REPAIR AND MAINTENANCE TO PLAY COURTS, OBSTACLES AND OTHER TRAINING FACILITIES IN CENTRAL AND SOUTH COMPLEX UNDER AGE B/R-I AT IMA DEHRADUN

Amount

Repairs to existing lawn tennis courts by authorised dealer of approved manufacturer with following specifications:- (a) Complete removal of exisitng synthetic flooring including bituminous macadam layers upto WBM level and removal outside from IMA campus. (b) Levelling and rolling of WBM surfaces using 8 to 12 tonne power roller including filling of undulations with mixer of graded crushed stone aggregate of required size and crusher stone dust including watering etc to maintain proper required level all complete as directed. (c) Preparing surfaces of rolled unsurfaced water bound macadam, by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with mechanical means (air compressor) to remove all loose dirt etc. and applying evenly a priming/tack coat with bituminous primer at 10 kg per Ten Sqm (Viscosity grade bitumen VG-10) complete all as specified and directed. (d) Material and labour for laying of 40mm consolidated thickness of premixed bituminous macadam laid & rolled with static roller complete to required slope as per ITF standards including using binder content 4% (Viscosity grade Bitumen VG-10) by weight of total mix complete all as specified and directed. (e) Material and labour for laying of 25mm thick bituminous premixed semi dense asphaltic concrete consolidated thickness with 5.50% binder content by weight of total mix rolled with static roller in required slope as per ITF standards using mixed brought from hot mix plant including cleaning and preparation of bituminious surfaces with bitumen primer/tack coat @ 5kg per 10 sqm (Viscosity grade bitumen VG-10), complete all as specified and directed. (f) Material and labour for laying of premixed sand seal coat with 0.06 cum of coarse sand or stone dust mixed with 6.8kg of bitumen rolled with static roller in uniform slope as per ITF standards using mixed brought from hot mix plant complete all as specified and directed. (g) Material and labour for laying of Acrylic Cushion Sports Flooring (8- Layers system) for lawan tennis court with hybride waterborne PU top coat finish of make:- Deco Turf USA ( ITF Approved ), Re Bound Ace India or Laykold. Sports court flooring should be durable, required minimum maintenance , all weather suitable Eco friendly and protective against UV rays. The flooring shall consist of following layers:- (i) 2 layer of resurfacer, (ii) 4 layer of rubber coat (iii) 1 layers of Anti-skid texture base coat color (iv) 1 layer of Acrylic Non-texture top coat paint (plane paint) (v) Finally marking of court as per ITF standards & specifications. Note:- A warranty of 3 Years shall be given by the manufacturer for cracks developement, any settlement or undulations, colour fade or any other issue that makes the play courts unsuitable for use.

S&F, in repairs, Tennis net pole 80mm X 80mm square or 80mm dia round of thickness 2.90mm or as relevant standard mild steel black pipe and finished with high quality PU paints with inside gear box system fixed in ground with cement concrete 1:2:4, type B-1,finished the surface even & smooth, all complete as specified and directed. Make:- Metco, Tugania, Herculan.

S&F Acrylic/Fibre glass basket ball board size 1800mmx1050mmx25mm thick Make -Metco/Bajaj/Hercules/Vinex including taking down old board, raising or lowering of pole height as per ground requirement and necessary repair as required at site complete all as directed.

S&F basket ball hoop or ring 450mm dia made from 5/8" dia solid steel rod including back plate/rim & basket complete all as specified & directed including taking out existing.

M&L for welding , in repairs, upto 10 Cm length and metal to be welded is upto 20mm thick and upto 15 metres height at any position for training assets, obstacles, doors, windows, fencing etc as directed including making good surfaces with required painting and necessary scafolding, ladders, supports for welding in height, all complete as specified and directed.

S & F of 1st class hard wood in scantling, clean sawn in any position and any description as in unframed work complete all as specified and directed.

S & F of 1st class hard wood in repairs, to replace old and decayed timber (including piecing, scarfing, etc., of old and new timbers if required) and removing defective portions to store in scantling, clean sawn in any position and any description as in unframed work complete all as specified and directed.

Dismantling timber scantling 40 Sqcm and over in section ( unframed work ) in any position.

M&L for Preparation of new or old wood or wood based materials of any description, or any girth and treated with creosote , upto 10 m height complete all as directed.

M&L for Preparation of old painted steel surfaces of any description, over 10 cm in width or girth and applying one coat of synthetic enamel paint with approved shade complete all as specified and directed upto 10.5 m height. Note :- Painting shall be carried out on old angle iron post , grill of security wall, posts of play courts etc.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m depth for foundation etc not exceeding 10 Sqm on plan and in any type of soil etc complete all as specified and directed

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

Brick work with sub class 'B' bricks (old size) straight or curved on plan exc 6.00m mean radius built in CM (1:6) complete all as specified and directed

M&L, for Brick work with sub class 'B' bricks (old size) straight or curved on plan exc 6.00m mean radius built in CM (1:6) but except bricks complete all as specified and directed.

M&L Brick work with sub class 'B' bricks (old size), straight or curved on plan to any radius in half brick thick wall built in CM (1:4) complete all as specified and directed.

Taking down cement plaster on brick or stone walling built in CM including raking out joints hacking for key scrubbing down with water etc complete as specified

M & L rendering 15mm thick on cement mortar 1:4 mixed with water proofing compound finished fair faces of brick/concrete surfaces even and smooth.WPC shall be measured and paid for separately.

Supply only liquid water proofing compound conform to relevant IS complete all as specified & directed

M&L, for PCC 1:2:4 type B1 (using 20 mm graded crushed stone aggregate) as in coping, benching, cills, PCC gola, holdfast and the like including weathering, slightly rounded or chamfered angles and throating, including necessary from work etc complete all as specified and directed.

M&L, for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mi- tred/stopped ends etc complete all as specified and directed.

M&L for PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in surface channels and drains complete all as specified and directed.

M & L, removing old damaged filling materials from joints of play courts, cleaning and forming constrction joint 30 mm deep x10 mm wide filled with sealing compound Grade A , including site clearance complete all as specified and directed.

M&L, for preparation of old painted cement concrete or plaster surfaces and painting lines, dashes, arrows and letters on pavements, play courts etc of any description not exceeding 10 cm width and girth and applying one coat of synthetic enamel paint complete all as directed.

Supplying and filling fine sand in existing pit of PT section trg assest under floors or in foundations including ramming, watering and consolidation (sand as approved by GE/ User).

M&L for cleaning and prepration of existing treated surface of tennis/basketball court and providing two layers of acrylic synthetic paint complete all as specified,directed and as approved.complete all as specified and directed

Dismantling fencing wire mesh, any type complete all as specified and directed.

Excavation in any type of soil for post holes (or similar holes) each not exceeding 0.50 Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance not exceeding 50 m and making good surface complete all as specified and directed.

M&L for PCC 1:3:6 type C-1 using 20mm graded stone aggregate as in surface channels and drains complete all as specified and directed.

Dismantling posts or struts (wood, steel or RCC) any section includin taking our embedded portion and making good disturbed ground (embedded in concrete, brick work, masonary etc)

S&F MS work as in fencing posts and struts in fencing including cutting tops to shape as directed,drilling holes,notching for wire etc,flat iron fillets(for securing wire mesh etc) including all necessary drilling,bolting or riveting etc and similar work confirming Fe-290 Gde E-165 to including embedding in concrete complete all as specified and directed.

S & F 4mm dia PVC Coated chain link Fencing of size specified by Engr-in-charge, made up into matresses or cages,lapped, wired and laid in position, including closing after filling complete all as specified and directed

S/F mild steel screw bolts (machine made) with hexagonal or square heads at one end and 'scraved the other to be fitted with washers and one hexagonal or square nut n.exc 5 cm long and dia 5 to 10 mm

Demolition of reinforced cement concrete of any discription and any position( ground to 4th floors) and removing the rubbish from the work site out side defence premises complete all as specified.

M&L for RCC M-20, nominal mix, type B-1 1:1.5:3 using 20mm graded crushed stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed.

M&L for MS round bars 10 mm dia and over cut to length, bent to shape reqd incl cranking bending etc and binding with MS wire (annealed) not less than 0.9 mm dia as in chain link fencing fixing

Use and waste form work to soffits of suspended slabs such as roof slabs, floor slabs landings and similar work, not exceeding 200mm thick (horizontal or sloping) for fair finished surfaces of concrete, complete all as specified and directed.

S&F Galvanized, 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of posts, straining bolts,standard bolt, including securing or tying at crossing with and including provision of galvanized mild steel wire staples or steel pins, etc complete all as specified and directed (Each line of wire to be measured for the purpose of payment).

M&L for preparation of new or previously untreated surfaces of steel of any description, over 10cm in width or girth and apply two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F Manually operated gear system suitable for straiightening & tightening of horizontal rope complete all as specified and directed.

M&L for Cast iron work grade FG150, unmachined,in brackets, gully traps,gratings,pulley,ralling,frames,manhole cover,fire and soot doors,dampers,stop valve boxes gate stops,part of ranges,balusters and similar articles n exc.5.00 kgs each

Demolition of cement concrete unreinforced in ground floor and paving n exc 15cm thick (below or above ground level) complete all as specified and directed.

M&L 75mm thick PCC 1:3:6 type C-2 using 40 mm graded crushed stone aggregate as in plinth protection or similar places, and finishing the surface even and smooth without using extra cement including making joints 12mm wide to the full depth of PCC at every 3 meters and at every change of direction and filling the same with sealing compound grade 'A' including necessary formwork etc complete all as specified and directed

Dismantling of existing depressed/sunk interlocking paver block of any thickness and shape, supply & spreading a layer of sand of required thickness and refixing the block in matching level of near by surface complete all as specified & directed.

M&L for Rubberised polished precast coloured cement concrete Interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 grade complete with & including 25mm thick sand cushioning layer including dismantling of existing damaged flooring etc complete, all as specified and directed.

M&L Rubberised polished heavy duty chequered cement concrete coloured tiles 30 cm X 30 cm X 25 mm thick, set, jointed & pointed in neat cement slurry in floor with grey cement & pigment to match the surface of tiles over screed bed of any description and in any position complete all as specified and directed.

M&L, Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required and dismantling of existing damaged kerb stone complete all as directed.

M&L for PCC 1:4:8 type D-2, (using 40 mm graded stone agg) as in foundation, filling, mass concrete and sub base of floor including demolition of existing old concrete complete all as specified and directed

M&L, for preparation of new or previously untreated concrete, brick, stone or plaster surfaces including kerb stone surface of any description over 10 cm width and girth and applying two coat of synthetic enamel paint over one coat of primer, complete all as directed.

Returning and filling in incl, spreading, levelling watering and well ramming in layers n.exc 25 cm

Removing excavated material n.exc 50 m and depositing where directed at a level n.exc 1.5m above the starting point

M&L for preparation of old or new wooden surfaces over 10 cm width or girth including rubbing with sand paper of different sizes, filler coat, including filling thinner with fine cloth and spirit lak dana polishing two or more coats up to desired finishing as directed by Engr-in-Charge all complete as specified and directed.

M&L for Preparation of old painted wooden surfaces and marking lines, dashes of any description not exceeding 10 cm width and girth with two or more coats of quick setting floor paint of approved shade on play courts all complete as directed.

Complete removing of existing treatment from concrete walls, complete all as specified and directed.

M&L for Preparation of plastered or scrapped surface of wall and applying 1.5mm thick Asian oil based wall care putty in two coats, as per manufacturer instructions, complete all as specified and directed.

M&L for Preparation of new plastered or puttied concrete wall surface over 10cm width or girth and apply two coats of synthetic enamel paint including primer one coat plaster coat complete all as directed.

M&L for Preparation of new plastered or puttied concrete wall surface over 10cm width or girth and apply one coat of plastic emulsion paint including priming paints plaster coat complete all as directed.

S&F 80mm thick Heavy duty Factory made Precast plain / perforated RCC M-30 drain cover slab reinforcement with 10 mm dia TMT bar of Fe- 500 grade and providing black painted set and jointed in cement mortar 1:4 complete all as specified and directed.

M&L for 15mm bore medium grade steel water tubing, galvanized (ISI Marked) with and including all fittings (ISI Marked) and jointed, tested and fixed complete to wall and ceiling or laid in floors etc complete including taking up or down existing steel tubing pipe complete all as directed.

M&L for 20mm bore medium grade steel water tubing, galvanized (ISI Marked) with and including all fittings (ISI Marked) and jointed, tested and fixed complete to wall and ceiling or laid in floors etc complete including taking up or down existing steel tubing pipe complete all as directed.

S&F Chromium plated Angle valve 15mm dia (angle cock) cast copper alloy fixed in repair complete all as directed

S&F 15mm dia pillar cock Super Delux with Aerator fixed in repair complete all as directed.

15mm bore long body bib tap with wall flange fixed in repair complete all as directed.

S&F in repair vitreous china wash down water closet pan (padestal pattern), white including plastic water closet seat cover, white, closed pattern flat bottom and mild steel chromium plated or aluminised hinging device.

S&F in repair, water closet vitreous china Squatting pan, Orissa pattern, size 580x440mm with integral foot rests, complete of approved make all as directed.

Supply only PVC low level flushing cistern 10 Ltr capacity symphonic action type white including ball valve, float valve and handle including bracket and PVC flush pipe fixed in repair complete all as directed. (Used for item No. 63 & 64 here-in-before)

S&F in repair Vitreous China wash basin, white, flat back, size 550x400 mm including 32mm CP waste coupling, waste pipe, fixing brackets complete all as specified & directed.

S&F in repair vitreous china Urinal “Star white” colour, flat back large Size 37.5 x 39 x 59cm to 61cm including waste coupling complete all as specified & directed.

S&F, Chromium plated Urinal spreader for urinals fixed in repair complete all as directed.

S&F Chromium Plated brass soap dish fixed in repair complete all as directed.

S&F 100mm dia chromium plated steel grating with/without hole fixed in repair complete all as directed.

S&F PVC (SWR) floor trap 100mm dia, plain with grating including jointing with solvent cement fixed in repair complete all as specified and directed.

S&F 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with MS clamp including taking down existing pipes complete all as directed.

S&F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with MS clamp including taking down existing pipes complete all as directed.

S&F PVC (SWR) bends in any radius 110mm bore in repairs complete all as specified and directed

S&F PVC (SWR) bends in any radius 75mm bore in repairs complete all as specifed and directed

Dismantling of water tank of capacity exc. 500 Ltr and not exc. 1000 Ltr complete all as specified and directed.

M&L for 1000 ltr capacity Rotational moulded polythylene water storage tanks three layered, ISI Marked (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified in SSR Part I including dismantling/ taking out of old water tank & removing to where directed complete all as specified and as directed.

M&L for Glazed ceramic coloured tiles of size 450x300 x 7mm , as on vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in white cement to match laid over and including 10mm thick rendring in CM 1:4 including 10 mm thick rendering in cement mortar 1:4 finished rough surface to receive tiles including dismantling of existing wall tiling including cement mortar bedding and removing rubbish off the premises complete all as directed.

M&L for Non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, laid in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with and including laying of 15 mm thick screed bed or bedding layer in CM 1:4 complete including dismantling of existing floor tiling including cement mortar bedding (but not backing) and rubbish off the premises all as directed.

Taking down chowkhats or frame with shutters (without taking off shutters from the frames) area n.exc 1.50 Sqm each complete all as specified & directed.

S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification &drawing

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails ms frame shall be covered with heat moulded plain colour PVC "C" channel having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail on either side as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement suppling & fixing in the frame at site as per specification & drawing in SSR Part II 2010 etc complete all as directed

S& F Butt hinges, 100mm long, medium weight, cold rolled, mild steel complete all as directed

S&F 100mm long aluminium anodized handle cast type complete all as directed.

S&F 150mm long aluminium anodized barrel tower bolt of extruded section complete all as directed.

M&L for PCC 1:2:4 type B-2 (using 40 mm graded crushed stone aggregates) as in hard standing 150 mm thick (125mm + 25mm with floor hardener as per manufacturer installation laid in panels and finished even and smooth without using extra cement using 38mm width PVC dividing strip,3 mm thick complete all as specified and directed. Note :- PVC plastic strip shall be measured and paid separately complete all as specified and directed.

Supply only metallic hardener in top layer of PCC floor as per manufacturer instruction complete all as specified and directed.

Cleaning and removing all scale and debris, etc from drain,underside the drain and from mouths of circulating pipes and removal of debris outside the IMA campus etc complete all as directed.

Refixing and tightening of toughened glass door/partition to the ground or wall with hinges/clamp support complete all as directed.

S&F 40 mm thick first class hard wood (teak wood) in flooring ,skirting planed on side with butt joints and fixed with nails in patches with and including 2 coats of cresoting on back side of wooden surface and two or more coat of french polishing on exposed surface complete all as specified & directed including dismantling existing timber scantling complete all as specified and directed.

Pragati Enterprises (BID ID -3360438)

M/S PUNDIR BUILDERS (BID ID -3361159)

Sharda Enterprises (BID ID -3360070)