PROVISION OF FAMILY WELFARE CENTRE AT MIL STN GANDHINAGAR

Amount

Materials and labour for carryout soil investigation / testing profiles/ proportion to determine safe bearing capacity of sub soil by conducting bore holes 150 mm dia (STP) in sub soil strata down to 10 metres depth of refusal whichever is encountered earlier inclusive field and lab investigation according to relevant specification of IS:2131, IS: 6403, IS: 1498 and IS: 2720:- (a) Mobilization of equipment and personel to proposed site shown and back (b) Collection of disturbed and undisturbed soil sample from various level of sub soil strata. (c) Sub soil penetration resistance characterstic which have been determined in situ (d) Conduction laboratory test on settled sample for different engineering properties: (i) Grain size analysis incl classification of soil (ii) Bulk and dry density (iii) Moisture content (iv) Liquid and plastic limits (Atterbergs Limits) (v) Shear tests (vi) Specific gravity (vii) C and φ value (viii) Settelments details (e) Recording ground table (sub soil water level) if observed upto exploration, max and min depth of water table, effect of sub soil water on foundation to be intimated. (f) Hyderometric test sieve analysis and index properties (g) Any other recording of relevent property not mentioned above effecting the structural stability if noticed. (h) Preparation, submission of technical report of copies alongwith recommendations of SBC of soil for proposed Bldg/structure at 1m below GL and thereafter at every 0.5m interval. (j) The Test shall be conducted as per Indian Standard codal provision. The rate include preparation and submission of the comprehensive technical report giving complete record of Investigation and calculation of Modulus of Subgrade reaction of the soil. The rates will also include excavation and back filling of pit., leading, unloading of kentledge material and removal of kentledge material after ascends, descends, crossing of tracks/nallah with all labour, material,tools plants and machinaery. complete as specified and directed Note : (i) Soil Investigation shall be executed by MES enlisted consultants only. (ii) Item Nos 02 to 126 shall be executed after completion and submission of Soil Investigation report of item No. 1

NOTE :- Item No. 2 to 105 shall be executed for construction of Family Welfare Centre at Mil Stn Gandhinagar all as specified in drawings and complete all as specified and directed. Surface dressing not exc 15cm deep in soft/loose soil complete all as specified and directed by Engr-in-Charge. Note : Removing of vegetation / shrubs / brushwood / undergrowth and carrying away rubbish to a distance of 50 m deemed to included in quoted rate.

Surface excavation not exc 30cm deep and averaging 15cm deep and getting out in soft / loose soil.

Earth work in excavation by mechanical means (Hydraulic excavator) means over areas (exceeding 30 cm in depth, not exc 3.00 mtr in width including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m, as directed by Engineer-incharge

Earth filling under floors including spreading, leveling, watering and well ramming in each layers not exc 25 cm thick complete all as specified and directed. Note :- Soil obtained from excavation under item 3.00 & 4.00 here-in-before shall be used for filling.

Returning, filling in, including spreading, leveling watering and well ramming in layers not exc 25cm in soft / loose soil complete all as specified& directed by Engr-in-Charge.

Removing excavated material exc. 250 m but n exc. 500 m and depositing where directed

M&L for hardcore of broken stone or boulders, gauge not exc. 63mm, deposited, spread and leveled in layers not exc 15cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for PCC 1:4:8 type D2 using 40 mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and directed.

M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work, vertical or to batter for rough finished flat surfaces of concrete complete all as specified and directed.

M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work, vertical or to batter for rough finished curved/circular surfaces of concrete complete all as specified and directed.

M&L for formwork to sides and soffits of floor or roof beams, beam haunching, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for rough finished flat surfaces of concrete complete all as specified and directed.

M&L for form work to sides of Pillars, posts, struts piers, columns etc in squarre, rectangular or polygonal, rough finished surfaces of concrete complete all as specified and directed.

M&L for form work to sides of Pillars, posts, struts piers, columns etc in Circulation on plan rough finished surfaces of concrete complete all as specified and directed.

M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exc 200mm thick (horizontal or sloping) for rough finished flat surfaces of concrete complete all as specified and directed.

M&L for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs not exc 20cm wide and sides of RCC / PCC bands in walls, horizontal or sloping and similar work exc 10cm but not exc 20cm wide for rough finished surfaces of concrete complete all as specified and directed.

M&L for formwork to chajjas, chullah hoods, troughs and similar items including edges for rough finished flat surfaces of concrete complete all as specified and directed.

M&L for reinforced cement concrete M-25 (Design mix) using 20mm graded crushed stone aggregate in foundations including rafts, footings, foundation beams,plinth beams, bases for columns, mass concrete and the like. Note :- Reinforcement & formwork shall be measured and paid for separately.

M&L for reinforced cement concrete M-25 (Design Mix) using 20mm graded stone aggregate in lintels upto 1.5m clear span, seismic and other similar bands, lintel bands and the like. Note :- Reinforcement & formwork shall be measured and paid for separately.

M&L for reinforced cement concrete M-25 (Design mix) using 20mm graded crushed stone aggregate in columns, pillars, piers, posts, struts and the like. Note :- Reinforcement & formwork shall be measured and paid for separately.

M&L for reinforced cement concrete M-25 grade (Design mix) using 20mm graded stone aggregate in slabs supported on walls, beams and columns in floors, roofs, shelves and the like. Note :- Reinforcement & formwork shall be measured and paid for separately.

M&L for reinforced cement concrete M-25 grade (Design mix) using 20mm graded stone aggregate in chajjas and the like. Note :- Reinforcement & formwork shall be measured and paid for separately.

M&L for mild steel TMT bars 10mm dia & over cut to length bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and bending with and including MS wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

M&L for mild steel TMT bars 5mm dia and over up to & including 10mm dia in stirrups, spacers & binders including cranking, bending, spirally for hooping for columns, hooking ends and bending with and including MS wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

M & L brick work with FLY ASH BRICKS {As per IS-13757 (1993) burnt clay fly ash building bricks}, (OLD SIZE BRICKS) straight or curved on plan exc 6 mtr mean radius built in cement mortar 1:6 complete all as specified and directed.

M & L brick work with FLY ASH BRICKS {As per IS-13757 (1993) burnt clay fly ash building bricks}, (OLD SIZE BRICKS) straight or curved on plan to any radius in half brick thick wall, built in cement mortar 1:4 complete all as specified and directed.

M&L for rendering 10mm thick in cement mortar 1:6 on stone masonry surfaces or surface other than fair face of brick work of walls including finishing the surface fair and even complete all as specified.

M&L for rendering 15mm thick in cement mortar 1:4 on fair faces of brick masonry or concrete surfaces of walls, mixed with water proofing admixture (ISI marked) as per manufacturer’s instructions, finished even and smooth without using extra cement complete all as specified. Note : - Supply only water proofing admixture shall be measured and paid for separately.

M&L for rendering 5mm thick in cement mortar 1:3 on concrete surfaces of ceiling including finishing the surface even and smooth without using extra cement complete all as specified.

M&L for providing cement concrete in type B0 1:2:4 (using 12.5 mm graded crushed stone aggregate) as in roof padding, laid to (consolidated thickness 65mm or less) as leveling course, laid and compacted in min slope 1:30 over roof complete all as specified& directed by Engr-in-Charge.

M&L for 15mm thick screed bed/plaster over top of roof slab/chajjas in CM 1:4 mixed with water proofing admixture (ISI marked) as per manufacturer’s instructions, finished even and smooth without using extra cement all as directed. Note : - Supply only water proofing admixture shall be measured and paid for separately.

Supply only integral liquid water proofing compound (ISI marked). Make : Pidilite (Dr. Fixit Pidiproof LW) or equivalent of Fosroc / Sika / STP

M&L for Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces complete all as specified and directed.

M&L APP based polymeric membrane minimum weighing 3 Kg/Sqm and minimum 3 mm thick reinforced with polyster non woven fabric (wt not less than 150 gms/sqm) laid on primed surface by torch application complete all as specified.

M&L for 100 mm thick PCC (1:4:8) type D2 using 40 mm graded crushed stone aggregate as in sub base, surface finished fair and even complete all as specified.

M&L for 25mm thick PCC (1:2:4) type B0 (using 12.5mm graded stone aggregate), as in sub base all as directed by Engineer-in-charge.

M&L Vetrified Ceramic tiles (1st quality) 10mm thick double charged (square/rectangular) polished, area of each tiles exceeding 0.42 sqm, but not 1.00 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match and over 15mm thick cement screeding in CM 1:6 Complete all as specified and directed by Engr-in-Charge.

M&L Vetrified Ceramic tiles (1st quality) 10mm thick double charged (square/rectangular) polished, area of each tiles exceeding 0.42 sqm, but not 1.00 sqm, in vertical surfaces as skirting and dados etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match and over 10mm thick rendering in CM 1:4 Complete all as specified and directed by Engr-in-Charge.

M&L for Non - skid Ceramic tiles (1st quality)7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and over 15mm thick cement screeding in CM 1:6 Complete all as specified and directed by Engr-in-Charge.

M&L for coloured glazed ceramic tiles (1st quality), 600mm x 300mm x 7-8mm thick on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10mm thick rendering in cement mortar 1:4 complete all as specified and as directed.

M&L for 16-18mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, windowcills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15mm thick screed bed CM 1:6 complete all as specified & directed by Engr-in-Charge.

M&L for Granite stone any description providing edge moulding to 18-20mm thick stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc. complete.

Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge Note : Glazing/penelling measured and paid saperately in respective items.

S&F anodized aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m, powder coated of any colour as approved (Thickness or powder coating not less than 50 micron) including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws, anodized aluminium fittings such as peg stays 150mm long (1 No.), hinges type B-21 100mm long (2 Nos), suitable handle (1 No.) complete all as specified & as directed. Note : Glazing/penelling measured and paid saperately in respective items.

Supply only 5mm thick Tinted Coloured glass fixed to metal frame complete all as specified and directed.

Supply only 5mm thick Froasted glass in squares n exc 0.5 sq. m each pane all as specified and directed by Engr-in-Charge

S&F anodized aluminium grill with power coating (minimum thickness 50 micron) of approved pattern and fixed to the existing window/ventilator frame with CP brass/stainless steel scrwed @ 200mm center to center, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening all complete as per requirement & directed by Engr-in-Charge.

S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples & scrwed complete all as specified and directed

M&L Solid PVC Double door frame of size 50mm x 95mm made out of 5mm wood grain printed PVC sheet used instead of Plain colour PVC sheet reinforced with M.S. tube, suppling & fixing in opening as per specification & drawing

S&F Factory Made Solid PVC Moulded Door Shutter with particle board , 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face supplying & fixing in frame at site as per specification & drawing

Supply and fixing stainless steel hinges 100mm long medium weight to pressed steel/angle iron frames by welding/screws all as specified.

S&F aluminium anodised barrel tower bolt 150mm size extruded section, ISI marked & fixed

S&F extruded aluminium alloy handles 150mm size fabricated type anodised. ISI marked.

S&F 12mm thick toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling, holes required.

S&F Heavy Duty Stainless Steel Cylinder Floor Spring Set for Doors, Wooden Glass Aluminum Doors , Glass doors Floor Spring, Top Patch, Bottom Patch,Top Patch Pivot(Glass Door with Weight Upto 90 KG(Silver)Set of 1 ,this Glass Door Floor Spring is a door closer device, which is installed together with the bottom of the door leaf to let the door close automatically,the connector is compatible with most of the mechanisms and doors. Size of the female connector (width x depth x height): 22 x 11 x 13 mm,Top and Bottom Patch Pivot, made of metal, with Stainless Steel profile with matt polish. Compatible with glass doors of thickness 10-12mm,Packaging for 1 set Glass Door Floor Spring, 1 set Top Patch Pivot, 1 set Bottom Patch Pivot, 1 pcs top Patch Patti, accessory that is fixed to the lower corner of the door and that is connected (fits) directly to the automatic door closer to the floor with accessories required for installation, smooth opening and closing, suitable for use in different environments complete all as specified and directed.

S&F for 25mm dia harrison rails,stainless steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified and directed.

M&L for 50 mm thick PCC 1:3:6 type C1 using 40 mm graded crushed stone aggregate as in plinth protection surface finished fair and even complete all as specified. Note :- Plinth protection shall be of width as directed and shall be laid to slope of 1:30 in alternative bays not exceeding 3 meter in length. Joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and same shall be filled with bitumen mastic (1:3).

Supplying and laying of 16mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

Supplying and laying of 25mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

Supply and fixing 500 Litre capacity Rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete as specified in SSR Part-I

S&F Ball brass valve, high pressure, with polythene float and flynut complete, screwed for iron pipe 20mm bore or brass ferrule and fixed complete all as specified and as directed.

S&F PVC connection 600 mm long suitable for 15 mm bore GI pipe including PTMT nuts on both sides complete all as specified.

S&F 32mm dia Brass chromium plated bottle traps for wash basins/urinals with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed Complete all as specified

S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified. Note :- Excavation & earthwork shall be measured & paid for separately.

S&F 110 mm bore PVC (SWR) bends any radius complete all as specified.

S&F 110 mm bore PVC (SWR) single junction (single 'T' ) equal or unequal with access door complete all as specified.

S&F 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls

S&F 110mm bore PVC (SWR) vent cowl complete all as specified.

S&F PVC (SWR) floor trap plain with PTMT grating including jointing with solvent cement, diameter of outlet 75mm, complete.

M&L for Providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified.

M&L for Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, wall and ceiling of required shade and colour complete, as per manufacturer's specification. Two or more coats on new work complete all as specified.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.

M&L for cement concrete 1:2:4 type B0, using 12.5mm graded crushed stone aggregate as in copings and the like including weathering, slightly rounded, chamfered angle and throating as directed including use and waste of form work (straight or curved) all exposed surface of concrete finished fair complete all as specified and directed.

M&L for for PCC 1:2:4, type B-1 using 20mm graded crushed stone aggregate as in water through, surface channels and drains including necessary formwork, complete all as specified and directed.

M&L for precast RCC 1:2:4 type B1 using 20mm graded stone aggregate as in cover slabs of drains, manholes etc. including placing in position and set in CM (1:4) complete all as specified and directed. Note :- Reinforcement shall be measured and paid for separately.

M&L for 150mm dia pipe concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in PCC(1:4:8) type D2 (using 40 mm graded stone aggregate)

M&L for 150mm bore reinforced concrete pipe, class NP2, laid and jointed (in CM 1:1) complete with collars complete all as specified and directed.

M&L for mild steel Round bars 10mm dia & over cut to length bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and bending with and including MS wire (annealed) not less than 0.9 mm dia complete all as specified and directed

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required for 150mm bore pipe complete all as specified and as directed.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete.

Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete.

M&L for 75 mm thick PCC 1:4:8 type D -2 using 40 mm graded stone aggregate as in sub base complete all as specified& directed by Engr-in-Charge.

M&L for Providing and laying prepolished cement concrete Chequered tiles 30cmx30cmx25mm thick, with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape heavy duty , set,jointed and pointed in neat cement slurry in floors over screed bed 15mm thick 1:6 cement mortar complete all as specified& directed by Engr-in-Charge.

S&F 32mm dia waste fitting (waste coupling) brass chromium plated for glazed ware sink, basin etc with long screwed shanks and fly nuts flange complete for the following sizes all as directed by Engr-in-charge

S&F for 16.4cmx 5.8 cmx 5.1cm Heavy Duty Stainless Steel Lock for Glass Door Thickness 10 mm to 12 mm Having 3 Ultra Keys Out Side & Knob Inside with Screws Satin Finish Pack of 1 Set (Glass to Floor, Silver) complete all as specified.

Supply and fixing Heavy duty Stainless Steel 90mm x55mm x12 mm Frameless Bracket Wall to Glass Door Hinges/Glass to Glass Door Hinges, Bathroom Shower Door Bracket Wall Mount Door Hinges - (Suitable for 10mm-12mm thick Glass door incl all necessary accessories complete all as specified.

S&F 25mm dia and 16 gauge thickness Stainless steel Chrome glossy finish toughened glass door handles 305mm long complete all as specified and directed.

S&F 15mm bore angle cock with flange, cast copper alloy, chromium plated, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron/cpvc pipe or for unions. Make : Prayag ,Cat Part No. 9810, Jaquar or equivalent

S&F 15 mm bore fancy bib cock long Nose with wall flange , cast copper alloy, screwed down, screwed for iron/cpvc pipe or for brass ferrule & fixed complete all as specified and directed Make : Prayag ,Cat Part No. 9806, Jaquar or equivalent

S&F single lever basin mixer wall mount, cast copper alloy with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks & fly nuts, screwed for iron/cpvc pipes of 15mm bore all as specified Make : Prayag ,Cat Part No.BD-40 and BD-98 complete 9854, Jaquar or equivalent

S&F in repairs Jet spray chromium plated brass for EWC with & including PVC connection1mtr long suitable for 15 mm bore GI pipe with PTMT nut & nipple complete.

S&F for 300mm glass shelf with brass railing complete all as specified & as directed.

S&F for 500mm full glass shelf rectangular type with brass railing complete all as specified & as directed.

S&F for CP towel Ring complete all as specified & as directed. Make : Prayag Cat part No. BA-21 or Jaquar or equavalent

S&F for CP Soap dish wirh glass complete all as specified & as directed. Make : Prayag Cat part No. BA-25G or Jaquar or equavalent

S&F for CP Towel Rack wirh lower hanger complete all as specified & as directed. Make : Prayag Cat part No. BA-03 or Jaquar or equavalent

S&F for CP Soap dispenser holder complete all as specified & as directed. Make : Prayag Cat part No. BA-83 or Jaquar or equavalent

S&F for CP toilet pape holder complete all as specified & as directed. Make : Prayag Cat part No. BA-38 or Jaquar or equavalent

S&F for CP Towel Rail complete all as specified & as directed. Make : Prayag Cat part No. BA-1S or Jaquar or equavalent

S&F for vitreous china counter top/down basin size 530x420x140mm rantangular shape thin Rim Table Top Basin Make : Jaquar cat part no. JDS-WHT-25907N equivalent of KOHLER / PRAYAG complete all as specified & directed.

S&F for one piece Closet with integrated cistern vitreous china wash down water closet pan , coloured, floor/wall mounted coupled closet, including connection to drain (or outgoing pipe), anti-sypohonage pipe etc, with & including WC seat cover coloured closed pattern with flat bottom and cover, vitreous china symphonic action type twin flush flushing cistern of 10 litre capacity with lid, necessary fittings complete all as specified & as directed. Make : “Diamond” of Prayag equivalent of M/S Johnson, H & R India Ltd / M/S Hindustan sanitary ware and Industries Ltd / CERA, Madhusudan Ceramic as approved by GE.

Providing and laying 100mm thick for precast SFRC drain cover without frame but including complete sides iron sheets (medium ) complying to the standard specifications as mentioned in the IS 12592 BIS Standard minimum load bearing capacity 5 ton /Sqm in square or rectangular shape complete all as specified and directed by Engr-in-Charge.

Providing and laying for Precast steel fibre Reinforced concrete RCC Soak Well Ring and size of ring 1200mm dia , 600mm height , ring wall 75mm thick complying to the standard specifications as mentioned in the IS 12592 BIS Standard circular shape complete all as specified and directed by Engr-in-Charge.

S&F for 18mm hick, PVC sheet/board one side prelaminated of approved texture as in kitchen cabinet/cupboard ( with shelves and partions) including necessary fittings & fixture like auto closing concealed hinges, 75mm long fancy SS handle, magnet catch etc as per manufacturers instructions. Make ; Rajshree/Sintex

M&L for wiring with and including multistranded copper conductor 1.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed FRLS cable 1100 Volts grade, ISI marked with valied CML number drawn in PVC Conduit concealed wiring and including medium grade PVC Conduit 20mm in size, fire resistant, ISI marked including with its fittings and fixtures such as tees, bends, elbows, junction boxes, etc. including multistranded copper conductor 1.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed FRLS cable 1100 Volts grade, ISI marked with valied CML number as continuity earth wire and including pressed steel sunken concealed terminal box with 3mm thick industrial laminated sheet cover for mounting switches, sockets and fan regulators etc. complete all as specified and directed for the following :-Note : Wiring to be connected with modular switch ,socket fan regulator etc.

One light/fan/Exhaust fan point controlled by one switch

One multi purpose socket 5 Amps, Independent board.

One multi purpose socket 5 Amps, on the same board.

M&L for wiring with and including multi stranded copper conductor 2.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed, FRLS cable, 1100 volts grade, ISI marked with valid CML number, drawing through in and including medium grade, rigid non metallic, PVC concealed conduit of 20mm bore and including cutting chases for conduits and sunken for boxes, its accessories & including with multi stranded copper conductor 2.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed, FRLS cable, green colour, 1100 volts grade, ISI marked with valid CML number as continuity earth wire terminating with provision of sunken concealed terminal boxes complete all as specified and directed. -Note : Wiring to be connected with modular switch ,socket fan regulator etc.

M&L for wiring with and including multi stranded copper conductor 4Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed, FRLS cable, 1100 volts grade, ISI marked with valid CML number, drawing through in and including medium grade, rigid non metallic, PVC concealed conduit of 20mm bore and including cutting chases for conduits and sunken for boxes, its accessories & including with multi stranded copper conductor4Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed, FRLS cable, green colour, 1100 volts grade, ISI marked with valid CML number as continuity earth wire terminating with provision of sunken concealed terminal boxes complete all as specified and directed. -Note : Wiring to be connected with modular switch ,socket fan regulator etc.

S&F, modular switch 1 way 6A, 1 module including suitable outer cover complete all as specified and directed.

S&F, modular switch 1 way 16A, 1 module including suitable outer cover complete all as specified and directed.

S&F , modular socket 6A, 2/3 pin combined, 2 module type including suitable outer cover complete all as specified and directed.

S&F, modular socket 6A/16A - 2/3 pin combined, 2 module including suitable outer cover complete all as specified and directed.

S&F Ceiling rose, PVC/poly carbonate,isolated body three terminals,complete all as specified and directed

S&F, modular fan step type regulator, 120W, 2 module including suitable outer cover complete all as specified and directed.

S &F Distribution Board VTPN 12 way, 415 volts, factory made powder coated, double door Comprisingof MCCB 125 Amp 4 Pole ,with neutral and earth link, suitable for fixing MCB,s complete includingConnectros Terminal Blocks etc all as specified and directed.

S & F MCB’s single pole, 6 to 32 Amps 240 volts with ‘C’ curve,10KA , fixed in sheet metal board complete including connecting.

S & F in MCB’s SPN 32 Amps 240 volts with ‘C’ curve, fixed in sheet metal board complete including connecting.

S&F, , LED light fitting, 1x20W, 220 V AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed

S&F LED light decorative ultra slim round profile LED lighting with extured polycarbonate enviromental friendly energy effecient ready to use 9 watt watt 220 V AC including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fix LED light fitting 1 x 10 W bulk head luminaries including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size

M & L sub-main wiring with 2 single core 6 Sqmm PVC insulated, unsheathed, 1100Volts grade, copper multi stranded conductor drawn in PVC conduit ISI marked including with its fittings and fixtures such as tees, bends, elbows, junction boxes, etc. including multistranded copper conductor 6.0 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed FRLS cable 1100 Volts grade, ISI marked with valied CML number as continuity earth wire drawn through and connected to main switch/ DB and testing on completion. Note: (i). 2 run of main conductor and one run of earth conductor shall be measured as one length.

Supply and fixing BLDC type ceiling fan 1200mm sweep, 230 Volts 50Hz, white colour, with copper winding including down rod including remote and canopy etc. including making connection with 1.5 Sqmm copper conductor cable from ceiling fan to connector complete all as specified and directed. Make : Havells/ Crompton/Panasonic

S&F Exhaust fan steelbody AC single phase.230V of size 380 mm sweep with bladeand frame and louvers Note 5 star rated , 380 mm sweep ,Suitable for 230 volt AC Supply 50 Hz with all accessories and mounting ( Louver shutter, Frame Mounting Bolts , vibration pads etc)all as per specified and directed.

Supply and fix electric water heater,storage type steel body with copper inner tank and heating element upto2 KW capacity 25 litre, BEE 5 Starrated complete with all accessoriessuch as safety valve, thermostate,NRV, connection piece etc.complete all as specified and directed

S&F, sheet metal enclosures, single pole & neutral with a two pin & earth plug and socket complete with one single pole, MCB of 20 Amps, 10 KA, 240 volts complete all as specified and directed

S& F, LED strip light rope light ac 230 volt by use of water proof in different colour as directed and fixed with adhesive material I e feviquick ,fevibond on site incl nessary adopter for connected accessories as required make approved by Engineer -in - charge

Shree Builders (BID ID -3134833)

SNEH TRADERS (BID ID -3134656)

Ramdev and Sons (BID ID -3135567)

divyarsh entrprise (BID ID -3135346)

K K Construction Co (BID ID -3132850)

Abhishek Enterprises (BID ID -3135252)

SHELDON CONSTRUCTION (BID ID -3134405)