REPAIRS/MAINT OF TECHNICAL AREA OF ARMY AVIATION UNITS UNDER GE MISSAMARI

Amount

Taking down Chowkhats or frames not exc. 1.5 sq. m each but with shutters (without taking off shutters from the frames)complete all as specified and as directed.

S&F powder coated Anodised aluminium frame for doors, windows, ventilators, partitions with one or more rebates (minimum thickness of powder coating 50 micron) including joining cleat for fixing etc. complete all as specified and directed Note:- Design/pattern, profile sizes and other dimensions shall be of standard sizes and as directed

S&F powder coated anodised aluminium doors shutters (aluminum section weighing 0.55 kg/m) including necessary joining cleats, glazing clips, (minimum thickness of powder coating 50 micron) rubber packing, anodised aluminium snap beading, screws, along with standard locking arrangements, handles, tower bolts etc as required. complete all as specified and directed Note:-(i) Labour charges for fixing of glass/wire guage/Particle board is inclusive in the unit rate quoted. Glass/Wire Guage/locks shall be measured and paid seperately at supply only rates (ii) Design/pattern, profile sizes and other dimensions shall be of standard sizes and as directed

Supply only 4mm thick plain sheet glass, ordinary quality fixed with Aluminum frame work exc 0.5 sqm in each pane complete all as specified and as directed.

Supply only 12mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed to Aluminum frame work complete all as specified and as directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, fixed in opening as specified in SSR Part I, Section 8 complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes far top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC “C” channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; Paneling of plain colour PVC sheets to be fitted in the MS frame welded / sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement as specified in SSR Part I, Section 8 complete all as specified and as directed.

S&F 250mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

S&F butt hinges 75mm size extruded aluminium alloy with galvanised MS hinge pin, anodized and fixed type C-21, complete all as specified and as directed

S&F 150 mm Extruded aluminium alloy handles, fabricated type, anodised, complete all as specified and directed.

S&F 150mm long aluminium anodized, barrel tower bolts of extruded section and fixed, complete all as specified.

S&F in repair, Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. complete all as specified and directed.

M & L Anodised aluminium snap grid frame work for false ceiling,Size of grid 605 x 605mm, (size of main runner 39x24.7x0.8mm, cross Tee 29x24.7mmx0.8mm, wall flange 22.2x22.2x0.65mm) hanging with 1.8mm dia GI wire suspenders from roof, ‘J’ hooks bolts and nuts etc, with and including 4mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to Aluminium framework with screws, including dismantling existing unserviceable ceiling complete all as specified and directed .

S&F Prepainted galvalume aluminium zink coating GI based corrugated/semi corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws, including dismantling of old unserviceable AC sheet of any description complete all as specified and as directed.

S&F Prepainted galvalume aluminium zink coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws including dismantling of old unserviceable AC sheet of any description complete all as specified and as directed

S&F Roof tubular steel trusses including distance pieces, cleats special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS-1161-1979 grade ST-2400, including necessary preparation of surfaces and applying one shop coat of red oxide, zinc chrome primer including dismantling of old mild steel work of any description complete all as specified and as directed.

S&F in repair, 110mm bore PVC (SWR) pipes, single socketed, in any length, with rubber rings, fixed to walls, complete all as specified and directed complete all as specified and as directed.

S&F in repair,110mm bore PVC (SWR) bends any radius complete all as specified and as directed.

S&F in repair, 75mm bore PVC (SWR) pipes, single socketed, in any length, with rubber rings, fixed to walls, complete all as specified and directed complete all as specified and as directed.

S&F in repair, 75mm bore PVC (SWR) bends any radius complete all as specified and as directed.

S&F 15mm bore GI pipe medium grade water tube with all fittings laid in floors, fixed to walls and ceilings including necessary taking up/down old unserviceable pipe complete all as specified and as directed.

S&F 20mm bore GI pipe medium grade water tube with all fittings laid in floors fixed to walls and ceilings including necessary taking up/down old unserviceable pipe complete all as specified and as directed.

S&F in repair, Aluminium (extruded section) body, Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

S&F in repair, 15mm bore chromimum plated, fancy type Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixedcomplete all as specified and as directed.

S&F in repair 15mm bore Bib taps, fancy type, chromimum plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

S&F in repair 15mm bore, fancy type, pillar taps, cast copper alloy with capston heads, chromium plated, fancy type, screwed down high pressure, with or without lettered hot or cold with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and as directed.

S&F in repair, health faucet with 15mm dia, 1 meter long easy flexible tube in chrome finish & wall hook all as specified and as directed

S&F in repair 10 ltrs capacity low level valve less PVC syphonic action type flushing cistern white with in let ball valve float and handle, PVC flush pipe, complete all as specified and as directed.

S&F in repair Vitreous China, pedestal pattern white (excluding fixing bolts, flushing cistern and flush pipe) including Plastic water closet seat cover, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed.

S&F in repair, vitreous China pedestal wash basin, white, flat back, size 550x400mm including brackets including cutting for and pinning in ends of brackets or erecting stand, with and including 32mm bore Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap , PVC solid 32mm bore waste pipe, 800mm long complete all as specified and as directed.

S&F PVC connection 15mm size with PTMT nuts, 450mm long complete all as specified and as directed.

S&F in repair Brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

S&F in repair, Towel ring Square with round flange complete all as specified and directed.

S&F in repair, corner glass shelf, with bracket chrome finish complete all as specified and directed.

S&F in repair, Toilet roll holder, chrome finish complete all as specified and directed.

S&F in repair 600x450mm bevelled edge mirror of selcted quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers all as specified complete all as specified and as directed

S&F in repair, 125mm Brass chromium plated shower rose with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and as directed.

M&L Glazed ceramic coloured tiles in vertical surfaces 450x 350x 7 mm thick set and jointed in neat cement slurry & pointed in white or colour cement to match including backing coat 10 mm thick in Cement Mortar 1:4, including dismantling wall tiling with cement mortar bedding and removing rubbish/debris off the premises complete all as specified and directed.

M&L Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured including 15 mm thick Screed bed or bedding layer of cement mortar 1:6, for laying floor finishes, including dismantling floor tiling with cement mortar bedding and removing rubbish/debris off the premises complete all as specified and directed.

M&L Virified Ceramic tiles dark shade, double charged 10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick Screed bed or bedding layer of cement mortar 1:6, for laying floor finishes,including dismantling floor tiling with cement mortar bedding and removing rubbish/debris off the premises complete all as specified and directed.

M&L 100mm thick cement concrete type B-2 (1:2:4) using 40 mm graded stone aggregate as Path/hardstanding finished even and fair, including demoliation of existing unserviceable concrete and removing debries off the site complete all as specified and directed.

M&L 75mm thick cement concrete (1:3:6) type C-2( using 40mm graded crushed stone aggregate) as in plinth protection laid in alternate bays (not exceeding 2 Sqm each) and finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight including demoliation of existing unserviceable plinth protection and removing debries off the site complete all as specified and directed.

M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour,design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc.,of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, including demoliation of existing unserviceable paver block complete all as specified and as directed.

S&F 500 Ltrs. Capacity rotational moulded polyethylene water storage tanks (cylinder vertical with class top) hoisted and fixed in position all as specified including 20mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 20 mm - 210 gms), including dismantling existing unserviceable tank complete in all as specified and as directed.

S&F 1000 Ltrs. Capacity rotational moulded polyethylene water storage tanks (cylinder vertical with class top) hoisted and fixed in position all as specified including 20mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 20 mm - 210 gms), including dismantling existing unserviceable tank complete in all as specified and as directed.

M&L for water proofing treatment to RCC roof slab, including parapet comprising with the following course of treatment/specification from bottom to top, including of old unserviceable roof treatmnt including PCC padding complete all as specified and directed:- (i) Cleaning of old concrete surfaces of roof, picking sweeping cleaning the surface to remove all loose dust and thoroughly washing down with clean water and dried complete and providing PCC 25mm thick average thickness Type B0 (using 20mm graded aggregate) as levelling course (ii) Rendering 10mm thick in CM (1:4) mixed with and including water proofing compound as per manufacture instruction on existing roof surface true to level after applying cement slurry @ 3Kg/Sqm over RCC slab when concrete is green (iii) Applying one coat of bituminous primer @ 0.40 Ltr/Sqm. (iv) Supply and laying 3mm thick APP based olymeric membrane of approved manufacturer with weight not less than 3.50 Kgs per Sqm, reinforced with non-woven polyester febric weight not less than 160gms per Sqm. Polymeric membrane shall be taken to a height of 30cm(minimum) and than inserted inside the groove of parapet wall and shall be finished by a membrane flashing. (v) One coat of Solar reflective bituminious Aluminium paint of approved brand to be provided over the APP membrane as per manufacturers instructions. Note : (a) Work shall be carried out through specialized applicator approvrd by GE. Contractor shall submit sufficent documents/Credentials in support of Applicator whom he wants the work excuted. (b) Laying APP based polymeric membrane shall be done torch on method as per manufactures instructions. (c) A minimum overlap of 100mm and 75mm should be made at the end and sides of the polymeric membrane respectively and sealed all overlaps and joints as per manufacturers instruction

M&L for brick work with sub-class 'B' bricks built in cement mortar 1:6 straight or curved on plan exceeding 6mtr mean radius including demolition of existing unserviceable brick work build in cement mortar including removing rubbish/debris off the premises complete all as specified and directed.

Taking down cement plaster on wall & ceiling of any description including racking out joints, hacking for key and scrubbing down with water etc complete all as specified and as directed.

M&L for Rendering 15 mm thick on other than fair faces of brick work or concrete surfaces in cement mortar 1:6 for finished even and fair complete all as specified and as directed.

M & L for preparation of new wall surface applying Two or more coats of 100% Premium acrylic exterior emulsion paint with silicone additives of required shade additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @2.20 litre/ 10 sqm over new surface over 1 mm thick wall care putty,complete all as specified and directed.

M & L for preparation of old wall surface applying one coats of 100% Premium acrylic exterior emulsion paint with silicone additives of required shade additives @ 1.43 litre/ 10 sqm complete all as specified and directed.

M&L for preparation of new plastered wall surface applying Two or more coats of Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour over a coat of chalk whiting complete, as per manufacturer's specification, complete all as specified and directed.

M&L for Complete removal of old finishes from surface of wall, preparation of old plastered wall surface applying Two coats of Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour, as per manufacturer's specification, complete all as specified and directed.

M&L for preparation of old plastered wall surface applying one coats of Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour, as per manufacturer's specification, complete all as specified and directed.

M&L for preparation of old plastered wall surface and Providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and as directed.

M&L for preparation of old wooden surfaces of any description, over 10cm in width or girth, not otherwise described, and applying one coats of synthetic enamel paint (1st quality) complete all as specified and directed.

M&L for preparing old steel surfaces of any description, not otherwise describe over 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified and as directed.

S&F nylon HDPE bird proofing net 2cm pitch complete all as directed. Note:- Rate quoted is deemed to be inclusive of necessary scaffolding and any other fitting and binding materials as required for fixing the net.

M&L racking out existing sealent from joints to a depth of 30mm, cleaning the grooves joints, edges up to depth of at least 15mm by scrapping/griding by mechanical means to expose the concrete surfaces complete all as directed. Note : Work shall be executed by authorised applicator of the manufacturer.

Supply and inserting 12 to 15mm thick compressed nylon expansion joint board in the groove, and inserting 12 to 15mm dia closed dia cell baker rod maintaining uniform depth and application by filling the joint with PU sealent complete all as directed. Note : Work shall be executed by authorised applicator of the manufacturer.

M&L for rendering 20mm thick with cement mortar 1:4 on fair faces of brick work in two layers (10mm and 10mm) sperately mixed with and including water proofing compund in top layer as per manufacturers instruction and finishing the surfaces even and fair complete all as specified and directed.

BEE KAAY TRADERS

M/S RANA ENGINEERING ENTERPRISE

M/S B.B. Singh Contractor

bkgeneralstores

United Traders

Shree Krishna Traders