Bavla UGD-II under SJMMSVY : Working Survey, Soil Investigation, Design and Construction of Underground Drainage Project with 14.00 MLD Sewerage Treatment Plant Work Including Providing, Supplying, Lowering Laying, Jointing, Testing & Commissioning of Rising Main and Gravity Main Pipes for Sewer Collecting System, Construction of Sewage Pumping Station (SPS), Supplying, Erecting, Testing & Commissioning of Pumping Machineries, Road Restoration, Electrical Work Etc. With Operation & Maintenance With All Allied Works for 02-[Two] Years for UGD work and 07-[Seven] Years for STP Including 03-[Three] Years Defect Liability Period For Bavla Under Ground Drainage with Sewerage Treatment Plant, Tal: - Bavla, Dist.: Ahmedabad, Gujarat” Under SJMMSVY

SUMMARY (SCHEDULE-B)

Schedule No. Name of work

Schedule-B-1 SEWER COLLECTING SYSTEM

Schedule-B-2 HOUSE CONNECTION

Schedule-B-3 RISING MAIN NETWORK

Schedule-B-4 ELECTRO-MECHNAICAL WORKS AT VARIOUS PUMPING STATION

Schedule-B-5 PUMPING STATION AT PAKSHI BHAVAN

Schedule-B-6 SCREEN CHAMBER AT PAKSHI BHAVAN PS

Schedule-B-7 PUMP HOUSE

Schedule-B-8 CONSTRUCTION OF CC ROAD

Schedule-B-9 TEMPORARY ROAD RESTORATION AND PAVER BLOCK/KOTA STONE

Schedule-B-10 STP (14 MLD)

Total of Schedule-B

Schedule-C-1 02-YEARS OF OPERATION AND MAINTENANCE

Schedule-C-2 07-YEARS OF OPERATION AND MAINTENANCE FOR STP

Total Project Cost In Rs.

I/We am/ are willing to carry out the work at ………………………………… above/ below /at par percent

(should be written in figures and words),

the estimated rates mentioned above. Now amount of my/our tender works out as under.

* Estimated Amount * Estimated Amount

Put To Tender Put To Tender

Rupees In Word………………………………………………. Rupees In Word……………………………………………….

SEWER COLLECTING SYSTEM

Item Description Unit Qty Rate Amount

Providing and supplying lSl Standard R.C.C. pipes in standard lengths of following class and

diameter suitable for either collar joints or rubber ring joints including all taxes, insurance,

transportation, freight charges, octroi, inspection charges, loading, unloading, conveyance

to departmental stores, stacking etc. complete. for following dia. Note : One collar should

be supplied with each full length plain ended RCC pipe, cost included in rates below. One

rubber ring should be supplied with each full length socketed pipe, cost included in rates

below. Class NP3 Test Pressure, 0.7 Kg / Sq.m. - 250 mm Pipe Dia.

2 300 mm Pipe Dia. Rmt 3,118.00 755.00

3 350 mm Pipe Dia. Rmt 122.00 879.00

4 400 mm Pipe Dia. Rmt 143.00 1,150.00

5 450 mm Pipe Dia. Rmt 1,483.00 1,361.00

6 600 mm Pipe Dia. Rmt 572.00 1,946.00

Frame & Cover Manufacture, supply & Delivery at store or at site of work precast FRC

ROUND FRAME & ROUND COVER - MSB Frame & cover suitable to drainage M.H. and as per

type design & Drawing including cost of reinforcement M.S.

Angles or Flat, curing mold work etc.

Clear Opening : 560 mm dia

7 Cover Size : 710 mm dia No. 491.00 1,850.00

Cover Thickness : 100 mm

Frame Size : 865 mm dia

Frame Thickness : 175 mm

> Frame & Cover

Providing and constructing Sewer manholes, scraper manholes and unit house connection

chamber, as per the type design in brick masonary in C. M. 1:3 and outside plastering in C.

M. 1:3 necessary coping in R.C.C.M. 200 fixing C. I. steps and fixing manhole frame and

covers (But excluding supply of manhole frame and covers) over manholes and house

connection chambers and fixing Manhole covers (but excluding supplying of manhole

8 covers) over scraper manhole etc. complete, providing and fixing safety chain wherever No. 239.00 14,005.85

necessary as per the stipulations in the type desing complete (excl. excavation).

Manhole type "A" Circular type having inside diameter of 1200 mm for depth up to 1.5 m

depth (for 150 mm to 500 mm dia sewer) Manhole type "A" as above but up to 1.0 M depth.

9 Extra depth beyond 1 .0 M but up to 1 .5 M depth for "A" type manhole above. Rmt 44.70 7,622.20

Manhole type "B" circular type having inside diameter of minimum 1500 mm and for depth

10 from 1.5 M to 4.0 M (for 150 mm to 600 mm dia sewers) Manhole type "B" as above but up No. 152.00 24,283.40

to 1.5 M depth.

11 Extra depth beyond 1 .5 M but up to 4.0 M depth for type B manhole above. Rmt 109.20 14,159.95

SEWER COLLECTING SYSTEM

Item Description Unit Qty Rate Amount

Providing, fixing and constructing of pre-cast RCC M-40 grade circular manholes with

internal dia 1.2m and up to specified depth having pre-cast RCC M-40 grade circular

manhole cover frame (ID 0.56m, OD 0.92m), conical piece (top ID 0.56m, bottom ID

1.2m,vertical height 1.005m, wall thickness 125mm), and circular rings of required heights

(ID 1.2m, height 150/225/300/600/900mm, wall thickness 125mm) below conical piece as

per required depth of manhole and having steel reinforcement in Conical piece @ not less

than 80 kg per cum of concrete, including cast-in-situ PCC M-10 grade (1:3:6) foundation of

1.825m dia and 150mm thickness, PCC M15 grade circular wall ID 1.125m, wall thickness

200mm, height equal to ID of sewer pipe + one wall thickness of pipe + 50 mm (to flush the

manhole frame with road top, height of wall can be increased but not more than 100mm),

PCC M15 grade benching and channel portion and up to top level of sewer pipe etc

complete with curing compaction and form work, supplying and fixing heavy duty SFRC

manhole cover as per IS 12592 (Part I and II), supplying and fixing plastic encapsulated

12 CI/MS footsteps / SFRC footsteps, including cost of shuttering, steel reinforcement, testing No. 559.00 17,800.00

for water tightness etc complete in all respect as per drawing, as per specification and the

direction of the Engineer. Note:- Excavation of earth work and road cutting for manhole will

be measured and paid separately.

Pre-cast RCC M-40 grade circular manhole conical piece with inbuilt cover and frame (height

1.005), cast-in-situ PCC M-10 grade foundation, PCC M15 grade circular wall ID 1.125m, wall

thickness 200mm, wall height equal to ID of sewer pipe + one wall thickness of pipe +

mm, PCC M15 grade benching and channel portion. Depth of manhole shall be measured

from top of manhole cover upto lowest invert of pipe. (Depth includes in the item = height

of Conical piece + ID of Sewer pipe + 1 Wall thickness of pipe + increased height of wall (if

Providing and fixing pre-cast RCC M-40 grade circular ring of ID 1.2m, wall thickness 125mm,

13 height 150/225/300/600/900mm for constructing extra depth of manhole beyond depth Rmt 104.30 7,810.00

mentioned in item no-12 as per drawing.

Providing, fixing and constructing of pre-cast RCC M-40 grade circular manholes with

internal dia 1.5m and up to specified depth having pre-cast RCC M-40 grade circular

manhole cover frame (ID 0.56m, OD 0.92m), conical piece (top ID 0.56m, bottom ID 1.5m,

vertical height 1.305m, wall thickness 125mm), and circular rings of required heights (ID

1.5m, height 150/225/300/600/900/1200 mm, wall thickness 125mm) below conical piece

as per required depth of manhole and having steel reinforcement in conical piece @ not less

than 80 kg per cum of concrete, including cast-in-situ PCC M-10 grade (1:3:6) foundation of

2.125m dia and 150mm thickness, PCC M15 grade circular wall ID 1.425 m, wall thickness

200mm, height equal to ID of sewer pipe + one wall thickness of pipe + 50 mm (to flush the

manhole frame with road top, height of wall can be increased but not more than 100mm),

PCC M15 grade benching and channel portion and up to top level of sewer pipe etc

complete with curing compaction and form work, supplying and fixing heavy duty SFRC

manhole cover as per IS 12592 (Part I and II), supplying and fixing plastic encapsulated

14 CI/MS footsteps / SFRC footsteps, including cost of shuttering, steel reinforcement, testing No. 358.00 23,900.00

for water tightness etc complete in all respect as per drawing, as per specification and the

direction of the Engineer. Note:- Excavation of earth work and road cutting for manhole will

be measured and paid separately.

Pre-cast RCC M-40 grade circular manhole conical piece with inbuilt cover and frame (height

1.305), cast-in-situ PCC M-10 grade foundation, PCC M15 grade circular wall ID 1.425m, wall

thickness 200mm, wall height equal to ID of sewer pipe + one wall thickness of pipe +

mm, PCC M15 grade benching and channel portion. Depth of manhole shall be measured

from top of manhole cover upto lowest invert of pipe. (Depth includes in the item = height

of Conical piece + ID of Sewer pipe + 1 Wall thickness of pipe + increased height of wall (if

Providing and fixing pre-cast RCC M-40 grade circular ring of ID 1.5m, wall thickness 125mm,

15 height 150/225/300/600/900/1200mm for constructing extra depth of manhole beyond Rmt 442.80 9,220.00

depth mentioned in item no-14 as per drawing.

SEWER COLLECTING SYSTEM

Item Description Unit Qty Rate Amount

Providing and cast in situ C.C. in grade M-30 proportions of ingredients as per mix design by

weigh batching using granite, quartzite trap metal of size 12 mm to 20 mm and or 6 mm to

12 mm including scaffolding centering formwork, needle vibrated consolidation, curing and

hydraulic testing etc. complete (excluding cost of reinforcement) with centering and

shutteringldeshuttering etc. comp. up to 6 meter height ldepth Av. G.L.for all water

retaining structures Flat bottom slab/floor slab/slab with shuttering

For Inspection Chamber

17 Vertical Wall Above 15 cm and up to 20 cm Cu.M. 431.20 9,673.80

Supplying, cutting, bending, binding, and placing in position steel as per plan and design and

as per ISS 2502 including cost of steel and binding wire for reservior/structures only

18 including lift up to 6 mt. height or depth below G. L. for all diameters. DO - Thermo MT 45.76 84,189.20

Mechanically Treated (TMT) Bars Fe-415 Grade for all diameters.

Providing and fixing intermediate vertically placed removable cast iron jail (minimum

opening 50 mm) fixed in RCC grooves (75 mm bearing on all sides) in the drain walls for

arresting floating debris placed at 60 m c/c in straight reach and at junctions and bends

provided with RCC Cover for cleaning.

Providing and fixing cast iron steps of size 500mm x 150mm x 22.5mm and painting with

two coats of Anti-corrosive paint etc. complete.

Providmg and constructing vertical drop arrangement of 0.6 m and more height as required

including providing and jointing special such as double T. Bend required stoneware pipe

21 fixed in m-100 C. C. at required level as type design culling. jointing and filleting as per No. 152.00 2,477.10

specification etc. complete.

Vertical drop arrangement as above up to 0.6 m height.

22 Extra over item No.4 above for additional drop beyond 0.6 m Rmt 110.00 2,214.90

Excavation for pipe line trenches for water supply, sewerage line, manhole etc. all with

shoring and struting if required as per required gradient and line including safety provisions

using site rails and stacking excavated stuff including up to all required lead cleaning the site

23 etc. complete for all lifts and strata as specified. Cu.M. 40,141.10 102.35

0.0 m to 1.5 m depth

In all sorts of soil & soft murrum

24 In hard murrum, boulders incl. macadam road Cu.M. 9,752.70 155.25

25 In soft rock and/or masonry in CM or L M or Lime Concrete. Cu.M. 7,234.35 187.45

In hard rock and I or in C. C. 1:2:4 or RCC with blasting, breaking, chiseling, or by

chiseling/breaking only.

27 1.50 m to 3.0 m depth In all sorts of soil & soft murrum Cu.M. 6,923.82 112.70

28 In hard murrum, boulders incl. macadam road Cu.M. 1,819.94 170.20

29 In soft rock and/or masonry in CM or L M or Lime Concrete. Cu.M. 1,641.97 205.85

In hard rock and I or in C. C. 1:2:4 or RCC with blasting, breaking, chiseling, or by

chiseling/breaking only.

31 3.00 m to 4.50 m depth In all sorts of soil & soft murrum Cu.M. 589.00 118.45

32 In hard murrum, boulders incl. macadam road Cu.M. 148.00 177.10

33 In soft rock and/or masonry in CM or L M or Lime Concrete. Cu.M. 148.00 215.05

In hard rock and I or in C. C. 1:2:4 or RCC with blasting, breaking, chiseling, or by

chiseling/breaking only.

Dewatering In all sorts of soil and soft murrum, hard Murrum and boulders, Soft Rock, Hard

35 Rock, upto 1.5 mt. depth from G.L. Cu.M. 9,758.00 31.05

1.50mt to 3.00 mt depth

Lowering , Laying and jointing R.C.C. pipes in C.M.1:1 1/2 of following diameter in proper

position, grade and alignment as directed by Engineer-in-charge including conveyance from

37 store to site of work,labour giving hydraulic testing as per ISI Code. Rmt 17,207.00 111.55

250 mm Pipe Dia

38 300 mm Pipe Dia. Rmt 3,118.00 136.85

39 350 mm Pipe Dia. Rmt 122.00 152.95

40 400 mm Pipe Dia. Rmt 143.00 178.25

41 450 mm Pipe Dia. Rmt 1,483.00 196.65

42 600 mm Pipe Dia. Rmt 572.00 262.20

Refilling the pipeline trenches incl. ramming, watering, consolidating desposal of surplus

43 stuff as directed within a radius of 3 km. Cu.M. 50,970.25 25.30

SEWER COLLECTING SYSTEM

Item Description Unit Qty Rate Amount

Providing and casting in situ mass cement concrete in Gradde M-10(approx correspondence

to propotion 1:3:6) using granite quartizite trap metal of size 12mm to 25mm incl.

consolidation curing etc. complete. (For Pipe Bedding) With Form Work

Add for restoration of infrastructures like Kharkuwa. Electncal Line, Telephone cables all

45 types. water lines. gas line. septic tanks. etc. Kharkuwa Repairing No. 125.00 2,103.35

Providing bedding incl. ramming, watering, levelling, consolidating etc. Complete as per

47 standard and instruction of enqineer incharqe. (As above with required quality Sand brought Cu.M. 3,282.00 378.35

from outside inclduinq all lead)

Suppliying, spreading, and consolidation by tamping of graded Hand broken stone

48 aggregate 40 mm to 63 mm size. Including all lead and lift. For Pipe Bedding Cu.M. 1,639.00 806.00

Loosen. de-silt and thoroughly clean and remove debris and objects such as boulders, bricks

elc. bacteriological slimes, roots, encrustations, grease, carbonated deposits, etc from the

49 sewer line including disposal of silt I debris I malba I ObJeCts etc. by super suction machine. Rmt 4,900.00 999.35

300mm dia.& below

50 350mm dia. Sewer line Rmt 2,100.00 1,248.90

Removing of existing pipeline incl. removal of specials, valves jointing material including

carting and stacking of removed material from site of work to the department store as

directed excl. excavation and refilling.

100 mm Dia D .I./ C. I. S. & S. Spun Pipes

52 150 mm Dia D.I./ C. I. S. & S. Spun Pipes Rmt 95.00 35.65

53 200 mm Dia D.I./ C. I. S. & S. Spun Pipes Rmt 75.00 48.30

54 250 mm Dia D.I./ C. I. S. & S. Spun Pipes Rmt 60.00 64.40

55 300 mm Dia D.I./ C. I. S. & S. Spun Pipes Rmt 45.00 80.50

56 300 mm Dia RCC/ Pre-stressed concrete Pipes Rmt 1,300.00 70.15

57 350 mm Dia RCC/ Pre-stressed concrete Pipes Rmt 670.00 80.50

58 90 mm Dia P. V. C./ HDPEI GRP Pipes Rmt 1,490.00 5.75

59 110 mm Dia P. V. C./ HDPEI GRP Pipes Rmt 870.00 5.75

60 140 mm Dia P. V. C./ HDPEI GRP Pipes Rmt 565.00 5.75

61 160 mm Dia P. V. C./ HDPEI GRP Pipes Rmt 340.00 6.90

62 180 mm Dia P. V. C./ HDPEI GRP Pipes Rmt 205.00 9.20

63 200 mm Dia P. V. C./ HDPEI GRP Pipes Rmt 98.00 11.50

Labour charges for repairing of leakage in Cl/DI pipeline for following diameter at different

places including necessary excavation manually or by machinery, removing mud,

dewatering, cleaning of pipe and leakage portion and repairing by Inserting lead wool

64 including tools required for inserting lead wool, hiring charges of excavators, Hydra/Crane. No. 260.00 1,135.05

dewatenng set, fuel. operator, cost of lead wool etc complete (including all material but

excluding cost of pipe)

100 mm Dia D .I./ C. I. S. & S. Spun Pipes

65 150 mm Dia D.I./ C. I. S. & S. Spun Pipes No. 95.00 1,537.55

66 200 mm Dia D.I./ C. I. S. & S. Spun Pipes No. 75.00 1,909.00

67 250 mm Dia D.I./ C. I. S. & S. Spun Pipes No. 60.00 2,794.50

68 300 mm Dia D.I./ C. I. S. & S. Spun Pipes No. 45.00 3,119.95

Labour charges for repairing of leakage in PVC pipeline of foiling diameter at different places

including necessary excavation manually or by mechanise excavation. dewatering removing

of mud, cleaning of pipe and leakage portion, cutting the pipeline & removing piece of pipe

69 from trench with inclussive of mechanical devices JCB. Hydra/Crain if necessary & labours No. 1,490.00 963.70

required with providing material such couplers. solution etc. comp. (incl. all material but

Exclu. cost of pipe) 90 mm Dia P. V. C.

Total Amount (In Rs.) =

Total Amount (In Rs.) =

HOUSE CONNECTION

Item Description Unit Qty Rate Amount

Providing and supplying of Class SN8 Structured Wall

polyethelene Piping systems (Pipe with online/offline

coupler and elastomeric sealing ring) with non-smooth

External Annular Corrugated and Smooth Internal

Surfaces (Double Wall) for non pressure underground

Sewerage & Drainage application as per EN:13476-3

including all local and central taxes, transportation,

freight charges, octroi, inspection charges. loading,

unloading, conveyance to the departmental stores etc.

complele.(ID Dia)

Corrugated DWC HDPE pipes (non-pressure pipes)

Manufacture, supply and delivery of Chemical fabricated

RCC Precast chambers (For House Connection) with top

cover as per specification and drawing for sizes as

mentioned below. The delivery of chambers with clamps,

nuts. bolts and locking arrangement (without lock) is to

be made to sites any where in Gujarat. The rates includes

all taxes. loading, carting, unloading, stacking, including

all taxes. 60 x 60 x 90 cm deep (Suitable to 60 to 300 mm

House Connection Chamber of Size 0.60 x 0.60 x

Excavation for pipe line trenches incl. all safety provisions

using site rails and stacking excavated stuff up to a lead of

90 mts. cleaning the site etc. complete for lifts and strata

0.0 m to 1.5 m depth

In all sorts of soil & soft murrum

Lowering, laying and jointing of class SN 8 structured wall

( External Annular Corrugated & Smooth Internal surface)

Polyethylene Piping and fittings with the help of coupler (

on line I off line ) attached with one end of pipes, sliding

over the elastomeric sealing rubber ring placed on the

specified valley of the corrugation at the spigot end,

lowering the same into the trench at all level, laying on

the lower bedding (constructed at bottom of trenches) at

prescribed gradient, depth & alignment ,testing the water

tightness of the joints, ensuring the continuity tests of

specified pipe segments etc. complete as per

drawing,specifications & detailed engineering, including

carriage of pipes & fittings from site stacks to the place of

laying etc. as per direction of Engineer-in-charge. 100mm

Refilling the pipeline trenches including ramming,

watering, consolidating disposal of surplus stuff as

directed within a radius of 3 km

Total Amount (In Rs.) =

Total Amount (In Rs.) =

Rising Main Network

Item Description Unit Qty Rate Amount

Providing and supplying D. I. K-9 grade pipes for following nominal bore diameter with

internal cement mortar lining including all taxes, insurance, transportation, freight

charges, octroi, inspection charges. loading, unloading, conveyance to departmental

stores, stacking etc. complete. For sewerage project cement mortor lining shall be

with sulphate resistance cement

Manufacture, Supply & Delivery of Ductile Iron Flange socket spigot bends, tees,

reducers or any other specials as per BS-EN-545/1995 Class-A series K12 suitable for

use with D.I. Pipes manufactured as per IS:8329/1994delivery of specials is to be made

to site of works any where in Gujarat including all taxes, loading, unloading, carting,

stacking, insurance, inspection charges, octroi etc. complete. Specials 80 to 300mm

7 Specials Above 350mm dia Kg. 4,421.00 151.00

Providing and supplying ISI mark CI D/F Sluice Valves/ Scour Valve as per IS:14846

(Latest Edition) of following class and diameter including all taxes, insurance,

transportation, freight charges, octroi, inspection charges, loading, unloading,

conveyance to departmental stores, stacking etc. complete. A9) P.N.1.6 with hand

wheel/cap operated (PD type short body)

Supply, installation, testing & commissioning of flange ends Expansion Bellow as per

EJMA standards of overall length of minimum 300 mm, designed for 15 mm axial

compression and 5 mm axial extension with tie rods etc. of following MOC & pressure

MOC: Bellows: SA 240 Gr. 304; Internal Sleeve: SA 240 Gr. 304; Weldends: IS 2062 Gr.

B; Flanges: IS 2062 Gr. B (Drilling as per IS 1538 /IS 6392 ) & Limit Rods & Nuts: CS - IS

Size- NB 200mm, Width- 300mm

11 Size- 300mm, Width- 300mm Nos. 6.00 10,800.00

Providing and supplying C. I Air valves of approved make & quality of following class

and diameter including all taxes, insurance, transportation, freight charges, octroi,

inspection charges, loading, unloading, conveyance to departmental stores, stacking

etc. complete. air valve Double Acting (DS2) type 50mm dia

Erection of airvalve riser by installing new M.S pipe of 6mm thick and 3.2mt length

with necessary fittings such as flange of appropriate size,nut bolts and embeded the

pipe in RCC M: 15 with offset of 10 cm around pipe with necessary steel etc complete

Dia of Air Valve 50mm& MS Pipe

16 Dia of Air Valve 80mm& MS Pipe Rmt 3.00 5,002.50

17 Dia of Air Valve 100mm& MS Pipe Rmt 13.00 6,374.45

Excavation for pipe line trenches for water supply, sewerage line, manhole etc. all

with shoring and struting if required as per required gradient and line including safety

provisions using site rails and stacking excavated stuff including up to all required lead

cleaning the site etc. complete for all lifts and strata as specified.

0.0 to 1.5 mt depth. In all sorts of soil and soft murrum

19 In hard murrum, boulders incl. macadam road. Cum 2,652.38 155.25

20 In soft rock and/or masonary in CM or LM or Lime Concrete. Cum 1,591.43 187.45

In hard rock and/or in C.C. 1:2:4 or R.C.C. with blasting and chiselling or by chiselling

22 1.5 to 3.0 mt depth. In all sorts of soil and soft murrum Cum 222.90 112.70

23 In hard murrum, boulders incl. macadam road. Cum 111.45 170.20

24 In soft rock and/or masonary in CM or LM or Lime Concrete. Cum 66.87 205.85

Rising Main Network

Item Description Unit Qty Rate Amount

In hard rock and/or in C.C. 1:2:4 or R.C.C. with blasting and chiselling or by

chiselling/breaking only.

Lowering, laying and jointing C. I. S & S Spun pipes suitable for Tyton joints / Mortar

lined D. I. Pipes of various classes with CI / MS specials of following diameters in

26 proper position, grade and alignment as directed by Engineer-in-charge including Rmt 680.00 113.85

hydraulictesting etc. complete

Lowering, laying and jointing in position following C. I. / D/F Reflux valves, Butterfly

valves, Sluice valves including cost of all labour, jointing material, including nut bolts

and giving satisfactory hydraulic testing, etc. complete. 200mm dia

Construction of valves chambers in brick or bela stone masonry, locally available in C.

M. 1:6. Foundation concrete 150 mm thick in C. C. 1:4:8 of trap metal size 25 mm to

40 mm thick, inside cement plaster in C. M. 1:3 and cement pointing outside in C. M.

1:3 and top cover of precast RCC slab 100 mm thick (with key hole in two parts, each

with handles or MS Bar etc. complete as given size) Upto 1 Mt. depth from G. L. to

pipe invert level incl. complete civil works but excl. cost of excavation and refilling,

with cast in situ RCC slab in one single piece with fixing of CI-MH Frame and cover

(excl. cost of CI-MH Frame and cover) with 23 mm thick brick masonry wall in C.M.1:6

Valve chamber of Size

Size of chamber 0.90 m x 0.90 m and 1.0 mt. deep for Air Valve

With precast slab in two parts 15 cm

34 For 1 mt extra Depth Rmt 4.00 5,150.85

Providing and casting in situ C.C. in grade M-20 (proportions as per mix design or as

per table-9 of IS456 2000 in masses by weigh batching ) using granite, quartzite trap

metal of size 6 mm to 20 mm for RCC work, including scaffolding centering, formwork,

needle vibrated consolidation, curing complete up to 6 meter depth or height

(excluding cost of reinforcement and neat finishing) with centering and

shuttering/deshuttering etc. complete for structure other than water retaining (Below

G.L). Footing for column or foundation (with form work) Thrust Block

Supplying, cutting, bending, binding, and placing in position steel as per plan and

design and as per ISS 2502 including cost of steel and binding wire for

36 reservior/structures only including lift up to 6 mt. height or depth below G. L. for all MT 33.80 84,189.20

diameters. DO - Thermo Mechanically Treated (TMT) Bars Fe-415 Grade for all

Providing bedding incl. ramming, watering, levelling, consolidating etc. Complete as

37 per standard and instruction of engineer incharge As above with Murrum brought Cum 730.61 202.40

from outside inclduing all lead

Refilling the pipeline trenches including ramming, watering, consolidation, disposal of

38 surplus stuff as directed within a radius of 3 KM Cum 9,476.00 25.30

Drilling of Horizontal bore hole for water main pipeline under the Railway / Road

tracks in all strata with required length including fixing of M.S.(or as specified by

Railway / Road authority) casing pipe of suitable size and Thickness. Rate includes the

cost of Drilling of bore hole , Casing pipe & welding pushing etc complete but

excluding the cost of water main, valves and other items. Entire work should be as per

Approved Drawing and as per instruction of Railway / Road authority for Following

diameter of Bore hole. for MS pipe Horizontal Drilling-300:& MS Casing Pipe-250

40 Horizontal Drilling-600:& MS Casing Pipe-500 thick:8 Rmt 45.00 9,166.00

Total Amount (In Rs.) =

Total Amount (In Rs.) =

Electro-Mechnaical works at Various Pumping Station

Item Description Unit Qty Rate Amount

Sewage Non Clog, End Suction Type Vertical Centrifugal Pump :-

Supply, installation, testing & commissioning of non clog seweage vertically mounted end suction type vertical centrifugal

pump set of required capapcity & head with suitable TEFC squirrel cage foot mounted induction motor (with minimum IE-3

efficiency class), working on three phase 50 Hz ± 3%, 415 V ± 10% AC supply, 1500 RPM synchronous speed including suitable

1 provision of extended shaft of 2 meters length to couple with motor along with base frame, coupling with guard, foundation Set. 2.00 1,12,885.00

bolts, strainer etc. complete set as per relevant IS & following M.O.C: Casing: 1.5 to 2% Ni. CI; Impeller & wearing ring: SS /

CF8M, Shaft with sleeve: SS & Base frame: CI; Guide Pipe: SS.

PUMP Required (For 1 DWF) :- 30 HP (1 Working AND 1 Stand By)

2 PUMP Required (For 2 DWF) :- 60 HP (1 Working AND 1 Stand By) Set. 2.00 1,76,331.00

3 PUMP Required (For 1 DWF) :- 100 HP (1 Working AND 1 Stand By) Set. 2.00 2,67,794.00

4 PUMP Required (For 2 DWF) :- 170 HP (1 Working AND 1 Stand By) Set. 2.00 6,59,184.00

5 PUMP Required (For 1 DWF) :- 10 HP (1 Working AND 1 Stand By) Set. 2.00 87,342.00

6 PUMP Required (For 2 DWF) :- 20 HP (1 Working AND 1 Stand By) Set. 2.00 87,342.00

Supply, installation, testing & commissioning of horizontal split casing centrifugal pump motor set of specified duty

parameters & guaranteed efficiency of following MOC with specified capacity, horizontal foot mounted TEFC squirrel cage

induction motor (with minimum IE-3 efficiency class), working on three phase AC supply with 50 Hz ± 3%, 415 V ± 10%, rated

7 speed 1450 RPM along with fabricated MS base frame, coupling, coupling guard, foundation bolts etc. as per relevant IS. Set. 2.00 2,42,624.00

M.O.C.: Impeller & Wearing Rings: Bronze LTB II IS: 318, Casing: CI FG 260 IS: 210 , Shaft: SS 410, Shaft Sleeve: Bronze LTB II IS:

318 or SS 410, Mechanical Seal (Above 30 kW), Base Frame: MS.

PUMP Required (For 1 DWF) :- 34 KW (1 Working AND 1 Stand By)

8 PUMP Required (For 2 DWF) :- 62 KW (1 Working AND 1 Stand By) Set. 2.00 4,42,432.00

PRESSURE GAUGE:

Design, Supply, Installation, Testing, Commissioning of Bourdon Type Pressure Gauge, ±1% accuracy, Direct

bottom 1/2" NPT (M) process connection, IP 67, Glycerine filled, SS304 Case with Bayonet Type Bezel, SS316 L

9 Bourdon Tube, SS 316 Movement material, Aluminium dial with black graduation on white background, Micro No. 16.00 1,029.00

Zero adjustable pointer, neoprene gasket, Blow out disc, shatter proof glass, SS tag plate etc as per IS

Range : 0 - 6 kg / sq.cm.

FLOW METER: Full Bore Electromagnetic Flow Meter- Inbuilt Battery Power operated

Design, Supply, Installation, Testing, Commissioning of Full Bore Electromagnetic flow meter with factory

calibration, Inbuilt Battery Power Operated, flanged connection, Flow sensor, Indicator, transmitter and

totaliser with all accessories viz. surge arrestor, associated cables, cabinets, hardwares, etc complete as per

following specifications:

I :- Flow Meter/ Sensor:

DC pulsed type, IP 68 Protection, Flanged process connection as per IS 1538 or equivalent standard, SS304/

Metallic Alloy Flow Tube, SS316/ SS 316 L/ Hastelloy Sensor, SS316/ Hastelloy Grounding Ring/ Inbuilt

Grounding Electrode, Neoprene/Polyurethane/ Hard Rubber/ Rilsan lining, SS304/ Die Cast Aluminium/

Carbon steel with Anticorrosive Paint Coil Housing with Junction Box, CS flanges.

10 II :- Flow Transmitter/ Converter ( Remote Field Mounted): No. 1.00 2,10,688.00

Microprocessor based, Modular design, 2 line LCD for indication of actual flow rate, forward, reverse, sum

totaliser display, ±0.5% accuracy at 0.3 to 4 m/sec velocity, one scalable pulse/ one status, one Modbus output,

one GPRS/ GSM output, IP 67 protection, Die cast aluminium/ polycarbonate/ SS316 with Anticorrosive Paint/

PU finish with glass window enclosure, Inbuilt EEPROM and Data Logger, 20 meters cable length for sensor to

transmitter communication, Minimum 5 years battery lifetime, 3.6 VDC Non

Rechargeable Lithium-thionyl chloride/ Ni-Cd high power batteries, Hourly Basis Worldwide transmission of

measured data and events via e‐mail and SMS by integrated GSM/GPRS modem, Reliable data storage facility

through integrated SD card etc alongwith wall mounted/ stand mounted cabinet.

Full Bore Electromagnetic Flow Meter (Inbuilt Battery Power Operated)- PN

300 mm Nominal Bore (At header)

11 400 mm Nominal Bore (At header) No. 1.00 2,78,633.00

12 450 mm Nominal Bore (At header) No. 1.00 2,94,706.00

13 200 mm Nominal Bore (At header) No. 1.00 1,43,211.00

EXPANSION BELLOWS:

Supply, installation, testing & commissioning of flange ends Expansion Bellow as per EJMA standards of overall

length of minimum 300 mm, designed for 15 mm axial compression and 5 mm axial extension with tie rods etc.

14 of following MOC & pressure ratings. No. 8.00 10,200.00

MOC: Bellows: SA 240 Gr. 304; Internal Sleeve: SA 240 Gr. 304; Weldends: IS 2062 Gr. B; Flanges: IS 2062 Gr. B

(Drilling as per IS 1538 / IS 6392 ) & Limit Rods & Nuts: CS - IS

Ultrasonic Type Level Transmitter with Integral Display :

Design, Supply, Installation, Testing and Commissioning of NOn Contact Ultrasonic Type Level Transmitter

Sensor with Head Mounted Transmitter:

The sensor should be non contact type, field mounting type, housing shall have minimum IP65 protection, PP/

17 PVC Sensor MOC, Microprocessor based indicator with LED / LCD digital display,panel/ wall mounting type, No. 4.00 59,723.00

power supply shall be 110- 240 Vac or 15 to 36 Vdc, 50 Hz ± 10 %.

Accesories: Mounting bracket, nut, bolts etc as per system requirement and Hook up diagram of the

Level Transmitter shall be suitable for following Range.

iii) 0 to 15 Meter

C.I. D/F VALVES: SLUICE VALVE:

Providing and supplying ISI mark CI D/F Sluice Valves as per IS:14846 (Latest Edition) of following class and

diameter including all taxes, insurance, transportation, freight charges, octroi, inspection charges, loading,

unloading, conveyance to departmental stores, stacking etc. complete..

PN-1.6 With hand wheel /cap operated (PD type short body) Size:300 mm (delivery side)

19 Size: 200 mm (delivery side) No. 4.00 10,295.00

Electro-Mechnaical works at Various Pumping Station

Item Description Unit Qty Rate Amount

Lowering, laying and jointing in position following C. I. / D/F Reflux valves, Butterfly

20 valves, Sluice valves and Air valves including cost of all labour, jointing material, No. 12.00 1,312.15

including nut bolts and giving satisfactory hydraulic testing, etc. complete Size 300 mm

Supply, installation, painting, testing & commissioning of non-slam, spring action, flanged Dual plate check

22 valve confirming to API 594 & 598 PN 1.0 with C.I. body, spring steel spring, S.S. seating with all carbon steel No. 12.00 35,045.00

hardware’s and other accessories as per data sheet and specification.

Size: 300 mm NB-Manually operated (on delivery side)

23 Size: 200 mm NB-Manually operated (on delivery side) No. 4.00 15,929.00

Lowering, laying and jointing in position following C. I. / D/F Reflux valves, Butterfly valves, Sluice valves and

Air valves including cost of all labour, jointing material, including nut bolts and giving satisfactory hydraulic

24 testing, etc. complete. Sluice valves, Butterfly Valves, Reflux Valves No. 12.00 1,312.15

Size: 300 mm NB-Manually operated (on delivery side)

25 Size: 200 mm NB-Manually operated (on delivery side) No. 4.00 853.30

Providing and supplying C. I. Air valves of approved make & quality of following class and diameter including

26 all taxes, insurance, transportation, freight charges, octroi, inspection charges, loading, unloading, No. 1.00 3,660.00

conveyance to departmental stores, stacking etc. complete.

Air valves double acting (DS 2) Size: 80 mm NB - PN

Lowering, laying and jointing in position following C. I. / D/F Reflux valves, Butterfly

30 valves, Sluice valves and Air valves including cost of all labour, jointing material, No. 1.00 472.65

including nut bolts and giving satisfactory hydraulic testing, etc. complete Size 80 mm

Manufacture, Supply & Delivery of Electric Resistance Welded (Up to 400mm)/Submerged Arc Welded(Above

400mm) M.S.Pipe having beveled ends plate or coil conforming to IS-3589-2001 or its latest revision/

34 ammendment for following thickness outside diameter at site anywhere in Gujarat State including all taxes, Rmt 150.00 3,106.00

insurance, transportation, freight charges, octroi, inspection charges, loading, unloading conveyance to

Departmental stores, stacking etc. all complete.

Size:323.9 mm NB-5.6 mm thick (on Delivery side)-As per site requirement

35 Size: 219.1 mm NB-6.3 mm thick (on Delivery side)-As per site requirement Rmt 50.00 2,337.00

Lowering, laying, Jointing & welding in position to correct line & level M.S. Pipe with outer gunniting & inside

lining/Epoxy painting on pedestal or chairs upon prepared formation or prepared bedding in trenches the

36 rates include conveyance from store to site of work loading, unloading, joint plastering, hydrotesting Rmt 150.00 341.55

Size:323.9 mm NB-5.6 mm thick

37 Size: 219.1 mm NB-6.3 mm thick Rmt 50.00 248.40

Providing, S.I.T.C of Structure Steel at site of work with freight, loading, unloading carting, etc. including all

taxes and duties complete such as joints, channels, angles, Iron Rails, ISA/ISMC/ISMB/MS flat, Plates,

Chequered plates (below 10mm thickness) etc. required for support structure of Elecrto- Mechanical

equipments etc. for support on floor / wall / beam / brackets etc. as per tender and IS.

Supplying and erecting, commissioning and testing of Diesel Generating set confirming to IS:4722:1968 & BS:5514 having

continuous rating ,3phase, 415 volts, 50 cycles A.C. supply comprising of a totally enclosed air/water cooled diesel

engine with multi-cylinders developing suitable BHP not lessthan following capacity at 1500 RPM with 10% overload for

one hour in 24 hours with standard accessories like fly wheel, lubricating oil cooler, "A" class governor, heavy duty fuel

wheel and lubricating oil filter, oil bath air filler, lubricating oil pressure gauge, end exhaust manifold, standard set of

tools with adjustable spanners, screw drivers, cylinder head to cover, joint cylinder head to exhaust, element lube oil

filter, 12/24 volts electric starting equipment complete with standard heavy duty battery, dynamo, cut-outs, ammeter,

necessary wiring, pressure gauge, starter etc and heavy duty Residential type exhaust silencer (WithDEF

System) and vertical hot air duct both

logged with asbestos rope, save oil trays, exhaust piping of required length, standard wall/floor mounted fuel with level

indicator and piping and drip proof alternator, self excited, self regulated, screen protected, with excitation system,

capable of delivering the rated system output at 415 volts, 3 phase, 0.8 PF, 50 Hz, 4 wire, running at 1500 RPM, conforming

to IS-4722-1968 with voltage regulation +/-5% of rated voltage from no load to full load. Both the engine and alternator

fitted on a common fabricated steel base plate with antivibration mounting engine and alternator both connected to each

39 other by flexible flange coupling and with floor/wall mounted control panel box comprising of voltmeter ammeter, No. 1.00 26,14,761.90

selector switches, ACB/MCCB/MCB of adequate capacity,

indicator lamps duly wired with HRC fuses. The alternator & control panel shall be connected with provided suitable

capacity armoured cable and complete with Acoustic enclosure (canopy) made out of 16 SWG CRCA Sheet, sound

absorbing material Rockwool of 64 density & 100 mm thick conforming to IS:8183/PU Foam of 40 Density - at least 40 mm.

The resin bonded rockwool covered from inside the canopy by perforated sheet with 3/4 mm holes, sound level not more

than 75 dB at a distance of 1 mtr, as per PVCT norms. .DGset should have inbuilt fuel tank capacity of minimum

hrs of continous running capacity on full load. Erection, commissioning and satisfactory testing as per requirement with

first filling of fuel (minimum up to the 80% of fuel tank capacity), oil, etc. with guarantee / Warrantee of complete system

for Two years. & with obtaining all necessary certificate from Electrical Inspector. The Capacity and Ratings of DG sets

are as below. (Aspernew CPCB4+ Emission norms Engine With - Turbo Charger, EGR(Exhaust Gas Recirculation), CRS

(Common Rail Fuel System), DOC (Diesel Oxidation Catalyst), SCR (Selective Catalytic Reduction), Integrated wiring

harness connected to ECU .) (S)Continuous rating of 320 KVA, BHP not less than 375 BHP

Electro-Mechnaical works at Various Pumping Station

Item Description Unit Qty Rate Amount

Providing & erecting approved make AMF control panel suitable for following size of 3 phase, 415 V., 50 cycles, A.C. diesel

generating set complete of scope as detailed below:

1) Power module: A pair of electromechanically interlocked contactors (for mains & generator) Overload relay for generator

contactor Neutral contactor for mains and generator Power socket for connections.

2) Control and metering module: Line voltage monitor. Generator voltage monitor Ammeter 3 items attempt start facility. Air

circuit breakers/MCB/MCCB of suitable rating for auto/manual operation. Auto/manual switch. Emergency stop push buttons.

Manual start push button. frequency meter. Engine hour meter. Two earthing studs.3) Protection module: The engine

shutdown in the unlikely event of Low lube oil pressure High cylinder head temperature. V belt failure.

4) Indicators with alarm Load on generator.

5) Indicators Load on mains Engine fails to start . Emergency stop battery charger.

The AMF Panel of following capacity

(E) AMF Control Panel for 300KVA / 320KVA 3 phase DG Set

Auto transformer starter suitable for local & remote pump control application consisting of Auto Transformer (vacuum

impregnated, air cooled having three (3) tappings at 50%, 65% and 80%), incomer MCCB / MPCB, overload relay and

contactors as per Type II coordination including digital MFM with RS 485 communication port, analogue type ammeter with

41 selector switch, run hour meter, required protective relays & control accessories. No. 2.00 24,276.00

A. T. S. from 21 to 30 HP

DOL / Star Delta starter suitable for local & remote pump control application consisting of MPCB, overload relay and

contactors as per Type II coordination including digital voltmeter, analogue ammeter with selector switch, run hour meter,

required protective relays & control accessories.

PUMP Required (For 1 DWF) :- Discharge-75 m³/hr, (1250 LPM) ,(2 Sets) of 10 HP, 28 Head

47 PUMP Required (For 2 DWF) :- Discharge-150 m³/hr, (2500 LPM) ,(2 Sets) of 20 HP, 28 Head No. 2.00 13,771.00

LV POWER CONTROL CENTER (PCC)

Supply, installation, testing and commissioning LV Distribution Board (LVDB) totally enclosed, dust & vermin proof, indoor

type, fabricated from CRCA sheet steel with minimum thickness of 3 mm for base frame / channel / gland plates, 2.0 mm for

load bearing members / doors & 1.6 mm for internal partitions, minimum degree of protection - IP 52 as per IS: 2147, suitable

for operation on 3 Phase, 4 Wire, 415 V, 50 Hz, Neutral effectively grounded, with instrumentation compartments

accomodating meters, aux / protective relays, LED type indicating lamps & control MCBs as per IS: 13947, current & voltage

transformers as per IS: 2705, air insulated electrolitic grade Aluminum / Copper bus bar for three phase & neutral system, GI

earth bus for entire length, power / control wiring using 1100 V grade, FRLS insulated copper conductor wires conforming to

IS: 694 & 8130, equipment fittings, horizontally running busbar compartment height of minimum 300 mm, incoming &

ougoing cable connections for 1100 V grade, Aluminium / Copper conductor XLPE / PVC insulated & PVC sheathed armoured

cable. LVDB shall have required incomming / bus coupler / outgoing modules of following type & ratings.

Above 80A, upto & including 250A, 3 & 4 Pole, Air Break Fixed MCCB conforms to IS/ IEC 60947-2 with trip free mechanism,

current limiting type with Thermal Magnetic/ Microprocessor release (O / C, S / C & E / F) with adjustable settings & having

minimum 2NO+2NC potential free auxiliary contacts with all necessary Electro-Mechanical protections & interlocks etc. MCCB

module, when used as Outgoing(s), shall have enclosure dimensions- 400 (H) x 600 (W) x 600 (D) & following technical

(A) 3 Pole, MCCB with Breaking Capacity of Icu=25 KA at 415V (Ics =100% of Icu), Microprocessor release

Above 80A, upto & including 250A, 3 & 4 Pole, Air Break Fixed MCCB conforms to IS/ IEC 60947-2 with trip free mechanism,

current limiting type with Thermal Magnetic/ Microprocessor release (O / C, S / C & E / F) with adjustable settings & having

minimum 2NO+2NC potential free auxiliary contacts with all necessary Electro-Mechanical protections & interlocks etc. MCCB

module, when used as Outgoing(s), shall have enclosure

dimensions- 1800(H) x 600(W) x 600 (D) & following technical features:1.13k) 4 Pole, MCCB with Breaking Capacity of Icu=36

KA at 415V (Ics =100% of Icu), TM release

Above 16A, upto & including 80A, 3 & 4 Pole, Air Break Fixed MCCB conforms to IS/ IEC 60947-2 with trip free mechanism,

current limiting type with Thermal Magnetic/ Microprocessor release (O / C, S / C & E / F) with adjustable settings & having

minimum 2NO+2NC potential free auxiliary contacts with all necessary Electro-Mechanical protections & interlocks etc. MCCB

50 module, when used as Incommer / Bus Coupler, shall have enclosure dimensions- 1800(H) x 500(W) x 600 (D) & following No. 2.00 18,130.00

technical features: 3 Pole, MCCB with Breaking Capacity of Icu=36 KA at 415V (Ics =100% of Icu), TM release

Supply, installaton, testing & commissioning LV APFC panel consisting of required capacitor banks for continuous duty to

improve P.F. 0.85 to 0.99 in required steps enclosed in dust & vermin proof compartment, indoor type, fabricated from CRCA

sheet steel with minimum thickness of 3 mm for base frame / channel / gland plates, 2.0 mm for load bearing members /

doors & 1.6 mm for internal partitions, minimum degree of protection - IP 42, busbar chamber, required size of Al bus bar /

terminals, minimum 10 stage APFC relay, metering, indicating lamps, push buttons complete as per IS: 16636-2017 with latest

ammendment & detailed technical specification and data sheet as under.

Up to 50 KVAR capacity: APFC panel consisting following items.

a) 125 A, 50 kA for 1sec. TP, TM based MCCB with spreader terminals & rotary handle

b) 0-125 A range analogue ammeter of 96 x 96 mm size

51 with selector switch No. 3.00 1,38,383.00

c) 3 nos. 125 / 5A, 10 VA CL-1.0 cast resin type current transformer

d) Suitable rating MCCB / MCB &Contactors for each capacitor bank

e) Suitable rating APP type capacitor banks (vacuum impregnated with non-PCB / non toxic oil, internally delta connected with

built in internal

fuses complete with discharge resistances & terminal cover) of approoved make in required steps with well suited detuned

reactor is placed in

series with each capacitor step. (e.g. 50 KVAR capacity will be provided in steps of 2 nos x 5 KVAR, 2 nos x 7.5KVAR & 2 nos

x12.5 KVAR). (f) Enclosure

dimensions: 1600 (H) x 1150 (W) x 600 (D)

Electro-Mechnaical works at Various Pumping Station

Item Description Unit Qty Rate Amount

Above 50 & up to 100 KVAR: APFC panel consisting following items. a) 250 A, 50 kA for 1sec. TP, TM based MCCB with

spreader terminals & rotary handle b) 0-250 A range analogue ammeter of 96 x 96 mm size with selector switch c) 3nos. 250 /

5A, 10 VA CL-1.0 cast resin type current transformer d) Suitable rating of MCCB / MCB & Contactors for each capacitor bank e)

Suitable rating APP type capacitor banks (vacuum impregnated with non-PCB / non toxic oil, internally delta connected with

built in internal fuses complete with discharge resistances & terminal cover) of approved make in required steps with well

suited detuned reactor is placed in series with each capacitor step. ( e.g. 100 KVAR capacity will be provided in steps of 2 nos x

5 KVAR, 2 nos x 10KVAR, 2 nos x 15 KVAR & 2 nos x 20 KVAR) f) Enclosre dimensions: 2100 (H) x 1150 (W) x 600 (D)

Supply, laying, testing & commissioning 1.1 kV grade, XLPE insulated, stranded Aluminium conductor, galvanised steel flat strip

/ round wire armoured, extruded PVC type ST2 sheathed, heavy duty cable (to be laid on wall surface with necessary clamps /

in existing cable trench / cable trays / conduit / pipe sleeves at road crossing or floor as per site requirement) conforming to

IS:7098 (Part-1) & IEC:60502 (Part-1) of following sizes:

3 Core x 50 Sqmm

54 3.5 Core x 120 Sqmm Rmt 80.00 423.00

55 3 Core x 16.0 Sqmm Rmt 50.00 91.00

57 3 Core x 4 Sqmm Rmt 40.00 61.00

58 3 Core x 6.0 Sqmm Rmt 40.00 70.00

59 3.5 Core x 70 Sqmm Rmt 50.00 287.00

Providing and erecting Pipe type earthing with 40mm dia 2.5mtr long 'B' grade G.I. pipe with necessary coupling buch buried in

61 specially prepared earth pit & G.I. earthwire of 8SWG erected & connected as directed (For panel) No. 7.00 816.28

Supply & laying GI ladder type cable trays with side channels of size - 75 x 15 x 15 mm / 100 x 15 x 15 mm & rungs of size -

x15 x 15 mm spaced at 250 mm apart, fabricated from 2 mm thick sheet steel in standard length of 2.5 meter, duly hot dipped

62 galvanized after fabrication as per IS 2629-1989/ IS 4759-1984 including accessories such as coupler plates/ fish plates, bends, Rmt 120.00 388.00

tees, reducers, elbows, covers and electro-galvanized hardware etc, erected on existing support as per specification and

instruction of Engineer-in-charge.

300(W) x 75(H) x 2.0 mm Thick

Float/ Displacer Type Level Switch

Design, Supply, Installation, Testing and Commissioning of Top mounted Displacer Type level switches with 2 nos SPDT

contacts of Micro switch rated 5 A, potential free power supply, Material of wetted parts shall be SS 316 and the material of

accessories shall be SS. IP 65 or equivalent degree of protection for enclosure, suitable for sump, ESR, tank, vessels and

66 underground reservoirs. The top mounted level switches shall be supplied with still tubes to suit the requirement. No. 8.00 12,802.00

. Accessories like name plate, mating flange, gaskets, fasteners, bolts & nuts, etc. shall be supplied with the Level Switch

of following Range.

a) 0 to 5 Meter

INTERNAL WIRING:-

Providing and erecting mains with 1.1 kV grade, FRLS PVC insulated, ISI-marked stranded copper conductor wires, laid in

suitable conduits, concealed or flush-mounted on walls/ceilings. The work shall include 1.5 sq.mm FRLS PVC insulated

67 stranded copper conductor of green colour for earth continuity, complete for the following sizes, as specified Rmt 3800.00 82.06

(A) With medium class Rigid PVC pipe and accessories

SITC of Main wiring with 3 wire 1.5 sq. mm as per tender specification / IS

SITC of Main wiring with 3 wire 2.5 sq. mm as per tender specification / IS

Point wiring for independent plug, comprising mains wiring of the specified size with 1.5 sq.mm (green) earth wire, both ISI-

marked, 1.1 kV grade, FRLS PVC insulated, multi-strand copper conductors, laid in suitable conduits, for a run up to 10 m. The

work shall include supply and installation of ISI-marked 3-pin / 5-pin socket and Tissino-type switch, complete with proper

69 earth continuity connection, mounted on metal / PVC / wooden box and covered with 3 mm thick PC (polycarbonate) / acrylic / No. 120.00 310.60

laminated sheet, complete in all respects.

[A] For 6amp plug and 6amp switch with 2-1.5 sq.mm Cu.Mains from nearby switchboard/db board upto 6 mt.

(a) with medium class Rigid PVC pipe and accessories erected flushed on wall/ceiling complete

[B]6/16A Plug and 16amp switch with 2-2.5sq.mm Cu. Mains from mcb d b boards.

70 (a) with medium class Rigid PVC pipe and accessories erected flushed on wall/ceiling No. 120.00 489.47

LED LIGHT FIXTURES:

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with

housing used as a heat sink shall be made of thick sheet Steel conforming to IS:513 / CRCA / aluminium die cast powder coated

and high U.V. & corrosion resistance with diffuser with company mark / name 160 V to 270 V, Power Factor more than 0.95,

71 THD < 15%, CCT 3000 K to 6500 K, Luminaire efficacy > 85 lumens / watt, LED LED driver efficiency > 85 % ( fitting required LM- No. 50.00 370.26

79 & LM-80 Certificates ) ( NOTE: Below description have shown ranges of Wattage capacity of LED fittings. The Engineer in

charge may select any wattage capacity between the ranges shown. ) (A) Tube Light with integral driver

(iv) 22-24 Watts, Surge - 2KV,IP-20, conventional 4 feet Cat-lll

Supplying and erecting LED lamps with following wattage capacity of 220 to 240 voltage, minimum 15000 burning hours life,

500 V inbuilt-surge protection, Polycarbonate diffuser, mounting suitable for E14 / E27 / B22 lamp holders, pf >=

72 (A) LED Lamps integral type, with PC diffuser suitable LAMP holder. No. 60.00 111.00

(ii) 5 to 8 watts Cat-III

SAFETY ACCESSORIES:

Supplying & erecting carbon dioxide (CO₂) fire extinguisher user of following capacity with necessary clamps made from 50 ×

mm M.S. flat with nut & bolts grouted in wall complete.

[B] For 5.5 / 6.5 KG Capacity

Electro-Mechnaical works at Various Pumping Station

Item Description Unit Qty Rate Amount

Supplying standard First AID box with antiseptic cream, medicine for use on wounds due burn, crepe bandage, gauge bandage,

74 medicated ready to use bandage (Band-aid), adhesive tape for medicinal user, scissors, anti-septic solution (Savlon or similar) No. 12.00 297.00

etc. (All above contents shall be of standard makes).

Providing and fixing printed instruction chart both in English and Gujarati and duly framed with front glasses, for treatment of

person suffering from Electric shock with minimum 50" diagonally size.

Supplying FIRE bucket round bottom of 9 litres capacity made out of 24 gauge G.I. sheet with extra handle at bottom duly

76 painted white inside and Red outside with FIRE mark, filled with dry-sand and kept on existing stand provided or hung on wall No. 8.00 212.00

providing and erecting Fully Automatic Emergency Light working on 220/250Volts 50C/s. AC supply complete with BATTERY of

6volts, 18watts Lamps Magnetic relay&Battery charging circuit, and extra output socket, to provide sufficient light

continuously for about 4hours including lampsEmergency Light immediately comes to on by providing bright light when main

electric supply fails suddenly. And it is all automatic,controlled by a magnetic relay. It is portable too, can be placed at any

convenient point.

a) Tube emergency light 2feet,20watt ,10AH

Supplying rubber matting of following thickness as per IS:15652/IEC 61111 (b)4mm

Providing pair of rubber handgloves suitable for working on 11 KV/22 KV supply. (b)4mm

Total Amount (In Rs.) =

Total Amount (In Rs.) =

PUMPING STATION AT PAKSHI BHAVAN

Item Description Unit Qty Rate Amount

Sinking single circular well of internal diameter and thickness of steining as specified

up to the level as specified in all sorts of soi l including hard murrum, boulders and all

strata type & strata up to the level as per drawing by dredging, dewatering, drop

chiselling with necessary kentiedge and with mechanical means as may be necessary

1 for this type of work including all labour. plant machinery etc. complete. Zero level to Rmt 3.00 1,03,129.99

be considered from cutting edge level. Including all labour charges with Dewatering

but Excluding cost of Cutting Edge & Well steining For 12.0 mt dia well, internal incl.

Dewatering 1. 0 to 3 mt depth

Providing fabricating and placing cutting edge and curbs as per design MT

and drawing manufactured from structural steel or M.S. plate confirming to

4 ISS 226-1962 incl. Riveting, welding etc. complete. incl. m.s.bars, anchor MT 4.71 1,01,124.10

bolts and structural steel etc complete.

Providing and casting in situ mass cement concrete in grade M-10 (approx.

corresp. to prop. 1:3:6) using granite quartzite trap metal of size 12 mm to

mm incl. consolidation curing etc. complete. with Formwork.

Providing and cast in situ C.C. in grade M-25proportions of ingredients as

per mix design by weigh batching using granite, quartzite trap metal of size

12 mm to 20 mm and or 6 mm to 12 mm including scaffolding centering

6 formwork, needle vibrated consolidation, curing and hydraulic testing etc. Cum 49.12 9,288.55

complete (excluding cost of reinforcement) up to 6 meter height /depth Av.

G.L.for all water retaining structures a. Slab

7 Beams Cum 13.76 9,599.05

8 Vertical walls ( above 25 cm) Cum 141.63 9,126.40

9 Column Cum 2.21 10,574.25

Supplying, cutting, bending, binding, and placing in position steel as per plan and

design and as per ISS 2502 including cost of steel and binding wire for

10 reservior/structures only including lift up to 6 mt. height or depth below G. L. for all MT 31.01 84,189.20

diameters. Do-Thermo mechanically treated (TMT)bars Fe-415 grade for all diameters.

Brick work using common burnt clay buildings brick having crushing strength not less

than 35kg/sq.cm. in foundation and plinth in CM 1:6 ( 1 Cement: 6 Fine Sand) Extra for

brick in super structure above plinth level up to floor two level A) Modular

Providing and laying polished Kota stone slab flooring over 20mm (Average) thick base

of cement mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 -

12 coarse sand) laid over and jointed with grey cement slurry mixed with pigment to Sqm 115.74 992.66

match the shade of slab including rubbing and polishing etc. complete. (A) 25mm thick

Providing 15mm thick cement plaster in single coat on fair side Brick/Concrete wall for

13 interior plastering upto floor two level finished even and smooth in : 1) Cement Mortar Sqm 551.57 188.42

1:3 ( 1cement : 3 sand )

Providing 20 mm thick cement plaster in single coat on single or half brick wall for

14 interior plastering upto floor two level finished even and smooth in : 1) Cement Sqm 147.84 217.94

Mortar 1:3 ( 1cement : 3 sand )

20mm thick sand faced cement plaster on wall upto hight 10 meters above ground

level consisting of 12mm thick backing coat of CM 1:3 ( 1 cement : 3 sand ) and 8mm

thick finishing coat of CM 1:1 ( 1 cement : 1 sand ) etc complete

White washing with lime on wall surfaces( two coats) to give an even shade including

16 thoroghly brooming the surface to remove all dirt, mortar drops and other foreign Sqm 699.40 12.41

Finishing wall with water proofing cement paint on wall surfaces (two coats) to give an

approved brand and manufactures and of required shape even shade after throughly

17 brushing the surface to remove all dirts, and remains of loose powdered material. Sqm 172.55 57.44

PUMPING STATION AT PAKSHI BHAVAN

Item Description Unit Qty Rate Amount

Providing and fixing copper lightning arrestor incl. copper strip and earthing plate etc.

complete (incl. cost of excavation for earthing plate etc.

Providing and fixing rolling shutters of approved make made of 80mm wide MS Laths

inter locked together through their entire length and jointed together at the ends by

end lokes mounted on specially designed pipe shaft with bracket plates, guide

channels and arrangements for inside and outside locking with push pull operation

complete excluding the cost of hood cover and spring A) shutters having width

Providing and fixing 35 mm thick shutters for Doors, windows and clearstory windows

20 including blackenamelled M.S. butt hinges with necessary screws. (A) Indian teak Sqm 3.60 3,656.67

wood. (i) Fully Panelled.

Providing and fixing 50 cm wide M.S. Ladder fabricated from M.S. Flats 10 mm x 75 mm

with 20 mm dia steel bar steps in double rows, @ 30 cm C/C. The include stays of

mm x 50 mm flats fixed at 3 meter C/C with welding anchoring and 3 coats anticorrsive

paint. M.S. Ladder(Without safety cage)

Providing an fixing 25 mm x 5.2 mm MS railing with three horizontal rows and posts of

angle iron of size 65 mm x 65 mm x 8 mm RCC 150 mm and 1.15 meter height and

placed at 1.85 mt / c/c including painting two coats and anchorage in CC etc complete

Providing and fixing depth gauge painted on TW plank 25 mm / MS plate 4 mm thick

float, level indicator sliding wire on standard pullies incl. necessary arrangement to

prevent the swinging etc. complete with calibration up to 5 mt height.

Providing, installing & commissioning Lifting Device including all electrical cable

connection complete: Chain pulley block 3 tonne capacity

Purchasing & supplying at site of works, with Railway freight, loading, unloading,

25 carting, etc. complete such as joints, channels, angles, iron rails, etc. Angles 10mm & MT 1.00 72,916.00

above thick For EOT Crane

Labour charges for lowering laying, erecting, fixing, various size of M. S. section such as

26 joints channel, angles plates etc. complete. do - with fabrication. MT 1.00 13,069.75

Single Girder EOT Crane: Supply, installation, testing & commissioning single girder

type fully electrically operated EOT crane with electrically operated hoist, class II duty,

geared travelling trolley with seven meter lift complete with long travel rail track (40

mm sq. bar), moving or cross girder, all three motions electrically operated by suitable

27 rating motor IP 54, control panel & down pendant control block, brake, safety device, Nos 1.00 5,54,250.00

cables form motor to starter panel & other required accessories & tested as per IS

Specifications.

3 T, Span-9 m - 12 m, Long travel-12 m, Lift-6 m - 10 m.

Total Amount (In Rs.) =

Total Amount (In Rs.) =

SCREEN CHAMBER AT PAKSHI BHAVAN PS

Item Description Unit Qty Rate Amount

Sinking single well of internal Area and thickness of steining as specified up to the

level as specified in all sorts of soil including hard murrum, boulders and all strata type

& strata up to the level as per drawing by dredging, dewatering, drop chiselling with

necessary kentiedge and with mechanical means as may be necessary for this type of

work including all labour. plant machinery etc. complete. Zero level to be considered

from cutting edge level. Including all labour charges with Dewatering but Excluding

cost of Cutting Edge & Well steining For Screen Chamber 1. 0 to 3 mt depth

2 2. Beyond 3 mt up to 6 mt depth Rmt 3.00 4,340.78

3 3. Beyond 6 mt to 9 mt depth Rmt 2.40 4,654.43

Providing fabricating and placing cutting edge and curbs as per design MT and drawing

manufactured from structural steel or M.S. plate confirming to ISS 226-1962 incl.

Riveting, welding etc. complete. incl. m.s.bars, anchor

bolts and structural steel etc complete.

Providing and casting in situ C.C. in grade M-15 (approx. corresp. to prop. 1:2:4)

(proportions as per mix design or as per Table 9 of IS456 2000 in masses by weigh

batching ) using granite, quartzite trap metal of size 6 mm to 20 mm for RCC work,

including scaffolding centering, form work, needle vibrated consolidation, curing

comp. up to 6 meter depth or height (excluding cost of reinforcement and neat

finishing) with centering and shuttering/deshuttering etc. comp. for structure for

other than water retaining. Screen Chamber

Providing and cast in situ C.C. in grade M-25 proportions of ingredients as per mix

design by weigh batching using granite, quartzite trap metal of size 12 mm to 20 mm

and or 6 mm to 12 mm including scaffolding centering formwork, needle vibrated

consolidation, curing and hydraulic testing etc. complete (excluding cost of

reinforcement) with centering and shuttering/deshuttering etc. comp. up to 6 meter

height /depth Av. G.L.for all water retaining structures

a) Base slab Screen Chamber

7 b) Vertical Wall Screen Chamber cum 22.31 9,126.40

Supplying, cutting, bending, binding, and placing in position steel as per plan and

design and as per ISS 2502 including cost of steel and binding wire for

8 reservior/structures only including lift up to 6 mt. height or depth below G. L. for all MT 3.35 84,189.20

diameters. Do-Thermo mechanically treated (TMT)bars Fe-415 grade for all diameters.

Providing 10mm thick cement plaster in single coat on brick/concrete walls for interior

9 plastering upto floor two level and finished even and smooth in (iii) Cement mortar Sq.mt. 68.80 103.40

1:6 (1-cement:6-sand) Inside Plaster Screen chamber

Providing and fixing 50 cm wide M.S. Ladder fabricated from M.S. Flats 10 mm x

mm with 20 mm dia steel bar steps in double rows, @ 30 cm C/C. The include stays of

10 mm x 50 mm flats fixed at 3 meter C/C with welding anchoring and 3 coats

anticorrosive paint.

Providing Screening arrangement in Screen chamber, fixing of screen for screening.

Top cover for screen chamber with locking arrangment M.S. bar cover to be provided

Total Amount (In Rs.) =

Total Amount (In Rs.) =

Item Description Unit Qty Rate Amount

Designing (aesthetically) and constructing R.C.C frame

structure of pump room with positive suction / Negative

Upto 6.00 M (Plinth Level to Top slab Beam bottom)

1. Minimum 15 % opening for ventilation should

be provided. Sq.M

2. Pump room rolling shutter, door and windows t.

of aluminium section and window grill of iron

should be provided (Included in Cost).

3. Plinth level of Pump house should be min.1

meter above GL.

4.Cost does not include foundation for pumping

Total Amount (In Rs.) =

Total Amount (In Rs.) =

Construction of CC Road

Item Description Unit Qty Rate Amount

Rolling and consolidation of soling including filling in depression

1 which occurduring the process, with powerroler 8 tonne to 12 Sqmt 19,723.20 22.36

Providing and laying cement concrete 1:3:6 (1-Cement : 3- coarse

sand : 6- hand broken stone aggregates 40 mmnominal size) and

curing complete excluding cost of formwork in (A) Foundation

Providing and laying in position Ready Mixed M-200 grade

concrete for reinforced cement conctere work , using cement

content as per approved Design Mix manufactured in fully

automatic batching plant and transported to site of work in

transit mixer for a lead up to 10 kms having continuous agitated

mixer, manufactured as per mix design of specified grade for

reinforced cement concrete work including pumping of R.M.C.

from transit mixer to site of laying, excluding the cost of

centering shuttering finishing and reinforcement including cost of

admixtures in recommended proportions as per IS: 9103 to

accelerate/ retard setting of concrete, improve workability

without impairing strength and durability as per direction of the

Engineer - in - charge. Without Fly Ash (Min cement level as per

latest IS 456 shall be maintained)

Total Amount (In Rs.) =

Total Amount (In Rs.) =

Temporary Road Restoration and Paver Block/Kota Stone

Item Description Unit Qty Rate Amount

Providing WBM surface using 45 to 63 mm size machine

crused BT metal of 150mm compacted thickness in two

layer using 20% screening 11.20mm 0.16 cum and

cum stone dust as filler including watering and

consolidation of WBM with vibrator roller

Providing and fixing pre-cast Rubber Dye / steel Dye inter

locking concrete block 60mm thick with grade of concrete

M300 pnumatic compressed / vibrated mechanically and

as per approved design Confirming to IS 15658 :

including 35 mm Sand layer for levelling and filling the

joint with sand in proper line and level as per guidlines of

IRC : SP 63-2018 etc. Complete.

Providing and laying polished Kota stone slab flooring over

20mm (Average) thick base of cement mortar 1:6 (1-

3 cement : 6-coarse sand) or L.M. 1.1.5 laid over and jointed Sqmt 16,506.00 1,096.33

with grey cement slurry including rubbing and polishing

etc. complete. (B) 30 mm thick

Total Amount (In Rs.) =

Total Amount (In Rs.) =

Item Description Unit Qty Rate Amount

Design, supply, construction, installation, testing and

commissioning of 14.00 MLD Capacity sewage treatment plant

based on Open Technology with Biological Nutrient Removal

(BNR) with MCC panel room, DG set and all civil, electrical,

mechanical, piping and instrumentation works with three

months trial run including but not limited to;

a) Connecting the existing rising main with all fittings up to the

b) Internal roads of 4.5m

c) 33% green zone

d) Providing compound wall and

e) Discharge effluent pipe up to 500 m.

All other Constitions and General Technical Specification are as

Total Amount (In Rs.) =

Total Amount (In Rs.) =

02-YEARS OF OPERATION AND MAINTENANCE

Item Description Unit Qty Rate Amount

Comprehensive Operation and maintenance of the various

components of Under ground Drainage scheme undertaken in this

tender mainly sewer collecting network, pumping station, Rising

Main pipeline, pumping machinery & Electrical works & other works

as a whole including:

1) Breakdown Maintenance or Emergency Maintenance,

2) Day to day Maintenance,

3) Preventive or Periodic Maintenance,

1 4) Major Maintenance (or Special repairs and replacement including Year 1.00 14,09,625.94

Training to O & M staff of Municipality.

The rate shall also include all consumables and deployment of

Manpower but excluding electric power (The electrical bill for power

shall be paid by the municipality).

The O & M work shall be carried out as per detailed specifications in

the tender & maintaining the record for the same.

For 1st year O&M

2 For 2nd year O&M Year 1.00 14,09,625.94

Total Amount (In Rs.) =

Total Amount (In Rs.) =

07-YEARS OF OPERATION AND MAINTENANCE FOR STP

Item Description Unit Qty Rate Amount

Operation and Maintenance of the various components of

Upgraded 14 MLD Sewage Treatment Plant based on extended

aeration system as per NGT Norms and other Under Ground

Drainage Work as a whole incluiding,

1) Breakdown Maintenance or Emergency Maintenance,

2) Day to day Maintenance,

3) Preventive or Periodic Maintenance,

4) Major Maintenance (or) Special repairs and replacement

including Training to O & M staff of Municipality. The rate shall

also include cost against fixed charges, consumables flow

1 dependent charges, maintenance repair charges, replacement Year 1.00 22,76,466.70

charges, miscellaneous charges and deployment of manpower

but excluning electric power. all the components executed

under this tender mainly pimping machinery, pumping station.

Rising Main, including estabilishment charges and all materials

on repairing of pipe line and other civil works and pumping

machinery. The O & M work shall be carried out as per detailed

specificstions in the tender & maintaining the record for O & M.

2 For 2nd Year Year 1.00 23,90,290.04

3 For 3rd Year Year 1.00 25,09,804.54

4 For 4th Year Year 1.00 26,35,294.76

5 For 5th Year Year 1.00 27,67,059.50

6 For 6th Year Year 1.00 29,05,412.48

7 For 7th Year Year 1.00 30,50,683.10

Total Amount (In Rs.) =

Total Amount (In Rs.) =