Const. of Malaria Office Bldg. in the campus of Civil Hospital Sec-6 Panchkula (Pdg 11 Kv Sub Station ) (Recall)

Amount

[20.84]Providing and fixing of insulated rubber matting suitable for 11 KV installation 1 M x 2 M x 12 mm thick (IS code 15652-40091) as per specification complete and as per directions of Engineer-in-charge

[20.86]Supply, erection, testing and commissioning of G.O. Switch two poles, with blade, pin 6 insulators operating handle with GI pipe 25 mm class B complete in all respects.

[23.23.6..2]MISCELLANEOUS 6..2. Supply and erection of MS cable tray , duly pained as required including erection of the same on wall or ceiling with necessary fixture and other material required to complete the job in all respect up to the entire satisfaction of Engineer-in Charge of the work. MS perforated cable tray painted with powder coating 200 X 50 X 2 mm

[23.24.1]MS STAND, BUS BAR CHAMBER AND PANELS 1. Supply and erection of M.S. angle iron frame duly welded for housing M.S. sheet & main switches etc. on it, fixed on wall by means of suitable size of rag bolts with cement concrete, duly painted with three coats of approved paint including one coat of red oxide.

[24.1.10]EARTHING AND LIGHTENING ARRESTOR 10. Providing and fixing 25 mm x 5mm copper strip on surface or in recess for connections etc. as required with all labour and material.

[24.1.13]EARTHING AND LIGHTENING ARRESTOR 13. Providing and fixing 4.00 mm dia G1. Wire on surface or in recess for loop earthing as required.

[24.1.3]EARTHING AND LIGHTENING ARRESTOR 3. Earthing with G.I. earth plate 600 mmx 600 mm x 6 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) complete as required.

[24.1.4]EARTHING AND LIGHTENING ARRESTOR 4. Earthing with tinned copper earth plate 600mmx600mmx3mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) etc. complete as required.

[24.1.5]EARTHING AND LIGHTENING ARRESTOR 5. Extra for charcoal or coke and salt for G.I. plate or copper plate earth electrode.

[24.1.7]EARTHING AND LIGHTENING ARRESTOR 7. Supplying and laying 25mm x 3 mm G.I. strip in 40 mm dia,GI pipe as/from earth electrode including soldering etc. as required.

[24.1.8]EARTHING AND LIGHTENING ARRESTOR 8. Providing and fixing 25 mm x 3mm G.I. strip on surface or in recess for connections etc. as required with all labour and material.

[24.1.9]EARTHING AND LIGHTENING ARRESTOR 9. Providing and fixing 25 mm x5 mm copper strip in 40 mm dia G.I. pipe from earth electrode as required.

[24.2.7.5]LT CABLE 7.5. Supply and erection of suitable compression type brass cable glands for underground Cable :- 120 sqmm to 185 sqmm Cable 3 to 32 Core

[24.2.8.10]LT CABLE 8.10. Supply and erection of aluminium lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work. 120 sqmm

[24.3.6.1]HT CABLE 6.1. Supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 33 KV grade as required :70 to 95 sqmm

[24.3.7.1]HT CABLE 7.1. Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 33 KV grade as required : 70 to 95 sqmm

[24.5.2.6]MISCELLANEOUS ITEMS 2.6. S/E mark double walled corrugated (DWC) HDPE, pipe 10 Kg/Cm2 ,laid 0.75 Metre below ground level including digging and refilling of earth including cost of suitable size socket/coupler for HDPE pipe including the cost of labour and material required to complete the job in all respect up to the entire satisfaction of Engineer in charge of the work. DWC/HDPE pipe 145/123 mm outer dia/ inner dia

S/E/T/C of lighting arrestor model ISI Marked suitable for 11KV 3 Phase 50 HZ ground neutral system comprising of spare gape type queen gap type in series with non linger resistar element house in Horizontally scale poreclam bushing with line and ground terminal along with mounting clamps conforming to ISS 3070 (Part-I) of 1985 with latest amendment with all labour and material required to the complete in all respect up to entire satisfaction of the Engineer-in-Charge of the works.

Supply and Erection MS bucket stand which including cost of 3 nos. buckets of 9 liter capacity with sand filling including cost of welding and painting of complete stand and buckets with one coat of red oxide and two coats of approved paint of red colour with all labour and petty material to complete the job in all respect upto the entire satisfaction of Engineer-in-charge of work.

Supply , Erection , testing and comissioning of 11 KV outdoor HT Metering panel complete with CTs , PTs cubical and electronics Meter with accuracy class 0.2 as per requirement / approved by UHBVN. Panchkula alongwith CC foundation 300mm above ground level and outer housing of 2mm thick CRCA Sheet complete and Required size of Foundation and Shed for outer cover of Size 10Ftx9Ftx9Ft in all respect upto the entire satisfaction of Engineer -in Charge of work.

S/I/T/C of Stey Set for GO Switch complete in all respect i/cost of Disc insulator etc. upto the entire satisfaction of Engineer -in Charge of work.

SITC of GI Fancing 7.5 Feet High From Finish Floor Level supported with GI Angle/ Channel complete in all repect upto the entire satisfaction of Engineer -in Charge of work.

Supply and Erection of PCC Pole 9 Mtr. Long 105mm*115mm at top and 105mm*315mm at bottom Make as per UHBVN

Supply and Erection of PVC insulated aluminium armoured cable 120Sqmm x 3.5 Core 1100 Volts grade to including all labour and petty metrial required to complete the job in all respect up to the entire satisfaction of Engineer in Charge of work. Make Havell`s / R.R / Polycab / KEI

Supply and Erection of PVC insulated aluminium armoured HT cable 50 Sqmm x 3 Core 1100 Volts grade to including all labour and petty material required to complete the job in all respect up to the entire satisfaction of Engineer in Charge of work. Make Havell`s / R.R / Polycab / KEI

Supply, installation, testing and commissioning of 11KV Oil type Outdoor type transformer 250 KVA capacity, 3Phase, 50Hz alongwith spefication i.e. Copper Double Wound, Oil Immersed, Naturally Cooler, Core type Transformer confirming to IS : 1180 L-2 Hybrid Insulation, with Latest efficiency level with first filling of Oil as per IS : 335. Output- 250VA, No load voltage ratio at rated voltage and frequency - 11 / 0.433 KV, Cooling type- ONAN, Off Load tap changer, taping range and step (Plus/ Minus/ Step) - (5%/ -10%/ 2.5%), vector group- Dyn-11, Temp rise at rated load on Ambient- 50 Deg C, Paint Shade to IS : 5 (Epoxy) alongwith rating and diagram plate, earthing terminal (2Nos.), lifting lugs, air release hole with plug, dehydrating silica gel breather, magnetic oil level guage, oil filling hole with plug on conservator, oil conservator with drain plug, thermometer pocket, jacking lugs, bottom drain cum filter valve, top flter valve, 4Nos. bi directional rollers, explosion vent with diaphram, marshelling box, 100mm OTI with alarm and trip, WTI with alarm and trip, buchholz relay with alarm and trip, shutt off valves for buchholz relay (2Nos.) Magnetic Oil level gauge, Radiator - fixed and cable box - HV/ LV side and Required size of Foundation to complete in all respect upto the entire satisfaction of Engineer- in- charge of work. Make as per approved list

M R CONSTRUCTION COMPANY

M/S GARG ELECTRICAL

M/s JSB Enterprises

Som Nath Contractor