Edamalakkudy GP Plan 2021 22 Construction Of Community Hall At Ward 13 Construction of Anganwady building at Parappayarkudy Pr No 31

Amount

Community Hall Building

2.6.1 : Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil

2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

od1212041/2021_2022 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:<br>1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)(Added Additional 20% conveyance for Edamalakkudy as per DB3-753/2013/CE/LSGD dtd 04-01-2021)

od1212042/2021_2022 : DRY RUBBLE MASONRY _ Dry rubble without concrete levelling course masonry with good quality blasted rubble including packing to compactness to lines and levels cost and conveyance of all materials labour charges etc. complete as per direction of Departmental officers at site(Added Additional 20% conveyance for Edamalakkudy as per DB3-753/2013/CE/LSGD dtd 04-01-2021)

od1212043/2021_2022 : Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:<br>Cement mortar 1:6 (1 cement : 6 coarse sand)(Added Additional 20% conveyance for Edamalakkudy as per DB3-753/2013/CE/LSGD dtd 04-01-2021)

od1212044/2021_2022 : Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:<br>1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size(Added Additional 20% conveyance for Edamalakkudy as per DB3-753/2013/CE/LSGD dtd 04-01-2021)

od1212045/2021_2022 : Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete(Added Additional 20% conveyance for Edamalakkudy as per DB3-753/2013/CE/LSGD dtd 04-01-2021)

od1212046/2021_2022 : Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 15<sup>0</sup> landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size).(Added Additional 20% conveyance for Edamalakkudy as per DB3-753/2013/CE/LSGD dtd 04-01-2021)

5.9.5 : Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers

od1212047/2021_2022 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth level<br>Thermo - Mechanically Treated bars of grade Fe-500D or more(Added Additional 20% conveyance for Edamalakkudy as per DB3-753/2013/CE/LSGD dtd 04-01-2021)

50.9.1.1 : Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately), using good quality Anjili wood /jack wood

50.9.2.2 : Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, 35 mm thick shutters including ISI marked M.S. pressed butt hinges bright finished of required sized with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer in-charge using Pincoda wood

50.9.6.1 : Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Using Anjili wood / jack wood 30 mm thick shutters

od1212048/2021_2022 : Roofing with GI trafford profile sheet 0.35mm thick, powder coated with overlapes of 150mm at ends and ss screw including plane washers bitmon washers etc complete

od1212049/2021_2022 : Plain GI ridge capping 225 mm flaps with 0.63 thick / nearest available size SS screws including plain washers and bitumin washers etc complete

od1212050/2021_2022 : Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.(Added Additional 20% conveyance for Edamalakkudy as per DB3-753/2013/CE/LSGD dtd 04-01-2021)<br>Hot finished welded type tubes

od1212051/2021_2022 : Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.(Added Additional 20% conveyance for Edamalakkudy as per DB3-753/2013/CE/LSGD dtd 04-01-2021)

od1212052/2021_2022 : 12 mm cement plaster of mix:<br>1:4 ( 1 cement : 4 fine sand)(Added Additional 20% conveyance for Edamalakkudy as per DB3-753/2013/CE/LSGD dtd 04-01-2021)

od1212053/2021_2022 : Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:<br>Water thinnable cement primer(Added Additional 20% conveyance for Edamalakkudy as per DB3-753/2013/CE/LSGD dtd 04-01-2021)

od1212055/2021_2022 : Applying priming coats with primer of approved brand and manufacture, having low VOC ( Volatile Organic Compound) content.<br>With ready mixed pink or grey primer on wood work (hard and soft wood ) having VOC content less than 50 grams/ litre(Added Additional 20% conveyance for Edamalakkudy as per DB3-753/2013/CE/LSGD dtd 04-01-2021)

od1212132/2021_2022 : Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:<br>Two or more coats on new work(Added Additional 20% conveyance for Edamalakkudy as per DB3-753/2013/CE/LSGD dtd 04-01-2021)

od1212056/2021_2022 : Painting with synthetic enamel paint, having VOC (Volatile Organic Compound) content less than 150 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.<br>Two coats(Added Additional 20% conveyance for Edamalakkudy as per DB3-753/2013/CE/LSGD dtd 04-01-2021)

od1212057/2021_2022 : Providing and fixing I st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer -in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.(Added Additional 20% conveyance for Edamalakkudy as per DB3-753/2013/CE/LSGD dtd 04-01-2021)

od1212058/2021_2022 : Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.<br>Size of Tile 600 x 600 mm.(Added Additional 20% conveyance for Edamalakkudy as per DB3-753/2013/CE/LSGD dtd 04-01-2021)

od1212059/2021_2022 : Providing and fixing white vitreous china water closet squatting pan ( Indian type):<br>Orissa pattern W.C. pan of size 580x440 mm(Added Additional 20% conveyance for Edamalakkudy as per DB3-753/2013/CE/LSGD dtd 04-01-2021)

od1212060/2021_2022 : Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:<br>Stainless Steel AISI - 304 (18/8) Wash basin 530 x 345 mm with single 15mm C.P. brass pillar tap(Added Additional 20% conveyance for Edamalakkudy as per DB3-753/2013/CE/LSGD dtd 04-01-2021)

50.18.9.9.2 : Providing and fixing PVC pipes includes joints of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in CHarge. 110 mm dia 4 Kg/cm2

50.18.7.2.2 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge 20 mm dia 10 Kgf/cm2- Internal work - Exposed on wall

od1212136/2021_2022 : Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.(Added Additional 20% conveyance for Edamalakkudy as per DB3-753/2013/CE/LSGD dtd 04-01-2021)

Vazhakattuvalli

Bidder Name

Vazhakattuvalli

Taab constructions