Upgradation of Secondary School building at district MORBI.

Excavation for foundation upto 1.5 m depth including sorting out and

stacking of useful materials and disposing off the excavated stuff upto

50 Meter lead.(A)

Loose or soft soil

Filling foundation and plinth with murrum or selected soil in layers

11 of 20 cm. thickness inculding watering, ramming and consolidation 184.39 301.78 Cmt.

Brick work using common burnt clay building bricks having crushing

12 strength not less than 35 kg./Sq.Cm. in foundationand plinth in 90.53 4382.60 Cmt.

Cement Mortar 1:6. (1‐ Cement : 6 ‐finesand)(C) Fly Ash Bricks

Brick work using common burnt clay building bricks having crushing

strength not less than 35Kg./Sq.Cm. for superstructure in cement

mortar 1:6(1 cement :6 fine sand) including curing etc. complete. (C)

Fly Ash Bricks For all heights and all floor

Providing & laying Cement Concrete 1:4:8 (1 Cement :4 Coarse sand

:8 hand brocken stone aggregates of 40mm nominal size) in plinth

and curing complete including cost of formwork. (A) Foundation and

Plinth - At plinth level

Providing and laying cement concrete 1:5:10 (1- Cement : 5- Coarse

sand : 10- hand broken stone aggregates 40 mm nominal size) and

curing complete including cost of formwork in (A) Foundation and

Providing & laying Cement Concrete 1:2:4 (1 Cement : 2 Coarse

Sand : 4 graded stone aggregate 20 mm nominal size) & curing

complete including cost of form work (A) Foundation and Plinth -

Below Tie beam, Plinth protection & surface leveling work.

Providing I.S.I. T.M.T Bars Fe.500D steel reinfocement (ISI mark)

17 Confirmed to IS-1786 for R.C.C.work including Cutting, bending, 1344.72 77.29 Kg.

binding and placing in position etc. complete.For all floors

Providing 10mm thick cement plaster in single coat on on

brick/concrete walls & Ceilling & Soffit of stair interior plastering in

cement mortar 1:4(1 cement 4 sand) watering, curing etc.

complete.For all floors

Providing 15mm thick cement plaster in single coat on rough or fair

side of single or half brick wall for interior plastering in cement

mortar 1:4(1 cement 4 sand) watering, curing etc. complete.For all

Description Of Item Quantity Rate Unit Amount

20mm thick sand faced cement plaster on walls above ground level

consisting of 12mm thick backing coat of cement mortar 1:3(1

cement 3 sand) and 8mm thick finishing coat of cement mortar 1:1(1

cement 1 sand) watering, curing etc.complete for any Height.

Finishing wall with weather proof exterior emulsion paint on wall

surface (two coats) to give an required shape even shade after

thoroughly brushing the surface to remove all dirt, and remains of

loose powdered materials.etc complete. The rate shall be including of

providing two coats of primer of approved brand and manufacturer

on new wall surfaces to give and even shade including throughly

brushing the surface free from mortar dropping and other foreign

matter and sand papered smooth.

Distempering with dry distemper of approved brand and manufacture

(two coats) and of required shade on wall surfaces to give an even

shade, over and including applying one coats of Birla (White Cement

22 based) or Asian (acrylic lapy) or equivalent and a priming coat of 18808.73 91.88 Smt.

whiting after thoroughly brooming the surface free from mortar

dropping and other foreign matter and sand paper smooth. The rate

shall be including scraping and old deteriorated of existing paint.

Painting two coats (excluding priming coat) on new wood and

wood based surface with ready mixed paint, brushing, oil,

23 gloss, semi gloss to give and even shade including cleaning of 2862.31 110.57 Smt.

all dust, dirt and other foreign matter sand papering and

Painting two coats (excluding priming coat) on new steel

and other metal surface with synthetic enamel paint,

brushing to give an even shade including cleaning the

surface of all dirt, dust and other foreign matter.

Providing and laying 25mm thick polished Kota stone

flooring/staircase treads (two pieces with three groves in front of

25 steps) over 20mm (average) thcik base of cement mortar 1:6 (1 297.79 1013.87 Smt.

cement 6 coarse sand) laid over and jointed with grey cement slurry

including curing, rubbing, and polishing etc. complete.

Providing and laying 18 mm thick mirror polished black granite stone

machine cut in single piece (Max. available) in sill and jambs laid

over 10 mm thick cemen mortar 1 : 3 (1 cement : 3 coarse sand) and

26 jointed with grey cement slurry with matching pigment incl. rubbing 19.07 2061.11 Smt.

and polishing half rounding edge both side etc. complete colour and

shed as approved by architect engineer in charge. (As directed by

Engineer in charge)

providing & laying cement water proofing of average 60mm thick for

terrace for all floors using first layer cement mortar (1:3) over an

exsisting surface second layer of arranging brick bats acording to slop

adding suitable chemical to make water tieght & again third layer of

cement mortar 1:3 on above including adding water proffing

compound and finishing top with net cement slury using cement @

2.75 kg/sq mt. making any patterns and design on the top etc.

complete as directed.(As directed by Engineer in charge)

Providing & Laying Broken China Mosaic flooring for plain & curve

surface 12mm to 20mm of broken piece of ceramic tiles or Glazed

tiles ( one or more colour as directed by Engg. In charge ) to be laid

over cement mortar bedding of CM 1:3 to plain or and slopes and to

28 be tempered to bring mortar cream up to and colour pigment 1888.19 779.70 Smt.

including rounding of junctions and extending them pu to 15cms

along the wall and curing with bends any patterns of designs as per

deawing or directions including cleaning with water and oxilic acid

using 1 kg / 1 bag of water proofing materials.

Providing cement vata (10 cm X 10 cm size) quartar round in cement

mortar 1:1 including neat cement finishing, watering etc. complete

Respectely plaster acitivity shall be commenced only after completion

Description Of Item Quantity Rate Unit Amount

Providing and fixing FRP frame size 100x50 mm and 28mm thick

FRP depress panel shutter having extra reinforcement on sides &

edges in Gel coat finish. The core of the shutter & frame is to be filed

up with injected fire retardant grade polyurethene foam done in situ

30 alongwith embedded wooden pieces for stiffening & also taking 57.12 2377.76 Smt.

hinges & fintures. The whole FRP frame & shutter is to be water

proof weather proof, termite proof & resistance to mild acid/alkali.

Rates are to be inclusive of S.S hinges with necessary screws &

alluminium fixtures & fastenings & fastener sleeve.

Steel work, M.S Grill, welded in built up sections framed work

including cutting, hoisting, fixing in position and applying a priming

coat of read lead paint. (A)In beams and joists, channels angles Tees,

flats, with connecting plates or angle cleats as in main and cross

beams. Hip and jack rafters, purlins conneted to common rafters and

Providing & fixing G.I rain water Spout of 65mm dia and 60cm

Painting of logo on front side wall as directed by Engineer in charge

and as per approved drawing.

Providing and laying white glazed tiles 6mm thick in flooring treads

of steps and landing laid on a bed of 12mm thick cement mortar 1:3

(1-cement : 3-coarse sand ) finishing with flush pointing in white

Providing and laying white glazed tiles 6mm thick in skirting, riser of

35 steps and dedo on 10mm thick cement plaster 1:3 (1-cement : 3 865.75 1127.48 Smt.

coarse sand) and jointed with white cement slurry.

Providing and fixing pre-cast Rubber Dye / steel Dye inter locking

concrete block 60mm thick with grade of concrete M300 pnumatic

compressed / vibrated mechanically and as per approved design

Confirming to IS 15658 : 2006 including 35 mm Sand layer for

levelling and filling the joint with sand in proper line and level as per

guidlines of IRC : SP 63-2018 etc. Complete.

Providing and fixing of highly durable precoated Roofing Sheets

having high quality color coating throughout the roof and having

minimum 0.6 mm thickness .The Color Coated sheet Roofing fixed

37 with galvanized iron /color powder coated J or L Hooks, Bolts and 202.10 1098.53 Smt.

nuts 8mm diameter with bitumen and G.I. limpet washer or color

powder coated limpet washer. filled with white lead complete as per

approved sample and color as directed by engineer in charge

Construction of a soak well of as per the approved drawing & design

etc.in all sort of soil complete as directed and approved by engineer

incharge.( The internal In-to-in dimension shall be considered for

Construction of a septic tank as per the approved drawing & design

etc.in all sort of soil complete as directed and approved by engineer

incharge. ( The internal In-to-in dimension shall be considered for

Providing and fixing washbasin with single hole for pillar tap with

M.S. brackets painted white including sutting holes and making good

40 the same but excluding fittings.(A) Vitreous China:(ii) Flat Back 12.00 2068.97 No.

washbasin 550 mm x v 400mm size. (i) In white colour including CP

Brass west , MI Fisher union and Pillat tap

Providing and fixing screw down bib taps of following size.(B) Brass

chromium plated screws down Bib Tap. (i) 15mm dia.

Constructing brick masonry chamber for underground C.I. Inspection

chamber and bends with bricks having crushing strength not less than

35Kg/Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x

610mm intenal dimensions total weight of cover with frame to be not

less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg.)

(R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse sand :4-graded

stone aggregate 20mm size) foundation concrete 1:5:10 inside plaster

15mm thick with cement mortar 1:3 finished smooth with a floating

coat of neat cement on walls and bed concrete etc. complete.(i) Inside

dimensions 455mmx 610mm and 450mm deep for single pipe line.

Description Of Item Quantity Rate Unit Amount

Providing & fixing urinal of Approved quality including connecting

the urinal with waste pipe, trap etc. complete (A) White earthenware

43 flat back or corner type (including Angle cock,Waste 20.00 1834.36 No.

coupling,connection pipe & waste pipe) as approved by engineer

Providing and fixing wash down water closet (European type W.C

pan) with integral P or S trap including jointing the trap with soil

44 pipe in cement mortar 1:1 (1 cement : 1 fine sand) (seat cover,Jet 12.00 2244.31 No.

spray & Flush Tank to be measured Including) (A) Vitreous China (I)

Long pattern white as directed and approved by engineer incharge.

Providing and fixing water closet squatting pan (Indian type W.C

pan) size 580 mm (earthwork, bed concrte, foot rests,Flush Cock and

trap to be measured and including paid) (A) Vitreous China (I) Long

pattern white as directed and approved by engineer incharge.

Providing erecting and fixing double coated ISI water tank of

46 required capacity each with all necessary fittings and connection etc. 6000.00 3.95 liter

complete on terrace

47 Providing & fixing UPVC ball valve(A) 15mm dia. 24.00 440.56 No.

Providing and fixing PVC SWR Nahni trap IS 14735 for drain -

mm diameter with jali of the following nominal diameter of self

cleansing design with C.I scread down or hinged grating including

the cost of cutting and making good the walls.

Providing laying and jointing in true line and level 40mm dia.

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the wall with

49 the help of clamp at every two metre C/C or shall be concealed as 200.00 148.12 Rmt

directed including necessary fittings etc. including testing of pipe and

joints and fixing the same with adhesive solvent, including cost of all

Providing laying and jointing in true line and level 25mm

dia.U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the wall with

50 the help of clamp at every two metre C/C or shall be concealed as 200.00 91.84 Rmt

directed including necessary fittings etc. including testing of pipe and

joints and fixing the same with adhesive solvent, including cost of all

Providing laying and jointing in true line and level 15mm

dia.U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the wall with

51 the help of clamp at every two metre C/C or shall be concealed as 120.00 72.65 Rmt

directed including necessary fittings etc. including testing of pipe and

joints and fixing the same with adhesive solvent, including cost of all

Providing & fixing to wall ceiling and floor 6.0 kg F/cm2 working

pressure PVC pipes of the following out side dia. Special density

complete with special flange compression type fitting,wall clips etc.

including making good the wall ceiling and floor.(G) 160 mm dia

Providing & fixing to wall ceiling and floor 6.0 kg F/cm2 working

pressure PVC pipes of the following out side dia. Special density

complete with special flange compression type fitting,wall clips etc.

including making good the wall ceiling and floor.(G) 110 mm dia

Providing and fixing chromium plated brass half trun flush cock of

54 approved quality including fixing in pipe line etc. complete..[ii] 25 24.00 263.77 No.

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of

sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC

insulated multi strand copper wires up to 10 mtr length , in below

type of pipe erected with 6A Modular type switch / bell push &

accessories and earth continuity of following type, erected on PVC /

Metallic/Wooden box, single mounting base frame covered with

textured/metallic/white front plate modules erected on / in wall /

ceiling as per pipe erected, with necessary Lamp holder/ceiling rose /

H.D.Connector as directed. (a) with medium class Rigid PVC pipe

and accessories erected flushed on wall/ceiling complete Cat. III

Description Of Item Quantity Rate Unit Amount

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(Green) both are of .ISI marked 1.1 KV Grade FRLS PVC insulated

multi strand copper wires up to 10 mtr length, in below type of pipe

erected with 6A Modular type switch and hum free EME four or

more step type electronic fan regulator with separately mounted and

56 accessories with earth continuity of following type erected on PVC / 40.00 522.17 Pt.

Metallic/Wooden box, single mounting base frame covered with

textured/metallic/white front plate modules erected on / in wall /

ceiling as per pipe erected. with necessary ceiling rose /

H.D.Connector as directed. (a) with medium class Rigid PVC pipe

and accessories erected flushed on wall/ceiling complete Cat. III

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated

multi strand copper wires up to 10 mtr length, in below type of pipe

erected complete with Modular type switch & 5 pin Plug erected on

PVC / Metallic/Wooden box covered with appropriate front plate

modules erected on / in wall / ceiling as per pipe erected with

following type of accessories. [I] For 6A Plug and 6 a switch with 2-

1.5 sq.mm Cu. Wire from nearby switchboard/mcb db board (a) with

medium class Rigid PVC pipe and accessories erected flushed on

wall/ceiling complete Cat. III

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated

multi strand copper wires up to 10 mtr length, in below type of pipe

erected complete with Modular type switch & 5 pin Plug erected on

PVC / Metallic/Wooden box covered with appropriate front plate

modules erected on / in wall / ceiling as per pipe erected with

following type of accessories.[II] For 16A Plug and 16 amp switch

with 2-2.5 sq.mm Cu. Wire from mcb db board. (a) with medium

class Rigid PVC pipe and accessories erected flushed on wall/ceiling

complete Cat. III

Point wiring for on board Looped Plug with 6A Modular type switch

& 5 pin socket erected on PVC / Metallic/Wooden box, single

59 mounting base frame covered with textured / metallic/white front 60.00 257.55 Pt.

plate modules erected on / in wall / ceiling with following type

accessories Cat. III

Providing following type of Modular Type Accessories mounted with

PVC / metallic/Wooden box, single mounting base frame covered

60 with textured / metallic/white front plate , modules erected with 60.00 25.25 Each

necessary connections as per site situation directed by Engineer In

charge. (7) Blank Plate Single Cat.III

Providing following type of Modular Type Accessories mounted with

PVC / metallic/Wooden box, single mounting base frame covered

61 with textured / metallic/white front plate , modules erected with 2.00 160.59 Each

necessary connections as per site situation directed by Engineer In

charge. (11) 6 Amps. Bell Push Cat.III

Providing following type of Modular Type Accessories mounted with

PVC / metallic/Wooden box, single mounting base frame covered

62 with textured / metallic/white front plate , modules erected with 15.00 199.98 Each

necessary connections as per site situation directed by Engineer In

charge (10) 6/16Amp. Universal socket Cat.III

Providing & erecting Switch board for Computer or electric apparatus

consisting of following modular type accessories mounted with PVC

/ Metallic concealed/open box with single mounting base frame

covered with textured/metallic /white front plate,modules erected

with necessary connections as directed

1 no. 6A/16A universal plug-switch combined.

3 nos. 6A Switch

3 nos. 6A 5 pin Plug For Modular Type Accessories Cat. III

Description Of Item Quantity Rate Unit Amount

Providing & erecting Approved make Power Saving 50 Watt Ceiling

Fan with double ball bearing ISI mark with Condenser 230 volt A.C.

64 50 Hz 1200 mm sweep complete having 3blades with aluminium 40.00 1948.29 Each

blades with , canopy & 30 cm. down rod erected with 3 core flexible

wire with earthing.(Make shall be approved by Engineer in charge))

Supplying & erecting Fan Hook of 10 mm M.S. Round bar grouted in

RCC slab with Making the site as original.

Supplying and erecting LED indoor fittings with LEDs of wattage

0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing used

as a heat sink shall be made of thick sheet Steel conforming to IS:

513/CRCA/ aluminium die cast powder coated and high U.V. &

corrosion resistance with diffuser with company mark/name 160V to

270V, Power Factor more than 0.95, THD < 15%,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage capacity

between the ranges shown.) (A) Tube Light with integral driver (c)

18-20 Watts, Surge - 2KV,IP-20, 4 feet Cat-lll

Supplying and erecting led lamps with following wattage capacity of

220 to 240 voltage, minimum 15000 burning hours life, 500 V in

67 built-surge protection,Polycarbonate diffuser, mounting suitable for 16.00 112.11 Each

E14 / E27 / B22 lamp holders, pf >= 0.5 (B) LED Lamps integral

type, with PC diffuser suitable LAMP holder(b) 5 to 8 watts Cat-lll

68 Decorative call bell Ting-tong box type 250 volts complete erected 1.00 71.71 Each

Providing and erecting ISI mark Medium class RIGID PVC PIPES of

following size complete to be erected on/in wall or ceiling erected

69 with necessary PVC fittings & Junction boxes fixed with adhesive 750.00 24.24 Rmt

solution & Clamps with following dia of pipes, in approved manner

as directed (a)20 mm

Providing and erecting ISI mark Medium class RIGID PVC PIPES of

following size complete to be erected on/in wall or ceiling erected

70 with necessary PVC fittings & Junction boxes fixed with adhesive 225.00 33.33 Rmt

solution & Clamps with following dia of pipes, in approved manner

as directed (b) 25 mm

Providing & erecting PVC Corrugated Flexible Conduit with

71 required nos. of coupling, PVC bushes, Check-nuts etc. complete of 15.00 21.21 Rmt

following sizes. (2) 25 mm

Providing and erecting Mains with 1.1 KV grade FRLS PVC

insulated ISI marked stranded Copper conductor wire in following

type of pipe to be erected concealed in /flushed on wall/ceiling, with

1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of

green colour for earth continuity of following size (A) with medium

class Rigid PVC pipe and accessories (a) 2 wire 1.5 sq. mm

Providing and erecting Mains with 1.1 KV grade FRLS PVC

insulated ISI marked stranded Copper conductor wire in following

type of pipe to be erected concealed in /flushed on wall/ceiling, with

1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of

green colour for earth continuity of following size (A) with medium

class Rigid PVC pipe and accessories (b) 2 wire 2.5 sq. mm

providing and erecting Mains with 1.1 KV grade FRLS PVC

insulated ISI marked stranded Copper conductor wire in following

type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm

copper conductor FRLS PVC insulated stranded wire of green colour

for earth continuity of following size A) with medium class Rigid

PVC pipe and accessories (a) 2 wire 4 sq. mm

Description Of Item Quantity Rate Unit Amount

providing and erecting Mains with 1.1 KV grade FRLS PVC

insulated ISI marked stranded Copper conductor wire in following

type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm

copper conductor FRLS PVC insulated stranded wire of green colour

for earth continuity of following size (A) with medium class Rigid

PVC pipe and accessories (b) 2 wire 6 sq. mm

providing and erecting Mains with 1.1 KV grade FRLS PVC

insulated ISI marked stranded Copper conductor wire in following

type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm

copper conductor FRLS PVC insulated stranded wire of green colour

for earth continuity of following size (A) with medium class Rigid

PVC pipe and accessories (g) 4 wire 4 sq. mm

providing and erecting Mains with 1.1 KV grade FRLS PVC

insulated ISI marked stranded Copper conductor wire in following

type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm

copper conductor FRLS PVC insulated stranded wire of green colour

for earth continuity of following size (A) with medium class Rigid

PVC pipe and accessories (h) 4 wire 6 sq. mm

providing and erecting Mains with 1.1 KV grade FRLS PVC

insulated ISI marked stranded Copper conductor wire in following

type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm

78 copper conductor FRLS PVC insulated stranded wire of green colour 75.00 398.95 Rmt

for earth continuity of following size (A) with medium class Rigid

PVC pipe and accessories (i) 4 wire 10 sq. mm (use earth wire of

Supplying and erecting Flexible PVC insulated multi strand multi

79 core 1.1 kv grade ISI marked copper wires of following size to be 60.00 46.46 Rmt

erected as directed. e) 1.50 Sq.mm 3 core round PVC sheathed

Providing and erecting Sheet Steel powder coated MCB distribution

board - flush / surface mounted fitted with busbar, neutral link, earth

bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 &

without MCB to house appropriate nos. of MCBs.(The DBs should

be used of same company of MCB to be used) suitable for (A) single

phase incoming and horizontal single phase outgoing (iv)12 way

providing and erecting Approved make ELCBs / RCCBs conforming

to IS: 12640 and having sensitivity of 30 mA and Short Circuit

withstand capacity of 10 KA and suitable for operation on single

81 phase 240 V,50Hz. having characteristic of quick action & tripping 5.00 1969.50 Each

with all advance feature & do not incorporate any electronic

component. for following Max. rating erected as directed (i)

Amps.DP Cat. III

providing and erecting Miniature circuit breaker single pole 6A to

25A suitable to operate on 240 V A.C. system and having breaking

capacity 10 KA to be erected in existing box. confirming to IS

8828/1996 with ISI Mark Cat.III

Providing & erecting 240 V MCB double pole switch for motor &

inductive load (C Curve) having 10 KA breaking capacity &

confirms to IS : 8828 in existing box having following capacity (A)

to 32 Amp. Cat.III

Providing & erecting 240 V MCB double pole switch for lighting

Load (B Curve) having 10 KA breaking capacity & confirms to IS :

8828 in existing box having following capacity (A) 6 to 32 Amp.

providing and erecting Mains with ISI marked, 1.5KV grade

electrolyte multi stranded, annealed copper conductor with heat

resistant PVC insulated conforms to IS 694, IEC - 227 erected in

85 existing pipe of following size (Specifically for control panel, relays, 10.00 37.37 Rmt

power switchgears, motor starters & control wiring) with required

size of copper lugs, nuts and bolts if required. (g) One wire 16.00 sq.

Description Of Item Quantity Rate Unit Amount

providing and erecting Mains with ISI marked, 1.5KV grade

electrolyte multi stranded, annealed copper conductor with heat

resistant PVC insulated conforms to IS 694, IEC - 227 erected in

86 existing pipe of following size (Specifically for control panel, relays, 10.00 91.91 Rmt

power switchgears, motor starters & control wiring) with required

size of copper lugs, nuts and bolts if required. (h) One wire 25.00 sq.

Providing & erecting Medium Voltage Danger Notice Board sticker

87 as per language suggested by engineer incharge of standard size as 5.00 26.26 Each

Supplying & erecting earth pit of minimum bore dia.150mm size

approved make Earthing Electrode consisting Pipe-in-Pipe

Technology as per IS 3043-1987 made of corrosion free hot dipped

G.I.Pipes having Outer pipe dia of 50mm having 80-200 Micron

galvanising, Inner pipe dia of 25 mm having 200-250 Micron

galvanising, connection terminal dia of 12mm with constant ohmic

value surrounded by highly conductive compound with high charge

dissipation suitable for following type of applications with chamber

and heavy duty cover.(approved make OEM has to submit test

certificate) & having back filling compound of (B) Inner chemical

(CCM Compound)- Resistivity:- 0.2 / meter testing as per IEC

62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar

content:- <2%(C) Back fill Compound :- Earthing compound should

be capable to retain moisture for long time Necessary test report must

be submitted. (b)For Electrical installation up to 11 KV in normal

Length of Pipe : 2.00 mtrs

Back filling Compound :1 no. Bag of 25 Kg.

Supplying & erecting earth pit of minimum bore dia.150mm size

approved make Earthing Electrode consisting Pipe-in-Pipe

Technology as per IS 3043-1987 made of corrosion free hot dipped

G.I.Pipes having Outer pipe dia of 50mm having 80-200 Micron

galvanising, Inner pipe dia of 25 mm having 200-250 Micron

galvanising, connection terminal dia of 12mm with constant ohmic

value surrounded by highly conductive compound with high charge

dissipation suitable for following type of applications with chamber

89 and heavy duty cover.(approved make OEM has to submit test 2.00 4591.46 Each

certificate) & having back filling compound of (B) Inner chemical

(CCM Compound)- Resistivity:- 0.2 / meter testing as per IEC

62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar

content:- <2%(C) Back fill Compound :- Earthing compound should

be capable to retain moisture for long time Necessary test report must

be submitted. (a) For Electrical Installation up to 440V in normal soil

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

90 Providing and erecting Annealed bare Copper wire 8 to 16 SWG. 1.00 794.87 Kg.

Providing and erecting Pipe type earthing having 150 cms.long and

2.5 cms. dia. galvanised iron pipe with coupling and buch buried in

specially prepared earth pit complete with necessary 8 SWG earth

92 For using salt and charcoal / coke as required for pipe type earthing. 2.00 171.70 Each

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable

multistrand / Solid Aluminium conductor for 1.1 KV. to be laid on

wall with necessary clamps or in existing trench / pipe of following

size of cables (b) 4 core 6 Sq. mm

Providing & laying approved make Double walled corrugated pipes

(DWC) of polyethylene(conforming to IS 14930 II )with necessary

94 connecting accessories of same material at required depth in existing 75.00 62.62 Rmt

trench for laying of cable. below ground / road surface for enclosing

cable (A)50 mm outer dia

Providing & laying approved make ISI marked Rigid PVC pipe

having 6Kg / cm2 (Class-3) to be erected at road crossing on or floor

as directed for laying of cable. The pipes as following size of dia &

weight per 6 mtr. (B) 50 mm inner Dia. (2.5Kg/6RMT)

Supplying & erecting approved make LAN cable of following size in

existing pipe as per direction [C] CAT -

Description Of Item Quantity Rate Unit Amount

Supplying and erecting Flexible PVC insulated multi strand multi

97 core 1.1 kv grade ISI marked copper wires of following size to be 225.00 22.22 Rmt

erected as directed. b) 1.00 Sq.mm twin twisted

Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm

& earth wire of 1.5 sq.mm (green) both are of .ISI marked 1.1 KV

grade FRLS PVC insulated multi strand copper wires erected in

below type of pipe with 6A Modular type switches and following

type of accessories erected on PVC / Metallic/Wooden box, single

mounting base frame covered with textured / metallic/white front

plate modules erected on / in wall / ceiling as per pipe erected. with

necessary batten/angle holder or ceiling rose or H.D.Connector as

directed.(e) in existing pipe erected flushed on wall/ceiling complete

Supplying and erecting LED street light / Flood light fittings with

High power White LEDs wattage of 3 Watt and above assembled on

single MCPCB, efficiency more than 130 lm/w and corrosion free

High pressure die cast aluminum housing with smooth finish powder

coated and heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened glass with company

mark/name engraved or embossed 160 to 270 V,Power Factor more

99 than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio 10.00 4997.48 No.

>0.45, Luminaire efficacy> 100 lumens/watt . LED driver efficiency

> 85 %.( fittings required LM-79 & LM-80 certificates)(NOTE:

Below description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage capacity

between the ranges shown.)(A) Street Light (IP-65), Surge protection -

4KV integral and ,Light must have 440VAC line supply with over-

voltage protection.,(ii) 48 to 60 Watts,Cat-lll

providing and erecting Miniature circuit breaker single pole 0.5A to

100 2A system and having breaking capacity 10 KA to be erected in 10.00 270.68 No.

existing box. confirming to IS 8828/1996 with ISI Mark

Providing 2.5mm.thick laminated acrylic sheet to cover the fan hook

Supply of approved make FRP Pole having following specifications:

FRP Light Pole made by CNC filament winding machine using

thermoset resin polyester/epoxy resin system) having minimum 62%

glass content. The pole should be in one piece and tapered round in

shape, having smooth finish and should be totally free from corrosion

as well as non conductive & shock proof Pole should be provided

with FRP Anchor Base and it should be heavy duty, or MS Material

duly painted with Epoxy paint. Pole should be flame retardant as per

IS 6746. Resin used shall be UV resistance and pigmented. A highly

weather resistant polyurethane coating shall be applied to the pole

after applying suitable primer system that ensures proper adhesion of

102 the paint. Minimum coating thickness shall be 80 to 100 micron. 10.00 8252.71 Each

Deflection of the pole shall not exceed more than 10% of the length

of pole for the given load“ Pole should be generally made as per the

dimensional data, performance criteria and some interchangeability

features of poles as per standard ANSI C 136.20 latest version or

ASTM D 4923/01 including cable termination box with necessary

accessories . The size of pole and type of installation with foundation

as per manufacturer details and site requirement are as below .(3)

Suitable for direct grouting & Single arm Bracket. [D] Overall length

of 5 Mtr. Average Thickness: 7mm.

Top/ Bottom OD Dia: 90/145 mm ± 3mm approx. approx. Weight of

Pole 25 kg approx.

Providing Aluminium arm bracket of having 2 sets of suitable SS304

103 hardware for fixing the brackets & spread of 1.2 Mtr (Suitable for 89 10.00 2234.12 No.

to 114 mm pole top dia) (A) Single arm bracket

Providing Aluminium arm bracket of having 2 sets of suitable SS304

104 hardware for fixing the brackets & spread of 1.2 Mtr (Suitable for 89 5.00 3450.16 No.

to 114 mm pole top dia) (B) Double arm bracket bracket

Description Of Item Quantity Rate Unit Amount

Supplying & erecting approved make SMC press moulded composite

FRP. loop-in, loop-out approx. 2mm thick box complete with

Bakelite connector strip 5way(3P+N+E),DIN rail for mounting mob

105 & hinged doors as per requirement having locking arrangements with 10.00 515.10 No.

mounting clamp with nuts, bolts & washers suitable for erection on

pole with cable clamps& earth bolt of following size of box. (B)

250mm x 200mm x 100mm [deep]

Providing 1:2:4 cement concrete foundation & 70 % PCC from

bottom including excavation for the pole of size 45 x 45 x 100 cm.

Deep in below ground level with plinth of 45 cm x 45 cm (or 45 cm

dia x 45 cm) high upper ground level with necessary curing and

finishing in approved manner.

( for 4 & 6 mtr pole)

Supplying & erecting Amplifier having following specification:

Power Output :250W (RMS) (300W Max.)

inputs : 6 Misc. & 2 Aux.

frequency Response :50-1500HZ I3db

Tone Controls :Cut & Boost type

LED Meter :5 LED Arrays

The amplifier suitable to operate 240V A.C.& 24volt D.C. (Battery)

with automatic changeover from AC to Battery operation, duly

protected by wrong Battery Polarity connections. [[Approved by

Competent Authority i.e. not Below the rank of Executive Engineer ]

Supplying & erecting recess wall mounting speaker with 5W rated

input power 3.3 K. Ohms / 3W impedance, 100 - 10000 Hz

108 frequency response with 6 inch dia. cone type 8 ohms speakers duly 15.00 591.86 No.

fitted in ABS plastic cabinet of colour match with wall or ceiling of

following size. (b)Square shaped 260 x 260mm size speaker

Supplying, installing and testing approved make microphone for All

purpose, with frequency response of 100 - 11000 Hz, having

sensitivity 2.2mv / Pa & impedance 500 Ohms (LO- Z) supplied with

quick detachable holder, 6 mtr twin core cable & 3 pin XLR

connector. [[Approved by Competent Authority i.e. not Below the

rank of Executive Engineer ]

Providing and erecting water cooler having storage capacity 80Ltr. &

cooling capacity 40 Ltr.per hour @ an ambient temp of 45˚ C. The

outlet temp. of the water should drop by 15˚ C within a hour, The

water cooler should be comprising of hermetically sealed compressor,

fan motor, condensing unit, water tank surrounded by evaporating

coil, thermostats, relay etc. complete with necessary inlet & outlet

connection. The body of water cooler will be made from Stainless

Providing & erecting water cooler having storage capacity 150 Ltr. &

cooling capacity 150 Ltr.per hour @ an ambient temp of 45˚ C. The

outlet temp. of the water should drop by 15˚C within a hour, The

water cooler should be comprising of hermetically sealed compressor,

fan motor, condensing unit, water tank surrounded by evaporating,

coil, thermostats, relay etc.complete with necessary inlet & outlet

connection. The body of water cooler will be made from Stainless

Supplying & erecting 5 stage single reverse osmosis water

purification system with M.S. powder coated frame, prefilter housing

with 'O' ring presediment filter GAC filter, carbon filter suitable

112 buster DC pump capacity 80 psi, mention with 40 psi inline type post 2.00 15620.66 No.

carbon filter auto low & high pressure switches with following size of

storage tank & LPH capacity & erected as directed ,[B] 25 Ltr / Hr

with 30 Ltr. Storage Tank

Supplying & erecting 5 stage single reverse osmosis water

purification system with M.S. powder coated frame, prefilter housing

with 'O' ring presediment filter GAC filter, carbon filter suitable

113 buster DC pump capacity 80 psi, mention with 40 psi inline type post 1.00 29187.99 No.

carbon filter auto low & high pressure switches with following size of

storage tank & LPH capacity & erected as directed [C] 50 Ltr / Hr

with 150 psi 2 nos booster pump

114 Major Repair of Doors and Windows 405.00 721.14 No.

Description Of Item Quantity Rate Unit Amount

I/We am/are willing to carry out the work at………………….% above/below percent

(Should be written in figures and words) of the estimated rate mentioned above.

Amount of my /our tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct……………………… % below Deduct……………………… % Above

In words In words