REPAIR AND MAINTENANCE OF STEEL, WOODEN AND T P FURNITURE ITEMS TO POLISHING, PAINTING, REPAIR AND RE-CANNING AT PORBANDAR, OKHA, VADINAR AND VERAVAL AREA UNDER GE (I) CG PORBANDAR

Amount

SCHEDULE 'A'

SCHEDULE A PART-I STEEL FURNITURE Almirah Large Steel Removing the unserviceable lock of Almirah steel large and tighting of loose parts of the locking device and supply and fix new lock 7 lever with duplicate keys all as specified and shown on drawing (Make of Lock- Harison). Drg No : FD/E6/MAP/18, FD-104(M), 109(M), 1033 & 1031

Removing the existing unserviceable handle of Almirah steel large , supply and fix 100 mm size new chromium plated steel handle of approved quality all as specified and shown on drawing. Drg No : FD/E6/MAP/18, FD-104(M), 109(M), 1033 & 1031

Removing the existing unserviceable leg of Almirah steel large, supply and fix new leg made of 1mm thick CRCA sheet to match the existing duly welded/riveted and painted with one coat of synthetic emamel paint of olive green shade of approved quality to match with existing over a coat of primer all as specified and as directed. Drg No : FD/E6/MAP/18, FD-104(M), 109(M), 1033 & 1031

Removing the existing unserviceable 3 way locking device and suppply of Almirah steel large and fix new locking device with necessary fittings and painted with one coat of synthetic enamel paint of olive green shade of approved quality to match with exiting all as specified and as directed. Drg No : FD/E6/MAP/18, FD-104(M), 109(M), 1033 & 1031

Removing the existing unservicable/Rusted door shutters (both), supply and fix new door shutters made of 1mm thick CRCA sheet including chromium plated steel handle 100mm size -01 No, 3 way locking device with 7 lever brass lock with duplicate keys- 01 No, key hole and painting with one coat of synthetic enamel paint of olive green shade of approved quality over a coat of primer both inside and outside after preparation of surface complete all as specified and shown on drawing (Make of Lock- Harison). Drg No : FD/E6/MAP/18, FD-104(M), 109(M), 1033 & 1031

Removing the existing unserviceable shelves and supply of Almirha steel large new shelves made of 1mm thick CRCA sheet to match the existing duly welded/riveted and painted with one coat of synthetic enamel paint of olive green shade of approved quality to match with existing over a coat of primer all as specified and as directed. Drg No : FD/E6/MAP/18, FD-104(M), 109(M), 1033 & 1031

Almirah Medium Steel Removing the unserviceable lock of Almirah steel small and tighting of loose parts of the locking device and supply and fix new lock 7 lever with duplicate keys all as specified and shown on drawing (Make of Lock- Harison). Drg No :FD-1032, 1030 & 67

Removing the existing unserviceable 3 way locking device of Almirah steel med and fix new locking device with necessary fittings and painted with one coat of synthetic enamel paint of olive green shade of approved quality to match with exiting all as specified and as directed. Drg No :FD-1032, 1030 & 67

Removing the existing unserviceable handle of Almirah steel small, supply and fix 100 mm size new chromium plated steel handle of approved quality all as specified and shown on drawing. Drg No :FD-1032, 1030 & 67

Removing the existing unserviceable leg, supply and fix new leg made of 1mm thick CRCA sheet to match the existing duly welded/riveted of Almirah steel med and painted with one coat of synthetic emamel paint of olive green shade of approved quality to match with existing over a coat of primer all as specified and as directed. Drg No :FD-1032, 1030 & 67

Removing the existing unservicable/Rusted door shutters (both) of Almirah steel med, supply and fix new door shutters made of 1mm thick CRCA sheet including chromium plated steel handle 100mm size -01 No, 3 way locking device with 7 lever brass lock with duplicate keys- 01 No, key hole and painting with one coat of synthetic enamel paint of olive green shade of approved quality over a coat of primer both inside and outside after preparation of surface complete all as specified and shown on drawing (Make of Lock- Harison). Drg No :FD-1032, 1030 & 67

Removing the exisiting unserviceable shelves of Almirah steel medium, supply and fix new shelves made of 1mm thick CRCA sheet to match the existing duly welded/riveted and painted with one coat of synthetic emamel paint of olive green shade of approved quality to match with existing over a coat of primer all as specified and as directed. Drg No :FD-1032, 1030 & 67

Bed Hard 6'x3' with/ with out MNF Set Material & labour for removing unserviceable head board from bed plywood top and supply and fix new head board comprising of outer member made of shisham wood and internal frame made of cheer wood, covered both sides of head board with 3.5 mm thick OSTplywood and also to provide 12mm thick half cut teak wood beading all as specified and shown on drawing. Drg No : FD-21(M), 245 & 246

Material & labour for removing unserviceable foot board from bed plywood top and supply and fix new foot board comprising of outer member made of shisham wood and internal frame made of cheer wood, covered both sides of foot board with 3.5 mm thick OST plywood and also to provide 12mm thick half cut teak wood beading all as specified and shown on drawing. Drg No : FD-21(M), 245 & 246

Material & labour for removing unserviceable long rail from bed plywood top and supply and fix new long rail of size 90 x 35 mm of appropriate length made of shisham wood complete all as specified and shown on drawing. Drg No : FD-21(M), 245 & 246

Material & labour for removing unserviceable stiffner from bed plywood top and supply and fix new stiffner of size 90 x 35 mm of appropriate length made of shisham wood complete all as specified and shown on drawing. Drg No : FD-21(M), 245 & 246

Supply and fix wooden bracket made of shesham wood between the leg from bed plywood top and long rail of bed to prevent shaking of the bed as directed. Drg No : FD-21(M), 245 & 246

Material & labour for removing unserviceable plywood from top of the bed from bed plywood top and supply and fix new top made of 12mm BWR phenol bonded commercial plywood with suitable screws all as specified and shown on drawing. Make : National/kitply/Greenply. Drg No : FD-21(M), 245 & 246

Bench Workshop 1500/ 1800x900x760mm B,C,E & G Type Preparation of old surfaces of steelsurface with wire brush, steel scraper and surface rubbed with sand paper to remove small scale and rust so as to obtain a clean surface and applying two coat of synthetic enamel paint of colour as per perivious pattren colour. Drg No : FD-1024, 42, F-2/MG/246

Book Case Steel (Large/Small) Material and labour for preparation of Stell surfaces with sand/emery paper and applying two coat of synthetic enamel paint/french polish of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with beas wax for the book self steel large/small all as specified and shown on drawings. Drg No : FD-1028, 69(M)

Chair CBA Tubular Steel with/ with out Arms Removing unserviceable seat and back (boath) frame from chair tubular steel with/without arms and supply and fix new seat and back (boath) frame made out of shisham wood painting with black paint duly plastic canned in 'Godrej' pattern with plastic cane 2mm width and borders with 4mm wide plastic cane fixed with screws 4 Nos and nuts to the chair frame complete incl tublar steel surface painting two coats of OG/Gray and PVC shoes (04 Nos each chair) all as per drawing as specified. Drg No : FD-75(M), 75, 120(M)

Removing broken handle from chair steel tubular with and replacing with new handle made of shisham wood duly and fixed to the chair tubular with arms with screws of suitable size to the chair frame all as shown on drawing and as directed. Drg No : FD-75(M), 75, 120(M)

Supply & Fixing of bars MS Flat 25 x 25 x 4mm thick duly painted welded at four corner at bottom of the seat only to support from chair steel tubular with/ without arms and also screwed with the seat at two places complete all as specified and as directed. Drg No : FD-75(M), 75, 120(M)

Chair Computer Revolving MAP Material & labour for removing the existing damaged twin wheel casters from chair computerand supply and fix new caster duly fixed to match with the existing all as specified and as directed . Drg No : FD/E6/MAP/01

Material & labour for repairs to seat from chair computer and back of Chair providing new tepastry/polister cloth and rubber foam including replacement of arms rest with new arm rest and repairs to gas lifting and swivel machenism to its original condition complete including greasing, painting etc all as specified. Drg No : FD/E6/MAP/01

Material & labour for removing unserviceable PVC arms rest supply from chair computer and fix new PVC arms rest as to match with the existing all as specified and as directed. Drg No : FD/E6/MAP/01

Chair Dining Offr (Polyproplylene) Removing the U/S components (sear & back) chair dining and providing new components of size and shape shown in Drg Polishing/ painting of all exposed parts of chair dining offr all as per drg & directed at site. Drg No : FD-262

Chair School with Hand Board Removing the U/S components chair school with hard board and providing new components of size and shape shown in Drg Polishing/ Painting of all exposed parts of chair School with hand board all as per drg & directed on site. Drg No : FD/E6/MAP/05

Chair Verandah MAP Offr (PVC Seat/ back) Material and Labour for removing old unservicable PVC seat/back from chair verandah, cleaning Tubular surface provided one coat of white paint and fixing new PVC seat/back as per approved matt pattern and fix rubber Shoes for all the four legs etc complete all as per drg and all as specified and directed. Drg No : FD/MAP-II/06

Chair Verandah Offr FD (Nylon caning) Mat Pattern Material and Labour for removing old unservicable cane plastic from chair verandah, cleaning Tubular surface provided one coat of white paint and recaning with 4 mm New plastic cane closely kitted as per approved matt pattern and fix rubber Shoes for all the four legs etc complete all as per drg and all as specified and directed. Drg No : FD - 359

Preparation of old surfaces of Chair verahdah with wire brush, steel scraper and surface rubbed with sand paper to remove small scale and rust so as to obtain a clean surface and applying one coat of synthetic enamel paint of white colour as per existing all as specified and as directed. Drg No : FD - 359

Chair Verandah FD (Nylon Newar) JCO/OR Material and Labour for removing old unservicable newar from chair verandah JCO/OR, cleaning Tubular surface provided one coat of white paint and recaning with 55mm New newar closely kitted as per approved matt pattern and fix rubber Shoes for all the four legs etc complete all as per drg and all as specified and directed. Drg No : FD - 256

Material & labour for removing the unserviceable conduit part from chair verandah JCO/OR frame and replace the same with new MS conduit 20mm bore,1.6mm thick, upto 30cm length, made to shape, duly welded all as directed. Drg No : FD - 256

Chair Writing Offr MAP Material & labour for removing unserviceable arms rest from chair writing steel and supply and fix new arms rest as to match with the existing, incl painting steel surface all as specified and as directed. Drg No : FD/E6/MAP/12

Material & labour for removing torn/worn out latherite cloth with cushion of seat and back from chair writing steel and supply and fix new latherite cloth with cushion of approved shade and quality with best upholstery including minor repairs all as specified and as directed. Drg No : FD/E6/MAP/12

Chair Writing Steel (Offr Mess) Removing the following unserviceable components of chair writing and providing new components of size and shape shown in Drg and polishing/painting all exposed parts of chair writing aall as specificed and directed Drg No : FD - 360

Charpoy GI PIPE 32 MM DIA & Charpoy MS rect tube withplytop Single & Double Tier steel Taking down existing wornout plywood top or cotton/Nylon Newar from charpoy GI pipe 32 mm dia and Supplying and fixing in repairs new ply wood BWR grade of size (1980x900mm) 12 mm thick of Make Kitply/Centuryply/Archidply/National alongwith 3 Nos angle iron stiffener of 25 x 25 x 3 mm thick 900mm long by drilling hole in GI/MS pipe with 10 in Nos Counter sunk screws and nuts including 2 coats of synthetic enamel paint over a coat of red oxide zinc chrome primer on angle iron new steel surface as directed by Engr-in-charge . Drg No : FD - 112(M), 220,221 & TD-2006

Taking out existing unserviceable GI pipe elbow from GI pipe charpoy and supplying & fixing new GI elbow 32 mm bore, three way, medium grade, approved quality complete all as specified and as directed. Drg No : FD - 112(M), 220,221 & TD-2006

Taking out existing unserviceable GI check nut from GI charpoy and supplying & fixing new 32 mm GI check nut complete all as specified and as directed. Drg No : FD - 112(M), 220,221 & TD-2006

Taking down existing unserviceable GI pipe long rail of 32 mm bore GI pipe charpoy and supplying & fixing new long rail using 32 mm bore GI pipe, medium grade, approved quality, of length as per existing long rail with proper threading complete all as specified and as directed . Make : ASIAN / TATA / JINDAL Drg No : FD - 112(M), 220,221 & TD-2006

Taking down the existing short rails and making the existing GI pipe long rails 32 mm bore obtained from Item No.(d) above into short rail by cutting, threading suitably and fixing with existing old elbow complete all as specified and as directed Drg No : FD - 112(M), 220,221 & TD-2006

Making the existing unserviceable GI pipe short rail 32 mm bore of charpoy converting into legs by cutting, threading suitably and fixing with existing elbow including providing 3 mm thick MS base plate equal to outer dia of the pipe, welded at the bottom of the leg and two Nos clamps made out of 3 mm thick MS black sheet welded to each legs for holding mosquito net frame set frame all as shown in drawing including one coat of black enamel paint to mosquito net frame complete all as specified and as directed. Drg No : FD - 112(M), 220,221 & TD-2006

Charpoy Folding IP with Ply Top/ Newar Taking down existing wornout plywoodtop or cotton/Nylon Newar from charpoy folding IP conduit pipe 35 0 2mm dia and Supplying and fixing in repairs new ply wood BWR grade of size (1980x900mm) 12 mm thick of Make Kitply/Centuryply/Archidply/National alongwith 3 Nos angle iron stiffener of 25 x 25 x 3 mm thick 900mm long by drilling hole in GI/MS pipe with 10 in Nos Counter sunk screws/ folding open/ close arrangement bent @ 150 D and nuts (all replacements/ repairs as per drg) including 2 coats of synthetic enamel paint over a coat of red oxide zinc chrome primer on angle iron new steel surface as directed by Engr-in-charge . Drg No : FD/MAP-II/01, FD-388 & 1119

Desk Stand Lecture (Steel) Removing the unserviceable components of Desk Stand Lecture (Steel) and providing new components of size and shape shown in Drg and polishing/ Painting all exposed parts (Steel/ Wooden) of Desk Stand Lecture after repairs / replacement of Parts. Drg No : FD-1022 & 107

Form with and with out back Removing the unserviceable Seat & Back from Form with and with out back and providing new Seat & Back of size and shape shown in Drg and polishing/ Painting all exposed parts (Steel/ Wooden) of Form with and with out back after repairs / replacement of Parts. Drg No : FD-77M,1027 & 78M

Ladder Aluminium Removing the unserviceable components of Ladder Aluminium and providing new components of size and shape shown in Drg Drg No : FD-1025

Locker Steel Removing the existing unserviceable handle of Locker steel , supply and fix 100 mm size new chromium plated steel handle of approved quality all as specified and shown on drawing. Drg No : FD - 1029

Removing the existing unserviceable hasp & stapple of Locker steel , supply and fix new chromium plated steel hasp & stapple of approved quality and appropriate size all as specified and shown on drawing. Drg No : FD - 1029

Removing the existing unservicable/Rusted door shutters (both) of Locker steel , supply and fix new door shutters made of 1mm thick CRCA sheet including chromium plated steel handle 100mm size -01 No, chromium plated hasp & stapple of approved quality and appropriate size and painting with one coat of synthetic enamel paint of olive green shade of approved quality over a coat of primer both inside and outside after preparation of surface complete all as specified and shown on drawing. Drg No : FD - 1029

Rack Steel Adjt/6 tier 1830x760x1905mm Removing the existing unserviceable angle iron of Rack steel Adjt/6 tier 1830 x 760 x 1905 MM and supply and fix new MS angle iron of size 30 x 30 x 3mm thick, including painting with one coat of synthetic enamel paint olive green shade of approved quality over a coat of primercomplete all as specified and shown on drawing. Drg No : FD-129M, 1038,

Removing the existing unserviceable shelves of Rack steel Adjt/6 tier 1830 x 760 x 1905 MM and supply and fix new shelves of size 760 x 915mm made of 1mm CRCA sheet in appropriate size and shape including painting with one coat of synthetic enamel paint olive green shade of approved quality over a coat of primer complete all as specified and shown on drawing. Drg No : FD-129M, 1038,

Rack Shoe Steel Removing the existing unserviceable 20/ 25mm dia MS Pipe, 3mm dia MS rod and supply and fix new 20/ 25mm dia MS Pipe, 3mm dia MS rod , including cleaning & painting with one coat of synthetic enamel paint black shade of approved quality over a coat of primercomplete all as specified and shown on drawing of Rack shoe steel. Drg No : FD/E6/MAP/02R

Removing the existing unserviceable PVC shoes of rack shoe steel and fix new one as per specified and directed in drg. Drg No : FD/E6/MAP/02R

Rack Side (Side Rack with Tray) 3 spaces/ 3tier Removing the existing unserviceable angle iron of Rack steel Adjt/6 tier 1830 x 760 x 1905 MM and supply and fix new MS angle iron of size 30 x 30 x 3mm thick, including painting with one coat of synthetic enamel paint olive green shade of approved quality over a coat of primercomplete all as specified and shown on drawing. Drg No : FD-1023, 81M & 97M

Removing the existing unserviceable shelves of Rack steel Adjt/6 tier 1830 x 760 x 1905 MM and supply and fix new shelves of size 760 x 915mm made of 1mm CRCA sheet in appropriate size and shape including painting with one coat of synthetic enamel paint olive green shade of approved quality over a coat of primer complete all as specified and shown on drawing. Drg No : FD-1023, 81M & 97M

Receptacle Large/ Small with Bucket Steel Removing the unserviceable components of Receptacle Large/ small with bucket and providing new components of size and shape shown in Drg and Painting one coat black enamel all exposed parts FD - 1044, 43, 130M & 1045

Stool Steel 2'/ 3' Material and Labour for cleaning the surface of Stool Steel 2'/ 3' steel by scraping with emery paper filling holes with putty wherever reqd and shall be spray painted internally and externally with two coats of synthetic enamel paint of approved shade ones where required all as specified and directed. Drg No : FD-81M & 409

Table/ Table Hav/OR Steel (various sizes) with/ with out drawers Removing the existing unserviceable table top of Table/ Table Hav/OR Steel (various sizes) with/ with out drawers Table 900 x 900 x 760MM, 1520x860x760 and various size as per above drg and supply and fix new top made of 18mm thick pre-laminated particle board one side teak face including provision of 4mm thick teakwood beading all around complete all as directed. Drg No : FD - 1010, 1007, 1009, 1017, 1013, 1012 & 1008

Removing the existing unserviceable/rusted leg of Table/ Table Hav/OR Steel (various sizes) with/ with out drawers (Table 900 x 900 x 760MM, 1520x860x7600) and supply and fix 25 x 25 x 1.6mm thick MS squire pipe leg duly welded to the frame and painted with one coat of synthetic enamel paint over a coat of primer all as directed. Drg No : FD - 1010, 1007, 1009, 1017, 1013, 1012 & 1008

Supply and fix new PVC shoe suitable to the leg of Table/ Table Hav/OR Steel (various sizes) with/ with out drawers (Table 900 x 900 x 760MM, 1520x860x7600) after removing the unserviceable shoe (04 Nos Each). Drg No : FD - 1010, 1007, 1009, 1017, 1013, 1012 & 1008

Table Conf (Library) Steel and Table cook house Removing the existing unserviceable/rusted leg/stiffener of Table conf and table cook house and fix 25 x 25 x 1.6mm thick MS squire pipe duly welded to the frame to match with original shape and position including minor repairs to the table and painting the replaced portion all as directed. Drg No : FD - 1001 & 49M,136 & 377

Removing the existing unserviceable table top of Table conf and table cook house and supply and fix new top made of 18mm thick pre-laminated particle board one side teak face including provision of 4mm thick teakwood beading all around complete all as directed. Drg No : FD - 1001 & 49M,136 & 377

Supply and fix new PVC shoe suitable to the leg of Table conf and table cook house after removing the unserviceable shoe (04 Nos Each). Drg No : FD - 1001 & 49M,136 & 377

Table Office Officer/ Clerk Steel Removing the existing unservicable/rusted drawer complete of Table office officer/clerk steel and supply and fix new drawer complete made of 1mm CRCA sheet including painting with synthetic enamel paint of olive green shade of approved quality over a coat of primer both inside and outside including preparation of surfaces and repairing inter locking system and providing new lock 6 lever to top drawer all as specified and shown on drawing (Make of Lock : Harison/Godrej). Drg No : FD - 1004, 1003, 1002 & 84

Removing the existing unserviceable/rusted leg/stiffener of Table office officer/clerk steel , supply and fix 25 x 25 x 1.6mm thick MS squire pipe duly welded to the frame and painted with one coat of synthetic enamel paint over a coat of primer all as directed. Drg No : FD - 1004, 1003, 1002 & 84

Removing the existing unserviceable lock of Table office officer/clerk steel and supply and fix new lock of 6 levers with duplicate keys including removing dents and adjustment of locking device of drawers for smooth functioning complete all as specified and as directed. Drg No : FD - 1004, 1003, 1002 & 84

Removing the existing unserviceable side panel of table' locker of Table office officer/ clerk steel and fix new locker made of 1mm CRCA sheet including painting with synthetic enamel paint of olive green shade of approved quality over a coat of primer both inside and outside including preparating of surfaces complete all as specified and as directed. Drg No : FD - 1004, 1003, 1002 & 84

Removing the existing unserviceable table top of Table office officer/ clerk steel ), supply and fix new top made of 18mm thick pre-laminated particle board one side teak face including provision of 4mm thick teakwood beading all around complete all as directed. Drg No : FD - 1004, 1003, 1002 & 84

Supply and fix new PVC shoe suitable to the leg of Table office officer/clerk steel after removing the unserviceable shoe. Drg No : FD - 1004, 1003, 1002 & 84

Teapoy Verandah Removing the following U/S components (i.e.top railing & tray) of Teapoy and providing new components of size and shape shown in Drg and polishing/ painting all exposed steel and wooden parts of Teapoy after repairs / replacement of parts:- Drg No : FD/E6/MAP/17 & FD-255

Removing the existing unserviceable/rusted leg of teapoy verandah and supply and fix 25 x 25 x 1.6mm 18mm thick MS squire pipe leg duly welded to the frame and painted with one coat of synthetic enamel black paint over a coat of primer all as directed. Drg No : FD/E6/MAP/17 & FD-255

Trestle Store Iron Preparation of old surfaces of steel furniture with wire brush, steel scraper and surface rubbed with sand paper to remove small scale and rust so as to obtain a clean surface and applying one coat of synthetic enamel paint of colour as per existing both inside and outside complete all as specified and as directed to the following items: Drg No : FD - 1043

Taking down existing wornout plywood top from Bed/ charpoy IP hard top 6'x3' with and with out MNF set (MAP) and Supplying and fix new 12mm th plywood BWR grade of existing size of Make Kitply/Centuryply/Archidply/National alongwith 3 Nos MS tube/ pipe stiffener of 25 x 25 mm x 16/18 gauge thick by welding with screwed with MS cleat and stiffeners with cup & washer. Rest all as specified and as directed on drg.

Preparation of old steel surfaces of Bed/ charpoy IP hard top 6'x3' with and with out MNF set MAP with wire brush, steel scraper and surface rubbed with sand paper to remove small scale and rust so as to obtain a clean surface and applying 02 coats of synthetic enamel paint over a coat of red oxide zinc chrome primer on steel surgface of colour as per existing both inside and outside complete all as specified and as directed on drg.

Material and Labour for removing old unserviceable hard rubber toes from Bed/ charpoy IP hard top 6'x3' with and with out MNF set MAP and supply and fix new one of existing size. Rest all as specified and as directed on drg.

Material and Labour for removing existing wornout screws from Bed/ charpoy IP hard top 6'x3' with and with out MNF set MAP and supply and screwed with MS cleat & stiffeners with cup and washer of existing size. Rest all as specified and directed on drg.

Supply Material and labour after preparation of steel surfaces by removing the uneven surfaces and then apply Two coats of synthetic enamel Paint by Spraying finished even steel surface on both internal & external sides all as directed by Eng- in –Charge for following Items. Almirah Steel Large FD-67/FD-1031

Almirah Steel Medium FD-67, FD-1032, FD-243

Almirah Map Steel FD-1030

Book Case steel FD-1028

Locker FD-257

Rack Steel Adjt/6 tier 1830x760x1905mm Drg No : FD-129M, 1038,

Table Office Officer/ Clerk Steel Drg No : FD - 1004, 1003, 1002 & 84

Almirah Large/ Medium Steel with Shelves ( all type TP) Removing the unserviceable lock of Almirah steel large and tighting of loose parts of the locking device and supply and fix new lock 7 lever with duplicate keys all as specified and directed on site (Make of Lock- Harison). Drg No : T P

Removing the existing unserviceable handle of Almirah steel large , supply and fix 100 mm size new chromium plated steel handle of approved quality all as specified and directed on site. Drg No : T P

Removing the existing unserviceable leg of Almirah steel large, supply and fix new leg made of 1mm thick CRCA sheet to match the existing duly welded/riveted and painted with one coat of synthetic emamel paint of olive green shade of approved quality to match with existing over a coat of primer all as specified and as directed on site. Drg No : T P

Removing the existing unserviceable 3 way locking device and suppply of Almirah steel large and fix new locking device with necessary fittings and painted with one coat of synthetic enamel paint of olive green shade of approved quality to match with exiting all as specified and as directed on site. Drg No : T P

Removing the existing unservicable/Rusted door shutters (both), supply and fix new door shutters made of 1mm thick CRCA sheet including chromium plated steel handle 100mm size -01 No, 3 way locking device with 7 lever brass lock with duplicate keys- 01 No, key hole and painting with one coat of synthetic enamel paint of olive green shade of approved quality over a coat of primer both inside and outside after preparation of surface complete all as specified and directed on site (Make of Lock- Harison). Drg No : T P

Removing the existing unserviceable shelves and supply of Almirha steel large new shelves made of 1mm thick CRCA sheet to match the existing duly welded/riveted and painted with one coat of synthetic enamel paint of olive green shade of approved quality to match with existing over a coat of primer all as specified and as directed on site. Drg No : T P

Bar Stool 3' hight Steel with Cushion (TP) Material and Labour for cleaning the surface of Stool Steel 2'/ 3' steel by scraping with emery paper filling holes with putty wherever reqd and shall be spray painted internally and externally with two coats of synthetic enamel paint of approved shade ones where required all as specified and directed on site. Drg No : T P

Material and Labour for removing old unservicable castro wheels and old fabric form seat from the Stool revolving all types and supply and fix new castro wheel and fabric form seat all as specified and directed on site. Drg No : T P

Chair Revolving Computer, Executive (HB, MB, LB), Visitor, writing & Conf Room Revolving ( all type T P Chairs) Material and Labour for removing old unservicable gas lift from chair revolving all types and supply and fix new gas lift, all as specified and directed on site. Drg No : T P

Removing the old seat/Back upholstery of chair revolving & Supplying and fixing new cushion of 75mm thick, 'U' Foam of make "SLEEP WELL" with cloth cover of approved quality and colour to match all as per existing complete all as specified and as directed on site. Drg No : T P

Removing the unserviceable caster wheel & Supplying and fixing new caster wheel as per existing complete all as specified and as directed on site. Drg No : T P

Removing the unserviceable PVC handle & Supplying and fixing new handle as per existing complete all as specified and as directed on site. Drg No : T P

Removing the unserviceable locking device & Supplying and fix Locking Device as per existing complete all as specified and as directed on site. Drg No : T P

Removing unserviceable bottom & Supplying and fixing bottom as per existing complete all as specified and as directed on site. Drg No : T P

Rifle and Pistol Rack all type (TP) Material and labour for Removing unserviceable parts and fix new one to Rifle rack all type (TP). Preparation of wooden/ steel surfaces with sand/emery paper and applying french polish/ paint of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with beas wax all as specified and directed on site Drg No : T P

Racks all type (TP) Material and labour for Removing the existing unserviceableparts of Racks all type TP and replace the same with new one of various size and preparation of wooden/ steel surfaces with sand/emery paper and applying french polish/ paint of approved quality to achieve uniform smooth texture and high glossy finish after repair all as specified and as directed on site. Drg No : T P

Safe Defender all type TP Removing the unserviceable lock of Safe defender and tighting of loose parts of the locking device and supply and fix new lock as existing model with duplicate keys all as specified and directed on site. Drg No : T P

Removing the existing unserviceable handle of safe defender supply and fix new one chromium plated steel handle of approved quality and painting with one coat of synthetic enamel paint of existing colour of approved quality over a coat of primer both inside and outside after preparation of surfaceall as specified and directed on site. Drg No : T P

Almirah Medium Wooden Material and labour for preparation of wooden surfaces with sand/emery paper and applying french polish of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with beas wax for theAlmirah wooden all as specified and shown on drawing. Drg No : WDF - 22

Bin Lenin Multipurpose Removing the existing unserviceable door shutters (both) ofBin Lenin Multipurpose and supply and fix new door shutters (both) as to match with the existing, made of 18mm thick teak face Pre-laminated particle board exterior grade duly providing 6mm thick teak wood beading all round including all fittings and fixtures all as shown on drawing and as directed Note :- (a) Knob shall be aluminium anodized (dark brown chromium plated of approved size and quality) (b) Hinges shall be 50mm of approved quality. Drg No : FD/E6/MAP/09, FD - 1104 & 15M

Removing the existing unserviceable front portion of the drawer of Bin lenin multipurpose and supply and fix new front portion of the drawer as to match with the existing made out of 18mm thick teak face Pre-laminated particle board with laminated finish including new knob all as specified and shown on drawing. Drg No : FD/E6/MAP/09, FD - 1104 & 15M

Removing the exisiting unserviceable top from the Bin lenin multipurpose and supply and fix new top as to match with the existing, made out of 18mm thick teak face Pre-laminated praticle board with laminated finish duly providing 4mm thick teak wood beading all round duly french polish all as specified and as shown on drawing. Drg No : FD/E6/MAP/09, FD - 1104 & 15M

Removing the existing unserviceable plywood from sides (both) of Bin lenin multipurpose supply and fix new 3.5mm thick one side teak face plywood on sides (both) as to match with the existing all as specified and shown on drawing Drg No : FD/E6/MAP/09, FD - 1104 & 15M

Removing the existing unserviceable back of Bin lenin multipurpose and supply and fix new back as to match with the existing , made out of 6mm thick commercial ply wood all as specified and shown on drawing Drg No : FD/E6/MAP/09, FD - 1104 & 15M

Board Display with/ with out glass shutter and Board notice/ black with easel Removing broken glass of board notice/ display of size 1830 mm x 1220 mm and supply & fixing of new glass 4 mm thick of glass size 1830x 1220 mm As specified and directed in drg. Drg No : FD-1041, 71M, 99M, 1042, 16 & 117

Removing u/s soft board of Board Notice of supply & fixing of new soft board of size 1145x 1755 mm on board notice size 1830 x 1220 Drg No : FD-1041, 71M, 99M, 1042, 16 & 117

Removing u/s Green Baize Cloth of Board Notice of supply & fixing of new Green Baize cloth of size 1145x 1755 mm on board notice size 1830 x 1220 Drg No : FD-1041, 71M, 99M, 1042, 16 & 117

Book Case ( Large/ Small)Wooden Material and labour for preparation of wooden surfaces with sand/emery paper and applying french polish of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with beas wax for the book case wooden all as specified and shown on drawing Drg No : FD - 45

Material and labour for removing u/s knobs, handle, hinges and locking arrangements and supply and fix new one as per existing models for the book case wooden all as specified and shown on drawing. Drg No : FD - 45

Chair Dining JCO/OR Material & labour for removing unserviceable/ broken Rear leg from chair dining and supply and fix new rear leg as to match with the existing, made of shisham wood all as specified and shown on drawings. Drg No : FD - 279 & FD /MAP-II/05

Material & labour for removing unserviceable/ broken Front leg from chair dining and supply and fix new front leg as to match with the existing, made of shisham wood all as specified and shown on drawings. Drg No : FD - 279 & FD /MAP-II/05

Material & labour for removing unserviceable/ broken Rear/front/side rail from chair dining and supply and fix new Rear/front/side rail as to match with the existing, made of shisham wood all as specified and shown on drawings. Drg No : FD - 279 & FD /MAP-II/05

Material & labour for removing unserviceable/ broken Stiffener from chair dining and supply and fix new Stiffener as to match with the existing, made of shisham wood all as specified and shown on drawings. Drg No : FD - 279 & FD /MAP-II/05

Material & labour for removing unserviceable/ broken Back rest from chair dining and supply and fix new Back rest as to match with the existing, made of shisham wood all as specified and shown on drawings. Drg No : FD - 279 & FD /MAP-II/05

Removing the existing cane from chair dining and recanning in 'Godrej' pattern with 2mm wide & 0.6mm thick for centre portion and 4mm wide plastic cane for borders all as directed or supply & fix of PVC seat, the seat shall be made out of 4mm thick moulded PVC visible like Godrej Pattern in a single piece and removing unserviceable PVC rings and fix new one. Drg No : FD - 279 & FD /MAP-II/05

Chair Dining Cushioned Offr Removing unserviceable Rear leg from chair dinning cushioned and supply and fix new rear leg made of shisham wood as to match with the existing all as specified and shown on drawing. Drg No : FD - 357 & FD/MAP-II/04

Removing unserviceable Front leg from chair dinning cushioned and supply and fix new front leg made of shisham wood as to match with the existing all as specified and shown on drawing. Drg No : FD - 357 & FD/MAP-II/04

Removing unserviceable side/back/front rails of the seat from chair dinning cushioned and supply and fix new rails made of shisham wood as to match with the existing all as specified and shown on drawing. Drg No : FD - 357 & FD/MAP-II/04

Removing unserviceable Stiffener from chair dinning cushioned and supply and fix new stiffener made of shisham wood as to match with the existing all as specified and shown on drawing. Drg No : FD - 357 & FD/MAP-II/04

Removing the existing unserviceable latherite cloth with cushion from chair dinning cushioned and replace the same with new latherite cloth and cushion of appropriate size of 40/32 density cool foam all as specified and as directed. Drg No : FD - 357 & FD/MAP-II/04

Chair Easy Material & labour for removing unserviceable/ broken Rear leg from chair easy (FD-1108/229) and supply and fix new rear leg as to match with the existing, made of shisham wood all as specified and shown on drawings. Dgr No : FD - 229

Material & labour for removing unserviceable/ broken Front leg from chair easy and supply and fix new front leg as to match with the existing, made of shisham wood all as specified and shown on drawings. Dgr No : FD - 229

Material & labour for removing unserviceable/ broken arms from chair easy and supply and fix new arms as to match with the existing, made of shisham wood all as specified and shown on drawings. Dgr No : FD - 229

Material & labour for removing unserviceable/ broken front/back/Side rail of seat & back from chair easy and supply and fix new front/back/Side rail of seat as to match with the existing, made of shisham wood all as specified and shown on drawings. Dgr No : FD - 229

Removing the existing cane from seat & back of the chair from chair easy and recanning in 'Godrej' pattern with 2mm wide & 0.6mm thick for centre portion and 4mm wide plastic cane for borders all as directed. Dgr No : FD - 229

Chair Easy Cushioned Material & labour for removing unserviceable/ broken Rear leg from chair easy cushioned and supply and fix new rear leg as to match with the existing, made of shisham wood all as specified and shown on drawings. FD - 358

Material & labour for removing unserviceable/ broken Front leg chair easy cushioned and supply and fix new front leg as to match with the existing, made of shisham wood all as specified and shown on drawings. FD - 358

Material & labour for removing unserviceable/ broken side/front rail chair easy cushioned and supply and fix new Side rail as to match with the existing, made of shisham wood all as specified and shown on drawings. FD - 358

Material & labour for removing unserviceable seat & back chair easy cushionedand supply and fix new seat & back consisting of 6mm plywood commercial, 40/32 Density cool foam duly covered with Rexin Cloth of best quality as directed. Seat & Back shall be upholstered complete as specified. FD - 358

Chair Wooden Bottom with out Arms Removing the following unserviceable components /parts of chair WBB and providing new parts all as specified and shown in Drg and polishing all exposed parts of chair WBB after repairs replacement of following parts:- IInd class Hardwood rear leg made out of size 30x 55 x 835 mm Drg No : 225 & 285

IInd class Hardwood front leg made out of size 30 x55x455 mm Drg No : 225 & 285

Stiffener made of IInd class Hardwood of size 440x25x20mm Drg No : 225 & 285

Seat made out of 6 mm thick Ply wood BWR Gde of size 440 x 445mm Drg No : 225 & 285

Chair Writing (JCO's PVC Caning) Material & labour for removing unserviceable/ broken Rear leg from chair writing (JCOs) and supply and fix new rear leg as to match with the existing, made of shisham wood all as specified and shown on drawings. Drg No : FD - 280

Material & labour for removing unserviceable/ broken Front leg from chair writing (JCO's) and supply and fix new front leg as to match with the existing, made of shisham wood all as specified and shown on drawings. Drg No : FD - 280

Material & labour for removing unserviceable/ broken Rear/front/Side rail from chair writing (JCO's) and supply and fix new Rear/front/Side rail as to match with the existing, made of shisham wood all as specified and shown on drawings. Drg No : FD - 280

Material & labour for removing unserviceable/ broken arms from chair writing (JCO's) and supply and fix new arms as to match with the existing, made of shisham wood all as specified and shown on drawings. Drg No : FD - 280

Material & labour for removing unserviceable/ broken Back rest from chair writing (JCO's) and supply and fix new Back rest as to match with the existing, made of shisham wood all as specified and shown on drawings. Drg No : FD - 280

Material & labour for removing unserviceable/ broken Stiffener from chair writing (JCO's) and supply and fix new Stiffener as to match with the existing, made of shisham wood all as specified and shown on drawings and polishing all expouse wooden parts Drg No : FD - 280

Removing the existing cane from seat & back of the chair from chair writing (JCO's)) and recanning in 'Godrej' pattern with 2mm wide & 0.6mm thick for centre portion and 4mm wide plastic cane for borders all as directed. Drg No : FD - 280

Desk Stand Lecture Wooden Removing the existing unserviceable parts of desk stand lecture and supply and fix parts made of shisham wood to match with existing all as specified and shown on drawing (incl polishing/ painting). Drg No : FD - 125

Dressing Mirror Gents MAP Material & labour for removing the existing unseviceable looking mirror from Dressing mirror Gents and supply and fix new looking mirror of 5.5mm thick of appropriate size along with 6mm thick commercial plywood back of the mirror including minor repairs all as specified and shown on drawings. Note : Make of Mirror should be of Modiguard/St Gobain/Atul. Drg No : FD/E6/MAP/16

Material and labour for removing the unserviceable drawers from the Dressing mirror Gents and supply & fix new drawer made out of 12mm commercial plywood and front side made of 18mm thick prelaminated particle board one side laminated finish all as specified and shown on drawings and polishing all internal and exposed wooden parts. Drg No : FD/E6/MAP/16

Removing broken / UNSV cabinets and S&F new cabinets all as specified and shown in Drg. Drg No : FD/E6/MAP/16

Hat Stand with Miiror Removing UNSV parts(i.e. hook & morror) of Hat Sand mirror and S&F new one and polishing all as specified and shown in Drg. Drg No : FD - 233

Hot Case Large/ Small Material and labour for preparation of wooden surfaces with sand/emery paper and applying french polish of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with beas wax for the book case wooden all as specified and shown on drawing Drg No : FD - 363, 364 & 46M

Removing the existing unserviceable door shutters (both) of Hot case large/ smalland supply and fix new door shutters (both) as to match with the existing, made of 18mm thick teak face Pre-laminated particle board exterior grade duly providing 6mm thick teak wood beading all round including all fittings and fixtures all as shown on drawing and as directed Note :- (a) Knob shall be aluminium anodized (dark brown chromium plated of approved size and quality).

Mirror with Shelves Removing broken knobs, S&F new knobs shall be used of 32 mm dia round chromium plated. Drg No : FD - 52M

Side Board Large/ Small Removing the existing unserviceable door shutters (both) of side board and supply and fix new door shutters (both) as to match with the existing, made of 18mm thick teak face Pre-laminated particle board exterior grade duly providing 6mm thick teak wood beading all round including all fittings and fixtures all as shown on drawing and as directed Note :- (a) Knob shall be aluminium anodized (dark brown chromium plated of approved size and quality) (b) Hinges shall be 50mm of approved quality. Drg No : FD - 241, 371, 372 & 1112

Removing the existing unserviceable front portion of the drawer of side board and supply and fix new front portion of the drawer as to match with the existing made out of 18mm thick teak face Pre-laminated particle board with laminated finish including new knob all as specified and shown on drawing. Drg No : FD - 241, 371, 372 & 1112

Removing the exisiting unserviceable top from the side board and supply and fix new top as to match with the existing, made out of 18mm thick teak face Pre-laminated praticle board with laminated finish duly providing 4mm thick teak wood beading all round duly french polish all as specified and as shown on drawing. Drg No : FD - 241, 371, 372 & 1112

Removing the existing unserviceable plywood from sides (both) of side board supply and fix new 3.5mm thick one side teak face plywood on sides (both) as to match with the existing all as specified and shown on drawing Drg No : FD - 241, 371, 372 & 1112

Removing the existing unserviceable back of side board and supply and fix new back as to match with the existing , made out of 6mm thick commercial ply wood all as specified and shown on drawing Drg No : FD - 241, 371, 372 & 1112

Sofa Sets/ Sofa Chairs 4/5 Seater (3+1+1) Material & labour for removing the old worn/torn out cushion from sofa sets 4/5 seats and tapesty cloth from seat and back of sofa and providing new cushion of 40 density cool foam of size 560 x 530x100mm thick including provision tapesty cloth of approved shade & quality (cost of tapestry cloth shall be more than Rs. 200/- per metre) with zip on one side of cover for easy removing/closing purposes etc over a cover of lining cloth duly covered and stiched over the cushions complete all as directed. Make : sleepwell/curlon and fix of new PVC shoes for each four legs. Drg No : FD -373, 281, 258 & FD/MAP-II/02

Table of size 1520x860x760mm, 900x900x760mm & 900x600x760mm with and with out drawers (various size of all type wooden) Removing the existing unserviceable leg from the Table of size 1520x860x760mm, 900x900x760mm & 900x600x760mm with and with out drawers (various size of all type wooden) supply and fix new leg made of shisham wood to match with the existing all as specified and shown on drawing. Drg No : FD - 283, 284, 289, 293 & 94

Removing the existing unserviceable top rail (long/front) from Table of size 1520x860x760mm, 900x900x760mm & 900x600x760mm with and with out drawers (various size of all type wooden) and fix new rail made of shisham wood to match with the existing all as specified and shown on drawing. Drg No : FD - 283, 284, 289, 293 & 94

Removing the existing unserviceable top rail (short/side) from the Table of size 1520x860x760mm, 900x900x760mm & 900x600x760mm with and with out drawers (various size of all type wooden) and supply and fix new rail made of shisham wood to match with the existing all as specified and shown on drawing. Drg No : FD - 283, 284, 289, 293 & 94

Removing the existing unserviceable side stiffener of table of size 1520x860x760mm, 900x900x760mm & 900x600x760mm with and with out drawers (various size of all type wooden) and supply and fix new stiffener made of shisham wood to match with the existing all as specified and shown on drawing. Drg No : FD - 283, 284, 289, 293 & 94

Removing the existing unserviceable centre stiffener of Table of size 1520x860x760mm, 900x900x760mm & 900x600x760mm with and with out drawers (various size of all type wooden) and supply and fix new stiffener made of shisham wood to match with the existing all as specified and shown on drawing. Drg No : FD - 283, 284, 289, 293 & 94

Removing the existing unserviceable top from the Table of size 1520x860x760mm, 900x900x760mm & 900x600x760mm with and with out drawers (various size of all type wooden)and supply and fix new one as to match with the existing made of 18mm thick pre-laminated particle board one side laminated with 4mm thick teak wood beading duly french polish all as specified and shown on drawing. Drg No : FD - 283, 284, 289, 293 & 94

Table Bed Side Material and Labour removing unserviceable old top/ sides of table bed side and supply and fix new top/side made out of 18 mm thick decorative pre-laminated MDF board exterior grade of approved shade and make with 6 mm TW beading all around (size of top 450x450mm) rest all as specified and directed. Drg No : FD - 276, 157M & FD/E6/MAP/15R

Material and Labour removing unserviceable old back of table bed side and supply and fix new back of exisitng size made out of 12 mm thick BWR Grade plywood all as specified and directed. Drg No : FD - 276, 157M & FD/E6/MAP/15R

Material and Labour for removing old unserviceable Knob from drawers of table bedside and supply and fix new decorative CP handle 75mm (02 os Each)of approved design and make. rest all as specified and directed all as specified and directed. DRG No:FD/E6/MAP/15

Material and Labour for removing unserviceable 18mm MS Square pipe from table bed side and S&F new MS pipe duly powder coated in black colour and fixing necessary PVC shoe all as specified and directed.

Material and Labour for removing unserviceable drawers from table bed side and S&F new drawers on telescopic channel all as specified and directed.

Table Centre Removing the existing unserviceable leg from the Table centre and supply and fix new leg made of shisham wood to match with the existing all as specified and shown on drawing. Drg No : FD - 375 & 274

Removing the existing unserviceable top rail (long/front) from Table centre and fix new rail made of shisham wood to match with the existing all as specified and shwon on drawing. Drg No : FD - 375 & 274

Removing the existing unserviceable top rail (short/side) from the Table centre and supply and fix new rail made of shisham wood to match with the existing all as specified and shown on drawing. Drg No : FD - 375 & 274

Removing the existing unserviceable top from the Table centre and supply and fix new one as to match with the existing made of 18mm thick teak face pre-laminated particle board one side laminated particle board with 4mm thick teak wood beading duly french polish all as pecified and shown on drawing. Drg No : FD - 375 & 274

Table Computer Material and Labour removing unserviceable old top of table computer and supply and fix new top , ISI marked made out of 18 mm thick decorative pre-laminated MDFboard exterior grade of approved shade and make quality with 6 mm TW beading all around (size of top 900x562mm) all as specified & directed. FD/E6/MAP/03

Material and Labour for removing old unserviceable key board tray from table computer and supply and fix new tray made up of 18 mm thick decorative pre-laminated MDFboard exterior grade of approved shade and make quality with 6 mm TW beading all around alongwith telescopic channels of best quality. Rest all as specified and as directed. FD/E6/MAP/03

Material and Labour for removing old unserviceable mouse tray from table computer and supply and fix new tray made up of 18 mm thick decorative pre-laminated MDFboard exterior grade of approved shade and make quality with 6 mm TW beading all around alongwith telescopic channels of best quality. Rest all as specified and as directed. FD/E6/MAP/03

Material and Labour for removing old unserviceable CPU Stand from table computer and supply and fix new CPU Stand made up of 18 mm thick decorative pre-laminated MDFboard exterior grade of approved shade and make quality with 6 mm TW beading all around. FD/E6/MAP/03

Material and Labour for removing old unserviceable Rectangular PVC Shoe from table computer and supply and fix new one of existing size (04 Nos Each) FD/E6/MAP/03

Table Dining 8/ 6/ 4 Person Removing the existing unserviceable leg from the Table dining for 8/ 6/ 4 person and supply and fix new leg made of shisham wood to match with existing all as specified and shown on drawing. Drg No : FD - 273, 291, 239 & FD/MAP-II/03

Removing the existing unserviceable top rail (long/front) from Table dining for 8/ 6/ 4 person and supply and fix new rail made of shisham wood to match with the existing all as specified and shown on drawing. Drg No : FD - 273, 291, 239 & FD/MAP-II/03

Removing the existing unserviceable top rail (short/side) Table dining for 8/ 6/ 4 person and supply and fix new rail made of shisham wood to match with the existing all as specified and shown on drawing . Drg No : FD - 273, 291, 239 & FD/MAP-II/03

Removing the existing unserviceable top from the Table dining for 8/ 6/ 4 person and supply and fix new one as to match with the existing made of 18mm thick pre-laminated particles board one side teak face laminated with 4mm thick teak wood beading all as specified and shown on drawing. Drg No : FD - 273, 291, 239 & FD/MAP-II/03

Table Dresing Gents M&L after removing the existing U/s parts from Table dressing Gents, repairing including S&F new parts of Table dressing gents and all as specified and shown in Drg and directed by Engr-in-charge and polishing to table dressing gents with one coat of spirit polish after preparation of surface. Mirror shall be of 6 mm thick, Make ' MODIGUARD ' duly Teak wood 6 mm thick frame and 6 mm thick plywood BWR commercial on back side with key plate Drg No : FD - 230 & 379

Removing broken /UNSV top and S&F new top/Bottom 18 mm thick pre laminated particle board one side T/F and other side veneered with 4 mm thick teak wood edging around Drg No : FD - 230 & 379

Removing broken / UNSV drawers and S&F new drawer all as specified and shown in Drg. Drg No : FD - 230 & 379

Removing broken knobs, S&F new knobs shall be used of 32 mm dia round chromium plated Drg No : FD - 230 & 379

Table Dressing Ladies M&L after removing the existing U/s parts from Table dressing ladies repairing including S&F new parts of Table dressing ladies and all as specified and shown in Drg and directed by Engr-in-charge and polishing to table dressing ladies with one coat of spirit polish after preparation of surface. Mirror shall be of 6 mm thick, Make ' MODIGUARD ' duly Teak wood 6 mm thick frame and 6 mm thick plywood BWR commercial 6 mm thick on back side of the frame. Drg No : FD - 251 & 378

Top 18 mm thick pre laminated particle board one side Teak finish and one side veneered with 4 mm thick Teak wood edging around Drg No : FD - 251 & 378

Removing broken knobs, S&F new knobs shall be used of 32 mm dia round chromium plated Drg No : FD - 251 & 378

Sliding glass shall be 6 mm thick Make Modiguard /duly machine groomed Drg No : FD - 251 & 378

Table Dressing Ladies incl Stool (MAP) Polishing to table dressing ladies with one coat of spirit polish after preparation of surface Drg No : FD/MAP-II/07

Table Peg Removing the existing unserviceable leg from the Table peg and supply and fix new leg made of shisham wood to match with the existing all as specified and shown on drawing. Drg No : FD - 277 & 384

Removing the existing unserviceable top rail (short/side) from the Table peg and supply and fix new rail made of shisham wood to match with the existing all as specified and shown on drawing. Drg No : FD - 277 & 384

Removing the existing unserviceable top rail (long/front) from Table peg and supply and fix new rail made of shisham wood to match with the existing all as specified and shwon on drawing. Drg No : FD - 277 & 384

Removing the existing unserviceable top from the Table peg and supply and fix new one as to match with the existing made of 18mm thick teak face pre-laminated particle board one side laminated particle board with 4mm thick teak wood beading duly french polish all as specified and shown on drawing. Drg No : FD - 277 & 384

Table Writing (Offr) Removing existing unserviceable top of the table writing and supply and fix new top as to match with existing made out of 18mm thick pre-laminated particle board one side laminated finish duly providing 4mm thick teak wood beading all around duly french polish complete all as specified and shown of drawing . Drg No : FD - 275

Removing the existing unserviceable leg of the table writing and supply and fix the same with new one as to match with existing made out of shisham wood complete all as specified and shown on drawing Drg No : FD - 275

Removing the existing unserviceable leg (short) of the table writing and supply and fix the same with new one as to match with existing made out of shisham wood complete all as specified and shown on drawing Drg No : FD - 275

Removing the existing unserviceable side/bottom rail of the table writing and supply and fix the same with new one as to match with existing made out of shisham wood complete all as specified and shown on drawing Drg No : FD - 275

Removing the existing unserviceable back of the table writing and supply and fix the same with new one as to match with existing made out of 6mm thick plywood commercial complete all as specified and shown on drawing Drg No : FD - 275

Removing the existing unserviceable side of the table writing and supply and fix the same with new one as to match with existing made out of 18mm thick partical board one side laminated finish complete all as specified and shown on drawing Drg No : FD - 275

Removing the existing unserviceble stiffner of the table writing and supply and fix the same with new one as to match with existing made out of shisham wood complete all as specified shown on drawing Drg No : FD - 275

Removing the existing unserviceable drawer of the table writing and supply and fix the same with new one as to match with existing made out of 18mm thick partical board one side laminated finish including provision of knob compete all as specified and shown on drawing. Note:- Knob shall be aluminium anodised (Dark Brown) chromium plated of approvd size and quality. Drg No : FD - 275

Removing the existing unserviceable cupboard complete of the table writing and supply and fix new cupboard complete made out of 18mm thick partical board one side teak face finish including 4mm teak wood beading on front side including fitting/fixtures complete all as specified and shwon on drawing. Note:- (a) Knob shall be aluminum anodized (dark brown chromium plated of approved size and quality). (b) Hinges shall be 50 mm of approved quality. Drg No : FD - 275

Teapoy Removing the existing unserviceable leg from the Teapoy and supply and fix new leg made of shisham wood to match with the existing all as specified and shown on drawing. Drg No : FD - 278 & 382

Removing the existing unserviceable top rail (long/front) from Teapoy and supply and fix new rail made of shisham wood to match with the existing all as specified and shwon on drawing. Drg No : FD - 278 & 382

Removing the existing unserviceable top rail (short/side) from Teapoy and supply and fix new rail made of shisham wood to match with the existing all as specified and shown on drawing. Drg No : FD - 278 & 382

Removing the existing unserviceable top from the Teapoy and supply and fix new one as to match with the existing made of 18mm thick teak face pre-laminated particle board one side laminated with 4mm thick teak wood beading duly french polish all as specified and shown on drawing. Drg No : FD - 278 & 382

TV Trolly Material & labour for Removing the U/S components of T V Trolly and providing new components of size and shape shown in Drg and as specified and directed, incl polishing all exposed parts of T V Trolly after repairs / replacement of parts Drg No : FD/E6/MAP/04R

Material & labour for preparation of all expose wooden surfaces by removing the uneven surfaces and then apply wooden primer and french polish Drg No : FD/E6/MAP/04R

Material & labour for Removing the u/s drawers of T V Trolly and providing new drawers on telescoping channel of size and shape shown in Drg and as specified and directed, Drg No : FD/E6/MAP/04R

Material & labour for Removing the u/s coaster wheels of T V Trolly and providing new coaster wheel of size and shape shown in Drg and as specified and directed, Drg No : FD/E6/MAP/04R

Material & labour for Removing the u/s Magnetic catch lock of T V Trolly and providing new Magnetic catch lock of size and shape shown in Drg and as specified and directed, Drg No : FD/E6/MAP/04R

Material & labour for Removing the u/s top of T V Trolly and providingnew of size and shape shown in Drg and as specified and directed, Drg No : FD/E6/MAP/04R

Material & labour for preparing old painted/polished wood & wood based materials by applying emery paper and finishing the surface by filling the putty and applying French Polish painting over a coat of pink primer to furniture as specified with one or more coat till glossy finish is achieved all as specified in particular specification and as shown on drawing and as directed by Engineer-in-Charge for the following articles of wooden furniture;- Board Display and Board notice (Drg No : FD-1041, 71M, 99M, 1042, 16 & 117)

Chair Dining JCO/OR (Drg No : FD - 279 & FD /MAP-II/05)

Chair Dining Cushioned Offr (Drg No : FD - 357 & FD/MAP-II/04)

Chair Easy JCO's/OR (Dgr No : FD - 229)

Chair Easy with Cushioned (FD - 358)

Chair Writing JCO's/OR (Drg No : FD - 280)

Sofa Set Single Seater (Drg No : FD -373, 281, 258 & FD/MAP-II/02)

Sofa Set Three Seater (Drg No : FD -373, 281, 258 & FD/MAP-II/02

Table with and without Drawers (Drg No : FD - 283, 284, 289, 293 & 94)

Table Centre (Drg No : FD - 375 & 274)

Table Dining 8/ 6/ 4 Person (Drg No : FD - 273, 291, 239 & FD/MAP-II/03)

Table Peg (Drg No : FD - 277 & 384)

Table Writing Offr (Drg No : FD - 275)

Taeapoy (Drg No : FD - 278 & 382)

Beds (all type T P ) Material & labour for removing unserviceable parts of all type T P beds and fix new one all as specified and directed on site. Drg No : T P

Board Display/ Notice various size (TP) Removing broken glass of board notice/ display of various size and supply & fixing of new glass 4 mm thick of glass size all as specified and directed on site.. Drg No : T P

Removing u/s soft board of Board Notice of supply & fixing of new soft board of various size all as specified and directed on site. Drg No : T P

Removing u/s Green Baize Cloth of Board Notice of supply & fixing of new Green Baize cloth of various size all as specified and directed on site. Drg No : T P

Book Cabinet/ Shelf 2/ 4 doors (TP) Material and labour for Removing unsv parts and fix new one. Preparation of wooden/ steel surfaces with sand/emery paper and applying french polish/ paint of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with beas wax the Book Cabinet/ Shelf 2/ 4 doors (TP) all as specified and directed on site Drg No : T P

Chair/ Sofa Recliner type Auditorium (TP) Material & labour for dismantling of non functionable chairs/ sofa recliner type from Auditorium push back chair (auditorium chair) (TP) and re-assembling the same after repairing the push back machenism to its original condition and replacement of old torn/worn out tapestry/latherite cloth of existing colour and quality with best upholstery for both seat and back all as specified and as directed. Drg No : T P

Desk Computer System and Office various size (all type T P) Material and labour for Removing unserviceable parts and fix new one to desk computer system and office. Preparation of wooden/ steel surfaces with sand/emery paper and applying french polish/ paint of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with beas wax all as specified and directed on site Drg No : T P

File Tray Wooden (TP) Material and labour for Removing unserviceable parts and fix new one to File tray wooden. Preparation of wooden surfaces with sand/emery paper and applying french polish/ paint of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with beas wax all as specified and directed on site Drg No : T P

Filling Cabinet Verticial 4 compartments/ drawers of various size (TP) Material and labour for Removing unserviceable parts and fix new one to Filling cabinet verticial 4 compartments/ drawers of various size . Preparation of wooden/ steel surfaces with sand/emery paper and applying french polish/ paint of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with beas wax all as specified and directed on site Drg No : TP

Table Centre, Cofee, Bed side, Corner Glass Top/ Marbal Top (all type TP) Removing the existing unserviceable legs from the Table centre glass/ marbal top (all type TP) and supply and fix new legs to match with the existing modal all as specified and directed on site. Drg No : TP

Removing the existing broken top glass/ marbal from the Table centre glass/ marbal top (all type TP) and supply and fix new one as to match with the existing made of all as pecified and directed on site. Drg No : TP

Removing the existing unserviceable top rail (short/side, long/front) from the Table centre glass/ marbal top (all type TP) and supply and fix new rail made of existing modal including painting/ polishing all as specified and directed on site. Drg No : TP

Table Computer various size (all type TP) Material and Labour removing unserviceable old top of table computer (all type TP) and supply and fix new top , ISI marked made out of 18 mm thick decorative pre-laminated MDFboard exterior grade of approved shade and make quality with 6 mm TW beading all around (size : various size) all as specified & directed on site. Drg No : T P

Material and Labour for removing old unserviceable key board tray from table computer (all type TP) and supply and fix new tray made up of 18 mm thick decorative pre-laminated MDFboard exterior grade of approved shade and make quality with 6 mm TW beading all around alongwith telescopic channels of best quality as per existing. Rest all as specified and as directed on site.

Material and Labour for removing old unserviceable mouse tray from table computer (all type TP) and supply and fix new tray made up of 18 mm thick decorative pre-laminated MDFboard exterior grade of approved shade and make quality with 6 mm TW beading all around alongwith telescopic channels of best quality as per existing. Rest all as specified and as directed on site.

Material and Labour for removing old unserviceable CPU Stand from table computer (all type TP) and supply and fix new CPU Stand made up of 18 mm thick decorative pre-laminated MDFboard exterior grade of approved shade and make quality with 6 mm TW beading best quality as per existing. Rest all as specified and as directed on site.

Material and Labour for removing old unserviceable PVC Shoe from table computer (all type TP) and supply and fix new one of existing size. Rest all as specified and as directed on site.

Removing the existing unserviceable cupboard complete of the table computer (all type TP) and supply and fix new cupboard complete made out of 18mm thick partical board one side teak face finish including 4mm teak wood beading on front side including fitting/fixtures complete as per per existing modal, all as specified and directed on site. Note:- (a) Knob shall be aluminum anodized (dark brown chromium plated of approved size and quality). (b) Hinges shall be 50 mm of approved quality.

Table Conference (all type TP) Material and Labour for removing old unserviceable parts (i.e. railing, top, leg & stffiner) from table conference (all type TP) and supply and fix new one of existing make/ modal, including cleaning and painting/ polishing. Rest all as specified and directed on site. Drg No : T P

Table Dining Various size (all type TP) Material and Labour for removing old unserviceable parts (i.e. railing, leg, top & stffiner)from table dining various size (all type TP) and supply and fix new one of existing make/ modal, including cleaning and painting/ polishing. Rest all as specified and directed on site. Drg No : T P

Table Office Executive type various size for Working, Writing and Multipurpose use (all type TP) Material and Labour removing unserviceable old top of table office executive type various size for working, writing and multipurpose use (all type TP) and supply and fix new top as per existing modal/ make , ISI marked exterior grade of approved existing shade and make quality of beading all around. Rest ll as specified & directed on site. Drg No : T P

Material and Labour for removing old unserviceable key board tray from table office executive type various size for working, writing and multipurpose use (all type TP) and supply and fix new tray of exterior grade of approved shade and make quality with beading all around alongwith telescopic channels of best quality as per existing modal/ make. Rest all as specified and as directed on site. Drg No : T P

Material and Labour for removing old unserviceable CPU Stand from table office executive type various size for working, writing and multipurpose use (all type TP) and supply and fix new CPU Stand of exterior grade of approved shade and make quality with beading best quality as per existing make/ modal. Rest all as specified and as directed on site. Drg No : T P

Material and Labour for removing old unserviceable PVC Shoe from table office executive type various size for working, writing and multipurpose use (all type TP) and supply and fix new one of existing size. Rest all as specified and as directed on site. Drg No : T P

Removing the existing unserviceable cupboard and locking device complete of the table office executive type various size for working, writing and multipurpose use (all type TP) and supply and fix new cupboard complete made out of 18mm thick partical board one side teak face finish including 4mm teak wood beading on front side including fitting/fixtures complete as per per existing modal, all as specified and directed on site. Note:- (a) Knob/ handle shall be aluminum anodized (dark brown chromium plated of approved size and quality). (b) Hinges shall be 50 mm of approved quality. Drg No : T P

Removing the existing unserviceable drawers and locking device of table office executive type various size for working, writing and multipurpose use (all type TP) and supply and fix new drawer as to match with the existing made of make/ modal including new knob all as specified and directed on site (including polishing /painting after replacement of parts ). Drg No : T P

Sofa 5 Seater (all type TP) Material & labour for removing the old worn/torn out cushion from sofa sets 4/5 seats and tapesty cloth from seat and back of sofa and providing new cushion of 40 density cool foam of size 560 x 530x100mm thick including provision tapesty cloth of approved shade & quality (cost of tapestry cloth shall be more than Rs. 250/- per metre) with zip on one side of cover for easy removing/closing purposes etc over a cover of lining cloth duly covered and stiched over the cushions complete all as directed. Make : sleepwell/curlon and fix of new PVC shoes for each four legs. Drg No TP

Pratik Enterprise

K K Construction Co