Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹23.3 LAccepted-AOC | L1 | Accepted-AOC Due to lowest accepted | |
| 2 | L2₹24.8 L+₹94,370 (3.96%)Rejected-Finance | L2 | Rejected-Finance Other than lowest |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
25 Jun 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer Ludhiana
Garrison Engineer Military Engineer Services Near Jagroan Bridge CG Complex Ludhiana-141001
REPAIR TO CERTAIN BLDGS WORKS AT CG COMPLEX DORAHA AND PHILLOUR UNDER AGE B/R GE LUDHIANA
2022_MES_527100_1
GE/LDH-20/2022-23
Open Tender
Civil Works
Item Rate
270 days
CG Complex Doraha Phillour under GE Ludhiana
As per NIT and Tender Documents
9 documents required · 9 mandatory
₹500
GE Ludhiana
₹60,000
Yes
21 Jul 2022
28 May 2022
27 Jun 2022
28 May 2022
25 Jun 2022
11 Jun 2022
28 May 2022 - 10 Jun 2022
60 days
Amount
Demolition of cement concrete (unreinforced) concrete in ground floors and paving n-exc 15cm thickness ( below or above ground floors.)
M&L for 75mm thick cement conc one 1:3:6 type C2 using 40mm graded stone aggregate as in plinth protection joint filled with bitumen sand mixer finished even and smooth without using extra cement.
M&L for 40mm thick cemnt concrete type B-1, 1:2:4 (using 20 mm graded aggregate) as in floorings , finished even and smooth without using extra cement complete all a specified and directed laid in alternate bay
M&L for 25mm thick cement concrete type B-O, 1:2:4 (20mm graded agg ) as in flooring finished even and fair.
M&L for non skid ceramic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile 0.06 Sqm but n.exc 0.11 Sqm, in neat cement slurry and pointed in white or coloured cement with pigment to match over 15mm thick screed bed in cement mortar (1:6) all as specified and directed.
M&L for non skid ceramic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile 0.11 Sqm but n.exc 0.18 Sqm, in neat cement slurry and pointed in white or coloured cement with pigment to match over 15mm thick screed bed in cement mortar (1:6) all as specified and directed.
M&L for vitrified ceramic tiles Light shade 10mm thick square/rectungular polished area of each tile not exceeding 0.36 Sqm in floor etc set and jointed in neat cement sluarg and painted in white or coloured cement to match laid over 20mm thick screed bed of cm 1:6 complete all as specified and directed by Engineer-in-Charge.
M&L for endura ceramic tiles 30cmx 30cmx 10mm thick,set, jointed & pointed in neat cement slurry in floors with grey cement and pigments over & including 20mm thick screed in cement mortar 1:6 cement complete all as specified and directed by Engineer-in-Charge.
M&L for 60mm thick paver block with grey cement and no pigment of any size and shape conforming to IS 15658-2006,M-35 grade as approved by EIC laid in flooring and joints filled/broomed with fine sand
M&L for sand filling under floors or in foundation incl watering and consolidation.
M&L for chequered cement concrete tiles 20cmx 20cmx 25mm thick,set, jointed & pointed in neat cement slurry in floors with grey cement and pigments over & including 15mm thick screed in cement mortar 1:6
Dismantling floor hearth or wall tiling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish off the premises .
All as per item No 6 above but as in skirting over rendering 10mm thick in cement mortar 1:4.
All as per item No 7 above but as in skirting over rendering 10mm thick in cement mortar 1:4.
M&L for glazed ceramic coloured tiles ( 350x250mm) x 7mm thick on vertical surfaces etc, set and jointed in neat cement slurry and pointed in white cement to match the shade of tile over 10mm thick rendering of in cement mortar 1:4 complete all as specified and directed.
M&L for glazed ceramic coloured tiles (450x350mm) x 7mm thick on vertical surfaces etc, set and jointed in neat cement slurry and pointed in white cement to match the shade of tile over 10mm thick rendering of in cement mortar 1:4 complete all as specified and directed.
Dismantling Stone slabs and tiles of any description or thickness in floors,aprons etc.laid bedded and pointed in any mortar complete.
M&L for machine cut kota stone 20-25mm thick as in slab, flooring & tread of steps over 20mm thick cement screed bed in cement mortar 1:6 laid and jointed with grey cement slurry mix with pigment to match the shade of slab including rubbing and polishing complete all as specified.
All as per item No 18 above but in riser of steps, skirting & dado laid over 10mm thick cement screed in CM 1:4
M&L for granite 20mm thick(table rubbed and polished) in cooking plateform and like in cement mortar 1:4 including pointing in white cement(1:2) using marble dust making holes in RCC shelves suitable for gas pipe with round edges where required complete all as directed.
M&L for grubbing up bushes, tree truck of trunk portion nexc 10cm grith including cutting of trees/bushes grown in over wall and roofs diging out roofs and making good distance area of wall/roofs with PCC 1:3:6 type and using 20mm graded stone aggregate complete all as specified and directed by Engineer-in-Charge.
Demolition for cement conc exc 15cm thickness but above ground floor as sunken floor .
M&L for cement concrete type E - 2, 1:5:10 (using 40 mm graded brick aggregate) as in sunken flooring complete all as specified and directed by Engineer-in-Charge.
M&L for applying two coats of SHALIMAR SUPERCRETE/NITOBOND water proofing coating on the entire surface of sunken portion all as specified .
M&L for 15mm thick cement screed in CM 1:3 admixed with integrd water proofing compound FOSROC’s complast X 421 IC @ 130ml per bag of cement incl a bonding coat of FOSROC”s Nito bond AR cement slurry/STP NO 1 liquid @ 200ml per bag of complete all as specified.
M&L for PCC (1;2:4) type B-1 using 20mm graded stone agregete as in sides of rounded or chamfered on edges of sunken floor
S&F for 32mm dia G I pipe 450mm long beveled cut at both ends by making hole in walls sunken portion approx above the R C C slab and ceiling finished the hole with cement plaster 1:2 to match with existing surfaces complete etc.
Dismantling boarding any description and in any position fixed with nails.
M&L for 4 mm thick E -classic board tiles as in ceiling tiles 600x600mm x4mm thick fixed with 3.15mm dia G I suspenders @600x600 c/c both ways including necessary galvanised iron powder coated frame work at size 28x24x0.9mm thick main and supplimentray joint and 24x24x0.9mm thick angle at corners .(Modal E-Board classic of Everast )
Taking down or up steel tubing and connections inculding cleaning for refixing or removal to store 15mm bore
Taking down or up steel tubing and connection s inculding cleaning for refixing or removal to store 20mm bore .
S&F for tube 'medium grade' galavanised, with all fitting and fixed complete to walls and ceiling etc 15mm bore complete all as specified.
All as per item No 32 above but 20mm bore.
Refixing old steel tubing and connections in new or old postion (wall, ceiling , floors ,etc) 15mm bore.
All as per item No 34 above but 20mm bore.
S&F in repairs Bib taps chromium plated fancy type, cast copper alloy with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule and fixed in repair 15mm bore complete all as specified.
Cutting chases, pinning in, making good to facing where reqd and pointing in CM 1:3 to ends of edges of landing etc and cutting chases for concealed water tubing and making good cutting exc 10 cm but n.exc 20 cm girth complete all as specified.
S&F for stop cock fancy type chromium plated with long shank and cup(Concealed type) screwed down high pressure with crutch or butterfly handle screwed bot ends for iron pipe or for union and fixed 15mm bore fixed in repair complete all as specified.
S&F for stop cock fancy type chromium plated with cast copper alloy screwed down high pressure with or without lattered hot and cold with long screwed shanks and fly nuts fixed in repair 15mm bore complete all as specified.
All as per item No 39 above here in before but angle valve.
S&F as in repairs Pillar taps, cast copper alloy, with capstan head chromium plated screwed down high pressure with or without lattered hot or cold with long screwed shanks and fly nuts screwed for iron pipe 15mm bore complete all as specified.
S&F for PVC connection 15mm bore size with PTMT nuts of length 45cm long.
S&F as in repair Brass chromium plated shower rose 125mm complete..
S & F as in repair Ball valve 20mm high pressure of PTMT with epoxy coated Aluminum rod & high density plastic ball screwed for iron pipe or brass ferrule complete.
Fixing only 20mm bore Ball valve high pressure of PTMT with epoxy coated Aluminum rod & high density plastic ball screwed for iron pipe complete.
S&F for 20 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed complete all as specified.
S&F for 15 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed complete all as specified.
S&F for brass chromium plated tubular towel rail 20mm dia(D) type 60cm long between flanges complete all as specified.
S&F for 32mm dia waste pipe for WHB
S & F in repairs brass chromium plated jet for pedestal pattern water closet including PVC flexible pipe alongwith complete necessary fittings all as specified and directed by the Engr- in- Charge.
S & F for PVC (SWR) Floor trap of 75 mm outlet plain with grating including jointing with solvent cement.
S&F for bib taps , cast copper alloy with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule and fixed in repair 15mm bore.
S&F for bib tap standard or PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm 90gms/20mm-125gms) fixed in repair 15mm bore.
S&F in repairs Chromium plated grating 125mm dia circular of approved make and fixing with cement mortor 1:3 on Nahani trap or floor trap.
S & F for waste coupling of PTMT (half or full threaded) 32 mm dia.
S&F for rotational moulded polythene water storage tanks(cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I 500 ltr capacity incl dismantling water tanks and removing to store.
S&F for rotational moulded polythene water storage tanks(cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I 1000 ltr capacity incl dismantling water tanks and removing to store.
S&F for PVC valveless syphonic action type flushing cistern, low level white with inlet ball valve flaot and handle including brackets. 10 ltr capacity in repair.
S&F for plastic water closed seat white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium plated or aliminished hinging device fixed in repair.
S&F for viterous china wash down water closet pan(pedestal pattern) white (excluding fixing bolts, flushing cistern and floor pipe) fixing in repairs EWC.
S&F in repair vitreous china washbasin, white, flat back, size 550 x 400mm, including brackets & incl 32mm bore CP waste coupling and incl provn of 15mm bore pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure with or without lettered hot or cold with long screwed shanks and fly-nuts flange end bedded in red lead cement and other end fixed
S&F for viterous china squartting pan orrisa pattern , size 580x 440mm white, interged foot rest including connection to trap and to flush pipe, anti syphonic pipe etc complete making good to floor fixed in repair.
S&F for vitreous china urinal,bowl type size of 465x355x265mm (back or corner wall type) complete incl providing and fixing plugs beding urinal against wall in cm 1:2 security urinal plug with and incl 60mm long brass screws pointing around urinal back in cement fixing automatically flushing cistern with bracket, flush pipes grating and union for discharge pipe fixed in repair complete.
S&F in repairs stainless steel kitchen plate rack fixed in wall having overall size 600mm X 750mmX 250mm complete. ( Cat No.P-330: Make Prayag or equivalent)
S&F in repair stainless steel sink with draining board made of 1.00mm thick sheet for kitchen with plugs , washers waste pipe including bedding in cement mortar to dwarf wall or including fixing cast iron cantilever bracket connecting union overall size 915mmx 460mm with bowl size 410mm x330mm x160mm complete all as specified and directed.
S&F in repair stainless steel sink made of 1.00mm thick sheet for kitchen with plugs , washers waste pipe including bedding in cement mortar to dwarf wall or including fixing cast iron cantilever bracket connecting union overall size 485mmx 420mm with bowl size 410mm x330mm x160mm complete all as specified and directed.
S&F in repairs coloured PVC toilet cabinet of size 450x450x90mm with looking mirror in replacement of existing looking mirror/woodencabninet and repairing the disturbed surfaces to match with existing.
Hacking out old broken glass(any thickness size quality or description) from wooden or steel frame glazed fixed with putty or fixed with beads etc.
S&F for sheet glass ordinary quality and glazing with oil putty in square nexc 0.5 Sqm Each pane 3mm thick.
S&F for sheet glass frosted, 3 mm thick in squares exc 0.5 sq. m each pane
Taking down chowket or frame with shutter(without taking off shutter from frame) exc 1.5Sqm and nexc 4Sqm.
All as per item No 72 above but n -exc 1.5 Sqm Each.
Taking down shutter of any description exc 1 Sqm but not exc 2Sqm Each etc.
Taking down shutter of any description exc 1 Sqm but not exc 2 Sqm Each refixing in same opening.
S&F for framed work as in doors or gates ,coolers stand of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings etc confirming to Fe 410-s . (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete
S&F for pressed steel frames,size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. complete ,as specified.
S&F for pressed steel frames,size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. complete ,as specified.
M&L for providing cement concrete type C-0 1:3:6 (12.5 mm graded agg) as for pressed steel chowkhats.
S&F for solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet rein forced with M.S. square tube supplying and fixing in opening as per specification and drawing.
M&L for Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded plaincolour PVC© channel PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock and bottom rail on either side as gap insert for top rail and bottom rail. Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded. Sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement supplying and fixing in the frame at site as per specification and drawing.
S&F for factory made 35mm thick panelled shutter (Any no of planel) 2nd class hard wood rail & style with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of the rail and stile as per IS:1003 (Part I), kiln sseasoned and chemically pressure treated
S&F for 35mm thick Glazed and skeleton shutters 2nd class HW open rebated and prepared to receive (glass) gauze (without sash bars) edges of framing plain chamfered or rounted fitted with cut and mitred beads for securing gauze (glass) etc size of members of shutters as specified.
Resecuring or easing and adjustment without taking down the shutters of any description exc 1 Sq.m and n.exc 2 Sq.m each complete all as specified and as directed by the Engineer-in-Charge.
S&F for butt hinges, medium weight cold rolled mild steel and fixed 100mm long.
S&F for aluminium anodised barrel tower bolts of extruded section and fixed 200mm long
S&F for aluminium handles cast type anodised 150mm long.
S&F in repair door helical spring mild steel 300mm, ordinary rat tail rod patteren including roller and roller plate complete.
S&F for aluminium alloy anodised sliding door with hasp staple(bolt type) and fixing clips of sheet cast or extruded section and fixing bolt and sliding bolts of extrudedsection or cast aluminium alloy and fixed 250mm long.
S & F in repair steel window 1.25 mm thick box type (primer coated) ERW hollow P section of size 60mmx25mm single rebated comprises gauged skeleton shutter ERW sec 50mmx20mm and 1mm thick with two openable leaf consisting two Nos sash bars of T-section 20mmx3mm complete welded to frame with one verticle mulion of ERW box type T-section of size 60mmx25mm and 1.25mm thick incl cutting holes and making good dismantled portion PCC (1:2:4) type B-1 four Nos for Each window) including following fittings welded to frame shutter: - (a) Hold fast, 150mm long of 12mmx3mm made to shape-04 Nos per window. (b) Handle of z section 20mmx25mm, 100mm long 01 Nos per leaf (c) MS tower bolt 150mm long-2 Nos per leaf (d) z section 20mmx25mm, 100mm long stopper - 01 No per leaf (f) MS pintal hinges of size 75mmx12mm- 2 Nos per leaf (g) Fabrication & fixing arrangement as per Drg No CEJZ/TD-06/07. make/manufacture by 1. M/S Tee Pee enterprises, Amritsar 2. M/S Ram Fabricator 'P' ltd Panchkula. Note: wire mesh and painting shall be measured & paid separately under appropriate item.
All asper item No 90 above but glazed .
S & F for steel window 1.25 mm thick with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded all as specified.
S & F steel window 1.25 mm thick with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded all as specified.
S&F for framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0
S&F for glavanised Mild steel wire cloth. 0.56mm nominal dia of wire and average width of aperature 1.18mm and fixed with tinned tacks or galvnaised wire staples.
All as per srl item No 95 above but for steel windows/wooden shutters including taking out old/rusted wire cloth from wooden shutters or steel windows either cutting or taking out galvanised wire staples and provisioning/securing the wire cloth to steel windows as per existing specification.
Taking down curatain rods along with wooden pallmate laid on wall.
S&F in repair curtain rod made out of mild steel 25mm dia(outer dia) pipe having thickness 0.63mm , PVC coated and colour/pattern, over all dia 28 to 29 mm complete all as specified and directed, Make :- Aerolux/MEC.
S&F for plastic finial of 28 to 29mm bore, decorated type, of any colour/pattern, best quality to suit the curtain rod and fixed at the end of curtain rod with suitable adhesive complete all as specified and directed, Make:- Aerolux/MEC or VISTA
S&F for mild steel prepainted bracket to hold the curtain rod and fixed to wall(Concrete/brick masonry) with the help of 2 Nos 50mm long steel screws and rawl plug included drilling with electric drill and making good the disturbed surfaces complete all as specified and directed.
Dismantling boarding any description and in any position fixed with nails.
S&F for 18/19mm block boards grade 1 quolity, exterior grade, decorative type with decorative face veneers on both faces and fixed to timber frame work with screws or hinges.
M&L for 2nd class HWPlain fillets.square,rectangular or triangular in section, exc 13 & nexc 23 sqcm, clean sawn, secured with nails or brads complete.
Dismantling of Asbestos cement (corrugated, semi corrugated etc.) sheets in roof coverings.
M&L for 6mm thick asbestos cement, corrugated of semi corrugated sheets in roofs, walls etc. fixed with L-type or J-type or cranked hooks bolts.
M&L for Asbestos cement two piece adjustable plain wing ridge closed fitting corrugated sheets.
All as per item No 106 above but except sheets
S&F for pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.
S&F for pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
S&F for roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc conforming to Fe 290 (Gde E-165) quality A all as specified and as directed by Engr-in-Charge.
Dismantling brick tiles or terracing tiles sinlge layer on roofs.
Demolition of mud in roofs any thickness including plastering and leeping(whether full thickness removed or only a part there of)
M &L for PCC 1:2:4 type B-1 as roof padding concrete to bring the extg slab in slope of 1:40. complete all as specified.
M&L for APP based polymeric membrane min weighing Kg/ Sqm and min mm thick reinforced with polyester non voven fabric (wt not less than gms/ Sqm) laid on primed surface by forced application complete all as specified
M&L for priming surfaces and applying normal treatment (for moderate conditions) using bitumen primer @ .30 Kg/Sqm applied hot.
M&L for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2kg per sq.m incl cleaning surfaces.
M&L for 40mm thick brick tiles laid on Screed bed of cement mortar (1:4) 15mm thick finished even and fair and joints grouted flush in cement mortar 1:3 mixed with 5% 0f crude oil by weight of cement
All as per item No 117 but except tiles after clening and removing old mortar from bricks
M&L for flush pointing in cement mortar 1:3 to brick tiles laid flat on roofs
M&L for cement concrete 1:2:4 type B-1 using 20mm graded stone agg as in coping, benching,roof kerbs or mud stops, rounded or chamfered on edges and throating as directed .
Taking down eaves gutter and rain water pipes (of any size and patern), incl all fittings and, heads, shoes, bends, swan-necks, etc incl cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accesaries)
S & F for 110 mm bore PVC (SWR) Soil, waste and vent pipes double socketed in any length with rubber ring joints fixed to walls complete.
S & F for 75 mm bore PVC (SWR) Soil, waste and vent pipes double socketed in any length with rubber ring joints fixed to walls complete.
S & F for 110 mm bore PVC (SWR) bends of any radius.
Demolition of brick built in cm including all quoins arches pillars etc.
M&L for brick work with sub class 'B' bricks straight or curved in plane exc 6cm mean radius built in cm 1:6.
All as per item No. 126 here-in-before but except bricks. (Old serviceable bricks retrieved during demolition shall be re-used after cleaning).
Taking down cement plaster on brick or stone walls etc including raking out joints hacking for key scrubbing down with water etc.
M&L for 15mm thick plastering on fair faces of bricks or cone surfaces finished even and smooth w/o using extra cement in cm1:6.
M&L for 5mm thick plastering on fair faces ofr cone surfaces finished even and smooth w/o using extra cement in cm1:3 on ceiling .
M&L for 15mm thick plastering on fair faces of bricks or concrete surfaces finished even and smooth w/o using extra cement in cm1:4.
M&L for two coats of Oil bound distemper over a coat of chalk whiting on wall surfaces inclduing prepration of newly plastered surfaces.
M&L for preparing of new surface of plaster and applying three coats of white wash on ceiling.
M&L for preparing of new plastered surface and applying two coats cement base paints on walls.
M&L for complete removal of existing treatment and applying two coats of cement base paint of walls.
M&L for complete removal of existing treatment and applying two coats of Oil bound distemper over a coat of chalk whiting on wall surfaces inclduing prepration
M&L for prepration of newly untreated wooden surfaces & two coats of synthetic enamel painting on wooden surfaces over a coat of pink primer including complete all as specified and directed.
M&L for preparation of old painted wooden surfaces of any description not other wise described over 10cm width or girth and applying one coat (finishing coat) of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge
M&L for two coats of synthetic enamel paint over a coat of red exide including preparation of new steel surfaces of any description over 10cm in width or grith not other wise described complete all as specified and directed.
M&L for one coats of synthetic enamel paint including preparation of old steel surfaces of any description over 10cm in width or grith not other wise described. Complete all as specified and directed.
Demolition on reinforced cement concrete of any description and in any position not otherwise specficially provided for.
M&L for precast cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in landings, manhole covers and similar articles and set in cm 1:4 incl necessary formwork and cleaning of old manholes and removal of old covers all as directed by Engr-in-charge.
M&L for TMT bars of dia 6 to 8 mm, cut to length, bent to shape, hooking incl cranking to shape, etc and binding with MS annealed wire not less than 0.9mm dia as in stirrups, binders and spacers.
Dismantling unframed timber work in fillets, rails, posts, rafters, purlins, etc under 40 sq.cm in section complete all as specified and directed.
Distmantling unframed timber scantlings 40 sq.cm and over in section in any position complete all as specified and directed.
JAY ANN CONSTRUCTION COMPANY
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .