SPECIAL REPAIRS TO NINE BATHROOMS AND INBUILT FURNITURE OF 15 CADETS CABINS OF EAGLE SQUADRON BLDG NO. P 168 AT INA, EZHIMALA

Amount

SCHEDULE 'A' PART-I (B/R WORKS)

Dismantling floor, hearth or wall tiling including cement mortar bedding, removing materials and rubbish off the premises complete all as specified and as directed.

Demolition of concrete surfaces in ground floor and paving n.exc. 15cm thickness (below or above ground level) and removing material and rubbish off the premises all as specified and as directed.

Taking down aluminium shutter of any description and refixing in same position after necessary cutting, providing fixing rod, etc whatever necessary repair work to shutter for making it usable complete all as specified and as directed.

Taking down chowkhats or frames, without taking off shutters from the frame exceeding 1.5 Sqm but not exceeding 4 sqm each and removing all as directed.

Taking down chowkhats or frames, without taking off shutters from the frame not exceeding 1.5 sqm each and removing all as directed.

Taking up or down cast iron waste and vent pipes and connections, 50/100mm dia complete all as specified and as directed.

Supply and fix 30 mm thick factory made door shutter to be made with unsaturated polyster resin moulded to 3 mm FRP laminate for forming hollow rails and styles suitable treated and seasoned rubber wood are to be filled inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels with gel coat finish and with an average weight of 8 kg per sqm complete all as specified and as directed.

Supply and fix fibre glass reinforced plastic (FRP) door frame of 100mm x 60 mm thick are to be laminated with inner core of treatment and outer core of average 2 mm thick FRP with gel coat finish weighining an average of 4 kgs per mtr complete all as specified and as directed.

Supply and fix powder coated aluminium window and ventilator shutters side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and as directed by Engineer-in-Charge.

Supply and fix powder coated aluminium frame for doors, windows, ventilators, partitions etc with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed by Engineer-in-Charge.

Supply and fix powder coated aluminium door shutters, aluminium section weighing 0.55kg/m incl necessary joining cleats glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges anodised aluminium snap beaking screws etc complete all as specified and as directed by Engineer-in-Charge.

Supply and fix 6.3mm thick sheet glass ordinary quality exc 0.50 sqm in each pane and glazing with aluminium beading complete all as specified and as directed.

Supply and fix in repair aluminium wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminum staples or beading complete all as specified and as directed.

Supply and fix in repair Aluminium Composite Panel 4mm thick of any colour and shade, fixed to wooden / aluminium frame work as in door/cupboard shutters all as specified and as directed by Engineer-in-Charge.

Supply and fix 100mm mild steel butt hinges, cold rolled medium weight complete all as specified and as directed.

Supply and fix 150mm Aluminum anodised barrel tower bolts of extruded section complete all as specified and as directed.

Supply and fix 125mm extruded aluminium anodised alloy handles fabricated type complete all as specified and as directed.

Supply and fix 250 mm aluminum alloy anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy complete all as specified and as directed.

Material and lablour for plain cement concrete 1:2:4, type B1 using 20mm graded stone aggregate in roof slab padding and roof kerb preparatory to roof treatment, complete all as specified.

Material and labour for coloured Non-skid ceramic tiles 600x 600x7 to 8 mm thick fixed on floors with approved tile adhesive & provided with 4mm spacer , spacer gaps to be filled with approved epoxy complete all as specified and as directed by Engineer- in- Charge. NOTE: Epoxy shall be filled to the full depth/thickness of tiles.

Material and labour for Glazed ceramic coloured tiles in vertical surfaces 600x300x7 to 8 mm thick , fixed on walls with approved tile adhesive & provided with 4mm spacer , spacer gaps to be filled with approved epoxy complete all as specified and as directed by Engineer- in- Charge. Note: The ends of corner tiles at all horizontal and vertical joints shall be mitered/ provided with PVC corner strips whichever found aesthetic and approved by GE at ground, to match the edges properly. There shall not be any voids behind any tiles.The epoxy to be filled to a depth equal to the thickness of tiles. The rates quoted shall be deemed to be inclusive of all the above.

Material and labour for precast RCC 1:2:4, type B-1 using 20 mm graded stone aggregate as in slabs , landings, and in shelves and the like set in CM 1:6 complete all as specified and as directed. Note: Reinforcement shall be measured and paid separately.

Material and labour for mild steel TMT bars 8 mm dia bar cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Supply and fix in repair vitreous china wash basin counter sunk type oval shape, star white including waste coupling chromium plated, fixing brackets, cutting for and pinning in ends of brackets complete all as specified and as directed. Make:- Hindware Cat No. 10049 or equivalent in Parryware/ Cera

Supply and fix in repair 10 Ltr capacity PVC valveless, syphonic action type, flushing cistern low level, white, with inlet ball valve, float and handle including brackets, flushing pipe, 450mm long PVC Connection and connection to trap, and to flushing and making good to floor complete all as specified .

Supply and fix in repairs Vitreous China half stall urinal flat back, white , of size 580mm x 380mm x 350mm complete with chromium plated waste fittings including providing and fixing plugs,bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing arround urinal back in cement, (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) all as specified and as directed.

S&F in repair vitreous China Urinal partition, 310mmx700mm with and including all fixing acessories complete. Make: CERA, HINDWARE or Parryware.

Supply and fix in repairs pillar taps 15 mm size, brass chromium plated swan neck type screwed down high pressure screwed for iron pipe & fixed complete all as specified as directed. Make:- Jaquar Model No CON-CHR-167KNB or equivalent in Marc/Ess Ess/Crabtree

Supply and fix in repair vitreous china, wash down water closet pedestal pattern white colour connecting to flushing cistern and connection trap including seat cover, closed pattern with flat bottom and cover with mild steel (CP) or aluminium hinging device fixed with necessary bolts complete all as specified as directed.

Supply and fix in repairs bib tap 15 mm size, brass chromium plated rust proof complete all as specified as directed. Make Jaquar Model No COS - 103037 or equivalent in Marc/Ess Ess/Crabtree

Supply and fix in repairs 15mm dia angular stop valve, brass chromium plated complete all as specified as directed. Make :- Jaquar Model No FLR - CHR-5053 N or equivalent in Marc/Ess Ess/Crabtree

Supply and fix in repair brass CP wall mixer 15 mm dia bore for mixing hot and cold water screwed down for iron pipe and fixed complete all as specified and as directed. Make:- Jaquar Model No FLR-CHR-5281N or equivalent in Marc/Ess Ess/Crabtree

Supply and fix in repair urinal spreader of brass chromium plated fancy type suitable for 15 mm bore pipe complete all as specified and as directed. Make:- Cera Model No F8070201 or equivalent in Parryware/Hindware.

Supply and fix in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed.

Supply and fix in repair 20mm dia brass chromium plated tubular towel rail complete all as specified and as directed.

Supply and fix in repair chromium plated towel ring with round flange complete all as specified and as directed. Make:-Jaquar Model No ACN-CHR-1121 BN or equivalent in Marc/Ess Ess/Crabtree

Supply and fix in repair stainless steel soap dish of approved pattern complete all as specified and as directed. Make:- Jaquar AKP-CHR-35731P or equivalent in Marc/Ess Ess/Crabtree

Supply and fix in repair CP brass shower rose with arm complete all as specified and as directed.

Supply and fix Stainless steel grating of 100 mm dia including jointing with solvent cement complete all as specified and as directed.

Supplying and laying 16 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed by Engineer-in-Charge.

Supplying and laying 20 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed by Engineer-in-Charge.

Supplying and laying 32 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed by Engineer-in-Charge.

Supply and fix PVC (SWR) pipes of 110mm dia single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

Supply and fix PVC (SWR) pipes of 50mm dia single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

Supply and Fix PVC (SWR) bends any radius 50mm dia complete all as specified and as directed.

Supply and Fix PVC (SWR) bends any radius 110mm dia without acces door complete all as specified and as directed.

Supply and fix 110mm bore PVC (SWR) bend any radius with acces door complete all as specified and as directed.

Supply and fix 110mm bore PVC (SWR) branch piece single 'Y' equal or unequal complete all as specified and as directed.

Supply and fix in repair 110 mm PVC (SWR) floor trap plain including jointing with solvent cement complete all as specified and as directed.

Supply and fix 110mm bore PVC (SWR) junction single (single T) equal or unequal complete all as specified and as directed.

Supply and fix 110 mm bore PVC SWR junction single Tee with access door complete all as specified and directed.

Supply and fix in repair Chromium plated health faucets (hand held shower type) with shut off valve (thumb or push button type) to allow controlled and continuous flow of water with adequate length and wall mounted pedestal for hanging the faucet etc complete all as specified and directed. Make: Jaguar model No ALD CHR 565 or equivalent in Marc/Ess Ess/Crabtree.

Supply and fix in repair CP brass tioilet paper holder complete all as specified and as directed. Make Jaguar Model No Can-1153N or equivalent in Marc/Ess Ess/Crabtree.

Taking down of cement plaster of any description or thickness/chipping of cement concrete in any situation from brick or concrete surface including raking out of joints, hacking for key scrubbing down with water to received new plaster (Work in foul condition and in shaft) complete all as directed.

Material and labour for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:3 finished even & smooth without using extra cement mixed with liquid water proofing compound (Work in foul condition and in shaft) all as specified. Note - Liquid water proofing compound shall be measured and paid separatly.

Supply only Liquid Water proofing compound of approved quality all as specified and as directed.

Material and labour for preparation of new plastered surfaces and applying two coats of weather proof paint on wall over a coat of wall primer (Work in foul condition and in shaft) including necessary scaffoldings as per manufacturer’s instructions complete all as specified and as directed.

Material and labour for complete removal of existing treatment and applying two coats of weather proof paint on wall over a coat of wall primer including necessary scaffoldings as per manufacturer’s instructions complete all as specified and as directed.

Supply and fix in repair 110mm PVC (SWR) gully trap setting and jointing with solvent cement complete all as specified and as directed.

Material and labour for cutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exceeding 10 cm girth complete all as specified and as directed.

Material and labour for cutting holes into or through brick walls built in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required for superficial area of wall not exceeding 150Sqcm complete all as specified and as directed.

Material and labour for cutting holes into or through brick walls built in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required for superficial area of wall exceeding 150Sqcm and not exceeding 400Sqcm complete all as specified and as directed.

Removing building materials etc. (other than materials considered under schedule of credit) upto a distance of 3.00 Km, beyond the lead included in the rates of demolition as per SSR, including loading, unloading and stacking at the destination complete all as specified and as directed.

Material and labour for preparation of old decorated surfaces and applying two coats of acrylic distemper on ceiling complete all as specified and as per manufacturer’s instructions.

Material and labour for machine cut granite stone slab 20mm thick of approved colour and shade as in steps, jambs, pillars, window- cills, cooking platforms, WHB platform and like over and including 15mm thick screed bed in CM 1:4; laid and jointed in grey cement slurry and pointed with white cement with admixture of pigment to match the shade of the slab including grinding and polishing complete all as specified and as directed. Note:- The rate quoted shall be inclusive of cutting holes in any size and number, rounding edges etc. whatever needed to facilitate the fixing of fittings and fixtures on granite slab. The hole portion shall not be deducted from measurement for payment.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed.

Supply and fix in repair brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and as directed.

Taking down shutter of any description not exceeding 1 sqm each complete all as specified and as directed.

Taking down shutter of any description exceeding 1 sqm but not exceeding 2 sqm each complete all as specified and as directed.

Dismantling boarding any description fixed in any position with nails complete all as specified and directed.

Supply and Fix 18/19mm thick plywood 7 ply grade 1 with BWR type BB fixed with nails to timber frame workin cupboards and drawers etc complete all as specified and as directed.The plywood shall be treated with antitermite chemical like Terminator before using it for work.

Supply and Fix 12mm thick plywood 7 ply grade 1 with BWR type BB fixed with nails to timber frame workin cupboards and drawers etc complete all as specified and as directed.The plywood shall be treated with antitermite chemical like Terminator before using it for work.

Supply and fix 0.9mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturers instruction complete all as specified and as directed.

Supply and fixing 25mm thick second class hardwood factory made plain framed panelled shutters (single panel) rails and styles 75mm width and with panels of 12mm thick commercial ply BWR in 125mm width strips horizontally fixed with gaps in between not morethan 10mm to provide ventilationin the cupboard match with existing and making provision for fixing looking mirror, wood kiln seasoned and chemically pressure treated complete all as specified and as directed. NOTE: Looking mirror shall be measured and paid separately.

Supply and fix 6mm thick teak wood lipping for block board or veneered plywood 18/19mm tghick fixed with nail complete all as specified and as directed.

Supply and fix Nickel plated Auto closing Hydraulic hinges cat type 50 to 75 mm, polished for cup board shutters etc complete all as specified and as directed.

Supply and fix stainless steel handles, 150mm size of first quality, complete all as specified and as directed.

Supply and fix stainless steel handles, 100mm size of first quality, complete all as specified and as directed.

Supply and fix magnetic steel stopper catcher holder for cup board of appropriate shape and size complete all as specified and as directed.

Supply and fix in repairs 20mm dia aluminium anodised tubular towel rail complete all as specified and as directed.

Material and labour for preparation of new or previously untreated wooden surface oif any description not exceeding 10 cm width or girth when connected with other work or painted in different tint and applying wooden filler liquid transparent and apply two coats of synthetic varnish complete all as specified and as directed.

Supply and Fix 100mm hasp and staples, mild steel safety type and fixed with screws complete all as specified and directed.

Material and Labour applying two coats synthetic enamel paint over one coat of pink primer on wooden surface any description over 10 cm in width or girth not otherwise described including for preparation of new or previously untreated wooden surface etc., complete all as specified and as directed.

Material and Labour for french polishing on surfaces of any description width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats omplete all as specified and directed.

Supply and fix in repairs stainless steel telescopic channel with rollers 400 to 500mm long and fixed in position with screws, ISI marked, suitable for cupboard drawers, complete as per the sample kept in the office of Engineer-in-Charge.

Material and lablour for disconnecting cup board warm light and refixing the same in cup board with replacement of bulb and necessary point wiring, drilling holes etc. Complet all as directed by Engineer-in-Charge.

Dismantling stone slab and tiles of any description or thickness in floors, landings aprons etc. laid bedded and pointed in any mortar complete all as specified and as directed.

Material and Labour for Vitrified tiles 10mm thick (square/rectangular) light coloured, area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed of 15mm thick in CM 1:4 complete all as specified and as directed.

Material and labour for preparation of old treated wall surfaces by rubbing, brooming down or steel wire brushing or scraping down smoke soot, moulds, mass and efflorescent salts, and applying one coat of plastic emulsion paint over a coat of wall putty complete all as specified and as directed.

SCHEDULE 'A' PART-II (E/M WORKS)

Taking down carefully point wiring (light, fan, socket or power) complete (including fitting such as switches, ceiling roses, pendants, regulators, sockets, etc can be measured separately) removing the material from wall/ceiling etc, making good the disturbed surfaces all as specified and directed.

Material and Labour for point wiring complete using 2.5 Sqmm PVC insulated unsheathed copper conductor, stranded cable (FRLS) upto and incl working voltage 1100volts grade, conforming to IS 694 ISI marked, drawn in to concealed PVC conduit incl all accessories as bend,tee,junction boxes elbows etc including module GI metal box for modular cover plate ISI marked top cover fixed with Brass screws and earth wire unsheathed copper conductor stranded cable(FRLS) earth continuity wire connected to DBs/sunken boxes/fittings of size 2.5 Sqmm Cross sectional area and all other metal parts with earth dolly for power point on independent board complete all as specified and as directed.

Material and Labour for point wiring complete using 1.5 Sqmm PVC insulated unsheathed copper conductor, stranded cable (FRLS) upto and incl working voltage 1100volts grade, conforming to IS 694 ISI marked, drawn in to concealed/semi concealed PVC conduit incl all accessories as bend,tee,junction boxes elbows etc including module GI metal box for modular cover plate ISI marked top cover fixed with Brass screws and earth wire unsheathed copper conductor stranded cable(FRLS) earth continuity wire connected to DBs/sunken boxes/fittings of size 1.5 Sqmm Cross sectional area and all other metal parts with earth dolly on independent board for One light /Fan point controlled by one way switch 5/6 Amp complete all as specified and directed. NOTE: (i) Necessary PVC rigid junction box for identifying junction as required on site/as per direction by Engineer in charge forpoint wiring work with PVC dummy plates shall be deemed to be included in the quoted rates. (ii) Same size wire shall be used for phase, neutral and earth conductor. (iii) The wiring shall be done strictly by foolowing proper colour coding red, blue yellow for phase, black for neutral and green for earthing.

Supply and Fix Modular Switch 1 way, 6 Amps, 1 module ISI marked, 230 volt, 50 Hz complete all as specified and as directed

Supply and Fix Modular Switch 1 way,16 Amps, 1 module ISI marked, 230 volt, 50 Hz complete all as specified and as directed

Supply and Fix Modular Socket, 16 A, ISI marked, 230 volt, 50 Hz, 2/3 pin combined 2 module complete all as specified and as directed.

Supply and fix white cover plate with frame for 1 module complete all as specified and as directed.

Supply and fix white cover plate with frame for 3 module complete all as specified and as directed.

Supply and fix white cover plate with frame for 4 module complete all as specified and as directed.

Supply and fix ceiling rose, 3 terminal,PVC, isolated body white/any shade ISI marked complete all as specified and as directed.

Supply and fix in replacement wall mounted 20W LED 4ft batten output lumens greater than 100 lumens / watt, CRI =>60, CCT=>5500, Internal surge protection upto 2KW, power =0.95 having extructed aluminium housing provided for efficient heat dissipation with polycarbonate diffuser and integrated electronic driver making connection to ceiling rose to fitting with 3 core 1sq mm copper conductor complete all specified and direction by Engr-in-Charge. Make : Cat No.ENDURALINEARNEOBS20W LED865SPCWHof Havells or equivalent in Philips/ Crompton

Supply and fix in repairs LED down lighter fitting 15 watt output lumens greater than 100 lumens / watt, with round shaped surface mounting LED down lighter PMMA diffuser, power coated while finish housing making connection to ceiling rose to fitting with 3 core 1sq mm copper conductor complete all as specified and direction by Engineer-in-Charge, Make : Cat No. INTEGRANEOSURFACEDLS15W LED840S of Havells or equivalent in Philips/ Crompton

Supply and fix in repairs Exhaust Fan of size 300 mm sweep with louvers, heavy duty with metal body AC 230/240 V, 50 Hz, 1400 RPM and connecting to ceiling rose terminals with 23/.0076 flexible cable and making good the disturbed surface to match with existing finishes complete all specified and directed. Make: Cat No. Turbo Force SP of Havells or equivalent in Usha/Crompton Greaves. NOTE: The unserviceable exhaust fan shall be deposited to MES store by the contractor and properly accounted by the Engineer-in-charge.

Removing the existing LED light fitting any type and refixing the same after complete all specified and directed by Engineer-in -charge.

Supply and fix in repairs mirror light 14 watt output lumens greater than 100 lumens / watt, CRI =>60, CCT=>5500, Internal surge protection upto 2KW, Power factor 2 ft making connection to ceiling rose to fitting with 3 core 1 sq mm copper conductor complete all as specified and direction by Engineer-in-Charge. Make : Cat No.LCL-14-CDL of Crompton or equivalent in Philips/ Havells

Supply and fix in repairs bulk head fitting out put lumens greater than 100 lumens / watt, oval shape edge-lit LED 10 Watt luminaire comprising of high brightness LEDs making connections to ceiling rose to fitting with 3 core 1 sq mm copper conductor complete all specified and direction by Engineer-in-Charge. Make : Cat No. RUGBYGENXFTS10WLED 865SSYMBOPC of Havells or equivalent in Philips/ Crompton Notes:- 1. The repair work shall be carried out in the occupied buildings. The toilets will be handed over in a phasewise manner at a time. Once first set of toilets are completed in all respects and handed over back to user up to their full satisfaction level, then only the next set of toilets will be handed over to contractor. The contractor shall plan the work accordingly. No claims for additional time or expense to contractor will be entertained in this regard.

Notes.(Contd..) 2. Contractor shall note that the specific items are considered in the work to match the items already fixed in similar places. Contractor shall consider for the specific catalogue number mentioned items only wherever make and catalogue number is mentioned along with equivalent makes. The equivalent makes will be considered only if the items are not available in the market. In such cases, contractor need to submit the non-availability certificate of that specific items from the manufacturer and need to prove the equivalency of other makes with proper documentation of both manufacturer company. In case of any dispute in confirming equivalency makes, decision of Accepting officer will be final and binding. No claim will be entertained in this regard.

Schedule of Credit (Minus) Rs. 65,225.00 NOTE: Bidder shall insert credit amount of Rs. 65,225.00 as rate in Green field under Col-5.

Palace constructions

SANDR

GMS Builders