Loading
Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹15,600
Closing Date
17 Aug 2026, 9:30 pmClosed
Karnataka Power Corporation Limited
EE PURCHASE
Procurement of Different types of Valves for CAM-1 of RTPS
KPCL/2026-27/IND2833
KPCL/2026-27/IND2833
Open
Two Tender Document System(Two Cover)
KPCL Executive Engineer Purchase Office RTPS Raichur
7 documents required · 4 mandatory · 3 optional
a)For Manufacturers: The intending bidder shall have successfully supplied Valves to any government sector/PSU/Major power plants/Reputed private sector major industries amounting to not less than Rs 12.48 Lakhs (Rs 6.24 Lakhs) in any one year of the preceding three financial years i.e. 2023-24, 2024-25 & 2025-26 (2 year for Micro and small Enterprises i.e. 2024-25 & 2025-26).As a proof purchase order copies (Single/Multiple (max.3)) for any one of the said financial year during which supplies are made shall be uploaded.b) For Authorised representatives/ dealers/ Suppliers etc: The intending bidder shall have successfully supplied Valves to any government sector/PSU/Major power plants/Reputed private sector major industries amounting to not less than Rs 4.68 Lakhs in any one year of the preceding three financial years i.e. 2023-24, 2024-25 & 2025-26
The intending bidder shall be Manufacturer/Authorized dealer/Supplier of Valves. As a proof bidder shall upload valid registration certificate/dealership certificate issued by the Competent Authority/ relevant documents in e-portal.
The average annual financial turnover of the tenderer should be not less than Rs 15.60 Lakhs (Rs 7.80 Lakhs for Micro and small Enterprises) during the last 3 preceding financial years i.e., 2022-23, 2023-24 & 2024-25 (last 2 preceding financial years respect to Micro and small Enterprises i.e., 2023-24 & 2024-25). As a proof the bidder shall upload the certified copy of the Annual turnover certificate/Profit & Loss statement duly certified by the Chartered Accountant.
₹500
₹15,600
1 Aug 2026
1 Aug 2026
18 Aug 2026
10 Aug 2026
Sno Item Code Item Name Specification Unit Qty Brand offered % GST Included HSN Bidders compliance
1 270134111R GATE VALVE (100 NB) Raising Stem Manual,Hand Wheel Operated GATE V/V, Cast Steel A 216 Gr WCB GATE Valves to Class-150#BS-1414 / API 600 Std.Bolted Bonnet , Outside Screw & Yoke Type With 13% Cr Stainless Steel Rising Spindle & SS Trim / InternalsFlanged ends as per ANSI B 16.5 Cl-150 RF liquid handled RAW water /Air.BDK/AUDCO (L&T)/FORESS/KSB or equivalent. NUMBERS 5
2 274110003R BALL VALVE SIZE: 15MM CAST STEEL A216 Gr WCB BALL VALVE TO BS 5351 STD.CLASS-150.WITH SS MATERIAL Ball WITH TEFLON SEATING, MANUAL LEVER OPERATED,3 PIECE DESIGN.BOTH SIDE THREADED END. Working Media :Air/RAW WATERWorking Pressure/Temp. :8Ksc./50-60deg.C.SS BALL VALVE -15MM SIZE, , 150 CLASS, DESIGN WITH SECREWED END, MAKE: LEADER//AUDUCO/FOURESS/BDK or Equivalent. NUMBERS 15
3 274145405R BALL VALVE, SIZE: 25 MM. CAST STEEL A216 Gr WCB BALL VALVE TO BS 5351 STD.CLASS-150.WITH SS MATERIAL Ball WITH TEFLON SEATING, MANUAL LEVER OPERATED,3 PIECE DESIGN.BOTH SIDE THREADED END. Working Media :Air/RAW WATERWorking Pressure/Temp. :8Ksc./50-60deg.C.MAKE: LEADER//AUDUCO/FOURESS/BDK OR EQUIVALENT. NUMBERS 15
4 274232408R BALL VALVE -50 MM CAST STEEL A216 Gr WCB BALL VALVE TO BS 5351 STD.CLASS-150.WITH SS MATERIAL Ball WITH TEFLON SEATING, MANUAL LEVER OPERATED,3 PIECE DESIGN.BOTH SIDE THREADED END. Working Media :Air/RAW WATERWorking Pressure/Temp. :8Ksc./50-60deg.C.MAKE: LEADER//AUDUCO/FOURESS/BDK OR EQUIVALENT. NUMBERS 20
5 274777205R BALL VALVE 25MM FOR SULPHURIC 25mm BALL VALVE FOR ULPHURIC ACID, MAKE:AKAY "CHEMFLOW" FULL BORE BALL VALVE,tYPE:BV399 2 PIECE DESIGN BODY IN ASTM A 351 GrCF 3M BALL & STEM IN SS C421 SEAT IN PTFE SEAL BODY & STEM IN GRAFOI,LEVER OPERATED, BOLT & NUTS IN B7/2H VALVES DESIGNED TO BS-EN 17292 FLANGED END CLASS 150RF SIZE-25MM. NUMBERS 15
6 274777207R BALL VALVE 40MM FOR SULHURIC AKAY MKE CHEMFLOW FULL BORE BALL VALVE, TYPE:bv 300 2PIECE DESIGN BODY IN ASTM A351 Gr3M Balland Stem in SS C421 seat in PTFE SealCBody & Stem in Graful. Lever operated, bBolts and Nutsin B7/2H valves Designed to BS-EN 17292, flanged end class 150 RF Size 40MM. NUMBERS 15
7 274938105R 25 NB DIAPHRAGAM VALVE FLANDE TO FLANGE DISTANCE 125MM.,DIAPHRAGM VALVE S-SERIES, RATING PN10, END CONNECTION: FLANGED END FLAT FACE, END DETAIL: BS10 TABLE-D, OPERATION: HAND WHEEL, BODY MATERIAL: CI-IS:210, BONNET MATERIAL: CI-IS:210, STEM MATERIAL: ASTM A276 TYPE 410, BODY LINING: NATURAL, DIAPHRAGM MATL: NEOPRENE, BONNET TYPE: STD BONNET STEAM TYPE: INDICATING STEM, COMPRESSOR MATERIAL: CI-IS:210, STEM BUSHING MATERIAL: SG-IRON-IS:1865GR:500/7, STEM BUSHING TYPE: INDICATING STD. NUMBERS 35
8 274938107R 40 NB DIAPHRAGM VALVE FLANGE TO FLANGE DISTANGE: 165MMBDK MAKE DIAPHRAGM VALVE 'S'-SERIES RATING - PN - 10, END CONNECTION FLANGED END FLAT FACE, END DETAIL - BS 10 TABLE - D, OPERATION: HAND WHEEL, BODY MATERIAL: CI-IS 210, BONNET MATERIAL: CI-IS 210, STEM MATERIAL - ASTM A 276 TYPE 410, BODY LINING: NATURAL, DIAPHRAGM MATERIAL: NEOPRENE BONNET TYPE - STD BONNET STEM TYPE, INDICATING STEM, COMPRESSOR MATERIAL - CI-IS: 210, STEM BUSHING MATERIAL: SG - IRON - IS 1865 GR-500/7, STEM BUSHING TYPE INDICATING-STD. NUMBERS 20
9 274938109R 65 NB DIAPHRAGM VALVE FLANGE TO FLANGE DISTANCE: 222 MM.DIAPHRAGM VALVE 'S'-SERIES RATING - PN - 10, END CONNECTION FLANGED END FLAT FACE, END DETAIL - BS 10 TABLE - D, OPERATION: HAND WHEEL, BODY MATERIAL: CI-IS 210, BONNET MATERIAL: CI-IS 210, STEM MATERIAL - ASTM A 276 TYPE 410, BODY LINING: NATURAL, DIAPHRAGM MATERIAL: NEOPRENE BONNET TYPE - STD BONNET STEM TYPE, INDICATING STEM, COMPRESSOR MATERIAL - CI-IS: 210, STEM BUSHING MATERIAL: SG - IRON - IS 1865 GR-500/7, STEM BUSHING TYPE INDICATING-STD. NUMBERS 15
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
SC_405.docx
Others - Special condition • 0.01 MB
catalogue_items_06.xlsx
Others - Technical spec • 0.17 MB
Declaration.docx
Others - Declaration • 0.01 MB
tender document_final.doc
Tender Document • 0.07 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .