Loading
Loading…
Loading…
Tender Value
₹11.1 L
EMD Value
₹1.1 L
Closing Date
10 Jul 2026, 12:00 pm
Similar tender results from the same govt authority in the past 3 years.
eo np dhanura
NPP dhanaura
moh gandhinagar ward no 10 me roopchand ke makan se soran singh ke makan tak amit ke makan se hardayal prem se ve dalchand ve ramkishor ke makan se raamkumar ke makan tak interloking sadak/nali nirman
2026_DOLBU_1161863_1
90/NPPD/E-Tander/2026-27
Open Tender
Civil Works
90 days
NPP Dhanaura
Please refer Tender documents.
3 documents required · 3 mandatory
₹1,314
EO DHANAURA
₹1.1 L
19 Jun 2026
19 Jun 2026
10 Jul 2026
19 Jun 2026
10 Jul 2026
19 Jun 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount | Item Code |
|---|---|---|---|---|---|---|
| 1CC Road | ||||||
| 1.01 | Dismentling of old I/L road including with 5km distance all comp. | - | Nos | - | - | BI01010001010000000000000515BI0100001113 |
| 1.02 | Construction of sub grade and earthern shoulders with approved material obtained from borrow pits with all lifts and leads transporting to sites, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 1000 m as per technical specification clause 303.1 MORD Specific - ations 800 & 1200 Sr.
No.3.14 | 1 | Nos | 1 | ₹1 | BI01010001010000000000000515BI0100001114 |
| 1.03 | Construction of granular sub-base by providing well graded material, spreading in uniform layers with
motorgrader/ tractormountedappropriateequipmentonpreparedsurface,mixingbymix inplace
method with rotavator at OMC, and compacting with smooth MORD Specifications 401 | 1 | Nos | 1 | ₹1 | BI01010001010000000000000515BI0100001115 |
| 1.04 | Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, a MORD Specific - ations 405.3 | 1 | Nos | - | - | BI01010001010000000000000515BI0100001116 |
| 1.05 | 600&Brick masonry work in cement mortar in foundation complete exccpting pointing and plastering 1200 as per drawing and technical specification clauses MORD Specific - ations 600 & 1200 Sr.
No.11.5 | - | Nos | 1 | - | BI01010001010000000000000515BI0100001117 |
| 2 | Plstering with cement mortar (1:4), 12 mm thick on brick work in substructure as per technical specification Clauses 613.4 and 1204 MORD Specific - ations 600 & 1200 Sr.
No.12.3 | 1 | Nos | - | - | BI01010001010000000000000515BI0100001118 |
| 3Construction of un-reinforced plain cement concrete pavement, 15 cm thickness as per design over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M 30 Grade coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side frame work (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including leveling the framework as per drawing), spreading the concrete with shovels, rakes compacted using needle, screed and plate vibrators and finished in continious operation including provision of contraction and expansion, construction joints by providing 12mm thick dura board at the specified spacing, applying debonding strips primer, sealant near approaches to bridge/culvert and construction joints admixtures as approved, curing of concrete slabs for 14-days and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 but including cost of polythene sheet. | ||||||
| 4RCC work with approved coarse sand and 2 cm guage approved stone grit in 1:1.5:3 in lintels of doors, windows and sunsheds excluding supply of reinforcement and its fixing and binding the same with 24B.W.G.G.I binding wire and including necessary centering and shuttering etc required for proper completion of work. in M-20 Grade MORD Specific - ations 800 & 1200 Sr. No.11.40 (iv) | ||||||
| 5 | Mild steel or TMT Bars(Fe-500D grade or higher) or HYSD Bars or iron in plain work such as reinforced concrete or reinforced brick work (when not included in an over all rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of all steel.MORD Specific - ations1000 Sr.
No.12.6 | 1 | Nos | - | - | BI01010001010000000000000515BI0100001121 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.73 MB
BOQ_2177936.xls
BOQ • 0.30 MB
Download all tender documents and submit your bid