Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
Refer Docs
Closing Date
2 Feb 2026, 11:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Single Packet
Normal Tender
No
Not Applicable
Total Value Wise
Lowest to Highest
CONSIGNEE
RDSO
90 days
Expenditure
General
82
3 conditions
/We engage to supply the Western Railway with the articles specified above upon the terms of the Indian Railway Standard Conditions of contract (latest revision) and upon the terms of t he R e v i s e d Special Conditions and instructions for the guidance of the contracts issued by the Western Railway S/137/F Revised May 2011 Amendment No. 10 of November 2017.
Procurement will be made from the sources approved by RDSO. Approval should shall be as on the date of tender opening and not thereafter, unless it is a case of removal/suspension/banning/downgraded. .
The Authorised dealer should submit valid TENDER SPECIFIC authorisation letter alongwith their offer failing which their offer will liable to be passed over.
30 conditions
MARKING : Manufacturer to mark his name and date of manufacture as per drawing, wherever indicted, or at a location where it may not get obliterated in service on the item being supplied by them against the purchase order. Supplies received without this are liable to be rejected by consignee.
MSE : a] Please indicate whether you are registered with any of the following Micro & Small Enterprises (MSE) agencies : District industries Centres, KVIC, KVIB, Coir Board, NSIC, Diretorate of Handicraft & Handloom or any other body specified by Ministry of MSME.[Name the agency clearly] b] If you are registered with any of the above mentioned agencies, lease indicate the terminal validity date of registration and also indicate whether the Enterprise is owned by SC/ST.
Risk purchase TIME LIMIT FOR MAKING RISK PURCHASE WILL BE 9 MONTHS INSTEAD OF 6 MONTHS.
Validity : Tenderers to quote minimum 90 days validity of offers.
LIQUIDATED DAMAGE (LD) ON DELAYED SUPPLY: Recovery of Liquidated Damage (LD) shall be levied @ 1/2% (half percent) of the price of the store per week or part of the week during which delivery is accepted and the upper limit for recovery of LD in supply contracts is 10%(ten percent) of the value of contract irrespective of delays, unless otherwise provided, specifically in the contract.
ADVANCE ACCEPTANCE/COUNTER OFFER AND DELIVERY PERIOD: The delivery period in Store Procurement cases shall be reckoned from the date of issue of Advance PO/Letter of Advance Acceptance/Letter of Acceptance.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
2 locations across Gujarat · 1,050 Numbers · 100 Set total
HEX SOCKET HEAD CAP SCREW
82256378A~WR
82256378A
Open - Indigenous
Goods
Gujarat
₹0
Exempted
2 Feb 2026
19 Jan 2026
8 items · 1,050 Numbers · 100 Set total
HEX SOCKET HD. SCREW WITH FLAT POINT M12X25-45H.MATERIAL & SPECIFICATION: IS:6094 (PART-1)-2006, PROPERTY CLASS-45H OF ISO 898, Pt-5, COATING AS PER MDTS-057. NOTE: ITEM SHALL BE PROCURED FROM RDSO APPROVED SOURCES OF AXLE END HIGH TENSILE CAP SCREWS TO BE USED IN EN D HOLES OF BG FREIGHT AXLES. [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SECTION ENNGINEER (C&W) PRATAPNAGAR, WR | Gujarat | 100.00 Numbers |
| Total | 100 Numbers | |
HEX SOCKET HEAD CAP SCREW M12X45mm HIGH TENSILE AS PER IS:2269-2006 WITH PROPE RTY CLASS-10.9 TO IS:1367 PART-3-2002, CE COATING AS PER MDTS-057. NOTE: ITEM SHALL BE PROCURE D FROM RDSO APPROVED SOURCES OF AXLE END HIGH TENSILE CAP SCREWS TO BE USED IN END HOLES OF BG FREIGHT AXLES. [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SECTION ENNGINEER (C&W) PRATAPNAGAR, WR | Gujarat | 250.00 Numbers |
| Total | 250 Numbers | |
HEX SOCKET HEAD CAP SCREW M20X55 HIGH TENSILE AS PER IS:2269-2006 WITH PROPERTY CLASS-10.9 TO IS:1367 PART-3-2002, CE COATING AS PER MDTS-057. NOTE: ITEM SHALL BE PROCURED FR OM RDSO APPROVED SOURCES OF AXLE END HIGH TENSILE CAP SCREWS TO BE USED IN END HOLES OF B G FREIGHT AXLES. [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SECTION ENNGINEER (C&W) PRATAPNAGAR, WR | Gujarat | 100.00 Numbers |
| Total | 100 Numbers | |
HEX. SOCKET COUNTER SUNK HD SCREW M8X70 CONFORMING TO IS 6761: 1994, 12.9, MDT S-057. NOTE: ITEM SHALL BE PROCURED FROM RDSO APPROVED SOURCES OF AXLE END HIGH TENSILE CA P SCREWS TO BE USED IN END HOLES OF BG FREIGHT AXLES. [ Warranty Period: 30 Months after the dat e of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SECTION ENNGINEER (C&W) PRATAPNAGAR, WR | Gujarat | 100.00 Numbers |
| Total | 100 Numbers | |
HEX HEAD PLUG SCREW M22X1.5 as per Drg.No. DIN910, ST, PROPERTY CLASS 10.9 AS PER I S:1367(PART-3)-2002, A3C. NOTE: ITEM SHALL BE PROCURED FROM RDSO APPROVED SOURCES OF AXLE E ND HIGH TENSILE CAP SCREWS TO BE USED IN END HOLES OF BG FREIGHT AXLES. [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SECTION ENNGINEER (C&W) PRATAPNAGAR, WR | Gujarat | 100.00 Numbers |
| Total | 100 Numbers | |
HEX SOCKET HEAD CAP SCREW M8X25 HIGH TENSILE AS PER IS:2269-2006 WITH PROPERTY CLASS-10.9 TO IS:1367 PART-3-2002, CE COATING AS PER MDTS-057. NOTE: ITEM SHALL BE PROCURED FR OM RDSO APPROVED SOURCES OF AXLE END HIGH TENSILE CAP SCREWS TO BE USED IN END HOLES OF B G FREIGHT AXLES. [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SECTION ENNGINEER (C&W) PRATAPNAGAR, WR | Gujarat | 200.00 Numbers |
| Total | 200 Numbers | |
HEX SOCKET HEAD CAP SCREW M 12X60 HIGH TENSILE AS PER IS:2269-2006 WITH PROPERT Y CLASS-10.9 TO IS:1367 PART-3-2002, CE COATING AS PER MDTS-057. NOTE: ITEM SHALL BE PROCURED F ROM RDSO APPROVED SOURCES OF AXLE END HIGH TENSILE CAP SCREWS TO BE USED IN END HOLES OF BG FREIGHT AXLES. [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SECTION ENNGINEER (C&W) PRATAPNAGAR, WR | Gujarat | 200.00 Numbers |
| Total | 200 Numbers | |
SET OF HEX HEAD PLUG SCREWS. ONE SET CONSISTING OF (I) HEX HEAD PLUG SCREW M10X 1 AS PER DIN-910, ST, PROPERTY CLASS 10.9 AS PER IS:1367(PART-3)-2002, A3C QTY- 01 (II) HEX HEAD PL UG SCREW M27X2 AS PER DIN910, ST, PROPERTY CLASS 10.9 AS PER IS:1367(PART-3)-2002, A3C QTY- 01. NOTE: ITEM SHALL BE PROCURED FROM RDSO APPROVED SOURCES OF AXLE END HIGH TENSILE CAP SCRE WS TO BE USED IN END HOLES OF BG FREIGHT AXLES. [ Warranty Period: 30 Months after the date of del ivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SECTION ENNGINEER (C&W) PRATAPNAGAR, WR | Gujarat | 100.00 Set |
| Total | 100 Set | |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
StandardlistRDSO.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .