Annual Plan-Thrikkalangode GP Project No.630 Kolapparambu Nechithadam Road-Tarring Ward 16

Amount

Road Tarring

OD213774/2024-2025:od1402190/2021_2022 :Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. All kinds of soil

OD213780/2024-2025:Filling with Quarry Muck Filling up low lying and water logged areas with local material/ quarry muck, spreading in layers, leveling the top at site and consolidation by ramming, etc complete for improving the CBR value of subgrade.

4.9:Wet Mix Macadam <br> Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400.11 & 400.12 and Technical Specification Clause 406. <br> By Mechanical Means with 1 km lead

5.1.1a:Prime Coat :- Low porosity <br> Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per Technical Specification Clause 502

5.2.3a:Tack Coat <br>Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per Technical Specification Clause 503.

OD213799/2024-2025:Mix Seal Surfacing - Manual Means -Type A-Bitumen S-65 using Shredded Plastic providing,laying and rolling of close-graded premix surfacing material of 20mm thickness composed of 11.2 mm to 0.9 mm (Type-A) or 13.2 mm to 0.9 mm (Type-B) aggregates coated with shredded plastic (3% by wieght of butumen) as per standard procedure using penetration grade bitumen to required line,grade and level to serve as wearing course on a previously base, including mixing in suitable plant,laying and rolling with a three wheel 8-10 kN static roller and finishing to required level and grades as per technical specification clause 509 By manual Means :-Type A (II) Bitumen (S-65) Unit = sqm taking output = 500 sqm.

OD213808/2024-2025:Providing and fixing Granite of any colour and shade for Name board,of required size laid over base of cement mortar 1:4 (1 cement : 4 coarse sand),including all charges etc.complete at all,levels,including lettering & amp ;fixing

NOUFAL P T (BID ID -2052677)

P. MOHAMMED (BID ID -2052382)

Bidder Name

NOUFAL P T

P. MOHAMMED

SHAFEEKHALI VADAKKAN