Work

Amount

1) Following Transportation works are to be carried out for arrangement of Auxiliary Structures & Equipments for construction of 01 No. new 33 K.V. Feeder Bay at 220 K.V. Sub Station C. G. City under E.T.D. - II, Lucknow with all Cost of Men, T&P, Transportation Vehicle etc. for satisfactory completion of the work :

a) Safe Carriage of Auxiliary Structures from E.F.U. Naini, Allahabad to 220 K.V. Sub Station C. G. City, Lucknow including Loading on Carriage Vehicle, Unloading, Sorting and Stacking of different Structures as per BOQ / Material Schedule at receiving site .

b) Safe Carriage of following equipments as needed from 220 K.V. Sub Station Gomti Nagar / other Transmission Sub Station in Lucknow (approx. max. distance 15 km) to 220 K.V. Sub Station C. G. City including Loading on carriage Vehicle and Unloading at receiving site.

(i) 33 K.V. C.B.

(ii) 33 K.V. C.T.

(iii) 33 K.V. Bus / Line Isolator with Insulators

(iv) ACSR Panther Conductor

2) Erection of following Structures / Equipments for construction of 33 K.V. Feeder Bay at Sub Station as per instruction manual of various equipments & Technical Specifications including shifting of Structures / Equipments from Store to Erection site including all other associated works for completion of Erection work satisfactorily :

a) Aux. Structure

b) 33 K.V. C.B.

c) 33 K.V. C.T.

d) 33 K.V. Bus Isolator without Earth Blade

e) 33 K.V. Line Isolator with Earth Blade

f) 33 K.V. C.T. Junction Box

3) Cutting, Straightening, Laying 700 mm below inside ground & above ground of 50 mm x 6 mm size & 25 mm x 5 mm size M.S. Flats to be provided by Department as per requirement at Sub Station for Earthing of newly erected Main & Aux. Structures, Equipments, Cable Trenches including welding with main Earthmat and with the object to be earthed, excavation of Trenches, its back filling, Painting of Earthmat above ground level in Bus Green colour including all other associated works to complete the Earthing work satisfactorily, as per Technical Specifications :

a) Earthing of Aux. Structures & Equipments with 50 mm x 6 mm size M.S. Flat

b) Earthing of new Cable Trench Racks / Peak Mast with 25 mm x 6 mm size M.S. Flat

4) umpering of Equipments of 33 K.V. Feeder Bay with the help of ACSR Panther Conductor including Bus Bar (Main & Transfer) Conductors to Equipments with suitable Clamps to be provided by the Department.

5) Laying of Following sizes of Control Cables in the Cable Trenches from Control & Relay Panels in Control Room to various Equipments, Junctions Boxes etc. in Switchyard as per Cable Schedule, its saddling with 25 x 3 mm size including Carriage of Cable Drums from Stores to work site & Shifting back to Stores the balance Cable including all other associated works to complete the job satisfactorily as per Technical Specifications :

a) Laying of 2 x 2.5 mm2 size Control Cable

b) Laying of 4 x 2.5 mm2 size Control Cable

c) Laying of 6 x 2.5 mm2 size Control Cable

6) Inter-connection & Termination of above laid Control Cables between 33 K.V. Triple Feeder C&R Panel and erected equipments i.e. C.B., C.T., C.T. Junction Box, P.T., P.T. Junction Box including making necessary holes in Gland Plates or Boxes wherever required alongwith supply & fixing of Cable Glands of appropriate size & providing of Ferrules for each core of the Cables & its termination with crimping type Copper Lugs alongwith preparation of Inter-connection Drawing and Commissioning of the Panel / Feeders in co-ordination with T&C Wing including providing of 2 Sets of Hard Copies of as executed Inter-connection Drawing including all other associated works to complete the job satisfactorily as per Technical Specifications.

7) Name Plates made of 2 mm thick aluminium sheet covered with 3 M HIP retro reflective sheet of size 300 mm x 200 mm with details / name written by using 3 M HIP retro reflective sheet as per prescribed colour scheme to be fixed with the help of nuts & bolts at already installed equipment structures in the switch yard with all cost of plates, nuts & bolts, misc. materials, T&P and labour as per technical specifications and directions of concerned Engineer at the substation.

8) 'R' 'Y' 'B' phase plate set consisting of 1 plate of Red, Yellow, Blue in each set and plates of dia 150 mm duly made of 2 mm thick aluminium sheet with face to be fully covered in red, yellow and blue phase colours 3 M HIP retro reflective sheet and the phase plates set to be fixed with the help of suitable size GI bolts, nuts on already installed equipments structures at the substation.

M/S Shiv Shakti Enterprises

lodhi switchgear enterprises