General

Supply and delivery of 200mm dia "Resilient Seated Soft Sealing Gate Valves (Sluice Valves) with Body and Bonnet of Ductile lron GGG-40/5G-400/15 or GGG-50/SG-500/7 or Equivalent as per 151865, 1IS.3896-2 and Wedge fully Rubber Lined wvith food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-0 ring protection system on the Shaft 1 and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as B5:5163 Type AI5:14846 All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min |250 Microns)-RAL 5005 with Pocket Lless Straight through body Passage conforming to Design standards of DIN-3202F4/ B5.51 63 Type A Flange drilig as per I5-1538 excluding alltlaxes, duties and transportation.

Supply, Delivery of 200mm dia D.I Double Flanged Swing Check type Reflux valves (Non Return Valves) of following dia. conforming to IS- 5312 (Pts-182) (with amendments up to date, if any) having Body, Cover, Door, Bearing holder with D.I; Hinge pin, Door pin, Door suspension pin with Stainless Steel (IS ? 6603); Body seat ring , Door face ring, Bearing bushes, Plugs for hinge pin with Leaded Tin Bronze ( IS 318 ); Bolts, Nuts with Carbon steel; Gaskets with Rubber; Hinges with Cast steel including transportation but excluding Taxes. (P.H |tems, P.82)

Lowering, keeping in position and fixing C.l. sluice valves (with cap/ with hand 3 wheel & reflex valves) excluding cost of bolts, nuts, rubber insertion, sluice valve and tail pieces - 1 No. (PHE-CISV-15)

Jointing the C. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85. unit each data for 10 oints as per PHE-JCIF-5 (P.879)

Cost of MS Flanges including cost of Bolts, Nuts, Rubber Packing etc., complete and flange thickness confirming to 1S:7322 -1985 and flange dimensions confirming to 1S:1538-1993 excluding Cost of MS barrel including cost and conveyance to site,excluding Taxes etc., complete, (Rate per each Flange)

200 MM ms Flanges

150 mm MS Flanges

Supply and fixing of M.S Plates and its fabrication charges etc., complete for 6 MS Pipes-1 Kg.

Earthwork excavation in Ordinary soil by Manual Means upto 3 m depth for structures as per drawing and technical specifications Clause 305.1 including 7|setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per

Filling of Stone Crusher Dust for foundation trenches including cost and 8 conveyance off all materials and all labour charges ramming, watering etc, as per drawing and technical specification in Clause 305.3.9 MORD & 304 MORT

Bailing out water from the pipe line trenches with oil engine driven pump sets including hire charges, fuel charges and wages for Driver and Helper.

Providing concrete for plain/reinforced concrete (M20) in open foundations using 20 mm Graded hard stone aggregate , mechanically mixed, placed in 10 foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 MORD and 1500,1700 & 2100 MORTH.

Supply and delivery of LT Control Panel suitable for 37 KW/ 50 HP Motor including cost of LT Automatic Star & Delta Starter, MNX Contractor, MCCB, Aluminium Busbars, Relays, Capactitors, Digital Ammeter, Digital Voltmeter |internal wiring and MCBs etc., complete as per requirement as directed by Engineer-in-charge

S &D hsc pumpset of kirloskar with speciofications of discharge and Head range of 288 Cum/Hr with a dynamic head of 30 mtrs, "''" Speed 1480 (syn) RPM, suction & delivery sizes of 150 mm X 125 mm, efficiency should not less than 75%, pump material constructions of casing with cast iron, impeller and wearings with cast iron, shaft and shaft Sleeves with 40CB, arrangement of gland packing, cooling system. the pump driven with 37 KW LT Squirrel cage induction Motor with specifications of 3 Phase, 415 Volts, 50HZ, solid shaft TEFC enclosure, IE-2 claas, 'F' Class insulation, suitable to voltage variation +/- 10% & frequency variation +/- 5% confirming to 1S 325/1S 4722 with the accessories of common base frame, love joy Coupling, coupling guard etc., complete including submitting of test certificate from the farn|ete chares includine astand rowawance af ill

Labour charges for erection and commissioning of Motor and Pumpset 13 including cost of all materials and labour etc., complete as directed by the departmental engineer-in charge

Supply of Single Core, 50 Sq mm ISI marked, PVC insulated and sheathed 14 FRLS/FRLS-H round copper cable for voltage up to 1100V as per IS 694/1990. brands as category

Provision for Seignorage charges

Provision Towards Demerit 2%

Provision Towards Consideration Fee Amount @100%

Provision Towards DMF 30%

Provision for NAC @ 0.10%

Provision for GST @ 18%

Provision for TPQA @ 0.739 %

Unforeseen item