Loading
Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹70,700
Closing Date
22 Sept 2026, 4:00 pm
Karnataka Power Corporation Limited
EE PURCHASE
Procurement of spares for periodic maintenance of BFP Main Pumps of Model FK-6D-30 of Units 5 to 8
KPCL/2026-27/IND2572/CALL-2
KPCL/2026-27/IND2572/CALL-2
Open
Two Tender Document System(Two Cover)
KPCL Executive Engineer Purchase Office RTPS Raichur
7 documents required · 4 mandatory · 3 optional
A) For Manufacturers: The intending bidder shall have successfully supplied spares for Boiler Feed Pumps, Model : FK-6D-30 to any thermal power plant of capacity not less than 210MW of value not less than Rs. 24.58 lakhs (Rs. 12.29 lakhs for Micro and small Enterprises) in any one year of the preceding three financial years i.e. 2023-24, 2024-25 & 2025-26 (2 year for Micro and small Enterprises i.e. 2024-25 & 2025-26). As a proof purchase order (PO) copies (Single/Multiple (max.3)) for any one of the said financial year during which supplies are made shall be uploaded. B) For Authorized representatives / dealers / Suppliers : The intending bidder shall have successfully spares for Boiler Feed Pumps, Model : FK-6D-30 to any thermal power plant of capacity not less than 210MW of value not less than Rs. 9.22 lakhs in any one year of the preceding three financial years i.e. 2023-24, 2024-25 & 2025-26.
The intending bidder shall be Manufacturer / Authorized dealer / Supplier of spares for Boiler Feed Pumps, Model : FK-6D-30 of 210MW or above capacity thermal power plant.. As a proof bidder shall upload valid registration certificate / dealership certificate issued by the Competent Authority / relevant documents in e-portal.
The average annual financial turnover of the tenderer should be not less than Rs. 30.73 lakhs (Rs. 15.36 lakhs for Micro and small Enterprises) during the last 3 preceding financial years (last 2 preceding financial years respect to Micro and small Enterprises). As a proof the bidder shall upload the certified copy of the Annual turnover certificate / Profit & Loss statement duly certified by the Chartered Accountant.
₹500
₹70,700
22 Sept 2026
4 Sept 2026
23 Sept 2026
15 Sept 2026
Sl. No. Item Code Item Name Unit Qty Item Specifications Brand Offered Bidders Compliance GST% included in quoted rate HSN Code
1 544010702R OIL GUARD P.NO.02. SETS 20 OIL GUARD P.NO.02.BHEL MAKE BOILER FEED PUMP,MODEL FK-6D-30.DRG.NO:0180-005-4002.MATERIAL: BS-1400 LB 21SET=2NOS.
2 544010704R JOURNAL BEARING P.NO.04. NUMBERS 13 JOURNAL BEARING P.NO.04."BHEL MAKE BOILER FEED PUMP,MODEL FK-6D-30.DRG.NO:0180-005-4002.PART NO:04 MATERIAL:WM/MS"
3 544010709R BACK UP SEAL NUMBERS 12 BACK UP SEAL"BHEL MAKE BOILER FEED PUMP,MODEL FK-6D-30.DRG.NO:0180-005-4002.PART NO:13 MATERIAL:PTFE"
4 544010710R O' RING P.NO.10. NUMBERS 27 SPARES REQUIRED FOR BFP MODEL FK-6D-30. OF UNIT 5,6&7Water jacket O-ring insidePART NO:10SIZE:0.139"X7.484" ID For Pump casing/Suction guide of BFP U- 5 TO 7Material - VITON 700: Shore A Hardness 70-75deg.: Tensile strength-115kg/sq.cmElongation at Break-180% min. : Compression set-24Hr./200deg.C;15% min.
5 544010712R `O' RING P.NO. 12 NUMBERS 17 SPARES REQUIRED FOR BFP MODEL FK-6D-30.Water jacket O-ring outsidePART NO:12SIZE 0.139"x7.734"Viton Rubber "O" Ring of Material : Viton 700, Shore Hardness : 70-75deg, Tensile strength : 115Kgs/Cm2 Minimum, Elongation at break : 180% Mimnimum, Compression at : 24 Hrs/200deg, C - 15% Maximum.
6 544010733R BALANCE DRUM NUT. NUMBERS 1 BAL.DRUM NUT M100X2 "BHEL MAKE BOILER FEED PUMP,MODEL FK-6D-30.U#5,6,7DRG.NO:0180-005-4002.PART NO:33MATERIAL:BS 2872-CA 104."
7 544010737R GLACIER THRUST BRG NUMBERS 2 GLACIER THRUST BEARING PART NO:47 "BHEL MAKE BOILER FEED PUMP,MODEL FK-6D-30. FOR U#5,6,7DRG.NO:0180-005-4002.PARTNO:47MATERIAL:TY 8159 2KP 2KP."
8 544010744R OIL THROWER NUMBERS 4 OIL THROWER3Nos=1Set"BHEL MAKE BOILER FEED PUMP,MODEL FK-6D-30. FOR U#5,6,7DRG.NO:0180-005-4002.PARTNO:47MATERIAL:BS 970 431 529.SET=3NOS"
9 544010749R THRUST COLLAR NUT P.NO.49 NUMBERS 1 THRUST COLLAR NUT P.NO.49BHEL MAKE BOILER FEED PUMP,MODEL FK-6D-30. FOR U#5,6,7DRG.NO:0180-005-4002.PARTNO:49MATERIAL:BS 2872 CA 104
10 544010754R COPPER COATED GASKET OF BFP NUMBERS 3 COPPER COATED GASKET OF BFPSPARES REQUIRED FOR BFPMODEL:FK-6D-30,MS/CU,BHEL DRG NO:0180-005-4002 PART NO:68
11 544010756R THRUST COLLAR PART NO.56. NUMBERS 2 THRUST COLLAR PART NO.56.BHEL MAKE BOILER FEED PUMP,MODEL FK-6D-30.DRG.NO:0180-005-4002..PART NO:56MATERIAL:EN 24 U
12 544010759R TAPPER DOWEL PIN, 12MM SETS 13 TAPPER DOWEL PIN, 12MM"SET OF DOWEL PINS BHEL MAKE BOILER FEED PUMP,MODEL FK-6D-30.FOR U#5,6,7 PART NO:76DRG.NO:0180-005-4002.MATERIAL:BS:4439-8.8 1SET= 2 NOS"
13 544010767R `O' RING P.NO.67. NUMBERS 36 BFP MAIN PUMP DISCHARGE SIDE O-RING P.NO-67.SPARES REQUIRED FOR BFP MODEL FK-6D-30.FOR U#5,6,7SIZE 0.275" x 18.975" For casing /discharge cover of BFP U- 5 TO 7Material - VITON 700: Shore A Hardness 70-75deg.: Tensile strength-115kg/sq.cmElongation at Break-180% min. : Compression set-24Hr./200deg.C;15% min.Size - Inside dia.X crosssection
14 544010771R LOCKING SCREW (IMPELLER) SETS 17 LOCKING SCREW (IMPELLER)BHEL MAKE BOILER FEED PUMP,MODEL FK-6D-30.DRG.NO:0180-005-4002.1Set=33Nos.
15 544010772R O RING & BACK UP RING SETS 6 O RING & BACK UP RINGBHEL MAKE BOILER FEED PUMP,MODEL FK-6D-30.FOR U#5,6,7DRG.NO:0180-005-4002. PART NO 13& 14
16 544010773R THRUST BRG.SPLIGT OIL SEALRING SETS 1 THRUST BRG.SPLIGT FLOATING OIL SEAL RING"BHEL MAKE BOILER FEED PUMP,MODEL FK-6D-30.PARTNO46DRG.NO:0180-005-4002.MATERIAL: BRONZE 1SET = 2halves"
17 544010775R BREATHER 1/4" NPT P.NO.75. NUMBERS 30 BREATHER 1/4" NPT "BHEL MAKE BOILER FEED PUMP,MODEL FK-6D-30.DRG.NO:0180-005-4002.P.NO.75.MATERIAL: STEEL. CR.PLATED"
18 544010776R SPRING ,DISC. NUMBERS 2 SPRING ,DISC.BHEL MAKE BOILER FEED PUMP,MODEL FK-6D-30.DRG.NO:0180-005-4002.PART NO:30:MATERIAL: FV 520 B
19 544010778R THRUST PADS WITH RTD HOLES. SETS 32 THRUST PADS WITH RTD HOLES.BHEL MAKE BOILER FEED PUMP,MODEL FK-6D-30.DRG.NO:0180-005-4002.THRUST PADS FOR GLACIER THRUST BEARING1SET=16NOS.
20 544010779R BFP THRUST PADS NUMBERS 32 BFP THRUST PADSBHEL MAKE BOILER FEED PUMP FK-6D-30 MODEL U#5,6,7DRG.NO:0180-005-4002THRUST PADS WITHOUT RTD HOLESFOR GLACIER THRUST BEARING.
21 544010782R 'O' RING 0.139"X7.484" NUMBERS 36 'O' RING 0.139"X7.484"SPARES REQUIRED FOR BFP MODEL FK-6D-30.WATER JACKET O-RING NDE.SIZE 0.139"x7.484".PART NO: 10Viton Rubber "O" Ring of Material : Viton 700/FLUORO CARBON, Shore Hardness : 70-75deg, Tensile strength : 115Kgs/Cm2 Minimum, Elongation at break : 180% Mimnimum, Compression at : 24 Hrs/200deg, C - 15% Maximum.
22 546010704R JOURNAL BEARING OF BFP NUMBERS 4 Spares for BFP FK6D30 MODELJOURNAL BEARING OF BFP
23 546010709R O-RING 0.139''X7.734''ID SPA NUMBERS 14 O-ring 0.139''X7.734''ID SPARES FOR BFP FK6D30 PUMP SPARESHO PO Serial Number1
24 546010737R CASING STUD M48 SPARES FOR B NUMBERS 4 Casing Stud M48 SPARES FOR BFP FK6D30HO PO Serial Number7
25 546010740R THRUST BEARING OF BFP NUMBERS 1 Spares for BOILER FEED PUMP OF UNIT-8MODEL: FK6D30 MICHELL THRUST BEARING:DOUBLE TILTING PAD TYPEOMEGA 08040 NFR-L/HB1DRAWING NO.IS/1/221354
26 546010741R THRUST PAD SET FOR BFP SETS 1 Spares for BOILER FEED PUMP OF UNIT-8MODEL: FK6D30 THRUST PAD SET FOR MICHELL THRUST BEARING:DOUBLE TILTING PAD TYPEOMEGA 08040 NFR-L/HB1(Sector shap pads)DRAWING NO.IS/1/2213541 SET=16 NOs.
27 546010769R O-RING 0.139''X7.984''ID SPA NUMBERS 6 O-ring 0.139''X7.984''ID SPARES FOR BFP FK6D30HO PO Serial Number16
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Special Conditions.docx
Others - Special Conditions • 0.02 MB
declaration certificate.doc
Others - Declaration Certificate • 0.02 MB
PQR Conditions.docx
Others - PQR Conditions • 0.01 MB
Technical Specification.xlsx
Technical Information / Worksheet • 0.17 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .