COMPOUND WALL

Supply. Delivery and Fixing of Precast concrete panels of M25 grade Compound wall with columns with a column post size of 1800mm x 300mm x 50mm (6x5 inch) with 3 bars of 3mm HT Steel will be used. 150mmX150mm (1X6) Vertical I Section Post with 6 Bars of 3mm HT IN (POST) Steel with be used and 1.5 meters of heigt of precast wall including cost and conveyance and incidental charges etc complete.+

Augoring and boring of holes in site for Bored cast-in-situ R.C.C. Piles for building foundations in loamy, clayey soils like Black cotton soils and ordinary soils without under reams as per IS 2911 as per approved designs including all operations, incidental, labour charges, hire charges of machinery, augur bore drill and shell equipment, etc, complete for all depths and for finished item of work for piles of following diametres. 300 mm dia

450 mm dia for Gate Columns

upply and placing of the VRCC M-20 Grade Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER/ MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching. machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating. curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work. (BLD-CSTN-2-14) Piles 300mm x 300mm Piles 450mm x 450mm for Gate Columns

For Plinth Beam

Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT)/Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors. (APSS No.126)

Brick Masonry in CM (1:6) with 2nd class Bricks traditional size 23 x 11 x 7 cms including cost of all materials and labour charges for curing and scaffolding charges etc., complete

Plastering with CM (1:4), 12 mm thick including Cost & Conveyance of all materials and labour charges for mixing and curing etc., Complete as per S.S.

Painting to the External walls with 2 coats of Acrylicemulsion paint of Weather Proof Water based exterior Grade having VOC (Volatile Organic Compound) antain less than 50 Grams per liter of approved brand and shads including one coat of cement primer after throughly brushing the surface to remove all dirt and remains of loose powdered materials including cost and conveyaance of all materials to work site and all operational incidental, labour charges etc., complete for finished item of work as per SS 911 for Externals Walls.

Manufacture, supply, delivery and fixing of Window grills, Compound wall grills, Iron Doors, Windows made with MS flats etc including welding, finishing, applying red oxide paint as primary coat etc complete unit 1.00 kgs

Painting to new iron work with synthetic enamel paint two coats over 9 pirmary coat with red oxide paint including cost and conveyance of all materials and labour charges etc., complete