REPAIR AND MAINT OF INTERNAL ELECTRIFICATION SUB MAIN WIRING DBs REPLACEMENT OF OLD US LIGHT FITTING FIXTURE AND CONNECTED WORKS IN MANEKSHAH AND THIMYYA BN TAB BLDG AREA AT IMA DEHRADUN

Amount

Taking down carefully existing aluminum/copper surface/concealed point wiring (light, fan, socket or power point) complete of any description including fitting such as switches, ceiling roses, regulators, sockets, wooden boards, laminated sheets from sunken boxes, boards, holders and making good the disturbed surfaces in cement mortar 1:3 of walls, floors, ceiling etc including distempering to match with existing surfaces complete all as specified and directed.

Material and labour for point wiring with PVC insulated and unsheathed electric cable 1100 volts grade single core FRLSH having multi stranded copper conductor of 1.5 sq mm nominal cross sectional area drawn in and including concealed non metallic rigid PVC conduit not less than 20 mm dia with all fitting and fixing accessories and 1.5 sq mm PVC insulated unsheathed multistranded copper conductor cable as continuous earth conductor, connected to earth dolly by providing suitable lugs with & including pressed steel sunken terminal boxes 1.6 mm thick, 60 mm deep of required size factory made for mounting switch, regulators etc with and including 3 mm thick plastic hylam laminated sheet cover (white) ISI marked, fixed with brass screws and cup washers duly painted with two coats of anti corrosive paint/black bituminous paint outside and two coats of aluminium paint inside for mounting switches, sockets etc complete for the following. :- Make of wire: Finolex, Plaza, Havells, Polycab, Gloster, Grandlay. Make of conduit: Finolex, Ess Ess Kay, ICL,AKG Note: (i) The quoted rates shall be deemed to be inclusive for cutting chasing in wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the existing surface. The portion of point wiring at ceiling shall be in surface conduit of suitable size fixed on ceiling surface with using PVC rawl plugs. (ii) Point wiring & earth wire shall be connected to each & every sunken box. (iii) All screws, fasteners, bolts, nuts & washer shall be cadmium plated & the cost of which is deemed to be included in the quoted unit rates.

One light point controlled by one, one way 6 Amp switch

One fan/exhaust fan point controlled by one, one way 6 Amp switch

One 5 pin 5/6 Amps socket outlet point on the same board .

One 5 pin 5/6 Amps socket outlet point on independent board.

One bell point controlled by one, one way 6 Amp button switch.

Description all as per item No 2 here in before but point wiring with 2.5 Sqmm multistrand copper conductor cable for one six pin socket outlet 15 Amps controlled by one switch on independent board and 2.5 sq mm PVC insulated multistranded copper conductor cable as continous earth wire.

Material and labour for point wiring with PVC insulated and unsheathed electric cable 1100 volts grade single core FRLSH having multi stranded copper conductor of 1.5 Sqmm nominal cross sectional area drawn in and including PVC casing & caping/conduit on surface of wall/ceiling/floor with all fitting and fixing accessories and 1.5 sq mm PVC insulated unsheathed multistranded copper conductor cable as continuous earth conductor, connected to earth dolly by providing suitable lugs with & including pressed steel sunken terminal boxes 1.6 mm thick, 60 mm deep of required size factory made for mounting switch, regulators etc with and including 3 mm thick plastic hylam laminated sheet cover (white) ISI marked, fixed with brass screws and cup washers duly painted with two coats of anti corrosive paint/black bituminous paint outside and two coats of aluminium paint inside for mounting switches, sockets etc complete for the following. Make of wire: Finolex, Plaza, Havells, Polycab, Gloster,, Grandlay. Make of casing caping: Finolex, Jindal, Modi, Asian,AKG Note: (i) The quoted rates shall be deemed to be inclusive for fixing the casings to surface with using PVC rawl plugs etc. (ii) Point wiring and Earth wire shall be connected to each & every sunken box. (iii) All screws, fasteners, bolts, nuts & washer shall be cadmium plated & the cost of which is deemed to be included in the quoted unit rates.

One light point controlled by one, one way 6 Amp switch

One fan/exhaust fan point controlled by one, one way 6 Amp switch

One 5 pin 5/6 Amps socket outlet point on the same board

One 5 pin 5/6 Amps socket outlet point on independent board

One bell point controlled by one, one way 6 Amp button switch.

Description all as per item No 4 here in before but point wiring with 2.5 Sqmm multistrand copper conductor cable for one six pin socket outlet 15 Amps controlled by one switch on independent board and 2.5 sq mm PVC insulated multi strand copper conductor cable as continous earth wire.

Material and labour for point wiring with PVC insulated and unsheathed electric cable 1100 volts grade single core FRLSH having multi stranded copper conductor of 1.5 Sqmm nominal cross sectional area drawn in existing conduit either concealed or over the surface of wall / ceiling/ floor with all fitting and fixing accessories and 1.5 Sq mm PVC insulated unsheathed multistranded copper conductor cable as continuous earth conductor, connected to earth dolly by providing suitable lugs with & including pressed steel sunken terminal boxes 1.6 mm thick, 60 mm deep of required size factory made for mounting switch, regulators etc with and including 3 mm thick plastic hylam laminated sheet cover (white) ISI marked, fixed with brass screws and cup washers duly painted with two coats of anti corrosive paint/black bituminous paint outside and two coats of aluminium paint inside for mounting switches, sockets etc complete for the following. Make of wire: Finolex, Plaza, Havells, Polycab, Gloster, Grandlay. Make of casing caping: Finolex, Jindal, Modi, AKG Note: (i) The quoted rates shall be deemed to be inclusive for making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the existing surface. (ii) Point wiring & earth wire shall be connected to each & every sunken box. (iii) All screws, fasteners, bolts, nuts & washer shall be cadmium plated & the cost of which is deemed to be included in the quoted unit rates.

One light point controlled by one, one way 6 Amp switch

One fan/exhaust fan point controlled by one, one way 6 Amp switch

One 5 pin 5/6 Amps socket outlet point on the same board with

One 5 pin 5/6 Amps socket outlet point on independent board

One bell point controlled by one, one way 6 Amp switch.

Description all as per item No 6 here in before but point wiring with 2.5 Sq mm multistrand copper conductor cable for one six pin socket outlet 15 Amps controlled by one switch on independent board and 2.5 sq mm PVC insulated multi strand copper conductor cable as continous earth wire.

S & F switch piano, flush type, single pole one way, 5/6 Amp complete all as directed. Make: Anchor, Legrand, Havells

S & F switch piano, flush type, single pole one way, 15/16 Amp complete all as directed. Make: Anchor, Legrand, Havells

S & F socket outlet, multipurpose, 2 in 1 5 pin, 5 Amp complete all as directed. Make: Anchor, Legrand, Havells

S & F socket outlet, multipurpose, 2 in 1 5 pin, 15 Amp complete all as directed. Make: Anchor, Legrand, Havells

S & F for Electronic step type fan regulator 100 watt 230 volts AC 50 Hz complete all as directed. Make: Anchor, Bajaj, Crompton, Havells

S & F Bell AC 230 volts single pole complete all as directed. Make: Anchor, Legrand, Havells

S & F Bell push flush type, 5 Amps complete all as directed. Make: Anchor, Legrand, Havells

Material and labour for modular point wiring with PVC insulated and unsheathed electric cable 1100 volts grade single core FRLSH having multi stranded copper conductor of 1.5 Sq mm nominal cross sectional area drawn in and including existing concealed conduit with all fitting and fixing accessories and 1.5 sq mm PVC insulated unsheathed multistranded copper conductor cable as continuous earth conductor, connected to earth dolly by providing suitable lugs with & including inner and outer frame plate matching with surrounding with modular sunken steel boxes zinc oxide plated of suitable size for mounting modular switches, sockets ,regulator etc complete for the following: Make of wire: Finolex, Plaza, Havells,Grandlay Polycab, Make of conduit: Finolex, Ess Ess Kay, AKG,Modi Note: (i) The quoted rates shall be deemed to be inclusive for making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the existing surface. (ii) Point wiring & earth wire shall be connected to each & every sunken box. (iii) All screws, fasteners, bolts, nuts & washer shall be cadmium plated & the cost of which is deemed to be included in the quoted unit rates.

One light point controlled by one, one way 6 Amp modular switch.

One fan/exhaust fan point controlled by one, one way 6 Amp modular switch.

One 5 pin 5/6 Amps socket outlet point on the same board

One 5 pin 5/6 Amps socket outlet point on independent

One bell point controlled by one, one way 6 Amp modular switch.

Description all as per item No 15 here in before but point wiring with 2.5 Sq mm multistrand copper conductor cable for one six pin socket outlet 15 Amps controlled by one switch on independent board and 1.5 sq mm PVC insulated multistranded copper conductor cable as continous earth wire.

Material and labour for modular point wiring with PVC insulated and unsheathed electric cable 1100 volts grade single core FRLSH having multi stranded copper conductor of 1.5 Sqmm nominal cross sectional area drawn in and including concealed non metallic rigid PVC conduit not less than 20 mm dia with all fitting and fixing accessories and 1.5 sq mm PVC insulated unsheathed multistranded copper conductor cable as continuous earth conductor, connected to earth dolly by providing suitable lugs with & including inner and outer frame plate matching with surrounding with modular sunken steel boxes zinc oxide plated of suitable size for mounting modular switches, sockets,regulator etc complete for the following: Make of wire: Finolex, Plaza, Polycab,Make of conduit: Finolex, Ess Ess Kay, ICL,AKG. Note: (i) The quoted rates shall be deemed to be inclusive for cutting chases in wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the existing surface. The portion of point wiring at ceiling shall be in surface conduit of suitable size fixed on ceiling surface with using PVC rawl plugs. (ii) Point wiring & earth wire shall be connected to each & every sunken box. (iii) All screws, fasteners, bolts, nuts & washer shall be cadmium plated & the cost of which is deemed to be included in the quoted unit rates.

One light point controlled by one, one way 6 Amp modular switch.

One fan/exhaust fan point controlled by one, one way 6 Amp modular switch.

One 5 pin 5/6 Amps socket outlet point on the same board

One 5 pin 5/6 Amps socket outlet point on independent board

One bell point controlled by one, one way 6 Amp modular switch.

Description all as per item No 17 here in before but point wiring with 2.5 Sqmm multistrand copper conductor cable for one six pin socket outlet 15 Amps controlled by one switch on independent board and 2.5 sq mm PVC insulated multistranded copper conductor cable as continous earth wire.

Material and labour for modular point wiring with PVC insulated and unsheathed electric cable 1100 volts grade single core FRLSH having multi stranded copper conductor of 1.5 Sqmm nominal cross sectional area drawn in and including PVC CASING AND CAPING with all fitting and fixing accessories and 1.5 sq mm PVC insulated unsheathed multistranded copper conductor cable as continuous earth conductor, connected to earth dolly by providing suitable lugs with & including inner and outer frame plate matching with surrounding with modular sunken steel boxes zinc oxide plated of suitable size for mounting modular switches, sockets ,regulators etc complete for the following: Make of wire: Finolex, Plaza, Polycab, GEMSCAB Make of conduit: Finolex, Ess Ess Kay, ICL,AKG. Note: (i) The quoted rates shall be deemed to be inclusive for making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the existing surface. (ii) Point wiring & earth wire shall be connected to each & every sunken box. (iii) All screws, fasteners, bolts, nuts & washer shall be cadmium plated & the cost of which is deemed to be included in the quoted unit rates.

One light point controlled by one, one way 6 Amp modular switch.

One fan/exhaust fan point controlled by one, one way 6 Amp modular switch.

One 5 pin 5/6 Amps socket outlet point on the same board

One 5 pin 5/6 Amps socket outlet point on independent board .

One bell point controlled by one, one way 6 Amp modular switch.

Description all as per item No 19 here in before but point wiring with 2.5 Sqmm multistrand copper conductor cable for one six pin socket outlet 15 Amps controlled by one switch on independent board and 2.5 sq mm PVC insulated multistranded copper conductor cable as continous earth wire.

S & F Modular switch single pole one way 6 Amp fixed complete all as directed. Make: Anchor, Legrand, Crabtree (Havells)

S & F for Modular switch single pole one way 16 Amp complete all as directed. Make: Anchor, Legrand, Crabtree (Havells)

S & F Modular socket outlet 2/3 pin combined 6 Amp 240 volts fixed complete all as directed. Make: Anchor, Legrand, Crabtree (Havells)

S & F Modular socket outlet 2/3 pin combined 16 Amp 240 volts complete all as directed. Make: Anchor, Legrand, Crabtree (Havells)

S & F Modular bell push flush type, 5 Amps complete all as directed. Make: Anchor, Legrand, Crabtree (Havells)

S & F fan regulator modular step type 120W 240 volts 2 module type complete all as directed. Make: Anchor, Bajaj, Crompton, Havells

S&F ceiling rose, 63.5 mm dia, ISI marked, three terminal of polycarbonate/isolated body complete all as directed. Make: Anchor, Crab tree, Ess Ess Kay

S&F Batten holder, PVC/polycarbonate type with back plate suitable for batten fittings complete all as directed. Make: Anchor, Crab tree, Ess Ess Kay

S & F sub main wiring with PVC insulated unsheathed FRLSH cable 1100 Volt grade, with multi stranded copper conductor drawing in and including rigid PVC conduit in concealed as required at site including one run PVC insulated unsheathed cable with multi stranded copper conductor colour code as a earth continuity and connected upto DB including taking Down old unsv submain wiring of following sizes complete all as specified and directed. Make: Finolex, Plaza, Polycab, GEMSCAB Note:Two/Four run of single core PVC cable with one run of earth conductor & conduit shall be measured as one unit. (ii) The quoted rates shall be deemed to be inclusive for fixing the conduits to surface with using PVC rawl plugs etc. (iii) Phase sequence colour code must follow i.e Phase( Red) and Neutral ( Black) In colour and for three Phase RYB For phase and black for neutral.

2 x 10 Sqmm + 1 x 10 sqmm

2 x 6 Sqmm + 1 x 6 sqmm

2 x 4Sqmm + 1 x 4 sqmm

2 x 2.5Sqmm + 1 x 2.5 sqmm

4 x 6Sqmm + 1 x 6 sqmm

4 x 10 Sqmm+ 1 x 10 sqmm

S & F in repair Distribution boards epoxy powder coated TP & N (VTPN MCCB DB) fabricated from minimum 1.6 mm thick CRCA sheet and fixed/ flush to wall and suitable for universal mounting with 250 Amps fully insulated copper Bus Bar for each phase and 02 neutral shrouded bar ,2 earth bar and cable tie for cable management with reversible door for IP-43 DB,S protection,415 volt flush to wall and suitable for fixing FP MCCB 100/125 Amps as incomer and 24 SP MCBs or 4/8/ 12 TP MCBs (or any combination of SP/TP MCBs) outgoings of following capacity including taking down old unsv MCCB DB,s complete all as directed. Note: Suitable MCCB and outgoing MCBs will be measured and paid separately under relavant items of this schedule):-

4 Way VTPN DB (FP MCCB +12 MCB,C). Make :legrand L&T, ABB, Schneider

8 WAY VTPN DB TP&N DB(FP MCCB +24 MCB,s) Make :legrand, L&T, ABB, Schneider

S & F in repairs MCCB ,4 pole ICS=100% ICU at 415 volts with rupturing capacity 18 KA with thermal-magnetic release and adjustable overload setting . The MCCB shall have a Mechanical life = 40000 operations & Electrical life = 8000 operations of following capacity complete all as directed. Make: Legrand, L&T, ABB, Schneider:-

S & F in repairs MCB SP complying to IS/IEC 60898, 240 volts 'B' Curve 10 KA with energy limiting class 3. The MCB shall have 50% lower watt loss as required by IS/IEC 60898 from 6A to 63A . The mcb shall have the unique property of di-electric strength, arc resistance, insulation, flame retardancy and temperature resistance, including connection with suitable size copper lugs, The MCB shall give visible flag indication when MCB trips on Short Circuit Fault. The MCB shall have safety shutter to avoid any wrong insertion of cable. The MCB shall have the termination capacity of 35 Sq mm. The MCB shall have electrical life 20,000 operations up to 32A and 12,000 operation up to 63A including connection with suitable size copper lugs complete all as directed. All the above-mentioned specs technical documents from OEM shall be provided by the contractor of following capaity:- Make: Legrand, L&T, ABB, Schneider

MCB SP6 to 32 Amps, 240 volts

MCB SP 40 to 63 Amps, 240 volts

MCB SPN 6 to 32 Amps 240 volts

MCB SPN 40 to 63 Amps 240 volts

S & F in repairs sheet metal enclosure, single pole and neutral with two pin and earth plug and socket with and including one single pole MCB 20 Amps, , complying to IS/IEC 60898, 240 volts 'C' Curve 10 KA with energy limiting class 3. The MCB shall have 50% lower watt loss as required by IS/IEC 60898 from 6A to 63A . The mcb shall have the unique property of di-electric strength, arc resistance, insulation, flame retardancy and temperature resistance, including connection with suitable size copper lugs, The MCB shall give visible flag indication when MCB trips on Short Circuit Fault. The MCB shall have safety shutter to avoid any wrong insertion of cable. The MCB shall have the termination capacity of 35 Sq mm. The MCB shall have electrical life 20,000 operations up to 32A and 12,000 operation up to 63A including connection with suitable size copper lugs complete all as directed. All the above-mentioned specs technical documents from OEM shall be provided by the contractor. Make: Legrand, L&T, ABB, Schneider

S & F in repair MCB DB complying with IEC 61439 -1 & 3., sheet metal enclosures double door .The DBs should be supplied with tin platted insulated copper bus bar rated for 100A. 240 volts 2 in 1 shutter (Metal Door) with IK09 type with blanking plates where required and IP 43 degree protection, the DB door should be hinged type and possible to reversible at site.The DB door shall have overhang, to gel with wall properly.The DB shall be supplied with all insulated N. Bar riveted on Din channel frame and should not restrict cable entry from top or bottom.The DB shall have plastic knobs on shield to hold complete all as directed. All the above mentioned specs the technical documents from OEM shall be provided by the contractor of following capaity :- Make: Legrand, L&T, ABB, Schneider

4 way SPN DB

8 way SPN DB.

12way SPN DB

16 way SPN DB

Supply and fix in repairs Exhaust fan 300 mm sweep, 1200 RPM, ,made up of Sturdy Engineering Plastic complete ,voltage 230 Volts ,50 Hz, energy saving model single phase copper wound motor, white in colour complete with blade, box type louvers etc including taking down old unsv exhaust fan complete all as specified and directed. Make : Havells /Crompton /Bajaj

Material and labour for Earthing complete with galvanized iron earth plate electrode 600 mm x 600 mm x 6 mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) vertically, with top edge of plate not less than 1.5 metre below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 of MES Schedule 2009(Part-I) connecting to earthing test point & to main switch board and testing on completion with and including necessary excavation and earth work in any type soil, earth lead connected to earth test point & to main switch board etc with & including adequate quantity of charcoal dust and common salt, test point, PCC (1:3:6) type C-1 (using 20mm graded BT stone aggregate) for earth pit with 40 x 40 x 6mm mild steel angle iron frame for cover, internal surface of concrete shall be given 10mm thick plaster in cement mortar 1:4, pre cast RCC (1:2:4) type B-1 (using 20mm graded BT stone aggregate) 40mm thick cover, reinforced with 8mm dia deformed or TMT bars 3 Nos both way with 12mm dia round bar handle, GI medium grade watering pipe 20 mm dia with funnel and wire mesh and 15mm dia GI light grade earth lead protection pipe etc complete all as specified and directed. Note: (i) Earth lead wire and its protection pipe upto and including 7.5 mtr only from the top of earth electrode are included under this item. (ii) Any joints in earth lead from earth electrode to test point shall not be allowed/permitted.

S & F in repairs Bulb LED 9 W, E-27 base,220v- 240v ,50 HZ,including taking down old unsv led bulb all as specified and directed.

S & F in repairs energy saving LED Bulb 14 W, E-27 base,220v- 240v ,50 HZ,including taking down old unsv led bulb all as specified and directed.

S & F in repairs Bulb LED 5 W,MR-16,GU5.3 base,220v- 240v ,50 HZ including taking down old unsv led bulb all as specified and directed.

S & F in repairs sheet metal enclosure, Triple pole and neutral with three pin and earth plug and socket with and including one triple pole MCB 32 Amps, 240 volts,10 KA , including taking down old unsv sheet metal enclosure complete all as directed. Make: Legrand, L&T, ABB, Schneider, C&S

S & F in repairs wall mounted Fan 400mm sweep ,2100 RPM high speed and 105CMM Air Delivery,strudy base and thermal overload protection ,voltage 230 Volts ,50 Hz, energy saving model single phase copper wound motor, white in colour complete with blade, etc including taking down old unsv wall mounted fan complete all as specified and directed. Make : Bajaj/Havlls/Crompton

S &F in repairs brass board screw including washer of following size all as directed :-

1 " (Pack of 100screw )

1 1/2 "( Pack of 50 piece )

S & F in repairs for PVC gitti of following size all as directed

35 x 8mm ( Pack of 100 piece )

50 x 8 mm ( Pack of 50 piece )

Supply and Fixing in repairs LED Batten light fittings on walls including brackets all as conforming to the following parameters including taking down old unsv Light fitting: - (i) Syatem watt/Lumens: - Max-22 watts/total system lumen not less than 2200 lm (ii) Housing: - High pressure die cast aluminium. (iii) IP Rating: - IP 20 (v) Mounting: - Wall Mounted (vi) Finish: - Polycarbonated diffuser (vii) Lamp: - High bright LED (viii) System Efficacy (lm/W) of the luminaries: - Not less than 100 lm/watt. (ix) Colour temperature (K): - Not less than 5700( COOL DAY LIGHT) (x) Color Rendering Index (CRI): - Not less than 80 (xi) Life: - Not less than 20000 Hrs of operation (xii) Optics: - Fully Diffused (xiii) Control gear: - inbuilt electronic driver, PF not less than 0.90 and THD less than 20 % with operating voltage 140-270V AC, 50 Hz (xiv) Surge protection: - inbuilt surge protection minimum 2.5KV (xv) Heat Shink: - As per OEM's design (xvi) Bidder has to compulsorily submit the data sheets conforming of technical spscifications. Make: - PHILIPS / HAVELLS / WIPRO/CROMPTON NOTE : (i) The Contractor has to make good of surface / ceiling damaged during fixing of the lights/fittngs as per existing surface/ceiling whatever it may be hence it is advised to visit the site before quoting rate. (ii) The contractor has to provide related T&P items required at site.

Supply and Fixing LED Batten light fittings 2 Feet on walls including acessories all as conforming to the following parameters including taking down old unsv Light fitting: - (i) System watt/Lumens: - Max-12 watts/total system lumen not less than 1200 lm (ii) Housing: - High pressure die cast aluminium. (iii) IP Rating: - IP 20 (v) Mounting: - Wall Mounted (vi) Finish: - Polycarbonated diffuser (vii) Lamp: - High bright LED (viii) System Efficacy (lm/W) of the luminaries: - Not less than 100 lm/watt. (ix) Colour temperature (K): - Not less than 5700(COOL DAY LIGHT) (x) Color Rendering Index (CRI): - Not less than 80 (xi) Life: - Not less than 20000 Hrs of operation (xii) Optics: - Fully Diffused (xiii) Control gear: - inbuilt electronic driver, PF not less than 0.90 and THD less than 20 % with operating voltage 140-270V AC, 50 Hz (xiv) Surge protection: - inbuilt surge protection minimum 2KV (xv) Heat Shink: - As per OEM's design (xvi) Bidder has to compulsorily submit the data sheets report conforming of technical spscifications . Make: - PHILIPS /HAVELLS//WIPRO/CROMPTON NOTE : (i) The Contractor has to make good of surface / ceiling damaged during fixing of the lights/fittngs as per existing surface/ceiling whatever it may be hence it is advised to visit the site before quoting rate. (ii) The contractor has to provide related T&P items required at site.

Supply and Fixing LED Suspended Batten light fittings on walls including hanging brackets ,all as conforming to the following parameters including taking down old unsv Light fitting: - (i) Syatem watt/Lumens: - Max-34 watts/total system lumen not less than 4000 lm (ii) Housing: - High pressure die cast aluminium. (iii) IP Rating: - IP 20 (v) Mounting: - Wall Mounted (vi) Finish: - Polycarbonated diffuser (vii) Lamp: - High bright LED (viii) System Efficacy (lm/W) of the luminaries: - Not less than 115lm/watt. (ix) Colour temperature (K): - Not less than 6500 (x) Color Rendering Index (CRI): - Not less than 80 (xi) Life: - Not less than 35000 Hrs of operation (xii) Optics: - Fully Diffused (xiii) Control gear: - inbuilt electronic driver, PF not less than 0.90 and THD less than 10 % with operating voltage 140-270V AC, 50 Hz (xiv) Surge protection: - inbuilt surge protection minimum 2.5KV (xv) Heat Shink: - As per OEM's design (xvi) Feature: ( COOL DAY LIGHT) /WARM WHITE LIGHT as per requirement Make: - PHILIPS /HAVELLS/WIPRO/CROMPTON NOTE : (i) The Contractor has to make good of surface / ceiling damaged during fixing of the lights/fittngs as per existing surface/ceiling whatever it may be hence it is advised to visit the site before quoting rate. (ii) The contractor has to provide related T&P items required at site.

Supply and Fixing LED Up Down twin glow 20W + 20W Batten light fittings on walls including brackets , all as conforming to the following parameters including taking down old unsv Light fitting: - (i) Syatem watt/Lumens: - Max-20 watts/total system lumen not less than 2000 lm on each side (ii) Housing: - High pressure die cast aluminium. (iii) IP Rating: - IP 20 (v) Mounting: - Wall Mounted (vi) Finish: - Polycarbonated diffuser (vii) Lamp: - High bright LED (viii) System Efficacy (lm/W) of the luminaries: - Not less than 100 lm/watt. (ix) Colour temperature (K): - Not less than 6500 on Down Side & 3000K on Up Side( COOL DAY AND WARM WHITE LIGHT) (x) Color Rendering Index (CRI): - Not less than 80 (xi) Life: - Not less than 35000 Hrs of operation (xii) Optics: - Fully Diffused (xiii) Control gear: - inbuilt electronic driver, PF not less than 0.90 and THD less than 20 % with operating voltage 160-360V AC, 50 Hz (xiv) Surge protection: - inbuilt surge protection minimum 2.5 KV (xv) Heat Shink: - As per OEM's design (xvi) (a). Bidder has to compulsorily submit the data sheet report conforming of technical spscifications and consolidated lab report for the offered LED has to be stractured in the same sequence. Make: - Philips/Havells/ Wipro /Crompton (i) The Contractor has to make good of surface / ceiling damaged during fixing of the lights/fittngs as per existing surface/ceiling whatever it may be hence it is advised to visit the site before quoting rate. (ii) The contractor has to provide related T&P items required at site.

Supply and Fixing LED 1 x 1 feet Surface Mounted light fittings on Ceiling including all accessories as conforming to the following parameters including taking down old unsv Light fitting: - (i) Syatem watt/Lumens: - Max-24 watts/total system lumen not less than 1600 lm on each side (ii) Housing: - CRCA (iii) IP Rating: - IP 20 (v) Mounting: - Ceiling Mounted (vi) Finish: - Opal PMMA Diffuser (vii) Lamp: - High bright LED (viii) System Efficacy (lm/W) of the luminaries: - Not less than 80 lm/watt. (ix) Colour temperature (K): - Not less than 6500 (x) Color Rendering Index (CRI): - Not less than 80 (xi) Life: - Not less than 35000 Hrs of operation (xii) Optics: - Fully Diffused (xiii) Control gear: - inbuilt electronic driver, PF not less than 0.90 and THD less than 10 % with operating voltage 140-27V AC, 50 Hz (xiv) Surge protection: - inbuilt surge protection minimum 2KV (xv) Heat Shink: - As per OEM's design (xvi) Feature: ( COOL DAY LIGHT) /WARM WHITE LIGHT as per requirement Make: - PHILIPS / HAVELLS / WIPRO/CROMPTON (i) The Contractor has to make good of surface / ceiling damaged during fixing of the lights/fittngs as per existing surface/ceiling whatever it may be hence it is advised to visit the site before quoting rate. (ii) The contractor has to provide related T&P items required at site.

Supply and Fixing Building security light fittings on poles/Wall including mounting brackets (32 mm MS pipe bend at 120 degree angle and 1.2 m long along with MS clamps to be fixed on wall all as conforming to the following parameters including taking down old unsv Light fitting : - (i) Syatem watt/Lumens: - Max-25 watts/total system lumen not less than 3000 lm (ii) Housing: - Single Piece High pressure die cast aluminium. (iii) IP Rating & IK Rating: - IP 66 & IK07 (iv) Front cover: - Polycarbonated Cover for More protection (v) Mounting: - Suitable for pole mounting with bracket arm 40-50mm dia, Mounting height- 5.50m to 6.50 m from GL. (vi) Finish: - Epoxy powder coated with any additional treatment for smooth and anti corrosive finish. (vii) Lamp: - High bright LED with Lens (viii) System Efficacy (lm/W) of the luminaries: - Not less than 120 lm/watt. (ix) Colour temperature (K): - Not less than 5700 (x) Color Rendering Index (CRI): - Not less than 70 (xi) Life: - Not less than 50000 Hrs of operation @ Ta 35*C (xii) Optics: - Spread (Beam angle along the driveway) - 120°, Through (Beam angle across the driveway)- 60°, Beam pattarn- Asymmetrical driveway. (xiii) Control gear: - inbuilt electronic driver with 325V Auto Cut off Restart feature & 440V Phase to Phase protection till 8 hour, PF not less than 0.95 and THD less than 10% at full load with operating voltage 140-270V AC, 50 Hz. (xiv) Surge protection: - inbuilt surge protection minimum 4KV. (xv) Heat Shink: - As per OEM's design Make: - PHILIPS /HAVELLS/WIPRO/CROMPTON NOTE : (i) The Contractor has to make good of surface / ceiling damaged during fixing of the lights/fittngs as per existing surface/ceiling whatever it may be hence it is advised to visit the site before quoting rate. (ii) The contractor has to provide related T&P items required at site.

Supply and Fixing LED 2x2 Recessed Mounted fittings on armstrong/Gypsum/POP Ceiling including all accessories and frame required for fixing the fitting including taking down old unsv recess mounted fitting all as conforming to the following parameters: - (i) Syatem watt/Lumens: - Max 30 watts/total system lumen not less than 3600lm (ii) Housing: - Single Piece CRCA body (iii) IP Rating & IK Rating: - IP 20 & IK20 (iv) Front cover: - Polycarbonated Cover for More protection (v) Mounting: - On Armstrong/Grid Ceiling (vi) Finish: - Epoxy powder coated with any additional treatment for smooth and anti corrosive finish. (vii) Lamp: - High bright LED with Lens (viii) System Efficacy (lm/W) of the luminaries: - Not less than 120 lm/watt. (ix) Colour temperature (K): - Not less than 6500 (x) Color Rendering Index (CRI): - Not less than 80 (xi) Life: - Not less than 50000 Hrs of operation @ Ta 35*C (xii) Optics: - Spread (Beam angle along the driveway) - 120°, Through (Beam angle across the driveway)- 60°, Beam pattarn- Asymmetrical driveway. (xiii) Control gear: - inbuilt electronic driver with 325V Auto Cut off Restart feature, PF not less than 0.95 and THD less than 10% at full load with operating voltage 140-270V AC, 50 Hz. (xiv) Surge protection: - inbuilt surge protection minimum 4KV. (xv) Heat Shink: - As per OEM's design (xvi) feature : ( COOL DAY WHITE ) or (WARM WHITE ) as required. Make: - PHILIPS/HAVELLS/WIPRO/CROMPTON NOTE : (i) The Contractor has to make good of surface / ceiling damaged during fixing of the lights/fittngs as per existing surface/ceiling whatever it may be hence it is advised to visit the site before quoting rate. (ii) The contractor has to provide related T&P items required at site.

Supply and Fixing LED Round Surface Mounted Downlighter fittings on Ceiling including taking down old unsv LED down lighter all as conforming to the following parameters: - (i) Syatem watt/Lumens: - Max 18 watts/total system lumen not less than 2000 lm (ii) Housing: - Single Piece die cast aluminium body (iii) IP Rating & IK Rating: - IP 20 & IK20 (iv) Front cover: - Polycarbonated Cover for More protection (v) Mounting: - On ceiling (vi) Finish: - Epoxy powder coated with any additional treatment for smooth and anti corrosive finish. (vii) Lamp: - High bright LED (viii) System Efficacy (lm/W) of the luminaries: - Not less than 110 lm/watt. (ix) Colour temperature (K): - Not less than 6500 (x) Color Rendering Index (CRI): - Not less than 80 (xi) Life: - Not less than 30000 Hrs of operation. (xii) Optics: -Diffused (xiii) Control gear: - PF not less than 0.90 and THD less than 20% at full load with operating voltage 140-270V AC, 50 Hz. (xiv) Surge protection: - inbuilt surge protection minimum 2KV. (xv) Heat Shink: - As per OEM's design (xvi) ( COOL DAY WHITE ) or WARM WHITE as per requirement Make: - PHILIPS/HAVELLS/WIPRO/CROMPTON NOTE : (i) The Contractor has to make good of surface / ceiling damaged during fixing of the lights/fittngs as per existing surface/ceiling whatever it may be hence it is advised to visit the site before quoting rate. (ii) The contractor has to provide related T&P items required at site.

Supply and Fixing LED Round Recessed Mounted Downlighter fittings on recessed Ceiling including taking down old unsv led down lighter all as conforming to the following parameters: - (i) Syatem watt/Lumens: - Max 15 watts/total system lumen not less than 1500 lm (ii) Housing: - Single Piece Aluminium die cast body (iii) IP Rating & IK Rating: - IP 20 & IK20 (iv) Front cover: - Polycarbonated Cover for More protection (v) Mounting: - On Recessed ceiling (vi) Finish: - Epoxy powder coated with any additional treatment for smooth and anti corrosive finish. (vii) Lamp: - High bright LED (viii) System Efficacy (lm/W) of the luminaries: - Not less than 100 lm/watt. (ix) Colour temperature (K): - Not less than 6500 or Not less than 3000 (x) Color Rendering Index (CRI): - Not less than 80 (xi) Life: - Not less than 50000 Hrs of operation. (xii) Optics: -Diffused (xiii) Control gear: - PF not less than 0.95 and THD less than 10% at full load with operating voltage 140-270V AC, 50 Hz. (xiv) Surge protection: - inbuilt surge protection minimum 2.5KV. (xv) Heat Shink: - As per OEM's design (xvi) COOL DAY WHITE OR WARM WHITE as per requirement Make: - PHILIPS/HAVELLS/WIPRO/CROMPTON NOTE : (i) The Contractor has to make good of surface / ceiling damaged during fixing of the lights/fittngs as per existing surface/ceiling whatever it may be hence it is advised to visit the site before quoting rate. (ii) The contractor has to provide related T&P items required at site.

Supply and Fixing LED Flood Light fittings with complete fixing arrangemnets including taking down old unsv led flood light all as conforming to the following parameters: - (i) Syatem watt/Lumens: - Max 50 watts/total system lumen not less than 5000 lm (ii) Housing: - Single Piece Aluminium die cast body (iii) IP Rating & IK Rating: - IP66 & IK07 (iv) Front cover: - Polycarbonated Cover for More protection (v) Mounting: - With complete fixing arangement, (vi) Finish: - Epoxy powder coated with any additional treatment for smooth and anti corrosive finish. (vii) Lamp: - High bright LED (viii) System Efficacy (lm/W) of the luminaries: - Not less than 100 lm/watt. (ix) Colour temperature (K): - Not less than 6500 (x) Color Rendering Index (CRI) & SDCM: - Not less than 70, <5 (xi) Life: - Not less than 50000 Hrs of operation at Ta 45*C (xii) Optics: -Diffused (xiii) Control gear: - PF not less than 0.90 and THD less than 10% at full load with operating voltage 140-270V AC, 50 Hz. (xiv) Surge protection: - inbuilt surge protection minimum 4KV. (xv) Heat Shink: - As per OEM's design (xvi) (a). Bidder has to compulsorily submit the LM-79 and LM-80 and third party NABL accredited lab test report conforming of technical spscifications and consolidated lab report for the offered LED has to be stractured in the same sequence. Make: - PHILIPS /HAVELLS/WIPRO/CROMPTON NOTE : (i) The Contractor has to make good of surface / ceiling damaged during fixing of the lights/fittngs as per existing surface/ceiling whatever it may be hence it is advised to visit the site before quoting rate. (ii) The contractor has to provide related T&P items required at site.

supply and Fixing LED Flood Light fittings with complete fixing arrangemnets,including taking down old unsv led flood light all as conforming to the following parameters: - (i) System watt/Lumens: - Max 120 watts/total system lumen not less than 14500 lm (ii) Housing: - Single Piece Aluminium die cast body (iii) IP Rating & IK Rating: - IP66 & IK07 (iv) Front cover: - Polycarbonated Cover for More protection (v) Mounting: - With complete fixing arangement, (vi) Finish: - Epoxy powder coated with any additional treatment for smooth and anti corrosive finish. (vii) Lamp: - High bright LED (viii) System Efficacy (lm/W) of the luminaries: - Not less than 120 lm/watt. (ix) Colour temperature (K): - Not less than 6500 (x) Color Rendering Index (CRI) & SDCM: - Not less than 70, <5 (xi) Life: - Not less than 50000 Hrs of operation at Ta 45*C (xii) Optics: -Diffused (xiii) Control gear: -Outcutt off @325V, 440V phase 2 phase protection, PF not less than 0.95 and THD less than 10% at full load with operating voltage 140-270V AC, 50 Hz. (xiv) Surge protection: - inbuilt surge protection minimum 4KV. (xv) Heat Shink: - As per OEM's design (xvi) Bidder has to compulsorily submit the LM-79 and LM-80 and third party NABL accredited lab test report conforming of technical spscifications and consolidated lab report for the offered LED has to be stractured in the same sequence. Make: - PHILIPS/HAVELLS/WIPRO/CROMPTON NOTE : (i) The Contractor has to make good of surface / ceiling damaged during fixing of the lights/fittngs as per existing surface/ceiling whatever it may be hence it is advised to visit the site before quoting rate. (ii) The contractor has to provide related T&P items required at site.

Supply and fix in repairs LED inverter bulb 9 watt retrofit type works on AC Normal mode and DC supply in inverter mode with inbuilt battery back up of up to 4 hours, high efficiency high lumens output ,including taking down old unsv led bulb complete all as specified and directed. Make: Crompton /Philips/Wipro. NOTE : - (i) The Contractor has to make good of surface / ceiling damaged during fixing of the lights/fittngs as per existing surface/ceiling whatever it may be hence it is advised to visit the site before quoting rate. (ii) The contractor has to provide related T&P items required at site.

Supply and Fixing LED 1 x 1 feet recess Mounted light fittings on receesed Ceiling including brackets all as conforming to the following parameters including taking down old unsv Light fitting: - (i) Syatem watt/Lumens: - Max-18 watts/total system lumen not less than 1440 lm on each side (ii) Housing: - CRCA (iii) IP Rating: - IP 20 (v) Mounting: - recessed mounting (vi) Finish: - Opal PMMA Diffuser (vii) Lamp: - High bright LED (viii) System Efficacy (lm/W) of the luminaries: - Not less than 80 lm/watt. (ix) Colour temperature (K): - Not less than 5700( COOL DAY WHITE ) (x) Color Rendering Index (CRI): - Not less than 80 (xi) Life: - Not less than 35000 Hrs of operation (xii) Optics: - Fully Diffused (xiii) Control gear: - inbuilt electronic driver, PF not less than 0.90 and THD less than 10 % with operating voltage 140-27V AC, 50 Hz (xiv) Surge protection: - inbuilt surge protection minimum 2 KV (xv) Heat Shink: - As per OEM's design (xvi) Bidder has to compulsorily submit the data sheet report conforming of technical spscifications. (xvii) COOL DAY WHITE OR WARM WHITE as per requirement Make: - Havells /PHILIPS/WIPRO NOTE : (i) The Contractor has to make good of surface / ceiling damaged during fixing of the lights/fittngs as per existing surface/ceiling whatever it may be hence it is advised to visit the site before quoting rate. (ii) The contractor has to provide related T&P items required at site.

Supply and Fixing LED 4 x 1 feet Surface Mounted light fittings on Ceiling including all accessories and frame required as conforming to the following parameters including taking down old unsv Light fitting: - (i) Syatem watt/Lumens: - Max- 42 watts/total system lumen not less than 4000 lm on each side (ii) Housing: - CRCA/ Aluminum (iii) IP Rating: - IP 20 (v) Mounting: - recessed mounting (vi) Finish: - Opal PMMA Diffuser (vii) Lamp: - High bright LED (viii) System Efficacy (lm/W) of the luminaries: - Not less than 90 lm/watt. (ix) Colour temperature (K): - Not less than 5700( COOL DAY WHITE ) (x) Color Rendering Index (CRI): - Not less than 80 (xi) Life: - Not less than 35000 Hrs of operation (xii) Optics: - Fully Diffused (xiii) Control gear: - inbuilt electronic driver, PF not less than 0.90 and THD less than 10 % with operating voltage 140-27V AC, 50 Hz (xiv) Surge protection: - inbuilt surge protection minimum 2 KV (xv) Heat Shink: - As per OEM's design (xvi) Bidder has to compulsorily submit the data sheet report conforming of technical spscifications. (xvii) Cool day white or warm white as per requirement Make: - Havells /PHILIPS/WIPRO/CROMPTON NOTE : (i) The Contractor has to make good of surface / ceiling damaged during fixing of the lights/fittngs as per existing surface/ceiling whatever it may be hence it is advised to visit the site before quoting rate. (ii) The contractor has to provide related T&P items required at site.

Supply and Fixing LED 4 x 1 feet recess Mounted light fittings on receesed Ceiling including acessories and frame required to fix the fitting on false ceiling all as conforming to the following parameters including taking down old unsv Light fitting: - (i) Syatem watt/Lumens: - Max-36 watts/total system lumen not less than 3600 lm (ii) Housing: - CRCA (iii) IP Rating: - IP 20 (v) Mounting: - recessed mounting (vi) Finish: - Opal PMMA Diffuser (vii) Lamp: - High bright LED (viii) System Efficacy (lm/W) of the luminaries: - Not less than 100 lm/watt. (ix) Colour temperature (K): - Not less than 5700( COOL DAY WHITE ) (x) Color Rendering Index (CRI): - Not less than 80 (xi) Life: - Not less than 50000 Hrs of operation (xii) Optics: - Fully Diffused (xiii) Control gear: - inbuilt electronic driver, PF not less than 0.90 and THD less than 10 % with operating voltage 140-27V AC, 50 Hz (xiv) Surge protection: - inbuilt surge protection minimum 4 KV (xv) Heat Shink: - As per OEM's design (xvi) Bidder has to compulsorily submit the data sheet report conforming of technical spscifications. (xvii) cool day white or warm white as per requirement Make: - Philips /HAVELLS/WIPRO/CROMPTON NOTE : (i) The Contractor has to make good of surface / ceiling damaged during fixing of the lights/fittngs as per existing surface/ceiling whatever it may be hence it is advised to visit the site before quoting rate. (ii) The contractor has to provide related T&P items required at site.

Supply and Fixing LED 2 x 2 Surface Mounted fittings all as conforming to the following parameters including taking down old unsv fitting : - (i) Syatem watt/Lumens: - Max 35 watts/total system lumen not less than 3200lm (ii) Housing: - Single Piece CRCA body (iii) IP Rating & IK Rating: - IP 20 (iv) Front cover: - Polycarbonated Cover for More protection (v) Mounting: - surface mounted (vi) Finish: - Epoxy powder coated with any additional treatment for smooth and anti corrosive finish. (vii) Lamp: - High bright LED with Lens (viii) System Efficacy (lm/W) of the luminaries: - Not less than 90 lm/watt. (ix) Colour temperature (K): - Not less than 6500( COOL DAY WHITE ) (x) Color Rendering Index (CRI): - Not less than 80 (xi) Life: - Not less than 50000 Hrs of operation @ Ta 35*C (xii) Optics: - diffused (xiii) Control gear: - PF not less than 0.90 and THD less than 10% at full load with operating voltage 140-270V AC, 50 Hz. (xiv) Surge protection: - NA (xv) Heat Shink: - As per OEM's design (xvi)Cool day white or warm white as per requirement Make: - PHILIPS/WIPRO/HAVELLS/CROMPTON NOTE : (i) The Contractor has to make good of surface / ceiling damaged during fixing of the lights/fittngs as per existing surface/ceiling whatever it may be hence it is advised to visit the site before quoting rate. (ii) The contractor has to provide related T&P items required at site.

S & F in repairs MCB TPN complying to IS/IEC 60898, 240 volts 'B' Curve 10 KA with energy limiting class 3. The MCB shall have 50% lower watt loss as required by IS/IEC 60898 from 63A to 100A . The mcb shall have the unique property of di-electric strength, arc resistance, insulation, flame retardancy and temperature resistance, including connection with suitable size copper lugs, The MCB shall give visible flag indication when MCB trips on Short Circuit Fault. The MCB shall have safety shutter to avoid any wrong insertion of cable including connection with suitable size copper lugs complete all as directed. All the above-mentioned specs technical documents from OEM shall be provided at the time of bidding of following capacity Make: Legrand, L&T, ABB, Schneider, C&S.

MCB TPN 63 Amps, 415 volts

MCB TPN 100 Amps, 415 volts

Material and Labour for PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) in foundations, filling and mass concrete complete for making foundation for mounting flood light /bollard light fitting etc complete all as directed.

Supply only PVC self adhesive electrical insulation tape (1.8cmx7mtrx0.12mm) Size. Make : Steelgrip/Kingle/Anchor

JS CONSTRUCTION COMPANY

JAIN BUILDERS

KRISHANA ELECTRIC WORKS

Tarachand gurudutt

PARADISE INFRA POWER COMPANY

Bhanu Prakash

BK CONSTRUCTION