CWE KOTA/ALW-29 OF 2020-21 SPECIAL REPAIR TO CERTAIN BUILDINGS OF OR ACCN AT ITARANA CANTT ALWAR

Amount

B/R ITEMS Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars & precast concrete mosonry etc. and removal all rubbish material complete all as specified directed.

BLANK

Taking down cement or cement lime plaster any description, on brick or stone walls, etc. including raking out joints, hacking for key & scrubbing down with water, etc. & removing rubbish off the premises, complete all as directed.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed.

Dismantling of stone slabs in roofs, suspended floors, chajjas, built in cement mortar including all quions, pillars etc, complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and pavings not exceeding 15 cm thickness below or above ground level and removal all rubbish material complete all as directed..

Demolition of reinforced cement concrete of any description and in any position mortar including all quions, pillats etc. complete all as specified and directed.

Dismantling of cement concrete tiles in floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Taking up or down steel tubing and connections including cleaning for refixing or removal complete all as specified and directed :-

15mm bore.

20mm bore.

25 or 32mm bore.

Taking down chowkhats or frames with shutters (without taking off shutters from frame)n exc 1.5 sqm each complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from frame) exc 1.5 Sqm but n exc 4 Sqm each complete all as directed.

Supply and Fixing 110mm PVC (SWR) WC connector bent type, complete all as specified and directed.

Distmanting of wall and any type of ceiling board (fibre, pulp, insulation etc) or insulation boards/slabs/blankets, any thickness, including cover fillets, complete all as specified and directed.

Dismantling AC sheet (corrugated, semi corrugated etc.) as in roof etc. including ridges, complete all as specified and directed.

Demolition and breaking up drain pipe of 150mm dia (salt glazed stone ware, AC or reinforced concrete) set in cement mortar including PCC bedding and haunching etc complete all as specified and directed.

Dismantling water tank of capacity exceeding 500 Ltrs but not exceeding 1000 Ltrs and removal from site complete all as specified and directed .

Excavation in trenches n. exc 1.5 metre wide and not exceeding 1.5 m deep for foundations, laying under ground cables etc and getting out in soft/ loose soil, complete, all as specified and directed.

Returning filling in including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick,complete, all as specified & directed.

Removal of excavated surplus spoil to a distance n.exc 50m and depositing where directed at level not exceeding 1.5 m above the starting point,complete, all as specified and directed .

M & L for cement concrete 1:3:6 type C2 (using 40 mm graded stone aggregate) as in plinth protection 50 mm thick laid in bays and surfaces finished even and fair, including filling the joints with bitumen mastic complete all as specified and directed

M & L 25 mm thick PCC 1:2:4 type B-0, using 12.5 mm graded stone aggregate as in bedding layer of floor finisehd the surface even and fair complete all as specified and directed.

M & L for 75mm thick PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in sub base of floor finished even and fair surface complete all as directed.

M&L extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement, including forms, moulds, mitred/stopped ends complete all as specified and directed.

M & L for PCC (1:2:4) type B-0 using 12.5mm graded stone aggregate as in coping with and including necessary form work complete all as specified and directed.

M & L for PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in surface channels and drains complete all as specified and directed.

M & L for Precast Reinforced cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in drain/manhole covers set in CM 1:6 complete all as specified and directed. Note:- Reinforcement shall be measured & paid separately.

M & L for PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in foundation, filling in and mass concrete complete all as directed.

M & L for concrete bed type (1:4:8) type D-2 using 40mm graded stone aggregate as drain pipes 150mm internal dia including packing under and haunching against the sides of pipes after they are laid & tested dia concrete complete all as specified and directed.

M&L for salt glazed stoneware drain pipes 150mm internal laid in trenches & jointed complete all as specified and directed.

M&L for cutting into existing manholes for conecting new 150mm internal dia drain pipe, making good pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 complete all as specified and directed.

M&L for rendering 5 mm thick in cement mortar 1:3 as in ceiling and finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick in CM 1:4 on other than fair face of brick masonry surface or on stone masonry surfaces finished even and smooth without using extra cement mixed with liquid water proofing admixture as per manufacturer instructions, complete all as specified and directed. Note:- Liquid water proofing admixture shall be measured and paid separately.

Supply only liquid water proofing admixture complete all as specified and directed.

M & L for form work to sides and soffit of floor or floor beam, beam hauchings, girders, bressummers, lintels, cantilevers, shelves incluidng supports, overhangs etc also splays between floors and bemss etc. rough finish flat surfaces on concrete complete all as specified and directed.

M & L for use and waste of form work to soffits of suspended slabs such as roof slab n. exc 200mm thick complete all as specified and directed.

M & L for form work to edges of concrete flats, threads, breaks in floors, windows cills, concrete, railings, floor and roof n exc 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10 cm but n exc 20 cm wide complete all as specified and directed.

M & L for M-25 RCC Design Mix using 20mm grade stone aggregate in for beams, cantilevers, bressummers and lintels over 1.5m span complete all as specified and directed.

M & L for M-25 RCC design Mix using 20mm grade stone aggregate in for slabs supported on walls, beams and columns in floors, roofs etc. complete all as specified and directed.

M&L for rendering 10 mm thick in cement mortar 1:6 on fair face of brickwork, masonry wall surfaces or on stone masonry surfaces and finished even and smooth without using extra cement complete all as specified and directed.

M & L for applying two coats of distemper oil emulsion over a coat of alkali resistant primer of approved shade over on newly plaster surface of walls, complete all as specified and directed.

M & L for preparing new plastered surfaces of walls and applying two coats of cement paint, complete all as specified and directed.

M & L for preparing newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M & L for preparing old plastered or unplastered ceiling surfaces and applying two coats of white wash complete all as specified and directed.

M & L Rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement, complete all as specified and directed.

M&L 450x350x7-8mm thick joint free glazed ceramic coloured tiles as in vertical surfaces such as skirting or dado set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over and including 10mm thick rendering in cement sand mortar 1:4 complete all as specified and directed.

M & L for non skid ceramic tiles (coloured) 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm joint free as in floors and including 15mm thick screed bed in CM 1:6 laid on floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and as directed.

M & L for non skid ceramic tiles (coloured) 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as in floors and including 15mm thick screed bed in CM 1:6 laid on floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and as directed.

M & L for non skid ceramic tiles (coloured) 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm joint free as in skirting over and including 10mm thick screed bed in CM 1:6 including necessary cutting of tiles set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and as directed.

S &F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm thick plain colour PVC sheet reinforced with mild steel square tube fixing in opening complete all as per specifications and drawings as applicable to item 08095 given in SSR Part – II (2010).

M&L Brick work with sub class 'B' bricks straight or curved on plan exc 6 metre mean radius built in cement mortar (1:4), complete, all as specified & directed.

M & L for brick work with FLY ASH BRICKS straight or curved on plan exc 6 mean radius, built in CM 1:6 complete, all as specified & directed.

M & L for brick work (EXCEPT BRICKS) straight or curved on plan exc 6 mean radius , built in CM 1:6 complete, all as specified & directed. Note:- Re-use bricks obtained from item No. 01 above.

M & L for brick work with FLY ASH BRICKS straight or curved on plan to any radius , built in CM 1:4 as in half brick wall complete, all as specified & directed.

M & L for brick work with FLY ASH BRICKS (As per IS-13757 -1993) burnt clay fly ash building bricks) (OLD SIZE BRICKS) with width equal to the length of the brick laid dry & flat abutted with each other with gap between adjacent brick 10mm over UG calbe for protection complete all as directed.

M & L for machine cut Kota stone slab 20 to 25 mmthick as in floor, cooking platform, treads etc laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing over and including cement screed base (bedding layer) of 20mm thick in CM 1:6 for laying floor finishes complete all as specified and directed. Note:- Size of Kota Stone slab not less than 550mm x 550mm.

M & L for 20-25mm thick machine cut Kota stone as in riser such as steps, skirting, dado and pillar set etc over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing over and including10mm thick cement plaster in CM (1:4) on other than fair faces of brick work or stone surfaces of walls complete all as specified and directed.

S&F steel water tubing, galvanized, medium grade, with all fittings, fixed to walls and ceiling or in floor complete all as specified and directed for following sizes:-

15mm bore.

20mm bore.

25mm bore.

Refixing old steel tubing and connections in new or old position (walls, ceiling, floor etc ) complete all as specified and directed for following bore:- Note : Old serviceable water tubing retrieved from taking down here-in-before shall be used. The quoted rate shall deemed to include new GI fittings (ISI marked). Old fittings shall not be used.

15mm bore.

20mm bore.

32mm bore.

S & F in repair 15 mm bore angle stop valve of copper alloy, fancy type, chromium plated screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for union complete all as specified and directed.

S&F in repairs 15mm bore PVC connections, with PTMT nuts of length 600mm complete all as specified and directed.

S & F PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors pipe including taking out old unserviceable PVC/CI Pipe, complete all as specified and directed for the following sizes:-

75mm bore.

110mm bore.

S & F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall with holder bat clamps of GI Flat iron 25x3mm including taking out old unserviceable PVC/CI Pipe, complete all as specified and directed for the following sizes:-

75mm bore.

110mm bore.

S&F PVC (SWR) bends any radius complete all as directed for the following sizes:-

75mm bore.

110mm bore.

S & F 75mm PVC (SWR) junction single (Single T) equal or uneaqual, complete all as specified and directed.

S&F PVC (SWR) 110 mm bore reducers complete all as specified and directed.

S&F PVC (SWR) 110 mm bore junction single (Single T) equal or unequal with access door complete all as specified and directed.

S & F PVC (SWR) branch piece, single (single Y) equal or unequal for 110 mm bore of pipe complete all as specified and directed.

S & F PVC (SWR) vent cowl for 75 mm bore of pipe complete all as specified and directed.

S & F PVC (SWR) floor trap, plain with grating including jointing with solvent cement dia of outlet 75 mm bore complete all as directed.

S&F in repairs vitreous China squatting pan, Orissa pattern, size 580mm x 440mm white with integral foot rests and 'P' or 'S' trap, including provision of cement concrete bedding, connection to trap and flushing pipe etc. complete including making good to disturbed surfaces of floor to match with existing specifications complete all as specified and directed .

S&F in repairs PVC low level flushing cistern10 litre capacity with intel ball valve float & handle, syphonic action type including brackets & flush pipe of polythylene of low or high density or PVC 32mm dia for LLFC fixed complete all as specified and directed .

S & F ball valve high pressure of PTMT suitable for 25mm bore pipe (minimum weight -210Gm) with epoxy coated aluminum rod and high density plastic ball screwed for iron pipe and fixed complete all as specified and directed. Make:- PRAYAG or equivalent as specified in Appendix 'D'.

M&L in repair for gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed of size 25mm dia complete all as specified and directed.

S & F in repairs 4mm dia plain mild steel wire, galvanised class 3 in detached work such as for mosquito nets and fixing to straining bolts, hooks, eyes, etc. complete all as specified and directed.

S & F factory made steel windows, box type, any size (XW2) M/F) double shutter, one openable shutter with glazing bars and other openable shutter without glazing bars, fabricated with members of standard size as shown on drawings including frames, complete all as specified and directed. (Note :- The quoted rates shall be deemed of lugs and FI required for fixing wire cloth, sheet Glass, Grills, iron mongry and guard bars as shown on drg and applying two coats of synthetic enamel paint over a coat of red oxide primer).

Supply only stainless steel wire cloth 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks galvanised stainless steel wire staples complete all as directed.

S & F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks galvanised stainless steel wire staples complete all as directed.

M & L false ceiling with Armgyp-FB or equivalent ceiling tiles of 595 x 595 (as approved by GE) fixed with and including galvanised iron powder coated inverted 'T' or 'L' section (consealed GI frame work) of mettalic or equivalent suspended from ceiling with provn of galvanised wire 4 mm dia and wall taping screw including butterfly clips, hold down clips for fixing the board to frame complete all as per manufactures instructions all as directed and specified. (Note:- (a) size of main tee 38 x 24 mm (Armstrong). (b) size of wall angle 19x19 mm (Armstrong). (c) size of grid 600x 600 mm.) (c) Size of cross Tee - 38 x 24mm (Armstrong).

S & F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour (as approved by GE) having tensile strength of 550 Mpa as in roof covering/cladding to walls, fixed with self tapping screws complete all as specified and directed.

S & F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour (as approved by GE) having tensile strength of 550 Mpa as in roof covering/cladding to walls, fixed with self tapping screws complete all as specified and directed.

S&F mild steel work in tubular trusses, purlins including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS-1161-1979 grade St-240 including notching, drilling, fitting, riveting and/or welding or connecting with bolts and nuts including rivets or nuts and bolts, providing and fixing cleats, fish plates, gusset plates etc and also for wedging, plumbing, turning up & fixing complete all as specified and directed.

S & F for mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5 cm but n exc 10 cm long and dia of shank 11 to 15 mm, complete all as specified and directed.

M&L for framed work using angle iron, round bars as in security doors or gates with end of bars shoulders and or rivetted or forged into spikes guard bars barred into iron doors, walkways railing framework and similar work conforming to FE-290 Gde E-195 complete all as specified and directed.

M&L 35mm thick factory made 2nd class glazed and skeleton door shutters open rebated of second class hard wood rail and styles(Hollock), prepared to receive glass/gauge etc without sash bars, edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass/gauge etc. The size of rails & style as specified in SSR Part-I (2009) section 8 and as per IS-1003(Part-I) kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401 complete all as specified and directed. The shutter shall be fitted to the chowkhats as directed

S&F 35mm thick factory made IInd Class Hard wood plain framed, panelled shutter(two panel) with lock rail and panel of 9mm B.W.P. commercial ply seasoned & chemically pressure treated /12mm thick particle board veneered with commercial veneering on both faces. The size of rails & style as specified in SSR Part-I (2009) section 8 and as per IS-1003(Part-I) kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401 complete all as specified and directed.

S&F for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

M&L preparation old steel surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint of 1st grade quality complete all as specified and directed.

M & L for preparation of new or previously untreated wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint of approved shade over one coat of pink primer complete all as specified and directed.

M & L for applying 1-2mm thick wall care putty in two layers on newly plaster surface of walls to achieve smooth complete all as specified and directed.

S & F 100mm mild steel butt hinges medium weight colled rolled ISI marked complete all as specified and directed.

S & F 100mm stainless steel butt hinges heavy weight ISI marked complete all as specified and directed.

S & F 200mm long aluminium anodised barrel tower bolt of extruded section and fixed, complete all as specified and directed.

S & F 150mm long aluminium anodised barrel tower bolt of extruded section and fixed, complete all as specified and directed.

S&F 125mm size aluminium handle, cast type anodised complete all as specified and directed.

S&F 150mm size aluminium handle, cast type anodised complete all as specified and directed.

S&F 250mm long aluminium allot anodized sliding door bolts with hasp & staples (Bolt Type) and fixing clips of sheet, cat or extruded sections and fixing bolts and sliing bolts of extruded section or cast-aluminium alloy and fixed complete all as specified and directed.

S&F 300mm long mild steel sliding door bolts with hasp & staples type, stove enamelled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, 04 on bolt plate and 02 on staple plate and fix complete all as specified and directed.

S&F 140mm long floor door stopper of aluminium alloy body and tongue, annodised, with hard drawn steel spring fixed in floor complete all as directed.

S&F mild steel helical door spring duly painted including roller and roller plate complete all as specified and directed .

M & L cutting and punning in brick walls for cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as directed.

M&L screed bed or bedding layer of mortar over PCC padding , 15 mm thick, in cement mortar 1:4, mixed with water proofing admixture liquid type as per manufactures instructions on top of chajjas, parapet and over roof slabs finished even and smooth without using extra cement complete all as specified and directed. Note : Liquid water proofing admixture shall be measured and paid separately.

M & L for TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed.

M & L for TMT bars 6mm to 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed.

M & L for TMT bars 5mm dia and over upto & inclduing 10mm dia in stirrups, spacers & binders cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed.

Taking down carefully existing bitumen tarfelt, including plaster of any description over the surfaces of roof, terraces including flashings and junctions of parapets/ curb walls etc and removing of the rubbish to a distance exc. 500m but n exc. 1.00 km and depositing whre directed, complete all as specified and directed.

Supply fabrication and fixing powder coated (Thickness of powder coating not less than 50 micron) as in ventilators half fixed and half louvers type and small window single leaf cut to size, jointed together wih cadmium plated steel screws including rubber packing, aluminium beading or gasket for aluminium sections for fixing glass sheet and necessary fittings complete, screws plugs, handle, tower bolt, stay hocks etc complete all as specified and directed. Note :- (i) Weight of aluminium sections shall only be measured. (ii) The supply only rate of glass sheet will be measured seperately.

S & F curtain rod of metalic 20mm dia with chromium plated including bracket both side fixed in position by drilling holes in walls and fixed the brackets with rawl plug and steel screw complete all as specified and directed.

S&F rotational moulded polythylene water tanks triple layers (Cylindrical vertical with closed top) of any capacity and fixed in same position capacity of tank in 1000 Ltrs and including all necessary fittings complete all as specified and directed.

M&L for laying 60mm thickness machine pressed precast concrete interlocking paver block with any shape and size confirming to IS 15658-2006 M-35 grade grey cement and no pigment laid over sand cushinong and including 25cm thick sand cushioning complete all as specified & directed.

Supply and fix APP polymeric water proofing membrane, minimum 3mm thick and weighing not less than 3.5 Kg/Sqm of make super thermolay manufactured by STP Ltd or ‘Hyper Plas’ (Polyster) manufactured by M/S IWL Ltd or ‘Shaliplas’ (polyester) manufactured by M/S Capital Steels and chemicals Pvt Ltd as approved by GE, black finish reinforced with non-woven polyester matt (weighing not less than 150 gm/Sqm), with a thermo fusable finish laid over compatible bitumen primer (Bitumen primer shall be TANK MASTIC of M/S STP Ltd or ‘EMW FLATE’ of M/S Texas India Ltd} at the rate of 0.40 Kg/Sqm torching overlaps with a propane or a butane gas torch, with a overlap of 75mm at the sides and 100mm at the ends and sealing including applying a coat of cold emulsion bituminous primer all as per manufacturer’s instructions, complete all as specified and as directed. Note :- (i) Coved fillets in PCC(1:2:4) type B-0 using 12.5mm graded stone aggregate, of radius 75mm shall be provided at the junction of roof and parapet wall/mumty/chimney/other vertical surfaces and thereafter surface painted with hot paving bitumen of Grade 30/40 confirming to IS-73, [email protected] Kg/Sqm over a coat of bituminous primer confirming to IS-3384 applied @ 0.40 Kg/Sqm. (ii) Polymeric membrane shall be taken to a height of 60cm (minimum) and then inserted inside the groove of parapet wall of brick masonry and shall be finished by a membrane flushing. (iii) The waterproofing treatment shall be got carried out by the manufacturer or their authorized applicators. (iv) In case of stone masonry parapet wall etc a groove of size 25mmx25mm(minimuim) shall be made in coved fillet at the junction of roof and parapet wall/mumty Chimeny/other vertical surfaces and polimeric membrane insterted in groove and sealed with paving bitumen. (v) Exposed surfaces of APP membrane shall be applied with one coat of bituminous aluminium paint @ 150 ml/Sqm. (vi) Above aspects are deemed to be included in quoted rate.

S&F in repairs brass chromium plated shower rose fancy type 125mm size fixed to 15mm GI steel pipe or union complete all as specified and directed.

S&F corner glass shelf size 200mm x 200mm, 6mm thick outer edges rounded fixed to wall with chromium plated brass brackets, screws and wooden/ plastic plug complete all as specified and directed. Make:- PRAYAG or equivalent as specified in Appendix 'D'.

S&F stainless steel peg set (Set of 06 each) fixed with chromium plated brass screws and wooden/ plastic plug complete all as specified and directed. Make:- PRAYAG or equivalent as specified in Appendix 'D'.

S & F 100mm size Grating Round of PTMT (Minimum weight 25 gms) complete all as specified and directed. Make:- PRAYAG or equivalent as specified in Appendix 'D'.

S & F in repairs vitreous china wash basin, light colour, flat back, size 550 x 445 mm including one No PVC waste pipe 25 mm dia and 75 cm long with 32 mm dia connector, 32mm size waste fittings, brass chromium plated with long screwed shanks and fly nuts, flange end, bedded in red lead cement and other fixed complete including cutting for and pinning in ends of bracket or erecting stand complete all as specified and directed.

S & F 32mm dia high density polythylene (HDPE) pipes of pressure rating 6kg/sq cm laid in floor or fixed to walls including taking down old pipes complete all as specified and directed.

S & F 40mm dia high density polythylene (HDPE) pipes of pressure rating 6kg/sq cm laid in floor or fixed to walls including taking down old pipes complete all as specified and directed.

S & F in repair for 15 mm bore pillar cock with aerator, half turn, cast copper alloy chromium plated with capstan head screwed down high pressure, with or without lettered HOT or COLD with long screwed shanks and fly nuts, screwed fly nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repair 15mm dia bib tap cast copper alloy fancy type half turn with wall flange chromium plated with capstan head screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S & F brass chromium plated tubular towel rail, 20mm dia, “D” type, 60cm long between flanges, fixed with chromium plated brass screws complete all as specified and directed.

S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails mild steel frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppy and fixing in the frame at site complete all as per specifications and drawings as applicable to item 08080 given in SSR Part – II.

E/M ITEMS Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete including teak wood battens/PVC casing caping and making good disturbed surfaces of walls, floors & ceiling etc.including dismentling of fittings to match with existing surfaces, complete all as specified and directed.

M & L for point wiring complete with 1.5 Sqmm single core unsheathed stranded copper conductor cable of 1100 volts grade PVC insulated and unsheathed FRLS cable enclosed in and including PVC casing and capping not less than 20mm width with MS sheet metal sunken switch/terminal box 1.2mm thick and phenolic laminated sheet cover 3.0mm thick and brass screws with cup washers with all necessary wall cutting and making good distrubted surface as directed, including all necessay wall cutting and making good disturbed surface including 1.5 Sq.mm solid copper conductor with green PVC FRLS insulated unsheathed earth continuity conductor to common earth & connecting to earth dolly for the following :-

One light point controlled by one, one way switch

One fan point controlled by one switch and regulator.

One 3 pin 5/6 Amp socket outlet controlled by one 5 Amp switch on same board.

One 3 pin 5/6 Amp socket outlet controlled by one 5 Amp switch on independent board.

All as per description of serial item No. 126.00 here-in-before but for one 3 pin socket outlet 15 Amps with 2.50 sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade including 1.50 sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade as continous earth wire in green colour complete all as specified and directed.

S & F switch piano flush type 5/6 Amps single pole one way 230 volts complete all as specified and directed.

S & F switch piano flush type 15 Amps single pole one way 230 volts complete all as specified and directed.

S & F, socket outlet 3 pin(with 2 pin outlet also), 5/6 Amp flush type, 240 volts all as specified & directed.

S&F socket outlet two-in-one, 3 pin, 5 Amp and 15 Amp, flush type , 240 Volt complete all as specified & directed.

S & F ceiling rose surface bakelite 65x50mm with two or three terminal complete all as specified and directed.

S&F decorative ultra slim liner LED lighting fixture with extended poly carbonate environmental friendly, energy efficient suitable for 16W to 20W with LED tube of model E-LITE LED pride and connecting up with the fitting from ceiling rose/connector using copper flexible cord of size 1.5sqmm, 3 core of suitable length complete all as specified and directed. Make :- Havelles Cat Part No LHEXBHP71N1W018 or equivalent of Philips/Cromption Greaves/Bajaj/Wipro/GE.

S & F for lamp holder, metal cased body of brass with with back plate suitable for batten fittings complete all as specified and directed.

Supply and fixing Adore LED lamps of 9/10 Watt and including taking down old u/s CFL lamp complete all as specified and directed. Make - Cat Part No LHLDERHEML8X010 of make Havells or equivalent model of make Philips/Cromptom/ Greaves/Wipro/ Bajaj

Supply & Fixing of stepped type electronic fan regulator flush type and connecting up , ISI marked , 240 Volts complete all as specified and directed.

S & F sheet metal enclosure double door DB SPN 8 way, 240 volts protection class IP-43 made out of CRCA mild steel sheet surface with epoxy powder coated surface confirming to IS-13032, IS 8623, BS-5484 with tinned copper bus bar of 200 Amps capacity all as specified and directed.

S & F MCB SPN 32 Amps, 240 volts, B-curve, rupturing capacity 10KA conforming to IEC-60898, Part-I, complete, all as specified & directed.

S & F MCB SP 6 to 32 Amps, 240 volts, B-curve, rupturing capacity 10KA conforming to IEC-60898, Part-I complete, all as specified & directed.

S & F second class hardwood rectangular block open recessed of size 30cm x 25cm x 5 cm depth with 3 mm thick phenolic laminated sheet top cover fixed with suitable steel screws & PVC rawl plug (4 Nos) complete all as directed.

Supply and fixing LED type street DRACO Series , light luminaire 20 Watt 230 V, 50 Hz and including all necessary fitting accessories and LED complete all as specified and directed. Make:- Cat Part No LTESS20WLED of make C & S or equivalent model of make Crompton/ Greaves/Wipro

Supply / Lying, jointing and testing XLPE insulated armoured heavy duty LT under ground cable with aluminium stranded conductor, 1100 volts grade cross sectional area 16 Sqmm 2 core laid in trenches/ ducts/ through pipes, under floors or roads/along poles etc complete all as specified and directed. Note :- Sand cushioning, Cable protection, GI protection pipe, Clamps, Jointing kits and Excavation & Earth work shall be measured & paid for separately.

M&L for dry sand and punning for cushioning to under ground cable complete all as specified and directed. Note : For the purpose of payment only punned thickness shall be measured.

M&L for earthing complete with galvanized steel earth plate electrode 600x 600 x 6.3 mm thick buried directly in ground (earth pit not less than 2.25 M deep below ground level) with top edge of the plate not less than 1.5 M deep below normal ground level and connected to galvanised iron earth wire 4mm dia by means of bolts, nuts, checknuts and washers of GI or steel all as shown in electrical plate No 3 of SSR Part-I 2009 and connection to main switch board / Test point /panel /equipment all as specified or indicated and testing on completion as directed by the Engineer-in-Charge including necessary excavation & earth work in any type of soil, returning, filling in and removal of surplus soil to a distance n exc 50 M, Charcoal and Salt in alternate layer 15cm thick all around the earth plate electrode, MS funnel with wire mesh, GI pipe medium grade 20mm dia for watering and 15 mm dia 3 M long GI pipe light grade for earth wire protection fixed with poles with two clamps, made from MS flat 25mm x 3mm, bolts, nuts and washers, PCC chamber (1:3:6) type C1 40mm thick precast RCC pit cover1:2:4 type B1 shall be provided on CI frame etc complete, all as specified & directed.

M/s M S Sharma and Co.

NAVREET CONSTRUCTION

M/s ASK Enterprises

shiva construction

S.S Enterprises

Radha Enterprises

M/s KUNTAL ASSOCIATES