REPAIR AND MAINTENANCE TO CERTAIN ROADS, ROAD BERMS AND ROAD FURNITURE AT KARGIL AND AF STATION LEH UNDER GE(AF) LEH

Amount

Material and labour, repair to pot holes of any depth and area not exceeding 1.0sqm each including sweeping free from dust and mud or water, scoring sunken surfaces of road, path etc cutting around edges to at least 25mm in depth, making good by applying tack coat of paving bitumen (VG-10) @ 5kg per ten sqm, putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 Kg Per 10 Sqm using VG 30 paving bitumen blinded with 0.09 Cum of stone chippling of 6.3mm size and again well rammed ( including supply of premixed macadam, binder and chippings), complete all as specified and directed.

Material and labour, Preparation of existing black top bituminous road surface by brushing with wire brushes for removing caked mud etc , sweeping with brooms and finally fanning the cleaned surfaces with mechanical air compressor to remove all loose dirts complete all as specified and directed.

Material and labour,applying evenly a priming/tack coat with paving bitumen of VG-10 @ 5kg/10 Sqm complete all as specified and directed.

Material and labour for Bituminous Premix semi dense asphaltic concrete 30 mm consolidated thickness with minimum 5.5% binder (paving bitumen of grade VG-30) content by weight of total mix, rolled and compacted with 8 to 12 ton power roller to required camber and gradient laid with mechanical paver, Complete all as specified and directed. The guidline stipulated in SSR Part-I/Morth specification shall be adhered.

Material and labour, premixed bituminous macadam using paving bitumen (VG-30 grade) @ 4% by weight of total mix laid, rolled and compacted with 8 to 12 ton power roller to required gradient & camber, consolidated thickness 75mm or less, complete all as specified and directed.

Material and labour for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like n. exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction, complete all as specified and directed.

Supply and fixing in repair, cat eye solar reflective type of metal body alloy of size 100mmx100mmx20mm with PAMA striplens reflector of model No. DA 972 fixed with and including MS stud of sutable size as per manufacturer instruction complete all as specified and directed. Make : Dark eye model No. DA 972 or equivalent in Greenlight /TATA BP SOLAR /3M

Supply and fixing in repair, solar cat eye aluminium alloy shall (100% water proofing design according to 65) of size 125mmx125mmx25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/0.3 Watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10000 to 18000 mcd completed as per manufacturer instruction complete all as specified and directed. Make : Dark eye or equivalent in Greenlight /TATA BP SOLAR /3M

Note : Schedule of credit for Rs. 6000.00 (Rupees Thirteen thousands two hundred and fifty only) to be deducted on acceptance of bid.

AMAAN ENGINEERS

KONCHOK TSEWANG