Construction of Veterinary Hospital at Bhambla Distt. Mandi (HP).

Amount

Excavation work by mechanial means (Hydraulic excavator/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50m and sorting out useful and unuseful material and transportation of the unuseful material for disposing at dumping site (To be arranged by the contractor) including payment of MC/ local body dumping charges it lived any as per satisfaction of Engineer-in-charge through all modes of transportation including head load, animal load or mechanical means along with its leveling fine dressing and with all kinds of labour, machineries, tools equipments and safety measures and incidentals necessary to complete. Any loss to the public and private propriety during the course of execution and disposal of serviceable and unserviceable materials shall be absolute responsibility of the contractor and shall have to be duly compensated by him in all respects including all incidental charges.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering- all work up to plinth level 1:5:10 (One cement : five sand : ten graded stone aggregate 40 mm (Forty millimeter) nominal size) including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Centering and shuttering including strutting, propping etc. and removal of form for .:- (a) Foundation footing bases of columns etc. and mass concrete including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

b) Columns, pillars, posts and struts. Square, rectangular or polygonal in plan for all floor level in all heights.

(c) Beams, cantilevers, girders and lintels sides and soffits of beams, beam hunchings, cantilevers, bressumers and lintels up to any depth(not exceeding 1mtrs in depth) for all floor level in all heights.

(d) Suspended floors, roofs, landings, balconies and access platform.

(e) Stair cases with slopping or stopped soffits exclding landing

(f) Vertical surface such as wall any thickness partition plaster and string course and like

Providing and laying cement concrete 1:3:6 (1cement:3sand:16graded stone agregate 20mm nominal size ) and curring complete excluding cost of form work in foundation and plinth, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and laying in position specified grade of reinforced cement concrete 1:1.5:3 (One cement : one point five sand : three crushed stone aggregate 20mm. (Twenty millimeter) nominal size) excluding cost of centering, shuttering, finishing and reinforcement all work up to plinth level including curing and carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.(a) Foundation footing bases of columns etc. and mass concrete.

Providing and laying reinforced cement concrete 1:1.5:3 (One cement : one point five sand : three crushed stone aggregate 20mm. (Twenty millimeter) nominal size) in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level excluding cost of centering, shuttering, finishing and reinforcement including curing and carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.(a) Foundation footing bases of columns etc. and mass concrete.

Reinforced cement concrete 1:1.5:3 (One cement : one point five sand : three crushed stone aggregate 20mm. (Twenty millimeter) nominal size) in beams, suspended floors, roofs having slop up to 15 degree landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level excluding cost of centering, shuttering, finishing and reinforcement including curing and carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge

Providing and laying up to floor five level reinforced cement concrete in kerbs, steps and the like excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1cement :1.5 coarse sand :3 graded stone aggregate 20 mm nominal size.

Providing Tor steel reinforcement including cost of binding wire for R.C.C. work including cutting, bending, binding and placing in position including cost of binding wire complete in Super-structure for all floor level in all heights, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. (Thermo-mechanically treated bars of grade Fe-500D or more).

Random rubble masonry/polygonal rubble masonry (uncoursed/brought to courses) with hard stones of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 (One cement : six sand : twelve crushed stone aggregate 20mm (Twenty millimeter) nominal size) at plinth level in Cement Mortar 1:6 (One cement: six sand) including curing and carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Excavation in foundation and trenches in earth work in all heights and depths in all kinds of soils, including saturated soils comprising of pick work both in soft and hard rock with chiseling and wedging out of rock (where blasting is prohibited) and their intermediate classification of soils including, dewatering wherever required, setting out to required lines, levels as shown on the drawing and directed by the engineer-in-charge at site., according to the HP.PWD. specification of 1990 (one thousand nine hundred ninety) volume-I (one) and sorting out useful and unuseful material and transportation of the unuseful material for disposing at dumping site (To be arranged by the contractor) including payment of MC/ local body dumping charges it lived any as per satisfaction of Engineer-in-charge through all modes of transportation including head load, animal load or mechanical means along with its leveling fine dressing and with all kinds of labour, machineries, tools equipments and safety measures and incidentals necessary to complete the work by mechanical means and labour (if required). Any loss to the public and private propriety during the course of execution and disposal of serviceable and unserviceable materials shall be absolute responsibility of the contractor and shall have to be duly compensated by him in all respects including all incidental charges.

Stone filling / Soling under floor dry hand packed with hard stone( 22.5 cm thick) of approved quality consolidated properly with hand or mechanical rammer to required level and preparing surface complete including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge.

Brick work using common burnt clay building bricks FPS (non modular) of class designation 7.5 in super structure for all floors in all heights in cement mortar 1:6 (One cement isto six sand) and curing complete including carriage of material through all modes of transporation within all leads and lifts and as per PWD specification and entire satisfaction and direction of Engineer-in-charge.

Half Brick masonry in common burnt clay building bricks FPS (non modular) in Cement Mortar 1:4 (One cement: four sand) in brick of class designation 7.5 in Super-structure above plinth level for all floors in all heights including curing complete, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing woodwork in frames of doors, windows, clerestory, windows and other frames wrought, framed and fixed in position with hole fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately) Sal wood in all floors level, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing pannelled glazed and pannelled and glazed door shutter for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete including carriage of all labour equipment & materials to various location through all leads & lifts complete as per entire satisfaction of the Engineer-in-Charge (Butt hinges and necessary screws shall be paid separetly 2nd class teak wood 35mm thick shutters).

Providing and fixing wire gauge shutters using galvanised M.S. wire gauge of average width of apertune 1.4 mm in both directions wth wire of dia 0.63mm, for doors, windows and clerestory windows with hinges with necessary screws 35 mm (Thirty five millimetre) thick shutter second class teak wood including carriage of all labour equipment & materials to various location through all leads & lifts complete as per entire satisfaction of the Engineer-in-Charge.

Providing & fixing aluminium sliding door bolt ISI marked anodized (anodic coating not less than grade AC-10 as per ID :1868), transparent or dyed to required colour and shade with bolts and nuts screws etc. complete, including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge. (a) 300mm x 16mm.

Providing and fixing aluminium tower bolts (ISI Marked ) anodized anodic coating not less than AC-10 as per IS :1868 transparent or dyed to required shade & colour., including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge. (a)300 x 10mm

Prooviding and fixing aluminium handles ISI marked anodised anodic coating not less than grade AC-10 as per IS 1868 with nuts and secrews etc complete., including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge. (a) 125mm.

Providing and fixing oxidized brass hooks and eyes 250mm ( Two hundred fifty millimeter)hundred , including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge.

P/F aluminium hanging floor door stopper, ISI marked anodised (anodic coating not less than grade AC 10 as per IS 1868 with nuts screws etc to suit shutter thickness complete , including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge.

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer(having brand logo with ISI, IS :3564, embossed on the body, door weight upto 35kg and door width upto 700mm) with necessary screws complete.

6mm (Six millimeter) Cement Plaster in cement mortar 1:3 (One cement : three sand) including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge.

15 mm cement plaster in single coat on the rough side of brick/concrete walls for internal plastering upto all floor level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80 mm in girth and finished even and smooth. Cement mortar 1:6 (1 cement : 6 sand) including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge.

15 mm (Fifteen millimeter) cement plaster in single coat on fair side of brick/concrete walls for internal plastering upto all floor level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80 mm (Eighty millimeter) in girth and finished even and smooth. Cement mortar 1:6 (One cement : six sand) including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge.

Distempering (Two or more coats) with dry distemper of approved brand and manufacture of requred shade on new work, over and including wate thinnable priming coat to give an even shade including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge.

Finishing wall with weather proofing cement paint of required shade new work (two or more coats applied @3.84 kg/10sqm) including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge.

Providing and fixing precoated galvanised iron profile sheet (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5 x55mm) with EPDM seal, upto any pitch in horizontal/vertical or cuved surfaces, excluding the cost purlins, rafters and trusses and including cuttig to size and shape wherever required including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge.

Providing steel work welded in built up sectionframed work, cutting hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge. (a) In trusses and trussed purlins in building.

b) In grating framed guard, bars ladders, railing, brackets and similar works i/c carriage of materials with in all lead and lift

Providing and fixing ridges or hips of width 60cm (Sixty centimeter) over all width plain GS sheet fixed with polymer coated J or L hooks, bolts and nuts 8mm dia GI limpet and bitumen washers complete 0.63mm thick with zinc coating not less than 275 gm/m2

GI metal ceiling lay in plain tegular edge global white color tiles of size 595 x 595mm and 0.5mm thick with 8mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending.

P/F 15cm wide 45cm overall semicircular plain GI sheet gutter with iron brackets 40 x 30 cm size bolt & nuts and washers i/c making necessary connection with rain water pipe complete in as per design.

Providing and fixing stainless steel hand rail complete in all respect.

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).

Providing and fixing in position collapsible steel shutters with vertical channels 20mm × 10mm ×2mm (Twenty millimeter into ten millimeter into two millimeter) and braced with flat iron diagonals 20mm×5mm (Twenty millimeter into five millimeter) size with top and bottom rails of T. iron 40mm×40mm×6mm (Forty millimeter into forty millimeter into six millimeter) with 38mm (Thirty eight millimeter) diameter steel pulley complete with bolts and nuts locking arrangements, stoppers, handles, including applying a priming coat of red lead paint, including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Providing and fixing Ist quality ceramic glazed floor tiles 300x300 mm 1st quality conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge..

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete size Size of Tile 600x600 mm

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone - III) : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.

Providing and applying crystalline mortar by mixing in the ratio of 4.5 : 1 (4.5 parts crystalline mortar : 1 part water) for the treatment of faulty construction joints, cracks, tie rod holes and spalled & honeycombed surface of RCC underground structures like basement, water tanks, bridge deck etc. to ensure water tightness. The crystallie mortar shall conform to the EN 1504-3 having compressive strength Class R4 > 45 MPa and adhesive bond strength Class R3 > 1.5 MPa. The work shall be carried out all complete as per specification and the direction of the Engineer-In-Charge. The product performance shall carry guarantee for 10 years against any leakage. for sealing cracks and faulty construction joints, routed out/making U-shape groove size 25x25mm and then primed the area with integral crystalline slurry @0.05kg/running metre and while the surface is tacky filled the groove upto surface with crystalline mortar @1.50kg/ running metre. Once crystalline mortar is touch dry then finally applied two coats of integral crystalline slurry @0.05kg/running metre per coat.

Providing and laying Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate laid in one layer finished with floating coat of neat cement 50mm thick.

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications.Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.80 ltr/10 sqm of approved brand and manufacture

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications. Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382,leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A,including jointing with seal ring conforming to IS : 5382,leaving 10 mm gap for thermal expansion. 110 mm bend accesseries bend

Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110 mm

Providing anf fixing color glass for tromble wall 5.5mm thick completion all respect as rubber washer etc.

12 mm thick pre-laminated particle board (decorative lamination on both sides) grade - 1, medium density flat pressed, three layer particle board FPT- I or graded wood particle board FPT- I, conforming to IS : 3087, bonded with BWP type synthetic resin adhesive as per IS : 848 and pre- laminated conforming to IS : 12823, Grade 1, Type - II marked : for ceiling

Providing and fixing pine wood ceiling of approved quality with butt jointing board 12.0 mm thick complete in all respect (frame work i/c all accessories is inclusive in the item).

stone work in plain ashlar in super structure upto floor five level in cement mortar 1:6 (1cement :6 coarse sand) includingn pointing with cement mortar 1:2 (1 white cement :2 stone dust) with an admixture of pigment matching the stone shade 7.12.1 one face dressed red sand stone.

Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge.

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.

Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : 15 mm dia nominal bore

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : 15 mm nominal bore

Providing and fixing PVC connection.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 32 mm dia

Providing and fixing PVC floor trap ISI marked of self cleaning design including sand cast iron screwed down or hinged grating with or without vent arm complete i/c cost of cutting and making good the wall and floors etc. complete, including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge. 100mm nominal dia

Providing and fixing 100 mm sand cast Iron grating for gully trap or nahni trap

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore

Providing and fixing C.P. brass bib tap with capaston head 15mm dia (Jaguar /Excel make).

Providing and fixing CP pillar tap with capaston head 15mm dia

Providing and fixing C.P. Brass Towel rail complete with C.P. Brass brackets fixed to wooden plugs with C.P. Brass screws and washers. 600 mm x 20 mm (Six hundred millimeter into twenty millimeter) including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge.

Providing and fixing 600 mm x 450 mm (Six hundred millimeter into four hundred fifty millimeter) bevelled edge mirror of superior glass mounted on 6 mm (Six millimeter) thick A.C. Sheet or plywood sheet and fixed to wooden plugs with C.P. Brass screws and washers, including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge.

Providing and fixing brass soap dish with C.P. Brass brackets fixed to wooden cleats with C.P. Brass screws, including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge.

Single equal branch of required degree with oval access door, insertion rubber washer 3mm thick nut and bolt complete 100mm dia

P/ F PVC plain bend ISI marked i/c fixing with approved adhesive etc. complete (Finolex type-B) (i) 110mm dia

P/F PVC collors ISI marked i/c fixing with approved adhesive etc. complete

Providing and fixing PVC water storage tank of 1000 Ltr capacity ISI: 12701 marked, G.I. inlet and outlet connection, 15 mm (Fifteen millimeter) nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting up to all heights above ground level including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge.

P/F on wall face centrifugally cast iron (D-Plast) spigot pipes for working pressure not less than 4.5 kg/sqm including filling the joints with approved adhesive complete -100mm dia pipe

P/F laboratory sink of ISI marked with drain board & CP waste with CI or MS brackets painted with i/c cutting holes etc. 600mm x 250mm with bowledepth 200mm.

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Providing and fixing dry cladding upto 10 metre heights with 30mm thick gang saw cut stone with (machine cut edges) of uniform colour and size upto 1mx1m, fixed to structural steel frame work and/ or with the help of cramps, pins etc. and sealing the joints with approved weather sealant as per Architectural drawing and direction of Engineer-in-charge. (The steel frame work, stainless steel cramps and pins etc. shall be paid for separately). 30mm red Sand stone.

Providing and fixing structural steel frame (for dry cladding with 30 mm thick gang saw cut with machine cut edges sand stone) on walls at all heights using M.S. square/ rectangular tube in the required pattern as per architectural drawing, including cost of cutting, bending, welding etc. The frame work shall be fixed to the wall with the help of M.S. brackets/ lugs of angle iron/ flats etc. which shall be welded to the frame and embedded in brick wall with cement concrete block 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20 mm nominal size) of size 300x230x300 mm, including cost of necessary centring and shuttering and with approved expansion hold fasteners on CC/RCC surface, including drilling necessary holes. Approved cramps/ pins etc. shall be welded to the frame work to support stone cladding, the steel work will be given a priming coat of Zinc primer as approved by Engineer- incharge and painted with two or more coats of epoxy paint (Shop drawings shall be submitted by the contractor to the Engineer-in-charge for approval before xecution). The frame work shall be fixed in true horizontal & vertical lines/planes. (Only structural steel frame work shall be easured for the purpose of payment, stainless steel cramps shall be paid for separately and nothing extra shall be paid).

Providing and fixing adjustable stainless steel cramps of approved quality, required shape and size, adjustable with stainless steel nuts, bolts and washer (total weight not less than 260 gms), for dry stone cladding fixed on frame work at suitable location including making necessary recesses in stone slab, driling required holes etc complete as per direction of the Engineer-in-Charge.

Providing and fixing expandable fasteners of specified size with necessary plastic sleeves and galvanised M.S. screws including drilling holes in masonry work /CC/ R.C.C. and making good etc. complete: 32 mm long

Providing and fixing white vitreous china pedestal for wash basin completely recessed at teh back for the reception of pipes and fittings.

Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in- Charge. 60mm thick cement concrete paver block of M-40 grade approved by HPPWD (NTC/Ashok Panjla Tiles/NTCCI/Pooja Concrete Fabricators, M/S Dalal Tiles Pvt. Ltd.) with approved color design and pattern including carriage of materials upto all leads and lifts.

Biri SIngh

AIDANT IMPLEMENTATION PRIVATE LIMITED

Ramesh Chand Govt. Contractor

Anil Kumar

Subham Mahajan

MNBN Enterprises