Supply and laying of UG cale and providing cable tray from VQC-1 entrance to ATC substation for re-aligning existing cables in ESD-West,Tirumala

Supply and transportation of 185 Sq.mm 3 1/2 core LT XLPE insulated, 1100V grade armoured Aluminium UG cable as per specification confirming to IS:7098 (Part-I) /1554-1. Grade-A: Make: Torent / Universal / Unistar / Havells / KEI / Gloster / Polycab / RR Kabel / Finolex.

Supply and transportation of 150 Sq.mm 3 1/2 core LT XLPE insulated, 1100V grade armoured Aluminium UG cable as per specification confirming to IS:7098 (Part-I) /1554-1. Grade-A: Make: Torent / Universal / Unistar / Havells / KEI / Gloster / Polycab / RR Kabel / Finolex.

Supply and transportation of 50 Sq.mm 3 1/2 core LT XLPE insulated, 1100V grade armoured Aluminium UG cable as per specification confirming to IS:7098 (Part-I) / 1554-1. Grade-A: Make: Torent / Universal / Unistar / Havells / KEI / Gloster / Polycab / RR Kabel / Finolex.

Laying of U.G cables up to 50 Sq.mm through existing G.I.Pipe / HDPE and back filling of trench including labour charges etc., complete.(Excluding the cost of G.I / HDPE Pipe)

Laying of U.G cables from 70 Sq,mm to 150 Sq.mm through existing G.I.Pipe/HDPE pipe and back filling of trench including labour charges etc.,complete.(Excluding the cost of G.I Pipe/ HDPE pipe)

Laying of U.G cables from 185 Sq,mm to 400 Sq.mm through existing G.I.Pipe and back filling of trench including labour charges etc.,complete.(Excluding the cost of G.I / HDPE Pipe)

Only Laying of U.G cables upto 50 Sq,mm in existing cable tray/ Existing MS flat etc., complete.

Only Laying of U.G cables size from 70 Sq,mm to 150 sq.mm in existging cable tray / Existing MS flat etc.,complete.

Only Laying of U.G cables size from 185 Sq,mm to 400 sq.mm in existing cable tray/ Existing MS flat etc., complete.

Earth Work excavation for trench for laying of U.G. Cable in ordinary Soils, manual means to the required width and depth and depositing the same on bank as directed during execution etc., complete

Cutting open cement concrete road

Cement concrete using 20mm HBG metal in CC (1:3:6) laid in Layers of not more than 15cms thick well compacted including curing cost and conveyance of materials etc., complete

Plastering in CM (1:6) with 12mm thick using river sand including curing, conveyance of materials etc.

Supply and making end termination with heavy Alluminium lugs (pin / ring type) for 185 Sq.mm cable as per IS specification duly crimped with crimping tool, PVC tape etc., complete. Make: Dowels / Jainson / Comet.

Supply and making end termination with heavy Alluminium lugs (pin / ring type) for 150 Sq.mm cable as per IS specification duly crimped with crimping tool, PVC tape etc., complete. Make: Dowels / Jainson / Comet.

Supply and making end termination with heavy Alluminium lugs (pin / ring type) for 95 Sq.mm cable as per IS specification duly crimped with crimping tool, PVC tape etc., complete. Make: Dowels / Jainson / Comet.

Supply and making end termination with heavy Alluminium lugs (pin / ring type) for 70 Sq.mm cable as per IS specification duly crimped with crimping tool, PVC tape etc., complete. Make: Dowels / Jainson / Comet

Supply and making end termination with heavy Alluminium lugs (pin / ring type) for 50 Sq.mm cable as per IS specification duly crimped with crimping tool, PVC tape etc., complete. Make: Dowels / Jainson / Comet.

Supply and making end termination with heavy Alluminium lugs (pin / ring type) for 25 Sq.mm cable as per IS specification duly crimped with crimping tool, PVC tape etc., complete. Make: Dowels / Jainson / Comet.

Supply & Making heat shrinkable outdoor straight through joint for 3.5 core 25 / 35 / 50 Sq.mm size of PVC / XLPE insulated aluminium conductor cable of 1.1 KV grade including cost of compound, sleeves etc., as required. Make: Raychem / M seal / Denson / Multy /Transeal- Hongshang

Supply & Making heat shrinkable outdoor straight through joint for 3.5 core 150 / 185 / 240 Sq.mm size of PVC / XLPE insulated aluminium conductor cable of 1.1 KV grade including cost of compound, sleeves etc., as required. Make: Raychem / M seal / Denson / Multy / Transeal- Hongshang

Supply Laying and Transportation of Outer dia 50mm and inner dia 38mm, 6Kg/Sq.Cm (PE- 100 grade) double walled corrugated HDPE duct made as per specification BSEN - 500 86/IS 14930 Part-II. Make: DURA LINE (Dura Guard) or its equivalent make.

Supply Laying and Transportation of Outer dia 78mm and inner dia 63mm, 6Kg/Sq.Cm (PE- 100 grade) double walled corrugated HDPE duct made as per specification BSEN - 500 86/IS 14930 Part-II. Make: DURA LINE (Dura Guard) or its equivalent make.

Supply, transportation & installation of following sizes of Hot Dipped Galvanized Iron ladder type cable trays with rungs at span of 250 mm including horizontal and vertical bends, reducers tees, cross members and other accessories as required and duly suspended from the ceiling/wall with suspenders and etc., complete

300mm x 50mm x 2.0mm

150mm x 50mm x 2.0mm

Only erection of 6 to 8 meters length of given Steel Tubular Pole in an earth pit of size 2' x 2' x 5' and concreting in C.C. 1:3:6 with 40mm HBG Crushed metal to full width over bed concrete(6") to a height of 4 ½'' (up to ground level) in all soils and filled with sand to a height of 6" and base concreting with C.C (1:3:6) using 40mm HBG Crushed Metal for full width and up to ground level over concrete bed of 6" height and coping should be done to a height of 2 1/2' with round/square/hexagonal shape using 20mm HBG Crushed metal in C.C. (1:3:6) and plastering neatly with 12mm thick in C.M (1:5).

The Pole has to be painted with 2 coats of enamel paint from coping to a height of 1.00 mtr and painting the remaining pole with 2 coats of Aluminum paint over one coat of red oxide paint as directed during execution. (Poles will be supplied departmentally and conveyance by the Contractor at his cost from Stores to Site).

Supplying and fixing in position M.S. Ornamental grills for windows and ventilators or for veranda openings using M.S. flats, Square rods, angles, sheets etc, of approved design including necessary cuttings, bending fabrication, welding, grinding and finishing smooth including painting the grills/channels/angles with two coats with synthetic enamel paint Gr.-I over a primary coat (Red oxide metal primer) (total three coats) of approved make and colour including cost of making the holes into RCC or masonry works and making good the same wherever necessary, including cost and conveyance of all materials incidental charges etc, complete.

Dismantling of existing U.G cables upto 50 Sq,mm and back filling of trench including labour charges etc., complete.

Dismantling of existing U.G cables size from 70 Sq,mm to 150 sq.mm and back filling of trench including labour charges etc.,complete.

Dismantling of existing U.G cables size from 185 Sq,mm to 400 sq.mm and back filling of trench including labour charges etc.,complete.

Fabrication, supply and transportation of all sizes swaged poles up to site confirming to IS 2713 / 1980 specifications. The pole should be painted with primary coat of red oxide and black bituminous paint up to ground level with base plate, including cost of all materials etc., complete.(Rate per K. G) 410 SP.6 for 7.5 mtrs. length of pole Planting depth in Mtrs. -1.25 Length of section in mtrs. : Bottom-4.50, Middle-1.50, Top-1.50 O.D & Thickness in mm : Bottom-114.5 x 5.4, Middle-88.9 x 4.85, Top- 76.1 x 3.25 Weight in Kg: Weight of pole - 93 Kg., Weight of base plate -5 Kg. (300 x 300 x 6mm) Total Weight - 98 Kg. Makes: Bajaj / Volmont / Transrail / utkarsh / Skipper / Laasma

Providing earthing as per IS 3043/ 1987 with 100mm (ID), 13mm thick C.I. Pipe of 3.0 mtr. length after excavating an earth pit of size1.5 m X 0.9 M X 3.00M(Top 1.50 m X 1.20 m X 0.9m & bottom 1.20 M X 1.20 M X 1.65 M) and filling with a homogenous layer of 40 Kgs. of Coke / Char Coal, 20 Kgs. of Salt and the required quantity of sand around 100mm pipe from the bottom of the pipe to a height of 2.7mtr. and filling the remaining excavated portion with earth and consolidation / Settlement of the trench should be done by filling with sufficient quantity of water

A concrete bed of size 0.8 M X 0.8 M X 0.1 M thick and an inspection chamber having inside measurements of 0.4 M X0.4 M X 0.4 M with wall thickness of 100 mm with cement concrete CC (1:2.5:5) using 20 mm HBG Metal is to be constructed with side wall 100 mm above ground level and plastering the exposed walls neatly with CM (1:3) with 12 mm thick. The Top of the Inspection Chamber is to be provided with reinforced precasted RCC Slab with 40mm thick with lifting hook. The top of C.I. Pipe is to be fixed & welded with suitable G.I. Wire mesh funnel 50mm x 6mm G.I. Strip having length of 300mm is to be fixed to the top of C.I. Pipe with G.I. Clamps fabricated with 50 x 3mm G.I. Flats with necessary bolts and nuts and necessary welding to be done to the clamps and C.I. Pipe.

2 Nos. of holes are to be drilled on either side of G.I. Flat for Extending earth connections. 65mm dia PVC Pipe is to be embedded at the pit entry for earth. After laying earth from earth conductor bus to Electrode trough PVC Pipe, the surface should be covered with bitumen and grease. The cost of GI/Copper flat to be run from CI Pipe electrode to the equipment is to be made separately on running meter basis. The work shall be executed strictly as per IS 3043 - 1987. The rate includes cost and conveyance of all materials, labour charges, incidental charges etc., complete (Note:- Necessary meggaring testing is to be carried out in the presence of concerned Engineers and measurement of resistance shall be as per ISI standards).

Supply and run of ' 8 ' SWG G.I wire for earth electrode to required places by Surface in walls, flooring including cost of all accessories and giving necessary connection with 3/8"x2" GI Bolts, Nuts and Washers wherever joints has to be done. The strip has to be either rivited (or) bolted (or) gas welding neatly and all labour charges etc., complete.

NOTE (i)The rates are of basic rates excluding GST. (ii) The applicable GST will be reimbursed/paid as per actuals on production of proof. (iii)Statutory deductions will be made as per norms, if applicable. Any modalities imposed on GST by the Government from time to time, the same will be implemented.

Supply and transportation of 185 Sq.mm 3 1/2 core LT XLPE insulated, 1100V grade armoured Aluminium UG cable as per specification confirming to IS:7098 (Part-I) /1554-1. Grade-A: Make: Torent / Universal / Unistar / Havells / KEI / Gloster / Polycab / RR Kabel / Finolex.

Supply and transportation of 150 Sq.mm 3 1/2 core LT XLPE insulated, 1100V grade armoured Aluminium UG cable as per specification confirming to IS:7098 (Part-I) /1554-1. Grade-A: Make: Torent / Universal / Unistar / Havells / KEI / Gloster / Polycab / RR Kabel / Finolex.

Supply and transportation of 50 Sq.mm 3 1/2 core LT XLPE insulated, 1100V grade armoured Aluminium UG cable as per specification confirming to IS:7098 (Part-I) / 1554-1. Grade-A: Make: Torent / Universal / Unistar / Havells / KEI / Gloster / Polycab / RR Kabel / Finolex.

Laying of U.G cables up to 50 Sq.mm through existing G.I.Pipe / HDPE and back filling of trench including labour charges etc., complete.(Excluding the cost of G.I / HDPE Pipe)

Laying of U.G cables from 70 Sq,mm to 150 Sq.mm through existing G.I.Pipe/HDPE pipe and back filling of trench including labour charges etc.,complete.(Excluding the cost of G.I Pipe/ HDPE pipe)

Laying of U.G cables from 185 Sq,mm to 400 Sq.mm through existing G.I.Pipe and back filling of trench including labour charges etc.,complete.(Excluding the cost of G.I / HDPE Pipe)

Only Laying of U.G cables upto 50 Sq,mm in existing cable tray/ Existing MS flat etc., complete.

Only Laying of U.G cables size from 70 Sq,mm to 150 sq.mm in existging cable tray / Existing MS flat etc.,complete.

Only Laying of U.G cables size from 185 Sq,mm to 400 sq.mm in existing cable tray/ Existing MS flat etc., complete.

Earth Work excavation for trench for laying of U.G. Cable in ordinary Soils, manual means to the required width and depth and depositing the same on bank as directed during execution etc., complete

Cutting open cement concrete road

Cement concrete using 20mm HBG metal in CC (1:3:6) laid in Layers of not more than 15cms thick well compacted including curing cost and conveyance of materials etc., complete

Plastering in CM (1:6) with 12mm thick using river sand including curing, conveyance of materials etc.

Supply and making end termination with heavy Alluminium lugs (pin / ring type) for 185 Sq.mm cable as per IS specification duly crimped with crimping tool, PVC tape etc., complete. Make: Dowels / Jainson / Comet.

Supply and making end termination with heavy Alluminium lugs (pin / ring type) for 150 Sq.mm cable as per IS specification duly crimped with crimping tool, PVC tape etc., complete. Make: Dowels / Jainson / Comet.

Supply and making end termination with heavy Alluminium lugs (pin / ring type) for 95 Sq.mm cable as per IS specification duly crimped with crimping tool, PVC tape etc., complete. Make: Dowels / Jainson / Comet.

Supply and making end termination with heavy Alluminium lugs (pin / ring type) for 70 Sq.mm cable as per IS specification duly crimped with crimping tool, PVC tape etc., complete. Make: Dowels / Jainson / Comet

Supply and making end termination with heavy Alluminium lugs (pin / ring type) for 50 Sq.mm cable as per IS specification duly crimped with crimping tool, PVC tape etc., complete. Make: Dowels / Jainson / Comet.

Supply and making end termination with heavy Alluminium lugs (pin / ring type) for 25 Sq.mm cable as per IS specification duly crimped with crimping tool, PVC tape etc., complete. Make: Dowels / Jainson / Comet.

Supply & Making heat shrinkable outdoor straight through joint for 3.5 core 25 / 35 / 50 Sq.mm size of PVC / XLPE insulated aluminium conductor cable of 1.1 KV grade including cost of compound, sleeves etc., as required. Make: Raychem / M seal / Denson / Multy /Transeal- Hongshang

Supply & Making heat shrinkable outdoor straight through joint for 3.5 core 150 / 185 / 240 Sq.mm size of PVC / XLPE insulated aluminium conductor cable of 1.1 KV grade including cost of compound, sleeves etc., as required. Make: Raychem / M seal / Denson / Multy / Transeal- Hongshang

Supply Laying and Transportation of Outer dia 50mm and inner dia 38mm, 6Kg/Sq.Cm (PE- 100 grade) double walled corrugated HDPE duct made as per specification BSEN - 500 86/IS 14930 Part-II. Make: DURA LINE (Dura Guard) or its equivalent make.

Supply Laying and Transportation of Outer dia 78mm and inner dia 63mm, 6Kg/Sq.Cm (PE- 100 grade) double walled corrugated HDPE duct made as per specification BSEN - 500 86/IS 14930 Part-II. Make: DURA LINE (Dura Guard) or its equivalent make.

Supply, transportation & installation of following sizes of Hot Dipped Galvanized Iron ladder type cable trays with rungs at span of 250 mm including horizontal and vertical bends, reducers tees, cross members and other accessories as required and duly suspended from the ceiling/wall with suspenders and etc., complete

300mm x 50mm x 2.0mm

150mm x 50mm x 2.0mm

Only erection of 6 to 8 meters length of given Steel Tubular Pole in an earth pit of size 2' x 2' x 5' and concreting in C.C. 1:3:6 with 40mm HBG Crushed metal to full width over bed concrete(6") to a height of 4 ½'' (up to ground level) in all soils and filled with sand to a height of 6" and base concreting with C.C (1:3:6) using 40mm HBG Crushed Metal for full width and up to ground level over concrete bed of 6" height and coping should be done to a height of 2 1/2' with round/square/hexagonal shape using 20mm HBG Crushed metal in C.C. (1:3:6) and plastering neatly with 12mm thick in C.M (1:5).

The Pole has to be painted with 2 coats of enamel paint from coping to a height of 1.00 mtr and painting the remaining pole with 2 coats of Aluminum paint over one coat of red oxide paint as directed during execution. (Poles will be supplied departmentally and conveyance by the Contractor at his cost from Stores to Site).

Supplying and fixing in position M.S. Ornamental grills for windows and ventilators or for veranda openings using M.S. flats, Square rods, angles, sheets etc, of approved design including necessary cuttings, bending fabrication, welding, grinding and finishing smooth including painting the grills/channels/angles with two coats with synthetic enamel paint Gr.-I over a primary coat (Red oxide metal primer) (total three coats) of approved make and colour including cost of making the holes into RCC or masonry works and making good the same wherever necessary, including cost and conveyance of all materials incidental charges etc, complete.

Dismantling of existing U.G cables upto 50 Sq,mm and back filling of trench including labour charges etc., complete.

Dismantling of existing U.G cables size from 70 Sq,mm to 150 sq.mm and back filling of trench including labour charges etc.,complete.

Dismantling of existing U.G cables size from 185 Sq,mm to 400 sq.mm and back filling of trench including labour charges etc.,complete.

Fabrication, supply and transportation of all sizes swaged poles up to site confirming to IS 2713 / 1980 specifications. The pole should be painted with primary coat of red oxide and black bituminous paint up to ground level with base plate, including cost of all materials etc., complete.(Rate per K. G) 410 SP.6 for 7.5 mtrs. length of pole Planting depth in Mtrs. -1.25 Length of section in mtrs. : Bottom-4.50, Middle-1.50, Top-1.50 O.D & Thickness in mm : Bottom-114.5 x 5.4, Middle-88.9 x 4.85, Top- 76.1 x 3.25 Weight in Kg: Weight of pole - 93 Kg., Weight of base plate -5 Kg. (300 x 300 x 6mm) Total Weight - 98 Kg. Makes: Bajaj / Volmont / Transrail / utkarsh / Skipper / Laasma

Providing earthing as per IS 3043/ 1987 with 100mm (ID), 13mm thick C.I. Pipe of 3.0 mtr. length after excavating an earth pit of size1.5 m X 0.9 M X 3.00M(Top 1.50 m X 1.20 m X 0.9m & bottom 1.20 M X 1.20 M X 1.65 M) and filling with a homogenous layer of 40 Kgs. of Coke / Char Coal, 20 Kgs. of Salt and the required quantity of sand around 100mm pipe from the bottom of the pipe to a height of 2.7mtr. and filling the remaining excavated portion with earth and consolidation / Settlement of the trench should be done by filling with sufficient quantity of water

A concrete bed of size 0.8 M X 0.8 M X 0.1 M thick and an inspection chamber having inside measurements of 0.4 M X0.4 M X 0.4 M with wall thickness of 100 mm with cement concrete CC (1:2.5:5) using 20 mm HBG Metal is to be constructed with side wall 100 mm above ground level and plastering the exposed walls neatly with CM (1:3) with 12 mm thick. The Top of the Inspection Chamber is to be provided with reinforced precasted RCC Slab with 40mm thick with lifting hook. The top of C.I. Pipe is to be fixed & welded with suitable G.I. Wire mesh funnel 50mm x 6mm G.I. Strip having length of 300mm is to be fixed to the top of C.I. Pipe with G.I. Clamps fabricated with 50 x 3mm G.I. Flats with necessary bolts and nuts and necessary welding to be done to the clamps and C.I. Pipe.

2 Nos. of holes are to be drilled on either side of G.I. Flat for Extending earth connections. 65mm dia PVC Pipe is to be embedded at the pit entry for earth. After laying earth from earth conductor bus to Electrode trough PVC Pipe, the surface should be covered with bitumen and grease. The cost of GI/Copper flat to be run from CI Pipe electrode to the equipment is to be made separately on running meter basis. The work shall be executed strictly as per IS 3043 - 1987. The rate includes cost and conveyance of all materials, labour charges, incidental charges etc., complete (Note:- Necessary meggaring testing is to be carried out in the presence of concerned Engineers and measurement of resistance shall be as per ISI standards).

Supply and run of ' 8 ' SWG G.I wire for earth electrode to required places by Surface in walls, flooring including cost of all accessories and giving necessary connection with 3/8"x2" GI Bolts, Nuts and Washers wherever joints has to be done. The strip has to be either rivited (or) bolted (or) gas welding neatly and all labour charges etc., complete.

NOTE (i)The rates are of basic rates excluding GST. (ii) The applicable GST will be reimbursed/paid as per actuals on production of proof. (iii)Statutory deductions will be made as per norms, if applicable. Any modalities imposed on GST by the Government from time to time, the same will be implemented.

(Rupees Ten lakhs sixty three thousands seven hundred fifty nine and paise ninety eight only)