PROVISION OF DRAINAGE SYSTEM OF COOK HOUSE OF FD REGT AND OTHER SANCTIONED WORKS UNDER GE MISAMARI

Amount

Demolition Cement Concrete (un-reinforced) of any description in Ground Floors, Pavings, etc. not exc. 150mm thickness (above or below Ground Level), complete all as specified and as directed. (Note:Demolished material to be used for filling under floors to bring upto required level, if neccesary)

Dismantling Floor, Hearth or Wall Tiling including Cement Mortar Bedding (but not backing), removing from the Sites and rubbish off the Premises, complete all as specified and as directed.

Dismantling Wall and Ceiling Boards (Fibre, Pulp, Insulation, etc.) or Insulation Boards /Blankets/Slabs, any description and any thickness including Cover Fillets, Cornices, etc., complete all as specified and as directed.

Demolition Brick Work or Stone/ Bolder masonary built in Cement Mortar including all Quoins, Arches, Pillars, etc. of any description, complete all as specified and as directed. Note:Demolished material to be used for filling under floors to bring upto required level.

Taking down Chowkat or Frame (without taking off Shutter from the Frame) exc. 1.50 Square Metre but not exc. 4.00 Square Metre Each, complete all as specified and as directed.

Dismantling Plain or Corrugated Steel Sheeting of any gauge and thickness including Nainital or similar Roof Coverings, complete all as specified and as directed.

Surface dressing n exc15 cm deep in soft and loose soil, complete all as specified and directed.

Surfaces excavation n. exc 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and as directed.

Excavation in trenches not exc. 1.5 Metre Wide and not exc. 1.50 Metre in Depth for foundation etc. or for Shafts, Wells, Cess Pits, Manholes, Pier Holes for laying of UG Cable/Pole/Stays etc, and getting out as in Soft/Loose Soil, complete all as specified and as directed.

Returning, Filling in, including Spreading, Levelling, Watering and Well Ramming in Layers not exc. 25 Cm in Soft/Loose Soil, complete all as specified and as directed.

Removing excavated Materials (Soils) not exc. 50.00 Metre and depositing where directed at a level not exc. 1.50 Metre above the Starting Point in Soil, complete all as specified and as directed.

Excavating in post holes (or simlar holes) each n exc. 0.50 cm getting out returing filling in and ramming earth as broken rubble mixed with earth around in layers n exc. 25 cm watering & removing surplus soil to a distance n exc. 50 m and making good surface.

M&L Hardcore of broken stone or boulders of gauge exc.n. 63mm , deposited, spread and levelled in layers not exc. 15 Cm thick, watered and rammed to a True Surface, complete all as specified and as directed.

M&L Hardcore of broken stone or boulders of gauge exc. 63mm but not exc.100mm, deposited, spread and levelled in layers not exc. 15 Cm thick, watered and rammed to a True Surface, complete all as specified and as directed.

M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and as directed.

M&L Cement Concrete 1:3:6 type C2 (40mm graded aggregate) in Surface Channels and Drains, etc. including Formwork as required/ordered at Site(s), complete all as specified and as directed.

M&L Cement Concrete 1:2:4 type B2 (40mm graded aggregate) in Surface Channels and Drains, etc. including Formwork as required/ordered at Site(s), complete all as specified and as directed.

M&L Brick Work with Sub-Class ‘B’ Bricks (with Old Size Bricks), Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:4, complete all as specified and as directed.

M&L Brick Work with Sub-Class ‘B’ Bricks (with Old Size Bricks), Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:6, complete all as specified and as directed.

M&L brick work with sub-class ‘B’ Bricks Straight or Curved on Plan exc.any radius in half brick thick built in Cement Mortar 1:4, complete all as specified and as directed.

M&L for PCC (1:2:4) type B-1 using 20 mm graded aggregate as in benching of manholes including finishing even and smooth using extra cement complete all as specified and directed.

M&L for PCC 1:3:6 type C1 ( Using 20mm graded agg) as in plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates concrete complete all as specified and directed.

M&L Rendering 15mm thick in Cement Mortar 1:4 (External) on Fair Faces of Brick Walls or on Concrete Surfaces in Two Coats, 1st Coat of 10mm thick and 2nd Coat of 5mm thick including mixing with WPC to 2nd Coat as per Manufacturer's instructions, Plastered Surfaces finished Even and Smooth without using Extra Cement, complete all as specified and as directed. NOTE : Integral Water Proofing Compound shall be Measured and Paid separately as ‘Supply only’ under relevant Items.

M&L Extra forming Fair Finished to Drains or Channels 30 Cm Inner Girth in Cement Concrete using Extra Cement including Forms Moulds Mitred/ Stopped Ends, etc., complete all as specified and as directed.

Supply only Integral water proofing compound (WPC), conforming to IS 2465-1975 and as approved, complete all as specified.

M&L for 20mm thick Cement Concrete Type B0 1:2:4 (12.5mm graded aggre-gate) as in Damp Proof Course to horizontal or vertical surfaces including necessary formwork using wpc@3% of weight of cement including necessary formwork, complete all as specified and as directeed. NOTE : WPC will be measured and paid as ‘Supply only’ under appropriate Item.

M&L for 300mm dia reinforced concrete pipes, class NP2, laid and jointed complete with collars complete all as specified.

M&L Cement Concrete Bed 1:3:6 (40mm graded aggregate) of 300mm bore (dia) Drain Pipes including Packing under and Haunching to Sides of the pipes after Laying and Testing of Pipe, complete all as specified and as directed.

M&L Cement Concrete Bed 1:3:6 (40mm graded aggregate) of 150mm bore (dia) Drain Pipes including Packing under and Haunching to Sides of the pipes after Laying and Testing of Pipe, complete all as specified and as directed.

M&L Cement Concrete Bed 1:4:8 type D2 (40mm graded aggregate) of 150mm bore (dia) Drain Pipes including Packing under and Haunching to Sides of the pipes after Laying and Testing of Pipe, complete all as specified and as directed.

M&L Pre-cast Reinforced Cement Concrete (nominal mix) 1:2:4 type B1(20mm graded stone aggregate) in Slab Supported on wall, Cover Slabs for Manholes, Shelves and Similar Articles, etc., Set in Cement Mortar 1:6 including use and waste of Formwork as required/ordered at Site(s), complete all as specified and as directed. NOTE : Reinforcement will be measured and paid separately under relevant Item.

M&L Pre-cast Reinforced Cement Concrete (nominal mix) 1:2:4 type B1(20mm graded stone aggregate) in Slab Supported on wall, Cover Slabs for Manholes, Shelves and Similar Articles, etc., Set in Cement Mortar 1:4 including use and waste of Formwork as required/ordered at Site(s), complete all as specified and as directed. NOTE : Reinforcement will be measured and paid separately under relevant Item.

M&L Pre-cast Reinforced Cement Concrete (nominal mix) 1:1.5:3 type A1(20mm graded stone aggregate) in Slab Supported on wall, Cover Slabs for Manholes, Shelves and Similar Articles, etc., Set in Cement Mortar 1:6 including use and waste of Formwork as required/ordered at Site(s), complete all as specified and as directed. NOTE : Reinforcement will be measured and paid separately under relevant Item.

M&L Reinforced Cement Concrete (Nominal Mix) B1 1:2:4 (20mm graded stone aggregate) as in slab supported on wall,beam and column in floor,roof,landing,balconies,canopies,deck slab and in shelves and the like complete all as specified and as directed. NOTE : Reinforcement & Formwork will be measured and paid separately under relevant Items.

M&L TMT Bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia, complete all as specified and as directed.

All as per Item no. 35 here in before but for 6mm to 8mm, complete all as specified and directed.

M&L TMT Bars 5mm dia and over upto and including 10mm dia in Stirrups, Spacers and Binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia, complete all as specified and as directed.

M&L Cement Concrete 1:4:8, Type D2, (40mm graded aggregate) in Foundations, Filling and Mass Concrete, etc. including Use and Waste of Formwork as required/ordered, complete all as specified and as directed.

M&L Cement Concrete 1:5:8, Type E2, (40mm graded aggregate) in Foundations, Filling and Mass Concrete, etc. including Use and Waste of Formwork as required/ordered, complete all as specified and as directed.

M&L Cement Concrete 1:2:4, Type D2, (40mm graded aggregate) in Foundations, Filling and Mass Concrete, etc. including Use and Waste of Formwork as required/ordered, complete all as specified and as directed.

M&L 100mm thick Cement Concrete 1:4:8, type D2 (40mm graded aggregate), as in Sub-base finishing Concrete Surfaces Even and rough, complete all as specified and as directed.

M&L 100mm thick Cement Concrete 1:3:6, type B-1 (20mm graded aggregate), as in floor finishing Concrete Surfaces Even and rough, complete all as specified and as directed.

M&L 100mm thick Cement Concrete 1:3:6, type C-2 (40mm graded aggregate), as in hardstanding,laid in alternate bays,including brooming while concrete is green, complete all as specified and as directed.

M&L for 75mm thick PCC 1:2:4 type B-2 using 40mm graded crushed stone aggregate as in sub base finished even including spike rolling to surface or making impressions of expanded metal, whilst the concrete is green complete all as specified and as directed.

M&L for 75mm thick Cement Concrete 1:2:4,type B1 (20 mm graded aggregate) as in floors finishing Concrete Surfaces Even and smooth without using extra cement , complete all as specified and as directed.

M&L 75mm thick Cement Concrete 1:4:8, type D2 (40mm graded aggregate), as in Sub-base finishing Concrete Surfaces Even and rough, complete all as specified and as directed.

M&L 40 mm thick Cement Concrete 1:2:4, type B-1 (20mm graded aggregate), as in floor finishing Concrete Surfaces Even and rough, complete all as specified and as directed.

M&L 25mm thick Cement Concrete 1:2:4, type D2 (12.5 mm graded aggregate), as in Sub-base finishing Concrete Surfaces Even and rough, complete all as specified and as directed.

M&L Reinforced Cement Concrete (Nominal Mix) 1:2:4 type B1(20mm graded aggregate) in Foundations including Rafts, Footings, Foundation Beams; Plinth Beams; bases for Columns, etc.; Basement Slabs, Under-reamed Piles and Mass Concrete, complete all as specified and as directed. NOTE : Reinforcement & Formwork will be measured and paid separately under relevant Items.

M&L Reinforced Cement Concrete (Nominal Mix) 1:1.5:3 (20mm graded aggregate) in Foundations including Rafts, Footings, Foundation Beams; Plinth Beams; bases for Columns, etc.; Basement Slabs, Under-reamed Piles and Mass Concrete, complete all as specified and as directed. NOTE : Reinforcement & Formwork will be measured and paid separately under relevant Items.

M&L Reinforced Cement Concrete (Nominal Mix) A1 1:1.5:3 (20mm graded aggregate) in Columns, Pillars, Piers, Posts and Struts, etc. complete all as specified and as directed. NOTE : Reinforcement & Formwork will be measured and paid separately under relevant Items.

M&L Steel Work in Tubular Trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS:1161-1979 grade St.-240, complete all as specified and as directed.

M&L for Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for largegates; hook and pintle hinges:large hasps and staples; chains; hand made sliding bolts; clamps;hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165, complete all as specified and as directed.

S&F Pre-painted Galvalume Aluminum Zinc Coating GI based Corrugated Steel Sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding, fixed with self tapping screws as specified, complete all as specified and as directed.

S&F Pre-painted Galvalume Aluminum Zinc Coating GI based Plain Steel Sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified, complete all as specified and as directed.

S&F colour coated GI based galvalume steel sheeting 0.5mm thick with 1.5 corrugation side lap fixed with self drilling screw in roof, wall etc. complete all as specified and as directed.

M&L preparing new or previously untreated Steel and Iron Surfaces of any description, over. 10 Cm Width or Girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a Red Oxide Zinc Chrome Primer, complete all as specified and as directed.

M&L preparing old painted Steel and Iron Surfaces of any description, over. 10 Cm Width or Girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a Red Oxide Zinc Chrome Primer, complete all as specified and as directed.

M&L preparing new or previously untreated Wooden Surfaces of any description, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a coat of Pink Primer, complete all as specified and as directed.

M&L preparing old CGI/PGI Sheet as on wall and roof surfaces, over 10 Cm width or girth and applying one Coat of Synthetic Enamel Paint (First quality), complete all as specified and as directed.

M&L Reinforced Cement Concrete (Nominal Mix) 1:1.5:3,type A1 (20mm graded stone aggregate) as in beams, cantilevers, bressummers, lintels over 1.50 Metre span, complete all as specified and as directed. NOTE : Reinforcement & Formwork will be measured and paid separately under relevant Items.

M&L Reinforced Cement Concrete (Nominal Mix) 1:2:4,type B1 (20mm graded stone aggregate) as in beams, cantilevers, bressummers, lintels over 1.50 Metre span, complete all as specified and as directed. NOTE : Reinforcement & Formwork will be measured and paid separately under relevant Items.

M&L Formwork to Sides of Concrete Foundations, Footings, bases of Columns, Raft and Raft Beams, Sides and Soffits (if any) of foundation and plinth beams and similar work; Square, rectangular or polygonal, vertical or to batter, flat, rough finished surfaces of concrete, complete all as specified and as directed.

M&L Formwork to Sides and Soffits of Floor or Roof Beams, Lintels, Cantilevers, Shelves including Supports, Overhangs, etc. also splays between Floors and Beams, etc., rough finished surfaces of Concrete, complete all as specified and as directed.

M&L Formwork to Soffits of suspended Slabs such as Roof Slabs, Floor Slabs, Landings and similar work; not exc. 200mm thick (horizontal or sloping), rough finished surfaces of Concrete, complete all as specified and as directed.

M&L Formwork to sides of Pillars, Posts, Struts, Piers, Columns and stanchions, flat, rough finished surfaces of concrete, complete all as specified and as directed.

M&L Rendering 15mm thick in Cement Mortar 1:6 on Brick Walls or on Concrete Surfaces, plastered surfaces finished Even and Smooth without using Extra Cement, complete all as specified and as directed.

M&L Rendering 15mm thick in Cement Mortar 1:4 on Brick Walls or on Concrete Surfaces, plastered surfaces finished Even and Smooth without using Extra Cement, complete all as specified and as directed.

M&L Rendering 5mm thick in Cement Mortar 1:3 on Brick Walls or on Concrete Surfaces, plastered surfaces finished Even and Smooth without using Extra Cement, complete all as specified and as directed.

M&L Rendering 5mm thick in Cement Mortar 1:3 on Concrete Surfaces as in ceiling, plastered surfaces finished Even and Smooth without using Extra Cement, complete all as specified and as directed.

M&L Cement Concrete 1:3:6, C2 (40mm graded aggregate), 75mm thick as in Plinth Protection, etc., laid in alternate bays, finishing Concrete Surfaces Even and Smooth without using Extra Cement, complete all as specified and as directed.

M&L Non skid ceramic coloured jointless tiles 7 to 8mm thick (Square/ Rectangular) area of each tiles exceeding 0.06 Sqm but n.exc. 0.11 Sqm in floors etc. over and including 15 mm thick screed bed in CM 1:4 set and jointed in neat cement slurry and pointed in white or colored cement to match the surface of tiles complete all as specified and as directed.

M&L Non skid ceramic coloured jointless tiles 7 to 8mm thick (Square/ Rectangular) area of each tiles exceeding 0.11 Sqm but n.exc. 0.18 Sqm in floors etc. over and including 15 mm thick screed bed in CM 1:4 set and jointed in neat cement slurry and pointed in white or colored cement to match the surface of tiles complete all as specified and as directed.

M&L Non skid ceramic coloured jointless tiles 7 to 8mm thick (Square/ Rectangular) area of each tiles exceeding 0.18 Sqm but n.exc. 0.38 Sqm in floors etc. over and including 15 mm thick screed bed in CM 1:4 set and jointed in neat cement slurry and pointed in white or colored cement to match the surface of tiles complete all as specified and as directed.

M&L glazed ceramic coloured tiles, glossy finished of size 350x450x7mm/ 350x250x7mm thick as in vertical surfaces such as skirting/dados and riser of stems., over and including including 10 mm thick rendering/backing coat in CM 1:4 and set and jointed in neat cement slurry and pointed in white or colored cement to match the surface of tiles,complete all as specified and as directed.

M&L Vitreous China White Wash Down Water Closet Pan (Pedestal Pattern) with Trap and Fixing Bolts (excluding Flushing Cistern and Flush Pipe) including connection to drain (or outgoing pipe) and to Flushing Pipe, Anti-syphonage Pipe, etc. and Making Good to Floor /distrubed surfaces and fixed-in-repair including health faucet with 1mtr long easy flex tube in chrom finish & wall hook, complete all as specified and as directed.

S&F PVC Flushing Cistern 10 Litre capacity White, Low Level, valve less, syphonic action type with Inlet, Ball Valve, Float and handle, a pair of Cast Iron Brackets Erecting Stand duly painted including cutting and pinning in ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 and fixed, complete all as specified and as directed.

S&F PVC Connection Pipe 15mm in size with PTMT Nuts of length 450mm and fixed, complete all as specified and as directed.

All as per Item no.78 here in before but for 600 mm, complete all as specified and directed.

S&F in repair vitreous China Urinal, Half stall type,white/ivory (excluding Flushing Cistern, Flush Pipe and Waste Pipe) with Grating and Union for Discharge Pipe including connection to flushing pipe and outgoing waste pipe, complete all as specified and as directed.

S & F vitreous china bowl urinal flat back, size of 465x355x265mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe , and waste pipe), complete including providing and fixing plugs, bedding urinal against wall in CM 1:2 and incl 60cm long brass screws pointing around urinal back in cement etc complete all as specified and directed.

S&F Vitreous China Wash Hand Basin 550x 400mm in size, White (Flat Back or Angle Back Type) with 32mm bore waste coupling of PTMT (half or full threaded of minium weight 32-45gms), a Pair of Cast Iron Brackets duly Painted/ Erecting Stand including Cutting and Pinning in Ends, Making Good disturbed Surfaces in Cement Mortar 1:3, complete all as specified and as directed.

S&F Stop Valve 15mm bore (dia), Fancy type, chromium plated, screwed down, high pressure, with Crutch or Butter-fly Handle, screwed both Ends for Iron Pipe or for Unions and fixed, complete all as specified and as directed.

S&F Stop Cock 15mm bore , Chromium Plated with long shank, Concealed type, screwed down high pressure with Crutch or Butter-fly Handle, screwed both Ends for Iron Pipe or for Unions and fixed, complete all as specified and as directed.

S&F in repair bib Tap 15mm bore (dia) Fancy Type, Cast Copper Alloy, Chromium Plated with Crutch or Butter-fly Handle, screwed down, screwed for Iron Pipe or for Brass Ferrule and fixed, complete all as specified and as directed.

S&F bib Tap 15mm bore (dia) Fancy Type, Cast Copper Alloy, Chromium Plated with Crutch or Butter-fly Handle, screwed down, screwed for Iron Pipe or for Brass Ferrule and fixed, complete all as specified and as directed.

S&F in repair PTMT grating Doom 100mm dia (minimum weight 25 Grams) complete all as specified and as directed.

S&F Pillar Tap 15mm bore (dia) fancy type, Cast Copper Alloy, Chromium Plated with Capstan Heads, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed Shanks and Fly-nuts, screwed for Iron Pipe and fixed, complete all as specified and as directed.

M&L Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and as directed.

M&L Sheet Glass, Ordinary, 3.0mm thick, Glazing in Wooden/Metal Frames and glazed with Beads or Oil Putty, area not exc. 0.50 SQM in Each Pane, complete all as specified and as directed.

Supply only Sheet Glass, frosted, 4.0mm thick, Glazing in Wooden/Metal Frames and glazed with Beads or Oil Putty, area not exc. 0.50 SQM in Each Pane, complete all as specified and as directed.

Supply only Sheet Glass, Ordinary, 4.0mm thick, Glazing in Wooden/Metal Frames and glazed with Beads or Oil Putty, area exc. 0.50 SQM in Each Pane, complete all as specified and as directed.

S&F Stainless Steel Wire Cloth 0.56mm nominal dia of Wire and average width of aperture 1.18mm and fixed with Stainless Steel Wire Staples and fixed, complete all as specified and as directed.

S&F Stainless Steel Wire Cloth 0.36mm nominal dia of Wire and average width of aperture 1.40mm and fixed with Stainless Steel Wire Staples and fixed, complete all as specified and as directed.

S&F PVC (SWR) 110mm bore (dia) Soil, Waste and Ventilating Pipe, Single Socketed, in any length with Rubber Ring Joints, laid in Trenches or in Floors complete all as specified and as directed.

All as per Item no. 95 here in before but for 75 mm, complete all as specified and directed.

S&F PVC (SWR) 110 mm bore (dia) Bend any type, and jointing with Solvent Cement , complete all as specified and as directed.

All as per Item no. 97 here in before but for 75 mm, complete all as specified and directed.

S&F PVC (SWR) 110mm bore (dia) Vent Cowl, jointing with Solvent Cement and fixed, complete all as specified and as directed.

Supply & laying Steel Water Tubing 15mm bore (dia), galvanised, ‘medium grade’ with all Fittings, fixed on walls, ceiling or laid in floors or any other situation, complete as all specified and as directed.

All as per Item no.100 here in before but for 20 mm dia, complete all as specified and directed.

S&F Rotational Moulded Polyethene Water Storage Tank 250 Litre Capacity (Cylindrical, Vertical with Closed Top), 3 layered, hoisted and fixed in Position all as specified in MES Scheduleincluding wash out GI Pipe 32mm of 450mm length with stopper, complete all as specified and as directed. , complete all as specified and as directed.

S&F Rotational Moulded Polyethene Water Storage Tank 500 Litre Capacity (Cylindrical, Vertical with Closed Top), 3 layered, hoisted and fixed in Position all as specified in MES Scheduleincluding wash out GI Pipe 32mm of 450mm length with stopper, complete all as specified and as directed. , complete all as specified and as directed.

S&F Rotational Moulded Polyethene Water Storage Tank 1000 Litre Capacity (Cylindrical, Vertical with Closed Top), 3 layered, hoisted and fixed in Position all as specified in MES Scheduleincluding wash out GI Pipe 32mm of 450mm length with stopper, complete all as specified and as directed. , complete all as specified and as directed.

S&F 20mm Ball brass valves, high pressure,with polythene float and flynut complete, screwed for iron pipe or brass ferrule,complete all as specified and as directed.

S&F Factory made Solid PVC Door Frame of size 50x47 mm made out of 5.0 mm thick plain colour PVC Sheet reinforced with Mild Steel Square Tube and fixing in opening as per Specification and Drawing of MES Schedule Part-II, complete all as specified and as directed.

S&F Factory made Solid Panel PVC Door Shutter 30mm thick (Style) consisting of Frame made out of Mild Steel Square Tube for Top and Bottom Rails, mild steel Frame shall be covered with heat moulded plain colour PVC 'C' Channel having PVC Sheet Strip 20 mm wide stuck inside with Solvent Cement for Styles and plain colour PVC Sheet for Top Rail, Lock Rail & Bottom Rail on either side and as gap insert for Top Rail, Bottom Rail Panelling of plain colour PVC Sheet to be fitted in mild steel Frame welded/sealed to the Styles and Rails with suitable Sheet Beading and jointed together with Solvent Cement and fixing in the Frame at Site as per Specification and Drawing of MES Schedule Part-II, complete all as specified and as directed.

S & F false ceiling with 4mm thick desingner 'E' Board of Everest Ltd or Charminar as approved by GE fixed with GI powder coated inverted Tee or 'L' section (Concealed GI frame work) of cicago metallic or Equivalent as approved by GE suspended from ceiling with FI 25x5 mm thick or butterfly hold down clips with necessary hold fastners / self tapping screws as per manufacturer instruction complete all as directed and specified and as directed and including (a) Main runner of size 39x24.7x0.8mm (b) Cross tee size 29x24.7x0.8mm (c) Wall angle 22.2x22.2x0.65mm (d) Butter fly clip / hold down clip (e) Size of grid 605x605mm (f) Two coats oil bound distemper one side of board (g) Powder coating on exposed side of tee/angle

S&F Aluminium Handle 150mm long Cast type, complete all as specified and as directed.

All as per Item no. 109 here in before but for 125 mm, complete all as specified and directed.

S&F Aluminium anodised Barrel Tower Bolt 150 mm long, Extruded Section and fixed, complete all as specified and as directed.

S&F Mild Steel Butt Hinge of size 100mm, medium weight, cold rolled and fixed, complete all as specified and as directed

Supply only mild Steel Butt Hinge of size 100mm, medium weight, cold rolled and fixed, complete all as specified and as directed

S&F Stainless Steel Butt Hinge of size 100mm, medium weight, cold rolled and fixed, complete all as specified and as directed

M&L preparing newly plastered surfaces of wall and applying Three Coats of White Wash, complete all as specified and as directed

M&L preparing newly plastered surfaces of Ceiling and applying Three Coats of White Wash, complete all as specified and as directed.

M&L preparing new of Walls and applying Two Coats of Cement Base Paint over a coat of alkali resistant priming paint with cement paint, complete all as specified and as directed.

M&L for Cutting into existing manholes 150mm dia of internal pipe for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified and as directed.

M&L Salt-Glazed Stone-ware Drain Pipe 150mm bore (dia), Grade ‘A’, laid in Trenches, Jointed with Cement Mortar 1:1 and testing, complete all as specified and as directed.

All as per Item no.120 here in before but for 100 mm, complete all as specified and directed.

M&L for precast cement concrete block masonry with solid block exc 10 cm in width and setting in CM (1:4) PCC type C-1(1:3:6) (using 20 mm graded aggregate) complete all as specified and directed.

M&L for MS Bed Plate 6mm thick with sleeve pieces riveted or welded, complete all as specified and directed.

S & F of mild steel scew bolts 5 to 10 mm (Machine made) with hexagonal or squre heads at one end and screwed the other , or screwed both ends, each screw end to be fitted with washers and one hexagonal or squre nut , exc 5 cm to 10cm long complete all as specified and directed.

M&L Marble of green shade other than white and black, 18 to 20mm thick (table rubbed and polished) in steps, jambs,pillars, window cills, cocking platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

M&L Factory Made Second Class Hardwood 35mm thick Glazed and Skelton Shutters, open rebated and prepared to receive Glass, Gauze, etc. (without Sash Bars) edges of Framing plain, chamfered or rounded, mitred beads for screwing Glass, Gauge, etc. sizes of members of Shutter as speci fied in MES Schedule Part-I Section 8, Clause No. 8.24(a) and fitted to Wooden Chowkat, complete all as specified and as directed.

M&L Flush Door Shutter 40mm thick, Solid Core Construction with Block Board Core and Plywood face Panels commercial type on both side with Particle Board and fitted to Wooden Chowkat, complete all as specified and as directed.

S& F 2nd class Hardwoodsmall fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary' labours; articles n exc 200 cu. cm each, complete all as specified and directed.Note:- Butt hinge will be measured and paid as 'Supply only' under appropriate item.

S&F Mild Steel Barrel Tower Bolt 200mm long, Stove Enamelled Black with bright Bolt and fixed, complete all as specified and as directed.

S&F Mild Steel Sliding Door Bolt 300mm long, Plate type, Black Japanned Finish with bright Bolt not less than 12mm dia, minimum 6 Bolts and Nuts 4 on Bolt Plate 2 on Staple Plate and fixed, complete all as specified and as directed.

S&F Mild Steel Pressed Handle 100 mm, Oval type, Stove Enamelled Black and fixed, complete all as specified and as directed.

S&F in repair Ordinary Rat Tail 250mm, Rod Pattern Springs including Roller and Roller Plate and fixed, complete all as specified and as directed.

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., conforming to Fe 290-W (Gde E-165) quality A, drilled for fixing of steel sheeting or other covering Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening,complete all as specified and as directed.

M & L Screed Bed or Bedding Layer 15mm thick in Cement Mortar 1:6 for laying Floor Finishes/Tiles, complete all as specified and as directed.

M&L rendering 10mm thick in Cement Mortar 1:4 for laying vertical surface Finishes/Tiles, complete all as specified and as directed.

M & L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over cement, complete all as specified and as directed. NOTE : Screed Bed will be measured and paid separately under appropriate Item.

M & L for kota stone slab 20-25 mm thick in riser of step, skirting, and pillar laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing & incl necessary bull nosing complete all as specified and as directed. NOTE : Screed Bed will be measured and paid separately under appropriate Item.

M& L for preparation of new plastered or unplastered surfaces of walls and applying two coats of oil bound distemper over a coat of chalk whitening to distempering and priming, complete all as specified and as directed.

M& L for preparation of old plastered of walls and applying one coats of acrylic distemper on wall, complete all as specified and as directed.

M&L preparing new Ceiling board on any description and applying Two Coats of White Wash, complete all as specified and as directed

M&L preparing new Plastered Surfaces of Walls and applying Two Coats of distemper oil emulsion over a coat of primer complete all as specified and as directed.

M&L preparing old treated/decorated surfaces of Ceiling and applying One Coat of White Wash, complete all as specified and as directed

S&F powder coated aluminium anodised frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.

S & F Anodised aluminium window shutters,, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, handles, screws etc. complete all as specified and as directed. NOTE:- (i) Fixing of shutter with fitting shall be as per manufacturers instruction (ii) Rate quoted is deemed to be inclusive of aluminum hardwires as indicated, glazing clips, rubber packing, anodized aluminum snap on beading for fixing glass panes in frame, handles, Locking Arrangement but Glass panes in frame shall be measured and paid separately under respective Sch A items separately at Supply only rates)

S&F Anodised aluminium door shutters (Single/double shutter), aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing anodised aluminum snap beading handles in each door, hinges, handles, anodised snap beading screws, hold fast complete all as specified and as directed and as shown on drawings. NOTE:- (i) Fixing of shutter with fitting shall be as per manufacturers instruction (ii) Rate quoted is deemed to be inclusive of aluminum hardwares as indicated, glazing clips, rubber packing, anodized aluminum snap on beading for fixing glass panes in frame , handles,Locking Arrangement but Glass panes in frame shall be measured and paid separately under respective Sch A items separately at Supply only rates)

M&L Water Proofing Treatment on existing cleaned RCC Roof with the following Specifications, complete all as specified and as directed (a). Priming surfaces and applying normal treatment (for moderate conditions), using glass fibre base bitumen felt grade 2 (except felt) (b). M&L Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq. m over cleaned surface of any description. (c) S&F APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyester non woven fabric (wt not less than 150 gms/sqm) laid on primed surface by forced application complete all as specified. (d) M&L Applying two coats of Aluminium Paint over APP based Polymeric Membrane,complete all as specified and as directed.

M & L for Chequered cement concrete tiles 25cm x 25cm x 20-22mm thick, set, jointed and pointed in neat cement slurry in floors incl 15mm thick screed bed in CM 1:6, complete all as specified and directed.

S&F 40mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed (as approved) complete all as specified and as directed.

S&F 25mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed (as approved) complete all as specified and as directed.

S&F 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed (as approved) complete all as specified and as directed.

S&F PVC (SWR) floor trap, plain with grating, Diameter of outlet 75mm, including jointing with solvent cement complete all as specified and as directed.

S & F Brass Chromium Plated Soap Dish fixed to wall with Chromium plated Brass Screw, complete all as specified and as directed.

S&F Bib Tap 15mm bore (dia) long nose Fancy Type, Cast Copper Alloy, Chromium Plated with Crutch or Butter-fly Handle, screwed down, screwed for Iron Pipe or for Brass Ferrule and fixed, complete all as specified and as directed.

S&F Vitreous China White Squatting Pan, ‘Orissa’ Pattern of size 580x440 mm with Integral Foot Rests, ‘P’ or ‘S’ Trap, providing Joints between Flush Pipe and Socket of WC Pan incluiding provision of Lime Concrete Bedding and Making Good to Floor/distrubed surfaces and fixed, complete all as specified and as directed.

S&F Ball Valve 20mm dia (minimum Weight 210 Gram), high pressure of PTMT with epoxy coated Aluminium Rod and high density Plastic Ball, screwed for Iron Pipe and fixed, complete all as specified and as directed.

M& L for 3.00 M dia x 3.00 M effective depth soakage wells excavation, in any type of soil, foundation in PCC 1:3:6 type C2, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM 1:4,plaster where shown on drg shall be 12 mm thick in CM 1:6, RCC cover slab in M25/ SFRC cover, filling with brick bats of gauge 80 to 150mm, complete as all specified and as directed.

Supply laying and testing of 150 mm internal dia of double wall corrugated (DWC) high density polythylene pipe (HDPE) and stiffness classes 8 (SN-8) with ISI marked (With CML No ) with and including all fittings & jointing materials for sewage line and laid in trenches as specified in IS-16098-2013 part-2 complete all as specified and as directed. Make - Rex Polyextrusion Pvt Ltd/Jain irrigation System Ltd/Alom Poly extrusions Limited. Note :- Bedding of pipe shall not be provide in normal condition and construction methods shall be strictly complied as per clause No A-4 of Annex 'A' of IS 16098 Part II, complete as all specified and as directed..

M&L for Machine pressed Precast concrete interlocking paver block any shape and size confirming to IS15658-2006 of 60mm thickness M-35 Grade over and including 50 mm thick sand screed bed/cushioning etc. complete all as spd and directed.

M&L for precast cement concrete 1:2:4, type B1 ( using 20 mm graded crushed stone agg) solid blocks as in kerb stone of set and jointed in CM 1:4 incl excavation and earth work, removal etc complete all as spd and directed.

M & L DURASTONE Heavy duty tiles of size 300x300x8 to 9 mm thick as footpath set and jointed in neat cement slurry and pointed in grey cementcomplete all as specified and as directed.

S&F Sink with Drainage Board made of Stainless Steel l.0mm thick Kitchen or Laboratory Overall size 495mmx 420mm Bowl size 410x330x 160mm with Plugs, Washers and Wastes, etc. including bedding in Cement Mortar to Dwarf Wall or including fixing Cantilever Brackets and connecting Union to Pipe, complete all as specified and as directed.

S & F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised., width of flaps when open in 30mm complete all as specified and as directed.

M& L for Block boards, grade 2 quality,interior grade, decorative type with decorative face veneer on both face, complete all as specified and as directed..

S&F magnetic PVC catcher for kitchen cup board, complete all as specified and as directed.

S& F 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and as directed.

Supply & laying Steel Water Tubing 40mm bore (dia), Galvanised, ‘medium grade’ with all Fittings, laid in trenches or any other situation, complete as all specified and as directed.

Supply & laying Steel Water Tubing 32mm bore (dia), Galvanised, ‘medium grade’ with all Fittings, laid in trenches or any other situation, complete as all specified and as directed.

M&L for Cutting of existing GI pipe laid 50 mm dia for inserting Tees for new connection of 50 mm x 40 mm dia , complete as all specified and as directed.

M&L for connection pieces for inserting 25 mm GI pipe into 50 mm distribution mains , complete as all specified and as directed.

M&L for fixing GI plug into 40 mm distribution mains , complete as all specified and as directed.

M& L for forming Contraction (Dummy) joints 30mm deep x 10mm wide, filled with sealing compound, complete all as specified and directed.

M&L for cement concrete 1:2:4, Type-B0 (12.5mm graded stone aggrgate) as in filling in steel frame/roof kerbs or mud stops, rounded or chamfered on edges, complete all as specified and as directed.

M&L Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290.Gde-E-165 complete all as specified and directed.

S&F Mild steel, 1.25 mm thick plain blacksheet in wall cladding , steel gate and similar work, cut to size holes punched including round headed screws,clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted for welding seams including bending or turning p,mitred angles etc,complete all as specified and as directed.

Taking down carefully Copper/Aluminium Point Wiring (Light, Fan, Socket or Power) of any description on batten/conduit and making good disturbed surfaces of Ceiling, Walls, etc. in Cement Mortar 1:3 and providing Surface Treatment so as to match the existing Finishes, complete all as specified and as directed.

Taking down the existing unservicable main switch/ cut out/ DBs of any type/ capacity/ description as existing at site including making good the disturbed surfaces to match with the existing finishes all as specified.

M&L Point Wiring with 1.5 Sqmm Copper Conductor single core FRLSH PVC insulated Unsheathed 1100 Volt grade multi-stranded Cable drawn through and including PVC Casing and Caping high grade of suitable size and its Accessories, mounted on 1.22 mm thick Sunk Mild Steel Pressed Terminal Box of suitable size duly painted with red oxide metal primer fixing/ grouting sunken/surface as per Site requirement on Wall and making good in Cement Mortar 1:3 with 3.0mm thick bakelite hylem Sheet Top Cover for mounting Switches, Sockets, etc. including PVC FRLSH insulated and unsheathed Single Core multi-stranded Copper Conductor Cable of size 1.5 Sqmm Green in Colour as Earth Continuity Conductor connected to Common Earth and Earth dolly for One Light Point controlled by One 1-Way Switch 5 Amp, complete all as specified and as directed.

All as per Item no.177 but for One Ceiling Fan/Exhaust Fan Point controlled by One 1-Way Switch 5 Amp and Regulator, complete all as specified and as directed.

All as per Item no. 177 here in before but or One 3 Pin 5 Amps Switch Socket Outlet Point controlled by One Switch on Independent Board, complete all as specified and as directed.

Description all as per item No 177 here in before but using 2.5 sq mm single core copper conductor cable of multistranded FRLSH PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point incl running of 2.5 sq mm copper conductor FRLSH PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly, complete all as specified and as directed.

S&F Switch Piano, Flush type, Single Pole, 1-Way, 5 Amps, 240 Volt, conforming to IS and connecting up, complete all as specified and as directed complete all as specified and as directed.

S&F Switch Socket Combination 2-in-1, Flush type, multi-purpose, 2/3 Pin, 5 Amp, 240 Volt, conforming to IS and connecting up, complete all as specified and as directed.

S&F Switch Socket Combination 2-in-1, Flush type, multi-purpose, 3/5 Pin, 5/15 Amp, 240 Volt, conforming to IS and connecting up, complete all as specified and as directed.

S&F Ceiling Rose, Surface Bakelite of size 65x50mm, 3 Terminals, AC, 50 Hz, 240 Volts, conforming to IS and connecting up, complete all as specified and as directed.

S&F Lamp Holder Surface Bakelite with Back Plate insulated body suitable for Batten/Angle Fittings and fixed with PVC Block, conforming to IS and connecting up, complete all as specified and as directed.

S& F LED ADORE 10 W B22 CDL 5 STAR LAMP with B 22 base capacity 1200 lumen complete all as specified.Make-Make- Havells, Cat No: LHLDEUEBML8Z010 or equivalent in CG or Polycab.

S&F Sheet Metal Enclosure MCB DB, SPN, 4-way with 200 Amp rated Bus-bar, 240 Volt, Double Doors with Magnitic Locking System and connecting up, complete all as specified and as directed.

S&F MCB Double Pole, 20 Amps, 240/415 Volt for fixing on MCB DB’s, 10 kA,c curve 50 Hz, conforming to IS/IEC 60898 and connecting up, complete all as specified and as directed.(Make- L&T cat no. BB20320B or equivalent in schinder/Legrand.)

S&F Sheet Metal Enclosure MCB DB, SPN, 8-way with 200 Amp rated Bus-bar, 240 Volt, Double Doors with Magnitic Locking System and connecting up, complete all as specified and as directed.Make:- Legrand/L&T

S&F MCB SP,6-32 Amps, 240 Volt for fixing on MCB DB’s, 10 kA,c curve 50 Hz, conforming to IS/IEC 60898 and connecting up, complete all as specified and as directed.(Make- L&T, Cat No: BB10060B/Schinder & Legrand.)

S&F MCB Double Pole, 20 Amps, 240/415 Volt for fixing on MCB DB’s, 10 kA,c curve 50 Hz, conforming to IS/IEC 60898 and connecting up, complete all as specified and as directed.(Make- L&T, Cat No: BB20320B, Schinder & Legrand.)

S & F wall mounted LED 18 watts , box type (decorative) light fitting, 230 volts with extruded aluminium heat sink provided for efficient heat dissipation and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED tube 4' x 18 watts complete all as specified and as directed. Make-Model -REGALBATTENT5UPTO1X18WDSBSWH For Batten Fitting and Model-PHOTONULTRAE2.01213T8SSTL18WLED865SPC For T8 Tubelight ,Make Havells, or equivalent in CG, Polycab.

S & F Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 25 watts with pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting and GI pipe bracket made out of GI pipe medium grade 32 mm dia 1.5 mtr long bend to required shape complete all as specified and as directed.Make-Havells,Model No - ENDURAPEARLSL25WLED757SASYTOPCMP Or Equivalent

Supply & laying LT UG XLPE sheathed PVC insulated, screened PVC bedded, Galvanised Steel Strip of Wire armoured Electric Power Cable heavy duty with stranded Aluminium Conductor 1100 Volt grade, cross-sectional area 16 Sqmm 2.00 Core, laid in trenches /surface of Wall/in GI Pipe along with Pole including Brass Cable Glands Mild Steel Flat Iron Clamps, etc. including making good to the damaged surfaces to match as per existing surfaces, complete all as specified and as directed. NOTE : Earthwork, Horizontal Boring Road/ Foot Path, Cable Protection Pipe, Cable Joint, Mild Steel Clamps, Nuts & Bolts, etc. for fixing of Cable Protection Pipe with Pole, Wall, etc.(as required) will be measured and paid for separately under appropriate Items.

S&F Sub-Class ‘B’ Brick, well burnt, laid breadth-wise along the length of Cable laid in Trenches over Sand Cushion laid for UG Cable Protection, complete all as specified and as directed.

M&L Sand Cushioning (dry) in trenches/ducts for protection of UG Cables (below, above and around the UG Cable laid in Trenches) of 230mm Spread thickness (8 Cm in depth before laying Cable and 15 Cm in depth after laying the Cable) and consolidated (punned) upto 180mm thickness, complete all as specified and as directed. NOTE : Only Punned thickness of Sand Cushioning will be measured for Payment.

Supply & laying Steel Water Tubing 40mm bore (dia), Galvanised, ‘light grade’ with all Fittings,in protection of cable at road crossing/hard standing/pole protection fixed with clam as per site or any other situation, complete as all specified and as directed.

S&F Testing Exhaust Fan of 300 mm sweep,1400rpm AC single phase 240 Volts Heavy Duty with louvres including provision of 3 core PVC insulated PVC sheated 3 core multistranded copper conductor cable of size 23/ 0.193 from ceiling rose to fan terminal, including necessary cutting of wall and making good the distrubed surfaces of wall and matching existing colour of wall, complete all as specified and as directed. Make:- USHA/Havells.

M&L Earthing with Galvanised Steel Earth Plate Electrode 600x600x6mm, buried directly in ground vertically to a depth not less than 2.25 Metre below Ground Level with Top Edge of Earth Plate at depth not less than 1.50 Metre below normal Ground Level, connected to Galvanised Earth Lead Wire 6.0 mm dia by means of Bolts, Nuts, Check Nuts and Washers of GI or Steel and Earth Wire protected with and including GI Pipe 15mm bore (dia) ‘light grade’ upto 1.0 Metre above the Floor Level of Building where Main Switch/DB situated, Earth Plate surrounded by a packed thickness of Char Coal or Coke Dust mixed with Common Salt in alternate layers of not exc 150mm thick PCC Pit in Cement Concrete 1:3:6 (20 mm graded aggregate) and Pre-cast RCC Cover Slab of size 350x350x50 mm in Cement Concrete 1:2:4 (20mm graded aggregate), reinforced with 8mm dia TMT Bars @ 100mm Centre to Centre in both ways, GI Wire Mesh, Funnel with GI Watering Pipe 20mm bore (dia) ‘medium grade’ including necessary Excavation in Soft/Loose Soil, Returning, Filling in and Removal of surplus Spoil upto a distance of 50.00 Metre and all as shown in Electrical Plate No. 3 of MES Schedule Part-I and Testing on completion, complete all as specified and as directed.

Supply & laying Steel Water Tubing 25mm bore (dia), galvanised, ‘medium grade’ with all Fittings ,laid in trenches,under road,under floor or in air for connection of pumping installation, complete as all specified and as directed.

M&L Cutting of existing CI pipe laid 80 mm dia for inserting Tees for new connection of 25 mm dia complete as all specified and as directed.

M&L for GI connection pieces for inserting 25 mm GI pipe into 80 mm distribution mains complete as all specified and as directed.

M/S Krishna Construction Co.

bkgeneralstores

Sunrise Enterprise

M/S RANA ENGINEERING ENTERPRISE

Markson