling fan, cutting the existing worn winding & rewinding the fan with superior quality copper wire & filling the varnish as insulation between each winds & covering each loops of winding by sleeves & paper & reassembling of complete fan by fixing serviceable old and new parts of fans i.e. rubber bush, condensor & shackle housing , gun metal bushes, ball bearings, twin twisted copper cable, down rod assembly & canopy ,split pins complete all as per manufacturers design air delivery including greasing, oiling & testing of fans all as per manufacturers design & speed complete all as directed & approved for 1200mm sweep. Notes for item NO (i) to (vii) :- (i). The quoted unit rate shall be deemed to be inclusive of taking out defective parts and fixing of new parts. All new parts shall be measured and paid vide relevant items of the schedule. (ii). The rates for refixing & taking out serviceable parts shall be deemed to be included of quoted unit rates. (iii). New parts shall be of respective makes of fans. (iv). The quoted unit rates shall also include writing of MES No on fans (v). Unserviceable /defective retrieved parts shall be credited vide sch of credit. (vi). After assembling all fans shall be tested for the speed as directed. (vii). All the fans shall be repaired/rewind at AGE E/M store yard only.

Description all as per srl item No 84 here-in-before but for 1400 mm sweep, complete all as specified and as directed by the Engr-in-charge.

Description all as per srl item No 84 here-in-before but for Exhaust fans of 225/250mm sweep, complete all as specified and as directed by the Engr-in-charge.

Description all as per srl item No 84 here-in-before but for Exhaust fans of 300mm sweep, complete all as specified and as directed by the Engr-in-charge.

Description all as per srl item No 84 here-in-before but for Exhaust fans of 450mm sweep, complete all as specified and as directed by the Engr-in-charge.

Supply and fixing as in repair heavy duty wall mounting fan 450 mm sweep with corrosion resistant PVC body, minimum noise, operation and maintenance free design, totally enclosed, highly efficient, heavy duty motor with pressure die cast aluminium rotor mounted on two ball bearings, aerodynamically contoured blades, rigid frame , 1400 RPM, PVC blades and testing complete all as specified and as directed by Engineer-in-Charge.

Supply only GI 'D' clamp heavy duty of superior quality and nut and bolts with locking arrangement complete all as specified and as directed by the Engr-in-charge.

Supply only PVC canopy cover superior quality complete all as specified and as directed by the Engr-in-charge.

Supply and fixing as in repair heavy duty exhaust fan 300mm sweep with corrosion resistant steel body, minimum noise, operation and maintenance free design, totally enclosed, highly efficient, heavy duty motor with pressure die cast aluminium rotor mounted on two ball bearings, aerodynamically contoured blades, steel base frame with rubber mountings for silent operation, 6 pole, maximum watt input not more than 37 watt, 1100 RPM, minimum air delivery 810 cum/hour with metal blades and shutter type louvers self-openable/ closeble for protecting the entrance of birds as per IS :2132-1967 and testing complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing as in repair heavy duty exhaust fan 250mm sweep with corrosion resistant steel body, minimum noise, operation and maintenance free design, totally enclosed, highly efficient, heavy duty motor with pressure die cast aluminium rotor mounted on two ball bearings, aerodynamically contoured blades, steel base frame with rubber mountings for silent operation, 6 pole, maximum watt input not more than 37 watt, 1100 RPM, minimum air delivery 810 cum/hour with metal blades and shutter type louvers self-openable/ closeble for protecting the entrance of birds as per IS :2132-1967 and testing complete all as specified and as directed by Engineer-in-Charge.

Supply, fixing and testing as in repair automatic pressure pump of capacity 0.5 HP to maintain the desired pressure at end level from running water supply including placing on suitable plinth with the help nut, bolt and washer and connected item with connection with existing GI pipe complete all as specified and directed by Engr-in-Charge.

M&L for cleaning the fan motor assembly body, blade of ceiling fan, filling the cavity rubbing with sand paper, taking off old paint with the help of chemicals & painting the ceiling fan/Exhaust fan with one coat of superior quality synthetic enamel paint including writing the MES number on the ceiling fans of 1200mm sweep with black colour synthetic enamel paint including greasing complete all as specified and as directed by the Engr-in-charge.

Description all as per srl item No 95 here-in-before but for 1400 mm sweep, complete all as specified and as directed by the Engr-in-charge.

Description all as per srl item No 95 here-in-before but for Exhaust fans of 250/300mm sweep, complete all as specified and as directed by the Engr-in-charge.

Description all as per srl item No 95 here-in-before but for Exhaust fans of 450mm sweep, complete all as specified and as directed by the Engr-in-charge.

Supply only bearing for 1200/1400mm sweep ceiling fans , complete all as specified and as directed by the Engr-in-charge.

Supply only bearing for 250 to 450 mm sweep Exhaust fans, complete all as specified and as directed by the Engr-in-charge.

Supply and fixing round clamp of suitable size for hanging of 1200-1400 mm ceiling fans in 40/50 mm GI pipe, as in repair complete all as specified and as directed by the Engr-in-charge.

Supply only gun metal bush suitable for 1200/1400mm sweep ceiling fan ,complete all as specified and as directed by the Engr-in-charge.

Suuply and fixing MS louver and shutter self openanble/closable suitable for exhaust fan 300 mm sweep superior quality including taking down old unsv shutter from any height complete all as specified and directed by Engr-in-Charge.

Material & labour for earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25m deep below the ground level) with top edge of the plate not less than 1.5mtr below the normal ground level connected to galvanised earth wire 4mm dia by means of bolts, nuts, check nuts and washers of galvanised iron.Earth wire protected by GI pipe 15mm bore(medium grade) and connected to earthing test point as directed and as specified and shown in electrical plate No. 3 of SSR Part I (2009) including necessary concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 40 cm x 40cm x 5cm reinforced with 8mm dia TMT bars @ 15cm c/c both ways with one handle for lifting made out of 8mm dia bar, funnel, wire mesh, 20mm dia GI pipe medium grade for watering, charcoal or coke and salt in alternate layers including necessary excavation and earth work in any type of soil and testing as in repair complete all as directed by Engineer-in-Charge and earth testing on completion .

Supply only PVC rigid casing caping 20 mm dia medium grade fixed on wall/on ground with coupler, lock nut, saddles, pipe hooks etc. including all fitting such as Tee, bend, elbow, reducer, bell mouth tube end etc. complete all as specified and directed by Engr-in-Charge.

Supply only PVC rigid conduit 20 mm dia medium grade fixed on wall/on ground with coupler, lock nut, saddles, pipe hooks etc. including all fitting such as Tee, bend, elbow, reducer, bell mouth tube end etc. complete all as specified and directed by Engr-in-Charge.

Supply only switch piano, flush type, single pole, one way, 6 Amp ,complete all as specified and as directed by the Engr-in-charge.

Supply only bell push 6 Amp, flush type, complete all as specified and as directed by the Engr-in-charge.

Supply only socket outlet 2 in 1, 3 pin, 6 Amp, flush type , complete all as specified and as directed by the Engr-in-charge.

Supply only switch piano, flush type, single pole, one way, 16 Amp complete all as specified and as directed by the Engr-in-charge.

Supply only socket outlet, 2 in 1, 6 pin, 6 and 16 Amp, flush type, 230 volts complete all as specified and as directed by Engineer-in-Charge.

Supply only Step fan regulator electronic socket type, flush type 230 volt , complete all as specified and as directed by the Engr-in-charge.

Supply only Step fan regulator electronic switch type, flush type 230 volt complete all as specified and as directed by the Engr-in-charge.

Supply only capacitor 2.5 MFD for ceiling fan of any description complete all as specified and as directed by the Engr-in-charge.

Supply only capacitor 3.15 MFD dry type complete all as specified and as directed by the Engr-in-charge.

Supply only capacitor 4 MFD dry type complete all as specified and as directed by the Engr-in-charge.

Supply only flexible cable PVC insulated and sheathed, 2 core, circular multi stranded copper conductor of 23/0.076 Sqmm including removing unserviceable cable, complete all as specified and as directed by the Engr-in-charge.

Material and labour for laying 1.50 Sqmm single core PVC insulated , unsheathed cable FRLS-H, 1100 volt grade with multi stranded copper conductor drawn through existing conduit/casing & caping as in repair complete all as specified and as directed by the Engr-in-charge. Note:- Thimble/lugs of rating of MCB shall be used with wire for fixing in MCB

Material and labour for laying 2.50 Sqmm single core PVC insulated , unsheathed cable FRLS-H, 1100 volt grade with multi stranded copper conductor drawn through existing conduit/casing & capping as in repair complete all as specified and as directed by the Engr-in-charge. Note:- Thimble/lugs of rating of MCB shall be used with wire for fixing in MCB

Material and labour for laying 4.00 Sqmm single core PVC insulated , unsheathed cable FRLS-H, 1100 volt grade with multi stranded copper conductor drawn through existing conduit/casing & capping as in repair complete all as specified and as directed by the Engr-in-charge. Note:- Thimble/lugs of rating of MCB shall be used with wire for fixing in MCB

Material and labour for laying 6.00 Sqmm single core PVC insulated , unsheathed cable FRLS-H, 1100 volt grade with multi stranded copper conductor drawn through existing conduit/casing & capping as in repair complete all as specified and as directed by the Engr-in-charge. Note:- Thimble/lugs of rating of MCB shall be used with wire for fixing in MCB

Supply and fixing concrete pit in PCC (1:3:6) type C1 of size 40x40x40 cm having hollow inner space 30 cm, pre-cast RCC (1:2:4) type B1 cover slab 50 cm x 50cm x 5cm reinforced with 8mm dia TMT bars @ 15cm c/c both ways with one handle for lifting made out of 8mm dia bar complete all as specified and directed by Engr-in-Charge.

M &L Preventive maintenance of earth pit by checking earth resistance value of earth and maintain the record before and after treatment of earth by pouring of salt (if required for improving the earth resistance value less than 5 ohm it also includes repair to plaster all as directed by EIC.

Excavation in trenches, n. exc 1.5 m wide and n. exc 1.5 m in depth for foundation etc.and getting out for hard/dense soil complete all as specified and as directed by the Engineer-in-Charge.

Supply & Laying or fixing or passing through pipe for cable XLPE insulated, armoured heavy duty electric cable with multistranded aluminium conductor 1100 volts grade 4 core of size 25 Sq.mm. complete all as specified and as directed by the Engineer-in-Charge.

Supply and lay GI tubes light grade with connected fittings laid in trenches/wall/ pole for protection to UG cables of size 25 mm dia. complete all as specified and as directed by the Engineer-in-Charge. Make: Surya/Jindal/TATA

M&L for cushioning for protection of cable using dry river sand, free from particles complete all as specified and as directed by the Engineer-in-Charge.

M&L for Protection to cable with one layer of new bricks laid flat butting to each other in such a way that the length of the bricks is at right angle to the central axis of the cable using old size sub-class ‘B’ bricks complete all as specified and as directed by the Engineer-in-Charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm for soft/loose soil complete all as specified and as directed by the Engineer-in-Charge.

Removing excavated material n.exc 50m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and as directed by the Engineer-in-Charge.

Supply only down rod 60cm long made out of 15/12 mm bore light grade GI /MS pipe having provision of fixing U clamp & Fan including painting the pipe with superior quality white colour synthetic enamel paint complete all as specified and as directed by the Engr-in-charge.

Supply only down rod 100cm long made out of 15/12 mm bore light grade GI /MS pipe having provision of fixing U clamp & Fan including painting the pipe with superior quality white colour synthetic enamel paint complete all as specified and as directed by the Engr-in-charge.

Supply and fixing LED batten fitting 18-20 watt, 4 feet, PVC housing warm type industrial model complete, connecting with copper conductor flexible cable from ceiling rose to connector of the light as in repair complete all as specified and as directed by the Engineer-in-Charge.

S & F recess mounted direct-indirect circular LED luminaire 2'X2', 34 watt (26+8 watt) warm /cool day light with uniform light distribution, white colour powder coated deep drawn housing unique floating spherical high effeciency translucent PMMA diffuser for direct lighting with high effeciency LEDs, constant current, costant voltage driver with effeciency of min 85% suitable for grid / POP ceiling complete all as specified and as directed by Eng-in-charge. Make : Wipro cat part No : LM38-461-XXX-57-XX and 9180P01089 or equivalent make in Philips, GE lighting, Havells

Supply and fixing 36W , 2’X2’ surface mounted Luminaire with housing made up of CRCA powder coated made up of High transmittance diffuser for glare free symmetric light distribution., Powered by Isolated, SELV output Electronic Driver with Output Short-circuit protection, Surge Voltage protection and other safety & performance test as per IS:15885 Part 2/Sec 13. Power Consumption should not greater than 36W and System Efficacy not less than 100 Lumens/Watt, CCT 5700K PF>0.95, CRI>80 ,THD<10%. Operating temperature: -10 °C to +35 °C , Operating voltage range: 140 V - 270 V. Built in PIR Sensor. Luminaire Should conform to IP20 Classification. Test report to be submitted; photo biological safety norms: IS16108, test certificate to be submitted; certification: LM 79 for luminaire and LM80 for led source, Driver and Fixture to be BIS certified as in repair complete all as specified and as directed by the Engr-in-charge.

S& F ( in repair) gang box 1 module surface type suitable for mounting of 6 /16 switch complete all as specified and as directed by the Engineer-in-Charge.

S& F ( in repair) gang box 3 module surface type suitable for mounting of 6 /16 switch and socket complete all as specified and as directed by the Engineer-in-Charge.

S& F ( in repair) gang box 6 module surface type suitable for mounting of 6 /16 switch and socket complete all as specified and as directed by the Engineer-in-Charge.

Supply, fixing, connecting & testing 12 volts, 150 AH tubular battery with lead acid terminals, connection with UPS/inverter battery complete all as specified including disconnecting existing unserviceable battery.

Supply & fix Uninterrupted power supply system of 600 VA / 360 Watts complete all as specified and as directed by the Engineer-in-Charge.

Supply & fixing geyser assembly along with heating element incology+GL coating / Copper + Ni coating as per existing make (Bajaj, crompton, Havells) suitable for MS glass lined type tank / MS polymer coated type tank / stainless steel tank for geyser of capacity 25 ltr including taking out old unserviceable heating element,complete all as specified and as directed by the Engr-in-charge.

Note:- Amount of credit of Rs. 2,17,336.00 for retrieved materials is mentioned in Schedule of Credit Page No. 41 to 42 of tender documents in pdf form which will be deducted offline while acceptance of tender.

Saurav Enterprises

gurchan singh & sons.

R N Enterprises

Mohinder Pal and Sons