67/EWC(B)/2023-24

Amount

(PART-A) CONSTRUCTION OF NEW 33 KV LINE OF LENGTH 6.0 KM FOR 33/11 KV S/S MEERGANJ TEHSIL FROM 132 KV S/S MEERGANJ TO TAPPING POINT OF OLD MEERGANJ TEHSIL LINE, BAREILLY

Carriage of following line materials for 33 KV line from any Store Centre of Bareilly zone, Bareilly to site of work including measuring, weighing, loading, unloading at both ends and proper stacking at safe site.

33 KV 3X300mm2 XLPE Cable

33 KV 3X300mm2 XLPE Cable jointing kit O/D

33 KV 3X300mm2 XLPE Cable jointing kit S/through

ST pole 11 Mtr. Long

9.0 M long PCC pole

33 KV cross arm

33 KV pin insulator

33 KV pin with nut

M.S. Earthing rod

M.S angle 65x65x6mm, 2700mm

Top channel 125x65x6mm 3200mm

T- Off Channel 125x65x1300mm

ACSR Dog conductor

11 KV disc insulator B&S type 70 KN

Disc fitting Dog/Racoon 70 KN

Complete Stay set complete

Gaurding angle 65x65x2950

G.I wire 8 Swg

Erection of the following support including cutting, making holes, fixing of all types of accessories digging pits complete in all respect as per RESSPO drawing. All types of clamps nuts & bolts,stone pad, washer would be provided by contractor.

Single support of ST Pole 11mtr long.

Single support of PCC Pole 09mtr long.

Double pole structure on PCC Pole 09mtr long complete with bracing.

Double pole cable exposer of PCC pole

End type double pole structure on PCC Pole 09mtr long complete with bracing.

Tri pole structure on ST Pole 11mtr long complete with bracing.

Four pole structure on ST Pole 11mtr long complete with bracing.

Erection/fixing for stay set with stay wire and clamp as per RESSPO drawing including binding, clamping, tightening, and nozzeling etc. complete in all respect including its grouting in ratio 1:4:8 of cement, sand and brick ballast and sand before back filling of the pits as per RESSPO schedule all clamps, nuts & bolts, cement, brick, concrete etc would be provided by contractor.

Concreting of supports in 1:4:8 ratio and plinthing of supports upto 300mm above ground level by using cement, sand & coarse aggregate in ratio 1:4:8 as per RESSPO drawing with watering/curing properly upto proper setting of plinthing.All matrial would be provided by the contractor.

Laying and sagging of 3 phase ACSR Dog conductor from Double pole upto the gentry at 220KV substation / 33KV substation including jumpering, hoisting, fixing of all type of insulators, binding, jointing and its clamping etc. in all respect.

Earthing of each S.T Poles of the line is to be done by inserting the MS earth rod (1800x20mm) into soil by hammering and properly fastning with GI wire to each support by nut & bolt. Earthing rod must be 0.15Mtr.above from the plinth of the support. All type nut & bolt would be given by the contractor.

Earthing of each PCC Poles of the line is to be done by inserting the MS earth rod (1800x20mm) into soil by hammering and properly fastning with GI wire to each support by nut & bolt. Earthing rod must be 0.15Mtr.above from the plinth of the support. All type nut & bolt would be given by the contractor.

Fabrication and fixing of guarding angle on Single/double poles, Stringing and sagging of three nos. Earth/GI wire with cardle guarding of above 33 KV line as per RESSPO Norms including provision of all necessary clamps and hooks. Shifting of existing line conductor of 11 KV/LT line to maintain proper clearance in between both lines (all required material will be provided by the contractor except guarding angle and earth/GI wire).

Painting of following supports with one coat of red oxide primer and two coats of aluminum white paint of ISI mark and top danger portion of each support must be painted by providing two coat of Post Office Red Paint (1.5mtr upper portion of support.) Paint and material would be given by contractor to complete the job.

Single Pole of S.T Pole .

Tri pole

Four Pole of S.T Pole .

Fixing of danger board, number plate on each location and G.I barbed wire including proper clamping and providing anti climbing device by using including supply of the above items.

Laying of single circuit 33 KV 3X300 Sq. mm XLPE cable in normal soil by digging of trench 1050 mm deep, 750 mm wide including supply of required material as fine sand, 1st class bricks, stone slab. Inter axial spacing between the two cable should be in between 0.25 m to 0.40m including fixing of cable route marker with difference of 50 mtr. at time of cable laying with complete engraved details of 33 KV Line and depth of 33 KV cable. (All the material required for laying will be supplied by the contractor except 33 KV XLPE cable)

Cable laying by drill method single circuit in HDPE Pipe including fixing of cable route marker with difference of 50 mtr. at time of cable laying with complete engraved details of 33 KV Line and depth of 33 KV cable.

Cable laying by drill method single circuit including fixing of cable route marker with difference of 50 mtr. at time of cable laying with complete engraved details of 33 KV Line and depth of 33 KV cable.

Hoisting of 33 KV 3X300 Sq. mm. XLPE cable on double pole with GI pipe of size 6" dia 3 M long including its jumpering complete with clamps, nuts and bolts.

Fixing of 33 KV O/D or I/D cable jointing kit.

Fixing of 33 KV S/Th cable jointing kit.

Making of triangular bridge by using MS electrode, GI strip 50x6mm and GI Pipe 40 mm dia with providing of well type pipe earthing upto 15 Mtr. depth below ground level including welding etc. by boaring process at double pole near railway crossing including cost of GI pipe of size 40 mm dia 15 mtr. long of ISI mark.(all the required material will be supllied by the contractor).

Clearing of the line route by cutting of tree branches during erection of line and also upto the time of energisation completely as per direction of Incharge.

(PART-B) CONSTRUCTION OF NEW 33 KV LINE OF LENGTH 8.2 KM FROM 220 KV S/S DATAGANJ TO TAPPING POINT OF 33 KV LINE DATAGANJ TOWN AT DAHARPUR FOR 33/11 KV S/S DATAGANJ RURAL , BADAUN

Carriage of following line materials for 33 KV line from any Store Centre of Bareilly zone, Bareilly to site of work including measuring, weighing, loading, unloading at both ends and proper stacking at safe site.

33 KV 3X300mm2 XLPE Cable

33 KV 3X300mm2 XLPE Cable jointing kit O/D

33 KV 3X300mm2 XLPE Cable jointing kit S/through

ST pole 11 Mtr. Long

9.0 M long PCC pole

33 KV cross arm

33 KV pin insulator

33 KV pin with nut

M.S. Earthing rod

M.S angle 65x65x6mm, 2700mm

Top channel 125x65x6mm 3200mm

T- Off Channel 125x65x1300mm

ACSR Dog conductor

11 KV disc insulator B&S type 70 KN

Disc fitting Dog/Racoon 70 KN

Complete Stay set complete

Gaurding angle 65x65x2950

G.I wire 8 Swg

Erection of the following support including cutting, making holes, fixing of all types of accessories digging pits complete in all respect as per RESSPO drawing. All types of clamps nuts & bolts,stone pad, washer would be provided by contractor.

Single support of ST Pole 11mtr long.

Single support of PCC Pole 09mtr long.

Double pole structure on ST Pole 11mtr long complete with bracing.

Double pole structure on PCC Pole 09mtr long complete with bracing.

Double pole cable exposer of PCC pole

End type double pole structure on PCC Pole 09mtr long complete with bracing.

Tri pole structure on ST Pole 11mtr long complete with bracing.

Four pole structure on ST Pole 11mtr long complete with bracing.

Erection/fixing for stay set with stay wire and clamp as per RESSPO drawing including binding, clamping, tightening, and nozzeling etc. complete in all respect including its grouting in ratio 1:4:8 of cement, sand and brick ballast and sand before back filling of the pits as per RESSPO schedule all clamps, nuts & bolts, cement, brick, concrete etc would be provided by contractor.

Concreting of supports in 1:4:8 ratio and plinthing of supports upto 300mm above ground level by using cement, sand & coarse aggregate in ratio 1:4:8 as per RESSPO drawing with watering/curing properly upto proper setting of plinthing.All matrial would be provided by the contractor.

Laying and sagging of 3 phase ACSR Dog conductor from Double pole upto the gentry at 220KV substation / 33KV substation including jumpering, hoisting, fixing of all type of insulators, binding, jointing and its clamping etc. in all respect.

Earthing of each S.T Poles of the line is to be done by inserting the MS earth rod (1800x20mm) into soil by hammering and properly fastning with GI wire to each support by nut & bolt. Earthing rod must be 0.15Mtr.above from the plinth of the support. All type nut & bolt would be given by the contractor.

Earthing of each PCC Poles of the line is to be done by inserting the MS earth rod (1800x20mm) into soil by hammering and properly fastning with GI wire to each support by nut & bolt. Earthing rod must be 0.15Mtr.above from the plinth of the support. All type nut & bolt would be given by the contractor.

Fabrication and fixing of guarding angle on Single/double poles, Stringing and sagging of three nos. Earth/GI wire with cardle guarding of above 33 KV line as per RESSPO Norms including provision of all necessary clamps and hooks. Shifting of existing line conductor of 11 KV/LT line to maintain proper clearance in between both lines (all required material will be provided by the contractor except guarding angle and earth/GI wire).

Painting of following supports with one coat of red oxide primer and two coats of aluminum white paint of ISI mark and top danger portion of each support must be painted by providing two coat of Post Office Red Paint (1.5mtr upper portion of support.) Paint and material would be given by contractor to complete the job.

Single Pole of S.T Pole .

Double Pole of S.T Pole .

Tri Pole of S.T Pole .

Four Pole of S.T Pole .

Fixing of danger board, number plate on each location and G.I barbed wire including proper clamping and providing anti climbing device by using including supply of the above items.

Laying of doublele circuit 33 KV 3X300 Sq. mm XLPE cable in normal soil by digging of trench 1050 mm deep, 750 mm wide including supply of required material as fine sand, 1st class bricks, stone slab. Inter axial spacing between the two cable should be in between 0.25 m to 0.40m including fixing of cable route marker with difference of 50 mtr. at time of cable laying with complete engraved details of 33 KV Line and depth of 33 KV cable. (All the material required for laying will be supplied by the contractor except 33 KV XLPE cable)

Cable laying by drill method single circuit in HDPE Pipe including fixing of cable route marker with difference of 50 mtr. at time of cable laying with complete engraved details of 33 KV Line and depth of 33 KV cable.

Cable laying by drill method single circuit including fixing of cable route marker with difference of 50 mtr. at time of cable laying with complete engraved details of 33 KV Line and depth of 33 KV cable.

Hoisting of 33 KV 3X300 Sq. mm. XLPE cable on double pole with GI pipe of size 6" dia 3 M long including its jumpering complete with clamps, nuts and bolts.

Fixing of 33 KV O/D or I/D cable jointing kit.

Fixing of 33 KV S/Th cable jointing kit.

Clearing of the line route by cutting of tree branches during erection of line and also upto the time of energisation completely as per direction of Incharge.

M/s Shubham Traders

NATIONAL CONTRACTOR & GENERAL ORDER SUPPLIER