Supply, Erection, Testing, and commissioning of 220kV & 66kV Equipment’s & materials on Turnkey basis including civil works for 220kV Mahudha AIS Substation.

Name of work: Construction of Control Room Building ,Foundation, Cable Trench, Comp.wall,RCC Road,Yard water

supply,Store Room, Staking Platform, Parking Shed, watchman cabin and yard Metal spreading etc. at 220kV

Dadusar(Mahudha) S/S Ta.Mahudha Dist. Kheda Under Nadiad TR Circle

SCHEDULE-B:- FOR CIVIL WORKS

SR. DESCRIPTION

[A] EXCAVATION, FILLING AND EARTH WORK

1 Excavation for foundation up to 1.5 m Depth including sorting out and

stacking of useful materials and disposing of the excavated stuff up to any

lead including ramming watering up to any lead including backfilling as

directed by EIC

Excavation forHard soil.

foundation 1.5 to 3.0 m Depth including sorting out and

stacking of useful materials and disposing of the excavated stuff up to any

lead including ramming watering up to any lead including backfilling as

directed by EIC

Earth workorinhard soilin all sorts of soil and soft/hard murrum, Soft/Hard

Rock including conveying,breaking boulders in small piece and spreading the

stuff,embankment as and where directed within & any mtrs.from the end of

the cuttung with all required lead and lift,including

filling,watering,consolidating spreaded soil anrd rolling of filled earth work

in 200 mm thick layers at OMC to required density consoladation with

power roller 8 to 10 T.including filling in depressions which occur during the

process,including watering of earthwork etc.as directed by EIC.(Only

cutting measurement will be Paid) including throwing away the extra stuff

4 Filling in plinth/trenches with earth in 200mm, thick layers including

watering, ramming, consolidating etc., complete as directed by EIC. - 1,117.00 CMT

Excavated earth brought from outside. The item rate includes all leads &

5 Earthwork for filling in yard including breaking clods, dressing with all leads

and lift, micro leveling,watering (including watering and consolidation with

to, 10 T rollers). Including all Labour charges & approved quality of

Earth/Murrum brought from out side at any lead.(Earth brought from 1.00 CMT

outside at any lead.)(Note : 25 % of the successive bill amount shall be

retained till lapse of one full scale monsoon and rectifications of

subsistence if any to the design ground level)

6 Filling in plinth with sand in yard including spreading / in under floors

including watering, ramming, consolidating and dressing etc. complete.

[B] CONSTRUCTION

(1) MASONARY WORK

7 Brick masonry using common burnt clay building brick having crushing stregth not

less than 35Kg/Sq.Cm. in foundation and plinth in Cement Mortar (1:6) (1-Cement

: 6-Fine Sand) including racking out joints up to 12mm depth, scaffolding, curing, 303.00 CMT

filling up the gaps between the joints complete as directed by E.I.C. Fly Ash

8 Brick masonry using common burnt clay building brick having crushing stregth not

less than 35Kg/Sq.Cm. in Cement Mortar (1:6) (1-Cement : 6-Fine Sand) including

racking out joints up to 12mm depth, scaffolding, curing, filling up the gaps 629.00 CMT

between the joints complete as directed by E.I.C. but FOR SUPER STRUCTURE :

G.F+F.F+Stair Cabin Fly Ash Bricks.

SR. DESCRIPTION

9 Providing brick masonry in partition wall In C.M.(1:4) including racking out joints

up to 12mm depth, scaffolding, curing, filling up the gaps between the joints

complete as directed by E.I.C. - for partition wall In C.M.(1:4) up to plinth & two

floors G.F+F.F+Stair Cabin. . Fly Ash Bricks.

10 Providing panel wall for dry stone pitching in uncourased rubble masonary

with had stone of approved quality in cement. mortar 1.5 including curing 278.00 CMT

(2) CONCRETE WORK

11 Providing and laying cement concrete 1:4:8(1 Cement : 4 Coarse and :

black crushed stone aggregate 40mm nominal size ) and curing complete- 1,828.00 CMT

Foundation and plinth.

12 Providing and laying cement concrete 1:5:10 (1 Cement : 5 Coarse and :

black crushed stone aggregate 40mm nominal size ) and curing complete- 1,532.00 CMT

Foundation and plinth.

13 Providing and laying ordinary cement concrete M-15 for RCC structure

including finishing smooth with curing etc. comp. excluding the cost of 72.00 CMT

form work & cost of reinforcement

14 Providing & laying control cement concrete M-20 as per mix design

exposed work with curing etc. complete excluding the cost of ply wood

form work & adjustable tubular steel supports / Props. but excluding the

cost of reinforcement.G.F+FF & Staircasse -For Foundation & mass

15 Providing PLY WOOD form work shuttering so as to give a smooth exposed

finish including centering (adjustable tubular steel supports). Shuttering

strutting and propping etc. for any height of propping and centering below 13,599.00 SMT

supporting floor to ceiling , and removal of the same for reinforced

concrete and plain concrete. for Footings , foundations and pedestal.

16 Providing & laying control cement concrete M-20 as per mix design exposed work

with curing etc. complete Including the cost of ply wood form work & adjustable

tubular steel supports / Props. but excluding the cost of reinforcement.G.F+FF &

Staircasse - M-20 for Column

17 Providing & laying control cement concrete M-20 as per mix design exposed work

with curing etc. complete Including the cost of ply wood form work & adjustable

tubular steel supports / Props. but excluding the cost of reinforcement.G.F+FF &

Staircasse - M-20 for Beam

18 Providing & laying control cement concrete M-20 as per mix design exposed work

with curing etc. complete Including the cost of ply wood form work & adjustable

tubular steel supports / Props. but excluding the cost of reinforcement.G.F+FF &

Staircasse - M-20 for Wall

19 Providing & laying control cement concrete M-20 as per mix design exposed work

with curing etc. complete Including the cost of ply wood form work & adjustable

tubular steel supports / Props. but excluding the cost of reinforcement.G.F+FF & 80.00 CMT

Staircasse - M-20 Lintel, Chajja, Slab, Coping and other cantilever portion

20 Providing & laying control cement concrete M-25 as per mix design

exposed work with curing etc. complete EXCLUDING the cost of ply

wood form work & adjustable tubular steel supports / Props. but excluding

the cost of reinforcement.G.F+FF & Staircasse -For Footing base of

col.,foundation & mass concrete.

SR. DESCRIPTION

21 Providing & laying control cement concrete M-25 as per mix design

exposed work with curing etc. complete including the cost of ply wood

form work & adjustable tubular steel supports / Props. but excluding the

cost of reinforcement.G.F+FF & Staircassin

22 M-25 Columns

Providing & laying control cement concrete M-25 as per mix design

exposed work with curing etc. complete including the cost of ply wood

form work & adjustable tubular steel supports / Props. but excluding the

cost of reinforcement.

Providing and laying controlled cement concrete M-25 with curing etc.

complete including the cost of ply wood form work and adjustable

tubular steel supports but excluding the cost of reinforcement for RCC

structures For Control Room Building

Providing For Pardi

& laying control/Wall

cement concrete M-25 as per mix design exposed

work with curing etc. complete including the cost of ply wood form work

& adjustable tubular steel supports / Props. but excluding the cost of

25 M25 Sill,Lintel,Coping,

Providing chajja,

& Fixing in position slab,Staircase,

as per approved drawing TMT steel bar FE

500/500D reinforcement bars confirming to IS 1786 in RCC work including

Cutting, bending, binding with 16 gauge annealed wire, of bars as per IS

requirement If necessary and placing in position etc. completed for RCC

(3) etc. completed

PLASTER WORK as directed by EIC

26 Providing 15mm thick cement plaster single coat on masonary / bela /

concrete wall / ceiling for plastering up to any floor level finished even and 7,495.00 SMT

smooth in cement mortar 1:3 (1 Cement : 3 sand) finished with floating

coat of neat cement slurry.

27 Providing 20mm thick sand face cement plaster on wall up to height

meters above ground level consisting of 12mm thick backing coat of C.M. 1:3 1,468.00 SMT

(1 cement : 3 sand) and 8mm thick finishing coat of C.M. 1:1 (1 cement :

sand) etc. complete.

28 Providing and spreading Cement slurry of mix 1:6 (1- Cement : 6 Sand)

provided over the cement concrete layer for metal work with cement 20,423.00 SMT

content not less than 150 Kg/ 100 Smt including of all materials, labour,

spreading etc completed as directed by EIC.

29 Providing cement vata (10cmx10cm size) quarter round in cement mortar 1:1

including neat cement finishing watering etc. complete.

30 providing and applying two coats of putty & two coats of primer of

approved brand and manufacture on new wall surface to give an even shade 2,490.00 SMT

including thoroughly brushing the surface free from mortar dropping and

other foreign matter and sand papered smooth.

31 Providing and applying (three coats) with plastic emulsion paint of approved brand

and manufacture like Asain paints Apocolite premium emulsion, Dulex valvet touch

or its equivalent on undecorated wall surface to give an even shade including

throughly brushing the surface free from mortar droppings and other foreign 2,490.00 SMT

matter and sand papered smooth. Minimum 03 year warranty certificate to be

taken from paint brand. (Note: Before making final payment to agency warranty

certificate from the original manufacture for specific project on the name of

agency must be collected.)

SR. DESCRIPTION

32 Providing and Applying 1(one) Coat of SMARTCARE PRIMERO and 2(two) coats

of APOCOLITE APEX plastic emulsion paint or its equivalent Wall painting of

approved brand and manufacture And GETCO Approved Shade on undercoated wall

surface to give an even shade. The work included thoroughly brushing/cleaning

the surface free from mortar droppings and other foreign matter and also 6,448.00 SMT

including preparing the surface even and smooth by sand paper or any other

approved method. Minimum 05 year warranty certificate to be taken from paint

brand. (Note: Before making final payment to agency warranty certificate from

the original manufacture for specific project on the name of agency must be

33 Providing & applying 3 coats of ACID/ALKALI resisting paint of approved

shade & make to wall, ceiling including filling putty smoothing the surfaces 127.00 SMT

scaffolding etc. complete as directed by E.I.C.

34 Providing & fixing approved quality approved quality 36'' X 36'' vitrified

tiles(10 mm thick) of best quality matt/glossy finish of

Johnson/Kajaria/Nittco or its equivalent make of required size for flooring,

skirting etc. including fixing the same in cement mortar (1:3) setting with 71.00 SMT

ready made tile adhesive as recommended by manufacturer's including

fillings of joints mixed with pigmented cement slurry of matching shade

etc. complete for light shade

35 Providing & fixing approved quality approved quality 24'' X 24'' vitrified

tiles(10 mm thick) of best quality matt/glossy finish of

Johnson/Kajaria/Nittco or its equivalent make of required size for flooring,

skirting etc. including fixing the same in cement mortar (1:3) setting with 5.00 SMT

ready made tile adhesive as recommended by manufacturer's including

fillings of joints mixed with pigmented cement slurry of matching shade

etc. complete for light shade

36 Providing and laying color glazed tiles-JOHNSON/KAJARIA/NITTCO or

its equivalent make of the size 1200mm x 600 mm x 8mm in flooring &

Dedo laid on bed of 12mm thick cement mortar 1:3 (1 cement : 3 course

sand) & fixing the same in cement & providing 12mm thick back coating of

cement plaster in CM 1:3 for base, filling the joints with white/color

cement neatly finishing the joints curing etc. complete.

37 Providing and Applying spacer of 4mm and not less than 4mm depth of epoxy

grooving grouting of lavicrete , Roff or its equivalent as directed by Engineer in

charge including cost of fixing materials, labour, tools, plants, equiptnent including

all lead & lift comp.

38 Providing and laying approved quality polished Kotah stone slab(25mm th.&

600 X 600 MM SIZE) flooring including using 35x25mm approved

quality machine cut, marble strip over 20mm (average) thick base of

cement mortar 1:6 (1 cement : 6 course sand )or L.M. 1:1.5 laid over and

jointed with grey cement slurry including rubbing and mirror polishing using 751.00 SMT

polishing machine with grinding six emery's of different no. including using

special chemical powder for polishing including white cement coating two

times during polishing for filling up minute holes or cracks in joints etc.

SR. DESCRIPTION

39 Providing and laying Granite stone flooring or dedo over 20mm base cement

mortar of 1:6 jointed with white/grey cement slurry including Moulding 145.00 SMT

edges, rubbing and polishing complete. (A) Granite slab 18mm Thick

40 Labour charges for making molding edge to marble / Kotah including all tools

tackles, materials and labour etc. complete as directed.

41 Providing & fixing approved quality approved quality ceramic vitrified

tiles (6mm thick) of best quality matt/glossy finish of

Johnson/Kajaria/Nittco or its equivalent make of required size for flooring,

skirting etc. including fixing the same in cement mortar (1:2), on 10mm thick 133.00 SMT

cement plaster inclusive setting with ready made tile adhesive as

recommended by manufacturer's including fillings of joints mixed with

pigmented cement slurry of matching shade etc. complete - For battery

(6) DOORS AND WINDOWS

42 Providing and fixing fully glazed / partly glazed double leaf 20 micron thick

colour anodized aluminium door with following listed extruded section

manufactured by Jindal Aluminium Ltd. & other accessories, the Alluminium

sections are of HE9WP Group:

1) with door outer frame section of 63.5 x 38.1 x 3.18 mm thick weighing

1.777 kg/rmt (J4605)

2) Door shutter vertical style (meeting style) of 53.7 x 44.45 x 2.30mm

thickness (J4537) weighing 1.238 Kg/m

3) Hinge side 53.7 x 44.45 x 2.30mm thickness (J4540) weighing

4) Bottom rail of size 150 x 44.45 x 2.40mm thickness (J4538) weighing

5) Lock rail of size 150 x 44.45 x 2.40mm thickness (J4538) weighing

6) Top rail of size 47.62 x 44.45 x 3.18mm thickness(J4506) weighing

7) Ventilator middle member (if required) 49.91 x 44.45 x 3.00mm

thickness (J4621) weighing 1.495 Kg/ Rmt

8) Aluminium handle 127.00 x 37 x 3.65mm thickness (J4483) weighing

9) Tower bolt 250mm long (J4954)

10) Aluminium bending mortice lock (J4420)

43 Providing and fixing window having extruded aluminium 20 micron thick

colour anodized section frame main outer size 63.50x38.10x19.5mm (of

Jindal Section no:4605, @ wt 1.094Kg/Rmt), horizontal two track member

size 61.85mm x 31.75mm x 1.20mm(of Jindal Section mo: 8687 @ wt of

0.695 Kg/mt), vertical member of size 61.85mm x 31.75mm x1.30mm(of

Jindal section no: 8758 @ wt of 0.659 Kg /mt) with Sliding Shutters of

horizontal member Size 40mm x 18mm x 1.29mm(of Jindal section no:

@ wt of 0.456Kf/mt), vertical member of size 40mm x 18mm x 1.29mm (of

Jindal Sectio: 8947 @ wt 0.457 Kg/mt, section 8948 @ 0.457kG/mt) with

mm thick transparent bronze colour/white tinted float glass with aluminium

SR. DESCRIPTION

44 Providing and fixing standard extuded of alluminium 20 micron thick colour

anodized section of size 63.0X38.10X1.20mm(of Jindal section No.2434

@Wt. 0.643Kg/Rmt ) with anodized alluminium frame frame for ventilation

with 5mm thick white/brown glass fixed horizontal louvers in aluminum

Providingas and

Fixing drawings

20 micron colour Anodised standard extruded of

alluminium section of size 63.50mm x 38.10mm x 1.95mm (jindal section:

4605 @ wt 1.094 Kg/Rmt) with colour anodized alluminium frame with

5mm thick transparent bronze colour tinted glass as details etc complete

46 for Fix window.

Provoding and fixing flush door shutters of 35 mm thick., solid core

construction with frame of first class hardwood with cross board and

face veneer laminate or plywood face panels (moisture-resistant grade

BWR or BWP) ,including anodised alluminium butt hinges with necessary 12.00 SMT

screws. (B) Non-decorative type and block board core anodised alluminium

butt hinges in flush door shutters, including feather touch press button

cylindrical lock of SS finish as per EIC

47 Providing and fixing eco-friendly light weight calcium silicate false ceiling tiles

having Tegular edge & 15 mm Thick Densified edges on the Tile Periphery for

Extra Strength The Light weight calcium silicate ceiling tiles shall have , light

reflection 85% non-combustible as per B.S. 476 part IV, 100% humidity resistance

and also having thermal conductivity0.043° w/m KC.for the best thermal

Insulation . The Light weight calcium Silicate tile shall be of approved texture Fine

fissured/ Spintone/Cosmos having NRC value of 0.5 & Globe having NRC value of

0.75 NRC or equivalent of size 595 X 595 mm to be laid on true horizontal level

suspended inter locking metal grid of hot dipped galvanized steel sections

(galvanizing @120 grams per sqm including both side) consisting of main ‘T’ runner

suitably spaced at joints to get required length and size of 24X38mm made from

0.30 mm thick (minimum) sheet, 1200mm centre to centre, and cross ‘T’ of size 333.00 SMT

24X28mm made out of 0.33mm (Minimum) sheet spaced 1200mm along spaced

between main ‘T’ at 600mm centre to centre to form agrid of 1200X600mm and

secondary cross ’T’ of length 600mm and size 24x28mm made of 0.30 mm thick

(Minimum) sheet to be interlocked at middle of the 1200X600mm panel to form

grid of size 600X600mm resting on periphery walls/partitions on a perimeter wall

angle pre-coated steel of size (24X24X3000mm made of 0.40mm thick (minimum)

sheet with the help of rawl plugs at 450mm centre to centre with 25mm long dry

wall screws @ 230mm interval and laying 15mm thick Densified edges light weight

calcium silicate ceiling tiles of approved texture (Fine Fissured/Cosmos/Spintone)

in the grid including, cutting /making

(7) FABRICATION ITEMS

48 Providing & fixing steel rolling shutter with Gear box as per IS : 6248 -

1979 having 18 Gauge of approved make & made 80 mm wide M. S. Laths

interlock together through their entire length and jointed together at the

end by end locks mounted on specially designed pipe shaft with brackert

plates guide channel and arrangement for inside and outside locking with 14.00 SMT

push pull operation complete including the cost of hood cover and spring

etc., complete as directed. (THE MEASUREMENT SHALL BE PAID FOR

WALL OPENING PLUS DRUM ONLY) (A) Shutters having width below

SR. DESCRIPTION

49 Providing & fixing MS Grill of approved quality & design weighing 25 to

kg/smt. as per drawing & as directed with including welding or bolted fixtures

and fastening. M.S. Flat hold fasts etc. with 3 coats of oil painting of approved 4,746.00 KG

shade & tint with one coat of red oxide primer etc. complete as directed by EIC.

50 Providing and fabricating and erecting GI work Welded angle posts, racks

& trays for cable trench using structural steel angels and flats, sheets etc.

of approved steel manufacturer as per drawing & design including cutting,

welding & fixing hold fast in wall with C.C. & with hot deep galvanized as

per IS-2633/72 and 209 of 1966 or latest amendmentetc& make etc.

completed as directed by EIC.(All materials required for the work to be

51 Providing supplying fabricating and erecting chain link fencing panel of

size 2400x2000mm made from 75x75mm & 10 gauge GI chain link &

50x50x6mm angle including fixing and chain link in angle frame by means of

40x3 mm GI flat welded to angle frame. Drilling of holes in angle frame and

flat, fixing the same with angle post in line, level and plumb by means of 10 1,810.00 KG

mm dia bolts and nuts in frame and flat with hot deep galvanizing as per IS-

2633/72 & 209 of 1966 or latest amendment, etc complete as per drawing

as directed by EIC. (Note:All this materials like G.I. flat, chain link

fencing, GI angles, bolts, nuts will have to be supplied by the

52 Supplying & fixing 450mm dia hot dip galvanising cross spiral type razor

edge concertina coil having 80 circles, 200 clips with optimum openable

stretch of 6 m length using a central core wire high carbon spring steel (

High tensile wire) made up of 2.6 mm. dia. as per IS : 4454, Part - 1, Grade -

II having minimum galvanising of 230-250 gms per mm2.around which a edge 994.00 RMT

of razor sharp barbs strip of .5 mm. thick & 19 mm. width confirming to IS :

513 DD quality having minimum galvanizing coating of 12 microns with series

of barbs punched along the length at regular interval supported / tied with

four rows of barbed runner wires to newly proposed MS angle brackets

53 with U nails &cutting,

Fabrication, clips etc. threading

complete asincluding

per manufacturers specificationincluding

hot dip galvanizing and

supply of MS rods of appropriate size for foundation bolts with two nos. of 29,271.00 Kg

nuts for each foundation bolts as per drawings / instructions of EIC

54 Setting of Transformer rail & its foundation bolts in line and level

before concreting of foundation and making arrangement of fixing Rail in 3.00 PAIR

such a way as it remains in position during concrete etc. comp. As directed

55 Setting of template & foundation bolts in line and level before concreting

of foundation and making arrangement of fixing template in such a way as it

remains in position during concrete etc. comp. as directed by EIC.The rate

includes supplying & fabricating of templetes as per templete drawing

including all meterials ,toolstackles, & labour requriex for that .No extra

payment for prparation of templates will ne made, The templates prepared

56 Providing & fixing M.S. ladder 450mm wide or 50x6mm M.S. flat and 16mm dia

M.S. Bars welded as step at 300mm C/C and fixing the ladder & one coat of red 24.00 RMT

oxide & 3 coats of oil painting etc. complete as directed by E.I.C.

SR. DESCRIPTION

57 Providing and fixing M.S. Sign Board made out of 2 mm thick

Aluminium/ACP. sheet of size 450x450 MM with Frame of 50x50x5 MM

and post height of 2.5 M of size 75x75x6 mm with 2 coat of Oil paints &

painting letters on it as per design given by EIC. For Fixing Sign board to 2.00 NO

be fixed in 1:3:6 concrete with necessary excavation. The details of

symbols or description / numerals for board shall be as per instruction of

EIC. The rate is including of supplying, fixing, transportation,

58 Providing & fixing sliding gate of 40 mm dia mild steel pipe B class all round

and 20 mm dia Mild steel pipe at 200 mm C/C and 12mm Mild steel square

bars at 200 mm C/C alternatively (i.e.One between two pipes) vertically

welded to 40 mm dia pipe frame as per drawing and design with necessary

brackets,hold fasts,locking arrangement on top & aldrop on both the side 39.00 SMT

including base rail for sliding the gate having ball bearing rollers & guide

tracks of 50x6mm M.S. flat with hold fast, fabrication of side supports

including fixing GETCO letter on front side etc.comp.With three coats of

approved oil painting & one coat of red oxide primer as directed by EIC

(8) cost does not include the cost of reinforcement,column

59 Providing & fixing pre-cast Rubber Dye interlocking CONCRETE BLOCK

60MM thick with grade of concrete M 300 Pnumatic compressed by

mechanically pressed and as per approved design including 75 MM Sand

LAYER for levelling and filling the joint with sand in proper line and level

Providing & placing 50mm thick & 300mm wide prestressed concrete cover

(for clear span of up to 1.2 meter in proportion (1:1:5:3) or M-20 necessary

reinforcement or 4mm dia HT steel wire-4 Nos. bars and 4mm dia.

distribution bars at 150 mm C/C as per drawing & design including providing 1,124.00 SMT

necessary& vibrating with vibrators. Finishing all the surfaces, curing by

placing in water pond for ten days etc. complete as directed by E.I.C. ( The

rate includes cost of all material required, labour charges, transportation,

61 Providing and fixing pre-cast concrete kerb stone of gray cement

based concrete block 60cm length,45 cm height and 10 cm thick of M200

grade concret as per approved design and including excavation for fixing in

proper line and level,filling the joint with C:M 1:3 1cement:3fine sand) etc

62 complete. as directed

Providing and by EIC concrete kerb stone of gray cement based

fixing pre-cast

concrete block 30cm length,30cm height and 15cm thick of M200 grade

concret as per approved design and including excavation for fixing in proper

line and level,filling the joint with C:M 1:3 (1cement:3fine sand) etc

Providing and laying of Geotextile, 250 gsm non-woven, as per the

manufacturer recommendation and specification below gabions, tied

securely with gabion by using lacing wire of fasteners etc. completed as

directed by EIC. The item includes the dewatering and whatever required

completing the job without any extra payment as per manufactures.

SR. DESCRIPTION

64 Providing & laying water proofing treatment on terrace including applying

neat cement slurry 2.75 kg./sq.mt. on cement admixed with water proofing

component after cleaning the surface, Laying cement concrete with brick

bat 75mm to 100mm thick with 50% of C.M. 1:5 admixed with water

proofing component over 20mm thick layer of C.M. 1:5 to required slope

including ramming at junction of wall and slab, after two days of proper

curing applying a second coat of cement slurry, finished the surface with 879.00 SMT

20mm thick C.M. 1:4 china mosaic flooring and finally finishing flooding

75mm deep with water on terrace for a period of two week. The

contractor shall submit performance guarantee of the waterproofing item

at the rate of 20% of cost of item of work order in the form ofBG/DD of

Schedule Bank / Nationalised Bank in favour of GETCO (A/c Agency) for a

period of 5 years from actual date of completion of work stamp paper of

65 appropriate value in approved

Providing & applying format

anti termite of GETCO.

treatment, as per IS 6313 (Part.II & II

2001) for building works in pre construction & post const. stages, using

chemicals conforming to relevant IS in water emulsion and effective when

applied uniformly over the area to be treated. The chemical to be used is

chlorophriphos 20% EC or its equivalent. The treatment is to be carried

out as per the procedure mentioned below and treated plinth surface area

is to be taken for measurement. (with performance guarantee for

years)a)For pre construction treatment: For plinth filling & periphery holes

in side plinth to be drilled 300MM C/C each having depth 1.5M and for

inside plinth the hole are to be treated with diluted chemical solution,

lit. per hole, in the ratio of 1:20. For periphery i.e. out side plinth the ditch

is to be treated with diluted solution 2.25 litre per rmt. In the ratio 1:20.

The entire surface area is to be treated with diluted solution of dose

litres per smt. over and above as a plinth surface treatment. The

contractor shall submit performance guarantee of the waterproofing item

at the rate of 20% of cost of item of work order in the form of BG/DD of

66 Providing & fixing approved quality 300x300mm size marble year plate

with black border all round & letters including fixing the same in cement 2.00 NO

mortar etc. comp. As directed by EIC.

67 Providing plantation & development of plants /trees/flowers,ornamental

plants, & garden shrubs,small trees of plants of selected & approval name

quality,size & growth in good condition.The work includes cost of

plants,material,digging pit in the soil of size 0.6x0.6x0.6 mtr soil for 100.00 NO

planting trees. mixing manure & refiiling pit with good earth ,watering as &

where required. Providing pesticides/fertilizer for

maintenance,replacement & replacing of dead plant during

maintanence.cleaning,removing,labour,tools & tackles transportation,loading

SR. DESCRIPTION

68 Providing and fixing Sign Board made out of 2 mm Aluminium/ ACP sheet

of size 180 x 120 cms as per design given by EIC, pre treated with

phosphating process and acid etching, coated with one coat of epoxy primer

and two coats of best quality epoxy paint, reflectorized with retro

reflective sheeting as per latest M.O.S.T specifications. Letters and 1.00 NO

numerals should be as per IRC 30-1968, 2 nos 2.7 m long 50x50x5 mm stand

angle post and frame may be erected from 25x25x3 mm sq. hollow section

as required and painted with best quality epoxy coatings. The details of

symbols or description / numerals for board shall be as per instruction of

69 EIC. The rate

Providing is including

& fixing of supplying,

6mm thick fixing, transportation,

Lexan Polycarbonate multi wall roofing sheet

fixed with hilti screw and rubber silicon sealer and alluminium strip of size 72.00 SMT

50x3 mm etc. complete as directed by engineer in charge.

70 Providing and fixing Acrylic name plates of require size including painting

letters as directed and fixing as directed by EIC.

[C] WATER SUPPLY AND DRAINAGE & MISC.

71 Providing laying and joining in true line and level UPVC pipe (SCH-40)

including fittings of PRINCE/ SUPRIME/ ASTRAL/ FINOLEX or equivelent

make or as approved by EIC.Pipe shall be fixed on the wall with the help of

clamp at every 2000mm c/c or shall be concilled or necessary excavation in 28.00 RMT

trenches as directed including necessary fittings including testing of pipe

and joints and fixing the same with adhesive solvant,including cost of all

materials and necessary refilling the trenches,dressing etc complete. For

72 Providing laying and joining in true line and level UPVC pipe (SCH-40)

including fittings of PRINCE/ SUPRIME/ ASTRAL/ FINOLEX or equivelent

make or as approved by EIC.Pipe shall be fixed on the wall with the help of

clamp at every 2000mm c/c or shall be concilled or necessary excavation in 245.00 RMT

trenches as directed including necessary fittings including testing of pipe

and joints and fixing the same with adhesive solvant,including cost of all

materials and necessary refilling the trenches,dressing etc complete. For

73 Providing laying and joining in true line and level UPVC pipe (SCH-40)

including fittings of PRINCE/ SUPRIME/ ASTRAL/ FINOLEX or equivelent

make or as approved by EIC.Pipe shall be fixed on the wall with the help of

clamp at every 2000mm c/c or shall be concilled or necessary excavation in 50.00 RMT

trenches as directed including necessary fittings including testing of pipe

and joints and fixing the same with adhesive solvant,including cost of all

materials and necessary refilling the trenches,dressing etc complete. For

74 Providing & Fixing FINOLEX brand or equivalent rigid PVC. Pipe for rain

water including necessary fittings like bends shoe, cowl etc.& fixing the

pipes to the wall in plumb by means of GI.Clamps of 18 gauge sheet with

to1.5 meter distance,filling the joints with approved solution complete as

& EIC. [B]FINOLEX

Fixing 50mm diabrand

pipe 6kg/smtrigid PVC. Pipe for rain

water including necessary fittings like bends shoe, cowl etc.& fixing the

pipes to the wall in plumb by means of GI.Clamps of 18 gauge sheet with

to1.5 meter distance,filling the joints with approved solution complete as

directed by EIC. [B] 75mm dia PVC pipe 6kg/smt

SR. DESCRIPTION

76 Providing & fixing to all ceiling and floor 6kg/SqCm working pressure

polythine pipes of the following out side diametre, low density,complete

with special flange compression type fittings,wall cleaps,etc including 52.00 RMT

necessary fittings like bend,shoes,Y,Tee,etc including testing of pipes and

jointed with adhesive solvant cement including cost of all materials making

77 Providing & fixing to all ceiling and floor 6KgF/SqCm working pressure

polythine pipes of the following out side diametre, low density,complete

with special flange compression type fittings,wall cleaps,etc including 187.00 RMT

necessary fittings like bend,shoes,Y,Tee,etc including testing of pipes and

jointed with adhesive solvant cement including cost of all materials making

78 Providing & Fixing FINOLEX brand or equivalent rigid 4 KG/CM2 PVC.

DRAINAGE Pipe for rain water including necessary fittings like bends shoe,

cowl etc.& fixing the pipes to the wall in plumb by means of GI.Clamps of

gauge sheet with 1 to1.5 meter distance,filling the joints with approved

solution complete as directed by EIC. [B] 165mm dia O.D PVC pipe

79 Supplying and fixing reinforced concrete heavy duty non-pressure pipes

with collars for culverts including setting the pipe in C.M. 1.2 watering and 38.00 RMT

laying [to level or slopes] of class NP 2 of the [A] 150mm diameter.

80 Supplying and fixing reinforced concrete heavy duty non-pressure pipes

with collars for culverts including setting the pipe in C.M. 1.2 watering and 12.00 RMT

laying [to level or slopes] of class NP 2 of the [A] 300mm diameter.

81 Supplying and fixing reinforced concrete heavy duty non-pressure pipes

with collars for culverts including setting the pipe in C.M. 1.2 watering and 54.00 RMT

laying [to level or slopes] of class NP3 of the [A] 600mm diameter.

82 Providing and fixing PVC SWR Nahani Trap IS 14735 for drain with jali

of the following nominal diameter of self cleansing design with C.I.scread 9.00 NO

down or hinged grating including the cost of cutting and making good the

walls. For 100MM DIA

83 Providing and fixing approved quality S.W. gully trap with C.I. Grating, brick

masonry chamber and water tight C.I. cover with frame of 300 mm x 300 6.00 NO

mm size (inside) with standard weight. 150 mm x 100mm size P or R type.

84 Providing & Fixing light type CI Manhole covers with water tight CI Frame

& fixing the same in concrete etc.complete as directed by EIC [A] 5.00 NO

600x600 mm size

85 Providing and fixing gun metal check or nonreturn fullway wheel valve

86 Providing and fixing gun metal check or nonreturn fullway wheel valve A

87 Providing and fixing approved quality bib Cock with wall Flange of Cera

/Jaguar/Hindware make etc complete as directed by Engineer In Charge.- 9.00 NO

88 Providing and fixing a set of 6 No of stainless steel coat racks of approved

quality fixed on 20 mm thick Teak wood batten at 150 mm c/c including 3 4.00 NO

coats of oil painting etc complete (450 mm long).

89 Providing and fixing C.P. brass towel rail complete with C.P. Brass brackets

fixed to wooden plugs with C.P. Brass screws, (B) 600mm x 20 mm size 3.00 NO

SR. DESCRIPTION

90 Providing and fixing 600 mm. X 450 mm. Bevelled edge mirror of superior

glass mounted on 6 mm. Thick A.C, sheet or plywood sheet and fixed to 3.00 NO

wooden plugs with C.P. brass screws and washers

91 Drilling of borewell of 325mm dia by machine in all kind of soil ,sand

,murrum, soft rock hard rock and hard murrum etc up to required depth 180.00 RMT

complete truly vertical with equipments & labours etc complete as directed

92 Developing, Clearing & giving yield test for the bore well by required size

of compressor & pump running for 12 hours or till no sand comes off with

the pumped water with necessary pipes lowering & removing pipes in well

etc., with all equipments required to carry out the test etc., complete as

Providing by E.I.C.logging test with electro logging equipments and required

machinery for ascertaining / logging aquifers encountered in bore well and

arranging and defining the water availability test giving test report of Geo- 1.00 NO

hydrologist from Govt. approved laboratory, recommending water bearing

zones, TDS of water, etc complete as directed.(Approved Rate of 66 kv s/s

94 Providing & fixing approved quality top cap for 200mm dia. Pipe clamps,

socket & other accessories required for completing the job as directed by 1.00 NO

95 Providing fixing and lowering 200 mm dia OD having wall thickness 8.8 to

9.8 mm PVC CM casing pipe / strainer pipe with slotted holes of IS :12818

AROMA,ASTRAL,ASHIRVAD,FINOLEX make or it`s equivalent including

necessary threading couplings connections and Gravel packing etc.

Providing &aslaying

EIC.approved ISI quality UPVC Column pipe of

feet length each of Ashirvad,Astral,Finolex,Prince or its equivalent 190.00 RMT

including making required threading, coupling, closing clamping,fixing the

same etc. Completed as directed by E.I.C.

97 Supplying and lowering the approved ISI submersible pump for 7.5HP/8

stage in bore well etc. comp. as directed including ISI approved MEI type

oil immersed auto transformer starter commissioning and testing to

required delivery head and preferably with 5 star energy rating (all other

Providing & will be paid

Fixing separately.)

readymade PVC. water tight storage tank made from

linear low density polyethylene & low density polyethylene LDPF product

confirming to IS:10146-1982 with cover including providing & fixing ne

mm dia, float valve ball-cock, one 20 mm.dia GI over flow pipe of length

upto 0.30Mt. Including making all connection for inlet/outlet etc.complete

as directed EIC.1000 Liters Capacity.

99 Providing & fixing approved quality single phase monoblock / self priming

pump of ISI brand (2H.P)with all GI fitting for inlet & outlet connection 1.00 NO

including providing G.M.Wheel valve required electric fitting / switch board

100 Providing and fixing approved quality control panel board metal box I.S.I.

with a main fuse connection ampere meter, volt meter 30 Amp. 1 phase

switch single phase preventor cum water level guard and male and female 1.00 NO

type socket 1 phase indicator lamps and toggle switch etc. including all

wiring/earthing completed as directed by E.I.C.

SR. DESCRIPTION

101 Providing & joining approved quality flat Copper cables sufficient for

HP pump set etc complete -4mm flat cable.

102 Providing and fixing approved quality table top Wash basin with Bib cock, Angle

cock with wall flange and incl. fixing wash basin complete as directed by Engineer

In Charge. waste pipe to be concealed with approved quality SS bottle trap.(A) 4.00 NO

Wash basin and other accessories of make Cera /Jaguar/Hindware/Simpolo

Snow white of size 400mm x 400 mm x 150mm

103 Providing and Fixing approved quality steel sink 450x400mm size with wall flange

and incl. fixing wash basin complete as directed by Engineer In Charge. waste pipe

to be concealed with approved quality SS bottle trap including all neccesary fiting

as per instruction of EIC of make Cera /Jaguar/Hindware/Simpolo(Matt finish)

104 Providing and fixing Floor Mounted Europian Water closet of approved

quality make with All in one ( Cistern, Flush fittings, trap and seat cover

set) , Health Faucet, etc. complete as directed by Engineer In Charge. (A) 3.00 NO

Water closet & other accessories of Cera /Jaguar/Hindware/Simpolo snow

white of size 530mm x 385mm x 390mm

105 Providing & fixing Urinal of approved quality ) and including Self closing angle

cock pressmatic with wall flange and connecting pipe , connecting the Urinal with

conceled waste pipe, trap etc. complete as directed by Engineer In Charge. Waste 2.00 NO

water pipe connection shall be concealed only. Urinal of Cera

/Jaguar/Hindware/Simpolo Snow White of size 265mm X 335mm X 695mm

106 Providing B.B. Masonry inspection chamber (MANHOLE) of 600mm x

mm size including light type approved C.I. Cover with frame, necessary

excavation, bottom concreting ofP.C.C. (1:4:8) 150mm thick/225mm, thick

B.B. Masonry in C.M. (1:6) 12mm thick cement plaster in C.M. (1:3) inside & 8.00 NO

to all exposed faces up to 300mm below ground level, curing etc. including

disposal of surplus excavated earth up to radius of 500mt. including 3 coats

of white or colour wash to all exposed finished surface etc. complete as

directed by EIC. (B.B. Masonry up to 1000mm depth))

107 Providing 2500mm internal diameter & 4.0 Mt. deep soak pit including

excavation in all types of soil & soft rock & P.C.C. (1:4:8) bedding 300mm.

thick below masonry and 450mm. thick B.B. Masonry in C.M.(1:6) up to

600mm. height, 350mm. thick for further 600mm. and 230mm.thick for

remaining height honey combed, plastering in C.M.(1:3) outside up to 1.5 Mt.

height and 100mm. thick R.C.C. Slab with 600X600mm. C.I.HEAVY cover

with frame, with necessary reinforcement as per design & C.I. Vent pipe

1800mm long with B.B. Masonry pillar 350X350X450 plastered all around

filling 40 to 50mm. size brick bats up to 1.5 Mt. depth, including 16mm. dia.

M.S.`U' stages steps refilling including disposal of the surplus excavated

earth up to the lead of 300mt radius including 3 coats of white or colours

wash to all exposed finished surface etc. complete as directed by E.I.C.

[D] ROAD WORK and Metal spreading works

SR. DESCRIPTION

108 Providing and Laying Controlled cement concrete M20 for trimix RCC road

excluding the cost of reinforcement & including of using 125micron

polythene sheet at base of concrete, using approved quality polyester

fiber (12mm) during mixing of cement concrete(@125gm per bag) and or as

per manufacturer's specification including preparing the sub base with

form work of M.S Chanel of required size to maintain level and slope of

concrete with using surface vibrator, finishing the surface with power

floater and trove, light brooming on the surface with providing construction

joints of size 10 mm wide 25mm deep in transverse direction @4.5m C/C

with sealing the same with approved quality bitumen sealent and providing

expansion joints of size 25 mm width and upto through depth of concrete

using 25mm thick Dura Board HD-100 of approved quality and sealing the

same with approved quality bitumen sealent at 40meter C/C and

longitudinally for 6m wide road using concrete cutter machine with

109 necessaryand

Providing equipments, labors tools

laying spreading and tackles etc complete

compacting machine as dircted

crushed by EIC.

stone aggregate (53 mm to 22.4 mm at 30 % , crushed stone aggregate

mm to 2.36 mm at 40% and below 2.36 mm at 30%), 150mm thick Wet Mix

Macadam in two layers the material with water to OMC in mechanically mix 815.00 CMT

(pug mill) carriage of mix material by tipper to site laying, spreading and

compacting in sub base, base course on well prepared under base of

compacting with roller to achieve the desired density etc completed as

directed by Engineer in charge (Mechanically laid) WMM

110 Providing and laying 150 mm thick Granular sub-base in two layers by

providing coarse graded material Grading- I using B.T.M.C. (Black Trap

Machine Crushed) metal 53 mm to 26.5 mm at 35 % , crushed stone

aggregate 26.5 mm to 4.75 mm at 45% and below 2.36 mm at 20% ,having 815.00 CMT

C.B.R. not less than 30%, as per table 402 of MORTH gradation including

leveling the material at site of work ,mixing and spreading into grade and

camber , watering and consolidation at OMC with roller including cost of

111 Supplying and fixing cat eye (Stimsonite) made out from Acrilobeautile

sterine injuction high compressed molding with reflectormade of MMC 206.00 Nos

(prismatic type of size 12cm x 6cm x 2.5cm)provided with bituminous

adhesive 100g. with each unit forfixing. (High Intensity grade)

112 Road marking with hot applied thermoplastic paints withreflectorising

glass beads on bitumin surface providing and layinga hot applied

thermoplastic compound 2.5 mm thick includingreflectorising glass beads @

250gms per sqm area, thickness of2.5mm is excluding of surface applied

glass beds as per IRC:35-2015. The finished surface to be level, uniform

and free fromstreaks and holes. zebra patta /bump patta lane/center line/ 206.00 Smt

edgeline/cut patta. The white color marking should provide

liminancecoefficinet on cemend road shalll be min 130 mcd/m2/lux

andAsphalt road shall be min 100 mcd/m2/lux during the service lifeduring

the day time. The marking should meet the performancecriteria for night

time reflectivity, wet reflectivity and skidresistance as mentioned in the

SR. DESCRIPTION

113 Providing and laying 50-75mm thick Grouting with Non Shrink Grouting

material of CONBEXTRA- GP2 ,POLYGROUT-NS or equivalent, having

the minimum compressive strength of 45 N/Sqmm mixing as per

manufacturer's specification including necessary shuttering, tool tackles

114 labour etc.&completed

Supplying stacking as40mm

Engineer In road

black crushed metal

including transportation filling the box etc. complete. (box measurement 1,736.00 CMT

shall be paid with 15% void deduction)- For yard work.

115 L/C for spreading 40 mm size metal in 100mm thick layers for road

with reqd grade & camber & watering . filling depression which occur during 1,736.00 CMT

process etc. comp.as directed by E.I.C.

116 Supplying of screened cleaned pea (rounded) gravel of following sizes)(ii)

12mm nominal size.

117 Supplying and spreading 'Round up" (Glyphosphate 41% SL) of approved

IS standard make or equivalent weedicide for weed control in proportion of

100ml weedicide and 250gram ammonium sulphate mixing with sticking

agent mixed with 10Ltr of clean water and spraying as per manufacturers

Note : The andConcrete

Controlled as directed by Engineer

(M15, In Charge.

M20,M25,etc. ) work shall be carried out through AJAX Fiori only.