Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹1.9 L
EMD Value
₹4,733
Closing Date
14 Feb 2025, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Assistant Engineer
Office of Assistant Engineer LID EW section Upputhara GP
Drinking Water Scheme for Annikuzhi
2025_LSGD_735356_5
06/2024/AE/LID EW/UPA
Open Tender
Civil Works - Water Works
Item Rate
Upputhara GP
Please refer Tender documents.
9 documents required · 9 mandatory
₹555
₹4,733
14 Mar 2025
7 Feb 2025
15 Feb 2025
7 Feb 2025
14 Feb 2025
7 Feb 2025
Amount
Drinking water Scheme
OD403125/2024-2025:SUPPLY AND FIXING THREE CORE FLAT CABLE 4sqmm
OD416559/2024-2025:Supplying and fixing 7.50 HP submersible pump set including all Labour charges for fitting and coveyance.
OD418702/2024-2025:Supplying and fixing Pump Starter for 7.5 HP Motor Pump set
OD403142/2024-2025: Supplying and fixing tuff rope 14 mm including all labour charges and cost etc
OD403149/2024-2025:Supplying and fixing 40mm dia 10kg/cm2 HDPE pipe PE-80 including specials and all fitting charges but excluding trenching and refilling etc complete
OD407433/2024-2025:Supplying and fixing electrical panel board suitable electrical fittings (ELCB) including all labour charges
2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil
OD403249/2024-2025:DRY RUBBLE MASONRY _ Dry rubble without concrete levelling course masonry with good quality blasted rubble including packing to compactness to lines and levels cost and conveyance of all materials labour charges etc. complete as per direction of Departmental officers at site
OD403307/2024-2025:Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with: Cement mortar 1:6 (1 cement : 6 coarse sand)
5.1.3:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
50.6.2.2:Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete
OD403408/2024-2025:Supplying and Fabricating 25mm thick factory made solid panel PVC door with frame : locally available best quality including cost of all fittings labour charge etc . complete
13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes
OD403507/2024-2025:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coated thickness with zinc coating in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
OD403514/2024-2025:Supplying and fixing name board of granite plaque of size 75*60 cm installed in the appropriate place visible to the public and engraving letters etc. complete as per the direction of departmental officers.
MOHANAN T (BID ID -2106629)
Bidder Name
M J BINU
MOHANAN T
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .