Overall Development of Lokbhawan Shrine at Larkipora Anantnag B.W.O Electric work

PART A: Electrification of Mandir and Dharamshalla at Lokbhawan Larkipora.

Wiring for lighting points/fan points/exhaust fan points/call bell points with 2x1.5 sq mm FRLS PVC insulated flexible stranded copper conductor wires in recessed or surface medium class PVC conduit, with 240V 6A modular switch ,modular plate, suitable GI box and earthing the point with 1.5 sq mm FRLS PVC insulated copper conductor single core cable, etc. as required. (Havells/ Polycab/ Anchor/ Finolex/KEI/RR or equivalent make ) including the cost of conduit.

Wiring for light/power plug points (15/16A heating points) with 2x4 sq mm FRLS PVC insulated flexible stranded copper conductor wires in recessed or surface medium class PVC conduit along with 1x4 sq. mm FRLS PVC insulated copper conductor single core cable for earthing, etc. as required.(Havells/ Polycab/ Anchor/ Finolex/KEI/RR or equivalent ) including the cost of conduit.

Wiring for 5- 10A socket out lets for computer (inverter) with 2X2.5 sq. mm FRLS PVC insulated copper conductor (Havell/Polycab/ Fenolex/Anchor/ equivalent as directed by engineer incharge.) single core cable in surface/recessed medium class PVC conduit, alongwith 1 No. 2.5 sq. mm FRLS PVC insulated copper conductor single core cable for earthing etc. as required.including the cost of conduit.

Supplying and fixing of GI box along with modular base and cover plate for modular sockets, switches in recess etc as required 6 module (200mm x 75mm)

Supplying and fixing of 5pin 5-10A socket and 5-10A switch on existing modular plate, incl connections etc as required. (Havells/SSK/Anchor/ABB/Schneider)

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch connections etc. as required.( Anchor roma plus/Legrand Mylinc /SSK/Schneider Zencelo /Crabtree athena make).

Supplying and fixing of indicators on existing modular plate and switch box , incl. connections, etc. as required. (Havells/ SSK/ Anchor/ ABB/Schneider or equivalent).

Supplying and fixing modular blanking plate on the existing modular plate switch box excluding modular plate as recquired.

Supply, Installation, Testing and Commissioning of 18 Watt/+ LED recessed/mounted (round or square) Down lighters having aluminum body, minimum 100lm/w, average life 50000 hours, Operating temperature -10°C to +45°C.Certification:- LM79 & LM80 test report should be from govt approved In-house NABL lab/ government of India.The job includes replacement warranty of fixture if damaged/ burnt out what so ever reason for a period of two years reckoned from the date of successful commissioning/ handing over of site to the intending department. (Havells/ Philips/ Crompton/ Jaguar/Wipro).

S/F testing and comm. of Wall mounted LED Batten 25W+ commercial series (cool/warm) 4 ft. with minimum system lumen efficacy of 100 lm/W with Pressure Die cast Aluminium Heat Sink and P.F.>0.95 ,THD<10% ,CCT 5700K, CRI 80.The LED with Useful life of 50000 Hrs at L70, seperate driver, heat sink, earthing provision.. The Input voltage range shall be 150V to 270V .The Fixture should have In-built Surge Protection of 2kV. Certification:- LM79 & LM80 test report should be from govt approved In-house NABL lab/ government of India.Philips/ Havells /Wipro make. sample to be approved before installation.

Supply, Installation, Testing and Commissioning of 50W (Havells/ PhillIps/Wipro skyline ) new generation energy saving and environmental friendly long life L.E.D Flood Light made up of pressure die cast Aluminum housing with high efficiency LEDs as lighting source with efficacy >110lm/w ,CRI>80 ,CCT>5000 ,Avg Life L70 50000 hours ,No haremful UV and IR radiators, Operating Temp -10 to 45C ,Surge Voltage Protection, IP66 Protection and impact resistance of IK07.The job includes replacement warranty of fixture if damaged/ burnt out what so ever reason for a period of two years reckoned from the date of successful commissioning/ handing over of site to the intending department.Certification:- LM79 & LM80 test report should be from govt approved In-house NABL lab/ government of India.

Supply, installation, testing and commissioning of 400 mm wall mounted fan ,3 star BEE star rated, 40-50W,3 no.of blades , 1300-1600 rpm,AC 230V 50Hz, high Quality Copper Motor with double ball bearing incl. 1N Downrod,Shackle Assembly, cost of ceiling rose (if required) and making of necessary connections.The job includes replacement warranty of fixture if damaged/burn out what so ever reason for a period of two years reckoned from the date of sucessful commissioning / handing over of site to the intending department.(To be got approved before installation from EIC).Bajaj/ V Guard / Havells .

Supply, Installation, Testing and Comm. of 200-250mm sweep exhaust fan Shutter type of havell /Bajaj/ Crompton/equivalent make as directed by engineer incharge,Air Flow capacity >850cmph, 35-50Watts,Noise level 44db, 1200 rpm,water resistant, including making of space in wall/ window as per site requirement and necessary connections.The job includes replacement warranty of fixture if damaged/burn out what so ever reason for a period of two years reckoned from the date of sucessful commissioning / handing over of site to the intending department.(To be got approved before installation from EIC)

Supply and fixing of 8 way (4+24), Double door surface/ recess mounting, Horizontal type, 240 V, SP&N MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs, excluding cost of MCBs and Incomer. (Havells/Legrand/SSK/Schnider/ABB)

Supply, installation, testing and commissloning of 5-32A single pole rating 240/415V, 10 KA "C" curve MCB of Legrand/ Havells/ L&T suitable for inductive load in the MCB distribution board complete with necessary connections.

Supply, installation, testing and commissioning of 32-40A DP rating 240/415V,10 KA "C" curve MCB of Legrand/ Havells/L&T suitable for inductive load in the MCB distribution board complete with necessary connections.

Supply, installation, testing and commissioning of 63A DP rating 240/415V,10 KA "C" curve MCB of Legrand/ Havells/L&T suitable for inductive load in the MCB distribution board complete with necessary connections.

Supply, installation, testing and commissioning of 100A DP rating 240/415V,10 KA "C" curve MCB of Legrand/ Havells/L&T suitable for inductive load in the MCB distribution board complete with necessary connections.

Supply and fixing of single pole blanking plates on existing MCB distribution boards.

Earthing with Gl earth pipe 4.5 mtr. Long 40 mm dia. Including accessorles and providing masonry enclosure with cover plate having locking arrangements and watering pipe, trenching and filling with charcoal/coke and salt.

Providing and fixing of 25mmx5mm Gl strip on surface or in recess for extending the earthing from earth electrode to controlling panel in one rim to be laid through required dia. of PVC conduit.

Supply, laying, connecting and commissioning of 35 sq mm 2 core XLPE/ PVC Insulated and steel armored 1.1 KV grade Aluminum LT cable for Service line, incl. cost of required al. thimbles duly crimped. (Over head/ under ground).

DHARAMSHALA

Wiring for lighting points/fan points/exhaust fan points/call bell points with 2x1.5 sq mm FRLS PVC insulated flexible stranded copper conductor wires in recessed or surface medium class PVC conduit, with 240V 6A modular switch ,modular plate, suitable GI box and earthing the point with 1.5 sq mm FRLS PVC insulated copper conductor single core cable, etc. as required. (Havells/ Polycab/ Anchor/ Finolex/KEI/RR or equivalent make ) including the cost of conduit.

Wiring for light/power plug points (15/16A heating points) with 2x4 sq mm FRLS PVC insulated flexible stranded copper conductor wires in recessed or surface medium class PVC conduit along with 1x4 sq. mm FRLS PVC insulated copper conductor single core cable for earthing, etc. as required.(Havells/ Polycab/ Anchor/ Finolex/KEI/RR or equivalent ) including the cost of conduit.

Wiring for 5- 10A socket out lets for computer (inverter) with 2X2.5 sq. mm FRLS PVC insulated copper conductor (Havell/Polycab/ Fenolex/Anchor/ equivalent as directed by engineer incharge.) single core cable in surface/recessed medium class PVC conduit, alongwith 1 No. 2.5 sq. mm FRLS PVC insulated copper conductor single core cable for earthing etc. as required.including the cost of conduit.

Supplying and fixing of GI box along with modular base and cover plate for modular sockets, switches in recess etc as required 6 module (200mm x 75mm)

Supplying and fixing of 5pin 5-10A socket and 5-10A switch on existing modular plate, incl connections etc as required. (Havells/SSK/Anchor/ABB/Schneider)

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch connections etc. as required.( Anchor roma plus/Legrand Mylinc /SSK/Schneider Zencelo /Crabtree athena make).

Supplying and fixing of indicators on existing modular plate and switch box , incl. connections, etc. as required. (Havells/ SSK/ Anchor/ ABB/Schneider or equivalent).

Supplying and fixing modular blanking plate on the existing modular plate switch box excluding modular plate as recquired.

Supply, Installation, Testing and Commissioning of 18 Watt/+ LED recessed/mounted (round or square) Down lighters having aluminum body, minimum 100lm/w, average life 50000 hours, Operating temperature -10°C to +45°C.Certification:- LM79 & LM80 test report should be from govt approved In-house NABL lab/ government of India.The job includes replacement warranty of fixture if damaged/ burnt out what so ever reason for a period of two years reckoned from the date of successful commissioning/ handing over of site to the intending department. (Havells/ Philips/ Crompton/ Jaguar/Wipro).

Supply, Installation, Testing and Commissioning of 50W (Havells/ PhillIps/Wipro skyline ) new generation energy saving and environmental friendly long life L.E.D Flood Light made up of pressure die cast Aluminum housing with high efficiency LEDs as lighting source with efficacy >110lm/w ,CRI>80 ,CCT>5000 ,Avg Life L70 50000 hours ,No haremful UV and IR radiators, Operating Temp -10 to 45C ,Surge Voltage Protection, IP66 Protection and impact resistance of IK07.The job includes replacement warranty of fixture if damaged/ burnt out what so ever reason for a period of two years reckoned from the date of successful commissioning/ handing over of site to the intending department.Certification:- LM79 & LM80 test report should be from govt approved In-house NABL lab/ government of India.

Supply, Installation, Testing and Commissioning of 1200 mm sweep ceiling fan with 3 No. Aluminium blades, 30 cm long down rod, 2nos. canopies, shackle kit, Power Factor not less than 0.9, Service Value including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, and including iron hook complete as directed by engineer incharge.

Supply, Installation, Testing and Comm. Of 200-250mm sweep exhaust fan Shutter type of havell /Bajaj/ Crompton/equivalent make as directed by engineer incharge,Air Flow capacity >850cmph, 35-50Watts,Noise level 44db, 1200 rpm,water resistant, including making of space in wall/ window as per site requirement and necessary connections.The job includes replacement warranty of fixture if damaged/burn out what so ever reason for a period of two years reckoned from the date of sucessful commissioning / handing over of site to the intending department.(To be got approved before installation from EIC)

Supply and fixing of 8 way (4+24), Double door surface/ recess mounting, Horizontal type, 240 V, SP&N MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs, excluding cost of MCBs and Incomer. (Havells/Legrand/SSK/Schnider/ABB)

Supply, installation, testing and commissloning of 5-32A single pole rating 240/415V, 10 KA "C" curve MCB of Legrand/ Havells/ L&T suitable for inductive load in the MCB distribution board complete with necessary connections.

Supply, installation, testing and commissioning of 32-40A DP rating 240/415V,10 KA "C" curve MCB of Legrand/ Havells/L&T suitable for inductive load in the MCB distribution board complete with necessary connections.

Supply, installation, testing and commissioning of 63A DP rating 240/415V,10 KA "C" curve MCB of Legrand/ Havells/L&T suitable for inductive load in the MCB distribution board complete with necessary connections.

Supply and fixing of single pole blanking plates on existing MCB distribution boards.

Main Panel

Design, Fabrication, Supplying, Installation, Testing and Commissioning of following panel, duly manufactured from CPRI approved manufacturer, made out of 2mm thick M.S. sheet steel , floor/wall mounted, vermin and dust proof, indoor type with suitable size of angle iron legs for grouting in the ground, with lockable type hinged doors, duly painted with provision for fixing of following switch gears, , Aluminium Bus Bar of various ratings after taking Derating factor into account, and other allied accessories etc. as required. (As per approved design,size may vary as per site requirement)

Providing and fixing of following protection equipments and other allied accessories including connections, inter connections, with suitable size of PVC insulated copper conductor cable including earthing etc. as required.

1. Normal INCOMING:

a)125A DP MCB 10 KA Legrand/ Schinider/ABB/L&T sample to be approved before installation..

b) 4 No. of Aluminium Bus Bar of 300 Amp.

c) 100A DP change over switch

d) Digital meters and phase indicators -1 set.

3.INVERTER

a) 32A DP MCB 10KA

b) Digital meter and phase indicators 01 set.

Wiring for Circuit/Sub mains along with earth wire in FRLS PVC insulated 660/1100 volt grade flexible stranded copper conductor wires in recessed or surface conduiting system, including the cost of conduit. (Havells/ Polycab/ Finolex/ Anchor/KEI/RR or equivalent).

2x10 sq mm +1x6 sq mm Heating submain

2x 6 sq mm + 1x 6 sq mm Inverter Lighting submain

2x 4 sq mm + 1x 4 sq mm Lighting submain

2x 2.5 sq mm + 1x 2.5 sq mm Lighting circuit

Earthing with Gl earth pipe 4.5 mtr. Long 40 mm dia. Including accessorles and providing masonry enclosure with cover plate having locking arrangements and watering pipe, trenching and filling with charcoal/coke and salt.

Providing and fixing of 25mmx5mm Gl strip on surface or in recess for extending the earthing from earth electrode to controlling panel in one rim to be laid through required dia. of PVC conduit.

Supply, laying, connecting and commissioning of 50 sq mm 2 core XLPE/ PVC Insulated and steel armored 1.1 KV grade Aluminum LT cable for Service line, incl. cost of required al. thimbles duly crimped. (Over head/ under ground).

PART B: Illumination of Temple at Larkipora

Supply and erection of Mild Steel Swaged Tubular Pole confirming to IS: 2713-1980 ( Part I-II) with base plate. The pole shall be made from steel tube and pipe (IS : 1141, Fe 410)including excavation of the pit and filling up the same with cement concrete of M15 Grade (1: 2: 4 mix)from base plate to 50 cm above ground level, earthing terminal, cable entry with 32mm dia B- class GI cable sleeves. The pole shall be painted with 2 coats of red oxide primer and 2 coats of enamel paint of silver. The job also includes the cost of form work and carriage of all required materials. (9 mtr. 410 SP-28).

Providing and fixing of detachable type round or square bracket (suitable for 4 lights) of 32/35 mm dia. GI pipe as per requirement.

Providing & Fixing of 120W IKO8 IP-66 protected high power LED flood light system with single piece Pressure diecast aluminum housing, toughened glass diffuser with suitable lenses on LED to achieve various beam angles, of high power LED of 3 to S watt each. Integrated potted driver as a unique BIS R number having more than 85 % and in compliance to BIS certified and Trade mark certificate. [he System level Luminary efficacy >=1 wt. LED driver Input Voltage AC 120 to 270 V AC with High voltage Cutoff V AC an uto resetting Safety Power Factor >0.95, THD(I) <10%, driver current) <=750mA. driver should be Phase to phase protection of 440 V for 4 Hrs.Electrical Connector, Surge Protection Min >24KV internal and 10KV external but inside driver compartment, System life of 50000 Burning hours with 70% of Initial Lumens maintained, CRI>70 and CCT 5700k $355K. Manufactures Word Mark/Name Engraved/Embossing/Screen printing on die cast housing to allow traceability/ authenticity. Fixture shall be IS 10322 Complianced.OEM Must have its own in house NABI lab setup for all testing facilities for LED fixtures. (LM79/LM80) Certificate/ report with liable warranty of product/accessories from.OEM shall be submitted. (120Watt)

S/L, testing and commissioning of, 16 sq. mm 2 core XLPE Insulated, PVC aluminum armored cable 650 V/1100 V Grade as per IS 7098 (Part 1) 1988 with upto Date Amendments. Havells or Eq. standard make as directed by engineer Incharge and making end termination with brass compression gland and aluminum lugs of reqd size.

Supplying and laying of DWC HDPE (Double Wall Corrugated High Density Polyethylene) pipe, 50 mm dia. ISI marked along with all accessories like sockets, bends, couplers, etc. with fitting and cutting, jointing, etc. (under ground), including excavation and refilling the trench after laying the pipes.(complete job)

Supply, installation, testing and commissioning of floor mounted compartmentalized , outdoor type main distribution panels, fabricated out of 16 gauge sheet steel,water proof, dust protected, painted, incl. earth terminal with all necessary accessories with internal wiring as required. The panel is to be provided with the following adjustable type controlling/ protection switch gear devices: 1.NORMAL INCOMING 100A DP MCB 10KA 01 No. 200A SP&N bus bar AL 2 Strips Digital meter and phase indicators 01 set. Timer Switch OUTGOING 100A DP MCB 10KA 01 No. 200A SP&N bus bar AL. 2 Strips The panel should have a compartmental space for housing a 4 KVA voltage stabilizer. The job also includes the cost of providing and laying of cement concrete block of M15 grade. (2`-0” x 3`-0” x 1`-6”) The job also includes the cost of form work and carriages of all required materials.

Supplying and drawing FRLS PVC insulated copper conductor single core cable through pole up to light.

2 x 2.5 sq. mm + 1 x 2.5 sq.mm

Providing and fixing/ laying of earthing station by way of placing GI electrode rod/ pipe in a pit , connected through GI strip. (complete job)

Providing and fixing of IP 65 proct impact resistant polycarbonate enclosure box with knock out for cable entry /out including fixing with nut bolt fastner etc required complete in all respect of following size along with 63 A connector and 3 no. 6A MCB for controlling the High Mast Lights. 250 x 200 x 115 mm

Supply, installation , testing and commissioning of 4 KVA relay type voltage stabilizer operating from input voltage 90-260Volt thereby producing output voltage of 230volts +_ 3%.

Providing of chemical earthing as per IS standards by way of digging 8 feet pit then embedding 3 mtr. Long GI earthing electrode, 80 mm dia. Connecting the plate with main control board by 10 SWG Copper wire with 1/2” dia. Full thread brass nut and bolts and washers, refilling the pit with chemical compound.