ICDS 2025-26 Construction of Various Anganvadis in Various Villages Of Mandvi Taluka SRT/ MND/ PKG NO. 02 / Total-3 Anganvadis (1) Balethi-1 (2) Amli-2 (3) Luharvad-1 Ta.Mandvi Di.Surat

Name of work:-ICDS 2025-26 Construction of Various Anganvadis in Various Villages Of Mandvi Taluka SRT/

MND/ PKG NO. 02 / Total-3 Anganvadis (1) Balethi-1 (2) Amli-2 (3) Luharvad-1 Ta.Mandvi Di.Surat

Bill Of Quantities (A)

Percentage Rate Tender

Item Description of Item Quantity Unit Rate in Amount

No. (with brief Specification and reference to book of specifications) Figures

1 Excavation for foundation upto 1.5 m depth including 221.46 Cum. 122.93

sorting out and stacking of useful materials and

disposing off the excavated stuff upto 50 Meter lead. (A)

Loose or soft soil

2 Excavation for foundation upto 1.5 m to 3.0 m depth 38.88 Cum. 136.47

including sorting out and stacking of useful materials

and disposing off the excavated stuff upto 50 Meter lead. (A)

Loose or soft soil

3 Filling available excavated earth (excluding rock in trenches 194.79 Cum. 136.91

plinth, slides of foundations etc. in layers not exceeding 20 cm

in depth consolidating each deposited layer by ramming and

4 Filling in foundation and plinth with murrum or yellow soil 36.00 Cum. 301.77

selected soil in layers of 20cm thickness including watering

ramming and consolidating etc. complete

5 Filling in plinth with sand under floors including watering 27.00 Cum. 481.80

ramming, consolidating and dressing complete

6 Providing and laying cement concrete 1:2:4 (1- Cement : 2- 39.99 Cum. 3923.85

Coarse sand : 4- graded stone aggregates 20 mm nominal size)

and curing complete excluding cost of formwork in (A)

Foundation and Plinth (more than 10 ton)

7 Providing and laying controlled cement concrete M- 200 and 26.46 Cum. 4563.18

curing complete including the cost. of form work but

excluding the cost of reinforcement for reinforced concrete

work in (A) Foundations footing base of columns and the like

and mass concrete

8 Providing and laying controlled cement concrete M-200 and 12.18 Cum. 8001.22

curing complete including the cost of form work but excluding

cost of reinforcement for reinforced concrete work for

Column upto plinth level & Ground Floor

9 Providing and laying cement concrete M.200 and curing 1.50 Cum. 8042.18

complete inculding the cost of formwork but Excluding the

cost of reinforcement for reinforced concrete work in All

Types of Column D) Column, Pillers, posts and struts, upto

10 Providing and laying controlled cement concrete M.200 and 31.08 Cum. 6321.59

curing complete inculding the cost of formwork but

Excluding the cost of reinforcement for reinforced concrete

work in All Types of Beams,(E) Beam, upto All Floor.

11 Providing and laying controlled cement concrete M.200 and 19.56 Cum. 6267.05

curing complete inculding the cost of formwork but

Excluding the cost of reinforcement for reinforced concrete

work in All Types of Slab,All Thickness (C) Slab upto Plinth

and upto All Floor.

Item Description of Item Quantity Unit Rate in Amount

No. (with brief Specification and reference to book of specifications) Figures

12 Providing and laying controlled cement concrete M.200 and 2.40 Cum. 5865.08

curing complete inculding the cost of formwork but

Excluding the cost of reinforcement for reinforced concrete

work in Lintel upto All Floor.

13 Providing and laying controlled cement concrete M.200 and 2.70 Cum. 6886.18

curing complete inculding the cost of formwork but

Excluding the cost of reinforcement for reinforced concrete

work in Chajja. upto All Floor.

14 Providing and fixing TMT bars Fe-500D steel reinforcement ###### KG 77.31

for R.C.C. work including binding, bending and placing in

position complete upto floor two level ,Ground Floor, First

Floor , Second Floor, Third Floor, Terrace Floor (all floor).

15 Brick work using common brunt clay building bricks having 31.17 Sqmt 4214.32

crushing strength not less than 35 kg/sqcm. in foundation and

plinth in cement mortar 1:6 (1 cement :6 fine sand) etc.comp.

(B) Conventional Ground floor upto Plinth

16 Brick work using common brunt clay building bricks having 69.63 Cum. 4503.04

crushing strength not less than 35 kg/sqcm. in superstructure

above plinth level upto floor two level in cement mortar 1:6

(1 cement :6 fine sand) etc.comp. (B) Conventional Ground

17 Brick work using common brunt clay building bricks having 20.73 Cum. 4545.16

crushing strength not less than 35 kg/sqcm. in superstructure

above plinth level upto floor two level in cement mortar 1:6

(1 cement :6 fine sand) etc.comp. (B) Conventional First Floor

18 Half brick masonry in common brunt clay building bricks 16.02 Sqmt 629.83

having crushing strength not less than 35 Kg/Sq.Cm. in

Cement mortar 1:4 (1- Cement : 4 -coarse sand ) in (B)

Conventional Ground Floor

19 Providing 15mm thick cement plaster in single coat on Rough 455.73 Cum. 161.19

(Similar)side of single or Full/half brick walls for interior

plastering upto floor two level and finished even and smooth

in (ii) Cement mortar 1:4 (1-cement :4-sand) Ground Floor

20 Providing 15mm thick cement plaster in single coat on Rough 90.18 Cum. 185.75

(Similar)side of single or Full/half brick walls for interior

plastering and finished even and smooth in (ii) Cement mortar

1:4 (1-cement :4-sand) First Floor

21 Providing & laying10 mm. thick cement plaster in single coat 163.35 Sqmt 148.31

on fair side of ceilings for interior plastering upto floor two

level and finishing with smooth mala plaster.(i) Cement

mortar 1:4 (1 cement : 4 sand) Ground Floor

22 20mm thick sand faced cement plaster on walls upto height 10 452.13 Sqmt 315.68

metres above ground level consisting of 12mm thick backing

coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick finishing

coat of C.M. 1:1 (1-cement : 1-sand) etc. complete. Upto

Item Description of Item Quantity Unit Rate in Amount

No. (with brief Specification and reference to book of specifications) Figures

23 Providing and laying polished Granite Slab 18mm thick in 21.60 Sqmt 2190.69

Flooring laid 20mm thick Cement Mortar 1:4 (1-Cement : 4-

Coarse Sand) and jointed with Grey Cement Slurry including

full molded round front edges , rubbing and polishing etc.

24 Providing and laying polished Granite Slab 18mm thick in 58.74 Sqmt 2159.38

Risers of steps Dedo, window sill, jembs and pillars laid

mm thick Cement Mortar 1:4 (1-Cement : 4-Coarse Sand) and

jointed with Grey Cement Slurry including full molded round

edges , rubbing an

25 Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 141.15 Sqmt 1120.36

24'' in flooring treads of steps and landing laid on a bed of

12mm thick cement mortar 1:3 (1-cement : 3-coarse sand )

finishing with flush pointing in white cement.Soluble Salt

PVT. Tiles in All Rooms.

26 Providing and laying Vitrified tiles 8 mm thick , 24'' x 24'' in 73.44 Sqmt 1195.02

skrting risers of steps and dedo on 10mm thick cement plaster

1:3 (1-cement : 3-coarse sand) and jointed with white cement

slurry Soluble Salt PVT. Tiles in All Rooms.

27 Providing and fixing flush door both sides laminated 23.94 Sqmt 2838.10

andshutter fabricated from 35 mm thick solid core malemine

faced three layered pre laminated flat pressed wood based

exterior grade bonded BWP/BWR synthetic resin having

stamped IS 12823 grade I type II including three coats of

lacquer polishing to exposed wooden surfaces and Stainless

steel decorative type designs fixtures / fastening 2Nos.

Handles, 2Nos. Aldropes, towerbolt etc. as per architectural

detailed drawing and as directed by engineer in charge..

28 Providing and fixing window having extruded aluminum 12.96 Sqmt 1583.95

Colour anodized section frame main outer size 66.00 x 50.00 x

1.50 mm(Wt 1.40 Kg / Rmt), horizontal two track member

size Both Side 66.00 x 50.00 x 1.50 mm(Wt 1.40 Kg / Rmt),

with sliding shutters of horizontal member size 66.00 mm x

26.00 mm x 1.50mm (wt.of 0.90 Kg/mt), vertical member of

size 66.00 mm x 26.00 mm x 1.50mm (wt.of 0.90 Kg/mt) with

5 mm thick transparent bronze colour tinted float glass with

powder coated aluminum fittings and fixtures and transparent

silicon sealant glass fixing to frame as per details etc complete

29 Providing and fixing standared extruded of alluminium section 8.64 Sqmt 1175.55

of size 63mm x 38.10mm x 1.2mm (Jindal Section :2434, @

Wt. 0.643 Kg/mt) with colour anodized alluminium frame for

ventilation with 5 mm thick frosted glass as details etc

complete for Ventilation

30 Providing and fixing M.S. grill of required pattern of windows 855.90 Kg 116.15

etc. with M.S.. flats at required spacing and frame alround

square or round headed bolts and nuts or by screws.including

applying a priming coat of red lead paint and two coats of oil

Item Description of Item Quantity Unit Rate in Amount

No. (with brief Specification and reference to book of specifications) Figures

31 Applying two coats of Birla (white cement based) or (acrylic 635.82 Sqmt 40.59

lapy- putty) or equivalent & two coats of primer of approved

brand and manufacture on new wall surface to give an even

shade including thoroughly brushing the surface free from

mortar dropping and other foreign matter and sand papered

smooth. with Wall painting (three coats) with plastic emulsion

paint of approved brand and manufacture on undecorated wall

surface to give an even shade including throughly brushing the

surface free from mortar droppings and other foreign matter

and sand papered smooth.

32 Wall painting (two coats) with plastic emulsion paint of 635.82 Sqmt 84.36

approved brand and manufacture on undecorated wall

surface,Ceiling surface to give an even shade including

throughly brushing the surface free from mortar droppings and

other foreign matter and sand papered smooth.

33 Finishing wall with weather proof exterior emulsion paint on 452.13 Sqmt 120.26

wall surface (two coats) to give an required shape even shade

after thoroughly brushing the surface to remove all dirt, and

remains of loose powdered materials.etc complete. Priming:

Apply a liberal coat of exterior acrylic primer and allow it to

dry for 4-5 hours. Application of putty is not recommended.

Minimum 4-6 hours duration is required between each coat

of weather shield max paint

34 Wall painting cartoon types,ABCD,123,Animal 72.00 Sqmt 1161.50

photos,Vegitables & fruit paiting with plastic emulsion paint

of approved brand and manufacture on undecorated wall

surface to give an even shade including throughly brushing the

surface free from mortar droppings and other foreign matter

and sand papered smooth.

35 Providing and laying integral cement based water proofing 163.35 Sqmt 880.72

treatment including preparation of surface as required for

treatment of roofs, balconies, terraces etc. consisting of

following operations.

(a) Applying and grouting a slurry coat of neat cement using

2.75 kg/sqm of cement admixed with proprietary water

proofing compound comforming to IS:2645 over the R.C.C.

slab including cleaning the surface before tratment.

(b) Laying cement concrete using broken bricks/brick bats

mm to 100 mm size with 50% of cement mortar 1:5 (1 Cement

: 5 Coarse sand) admixed with proprietary water proofing

compound conforming to IS:2645

,brick bats is finally covered by jointless cement plaster

20mm th. in C.M. 1:4 added with special water proofing

compound confirming to IS:2645 & top smooth finished with

trowel with false chequered marking of 300 mm.size.The

treatment is carried along the vertical surface of the parapet

& other adjoining wall up to height of about 300 mm in a

shape of quarter round vata Incl. curing etc. Comp. With

average thickness of 120 mm and minimum thickness at

khurra as 65 mm.'(c) The whole terrace so finished shall be

flooded with water for a minimum period of two weeks for

curing and for final test. All above operations to be down in

Item Description of Item Quantity Unit Rate in Amount

No. (with brief Specification and reference to book of specifications) Figures

36 Providing and fixing Stainless Steel railing having 50 mm dia 15.00 RMT 3333.50

hollow stainless steel pipe as hand rail and 32 mm dia hollow

stainless steel pipe with combination of 10 cm long 16mm dia

pipe as per virtical supports 20 mm dia hollow stainless steel

37 Providing and constructing sandwitch type Granite stone top 7.50 RMT 3589.54

& bottom Kota Stone platform 0.6 mt. wide & 0.75 mt. height,

including front granite stone patti of 10 cm wide, vertical

partitions of Kota stone with cement Mortar(1:1) as required

comp as per instruction given by site in charge at all floors.

38 Providing and fixing Child Friendly wash down water closet 3.00 Nos 1648.15

(European type, W.C. Pan) with integral P or S trap including

jointing the trap with soil pipe in Cement Mortar 1:1 (1-

Cement : 1-fine sand) inculding Providing and fixing plastic

seat and cover for wash down water closer with C.P. brass

hinges and rubber buffers. (A) vitreous China Pattern :(i) in

39 Providing and fixing Child Friendly washbasin with single 3.00 Nos 2165.90

hole for pillar tap with C.I. or M.S. brackets painted white

including sutting holes and making good the Providing and

fixing C.P. brass waste for washbasin or sink. (A)

32mmdia.,Providing and fixing pillar tap, capstan head, screw

down high pressure with screws, shanks and back nuts. (i)

15mm dia.,Providing and fixing brass screw down stop tap.(A)

15mm dia..(A) Vitreous China:(ii) Flat Back washbasin

mm x v 400mm size. (i) In white colour.

40 Providing and fixing 600mm x 450mm bevelled edge mirrror 3.00 Nos 859.41

of superior glass mounted on 6mm thick A.C. sheet or

plywood sheet and fixing to wooden pluge with C.P. brass

screws and washers.

41 Providing and fixing Kitchen sink with C.I. or M.S. brackets, 3.00 Nos 3204.92

painted white including cutting holes in walls and making

good the same (C) S.S. & Sink.(i) 600mm x 450mm x

150mm size with Providing and fixing C.P. brass waste for

washbasin or sink. (A)

42 Providing and fixing PVC SWR Nahni trap IS 14735 for drain 9.00 Nos 599.63

- 100 mm diameter with jali of the following nominal diameter

of self cleansing design with C.I scread down or hinged

grating including the cost of cutting and making good the

43 Providing and fixing screw down bib taps of following 12.00 Nos 186.83

size.(A) Brass screw down bib tap polished bright. (i)

44 Providing and fixing Gun metal check or non-return fullway 6.00 Nos 420.63

wheel valve. 25mm. dia.

45 Providing and fixing chromium plated brass half turn flush 3.00 Nos 263.77

cock of approved quality including fixing in pipe line etc.

complete.(ii) 25mm dia.

46 Providing and fixing ball cock of approved. quality as 3.00 Nos 132.89

directed.(A) Copper Metal (A) 25mm. dia.

Item Description of Item Quantity Unit Rate in Amount

No. (with brief Specification and reference to book of specifications) Figures

47 Providing laying and jointing in true line and level 15mm dia. 42.00 RMT 72.65

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the

wall with the help of clamp at every two metre C/C or shall be

concealed as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

48 Providing laying and jointing in true line and level 25mm dia. 42.00 RMT 91.84

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the

wall with the help of clamp at every two metre C/C or shall be

concealed as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

49 Providing, laying and jointing in true line and level 110 72.00 RMT 878.56

diametre U.P.V.C (Type B) conforming to IS 13592-1992

with one end plain and other end socketed with rubber ring, &

fittings conforming to ISI 14735-1999 of approved make for

drainage system pipe line, pipe shall be jointed with each other

with rubber lubricant, pipe shall be fixed on wall using of

PVC clamp of the size 110 mm diametre x 149 mm length x

145 mm heigh at every 2000 mm center to center or shall be

concealed in walls as directed including necessary fittings such

as bends, shoes etc. including testing of pipes and joints and

jointed with adhesive solvent cement including cost of all

50 Providing and fixing S.W. gully trap with C.I. grating brick 6.00 Nos 1246.92

masonry chamber and water tight C.I. cover with frame of

300mm x 300mm size (inside) with standard weight.(i) Square

mouth traps.(B) 150mm x 100mm size P or R type

51 Constructing Brick masonry road gully chamber 500mm x 6.00 Nos 2017.19

450mm x 600mm including 500mm x 450mm C.I. horizontal

grating wih frame complete.

52 Constructing brick masonry chamber for underground C.I. 6.00 Nos 2932.93

Inspection chamber and bends with bricks having crushing

strength not less than 35Kg/Cm2 in C.M. 1:5 C.I. cover with

frame (Light duty) 455mm x 610mm intenal dimensions total

weight of cover with frame to be not less than 38Kg. (Wt. of

cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with

1:2:4 mix (1-cement :2- coarse sand :4-graded stone aggregate

20mm size) foundation concrete 1:5:10 inside plaster 15mm

thick with cement mortar 1:3 finished smooth with a floating

coat of neat cement on walls and bed concrete etc.

complete.(i) Inside dimensions 455mmx 610mm and 450mm

deep for single pipe line.

53 Providing laying (to level or slopes) and jointing reinforced 30.00 RMT 257.19

concrete Light duty non-pressure pipes I.S. class NP2 of the

following internal diameter with collars and butt ends prepared

for collar joints including testing of joints complete. (B)

Item Description of Item Quantity Unit Rate in Amount

No. (with brief Specification and reference to book of specifications) Figures

54 Providing & fixing G.I. Rain water spout of 50 mm.dia & 30 3.00 Nos 101.90

55 Providing and fixing in position cowel went to pipes.(C) 6.00 Nos 505.17

56 Providing erecting and fixing double coated PVC. (ISI) water 3000.00 Litr 3.94

tank of required capacity each with all necessary fittings and

connection etc. complete on terrace.

57 'Providing & Supplying of High-quality virgin plastic build 3.00 Nos 6565.00

Table size LxBxH (1.50 x 0.75 x 0.75) As per attached

drawing & instructed by in charge Consultant. 52-Inch Kids

Half Moon Plastic Table is a durable and spacious table

designed with adjustable height legs for children. Its unique

half-moon shape provides ample space for group activities,

crafts, or learning. Made from sturdy plastic, it is easy to clean

and maintain, making it ideal for classrooms, playrooms, or

home use. Table of Standard make ( Nilkamal, Cello etc. or

58 'Providing and Supplying of Fancy CHAIRS of pvc base and 6.00 Nos 939.30

armrest, as per selection and complete the work satisfactorily

as per instruction of architect or Engineer-in charge Product

Type Kids School Chair,Back Type:Mid

Back,Material:Plastic,Color:Red, Yellow, Blue. Min

Size14x17x12 inch Chair of Standard make ( Nilkamal, Cello

etc. or equivalent ).

59 Providing & Fixing Kitchen Storage Cabinetwith 5 self , 2 11.25 Sqmt 2807.80

nos door 19 mm plywood with 4 mm glass panel door,Storage

self made with 12mm thick water proof plywood of ISO

door sides border of 20 mm thick in teak wood, All outer

surfaces are to be laminated with 1.5 mm laminate and internal

laminated with 0.80mm laminate sheet as approved by

architect. Including all necessary hardware & fittings such as

screw, buffer, bonding material etc.all work must be done As

per Architect Drawing & Instructed By Site Engineer

60 Providing & Fixing 32-inch LED SMART TV is an ideal, 3.00 Nos 16665.00

compact entertainment unit for bedrooms, kitchens, or small

living spaces. Standard models feature HD Ready resolution

(1366 × 768), a 60Hz refresh rate, 16W to 20W speakers with

Dolby Audio, and built-in smart capabilities all work must be

done As per Architect Drawing & Instructed By Site Engineer

61 Providing & Fixing RO SYSYEM Capacity/Flow: Features a 3.00 Nos 15150.00

high 20 LPH purification speed with a 12-litre storage tank,

making it highly efficient for continuous water requirements.

Health Enhancements: Multi-stage

RO+UV+Copper+Zinc+Alkaline pH B12 technology that

restores essential active minerals and balances pH levels. all

work must be done As per Architect Drawing & Instructed By

Item Description of Item Quantity Unit Rate in Amount

No. (with brief Specification and reference to book of specifications) Figures

62 Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire 27.00 Pt. 488.84

of 1.5 sq.mm (Green) both are of ISI marked 1.1 kV grade

FRLS PVC insulated multi strand copper wires up to 10 mtr

length , in below type of pipe erected with 6A Modular type

switch / bell push & accessories and earth continuity of

following type, erected on PVC/ Metallic/ Wooden box, single

mounting base frame covered with textured/ metallic/ white

front plate modules erected on / in wall / ceiling as per pipe

erected, with necessary Lamp holder/ ceiling rose /

H.D.Connector as directed.(c) with oval conduit /PVC casing

capping double lock type erected flushed on wall/ceiling

complete Cat. III

63 Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 12.00 Pt. 715.08

sq.mm (Green) both are of .ISI marked 1.1 kV Grade FRLS

PVC insulated multi strand copper wires up to 10 mtr length,

in below type of pipe erected with 6A Modular type switch

and hum free EME step type electronic fan regulator

mounted and accessories with earth continuity of following

type erected on PVC / Metallic/ Wooden box, single mounting

base frame covered with textured/ metallic/white front plate

modules erected on / in wall / ceiling as per pipe erected. with

necessary ceiling rose / H.D.Connector as directed. (c) with

oval conduit /PVC casing capping double lock type erected

flushed on wall/ceiling complete

64 Point wiring for on board Looped Plug with 6A Modular type 9.00 Pt. 309.06

switch & 5 pin socket erected on PVC / Metallic/ Wooden

box, single mounting base frame covered with textured /

metallic/ white front plate modules erected on / in wall /

ceiling with following type accessories Cat. III

65 Providing following type of Modular Type Accessories 9.00 Nos 151.50

mounted with PVC / metallic/ Wooden box, single mounting

base frame covered with textured / metallic/ white front plate,

modules erected with necessary connections as per site

situation directed by Engineer In charge.(1)One No. SP

66 Providing following type of Modular Type Accessories 9.00 Nos 151.50

mounted with PVC / metallic/ Wooden box, single mounting

base frame covered with textured / metallic/ white front plate,

modules erected with necessary connections as per site

situation directed by Engineer In charge. (2) One No 5 pin

67 Providing following type of Modular Type Accessories 3.00 Nos 180.79

mounted with PVC / metallic/ Wooden box, single mounting

base frame covered with textured / metallic/ white front plate,

modules erected with necessary connections as per site

situation directed by Engineer In charge. (9) 16 Amp. SP one

way switch .Cat.III

68 Providing following type of Modular Type Accessories 3.00 Nos 199.98

mounted with PVC / metallic/ Wooden box, single mounting

base frame covered with textured / metallic/ white front plate,

modules erected with necessary connections as per site

situation directed by Engineer In charge. (10) 6/16Amp.

Universal socket .Cat.III

Item Description of Item Quantity Unit Rate in Amount

No. (with brief Specification and reference to book of specifications) Figures

69 Providing and erecting Mains with 1.1 kV grade FRLS PVC 216.00 Mt. 104.03

insulated ISI marked stranded Copper conductor wire in

following type of pipe to be erected concealed in /flushed on

wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC

insulated stranded wire of green colour for earth continuity of

following size (C) With oval conduit /PVC casing capping

double lock type (b) 2 wire 2.5 sq. mm

70 Providing and erecting Mains with 1.1 kV grade FRLS PVC 72.00 Mt. 120.19

insulated ISI marked stranded Copper conductor wire in

following type of pipe to be erected in / on wall / ceiling with

2.5 sq. mm copper conductor FRLS PVC insulated stranded

wire of green colour for earth continuity of following size (C)

with oval conduit /PVC casing capping double lock type (a)

71 Providing and erecting Mains with 1.1 kV grade FRLS PVC 60.00 Mt. 170.69

insulated ISI marked stranded Copper conductor wire in

following type of pipe to be erected in / on wall / ceiling with

2.5 sq. mm copper conductor FRLS PVC insulated stranded

wire of green colour for earth continuity of following size (C)

with oval conduit /PVC casing capping double lock type (b)

72 Providing & erecting Switch board for Computer or electric 3.00 Nos 1133.22

apparatus consisting of following modular type accessories

mounted with PVC/ Metallic concealed/ open box with single

mounting base frame covered with textured/ metallic/ white

front plate,modules erected with necessary connections as

1 no. 6A/16A universal plug-switch combined.

3 nos. 6A Switch 3 nos. 6A 5 pin Plug For Modular Type

Accessories Cat. III

73 Supplying and erecting LED indoor fittings with LEDs of 21.00 Nos 373.70

wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be made of thick sheet

Steel conforming to IS: 513/ CRCA/ aluminium die cast

powder coated and high U.V. & corrosion resistance with

diffuser with company mark/name 160V to 270V, Power

Factor more than 0.95, THD < 15%, CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/ watt, LED driver efficiency >

85 % (fitting required LM-79 & LM-80 Certificates) (NOTE:

Below description have shown ranges of Wattage capacity of

LED fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.) (A) Tube Light with

integral driver (iv) 22-24 Watts, Surge - 2KV,IP-20,

conventional 4 feet Cat.III

74 Supplying and erecting led lamps with following wattage 6.00 Nos 112.11

capacity of 220 to 240 voltage, minimum 15000 burning hours

life, 500 V in built-surge protection, Polycarbonate diffuser,

mounting suitable for E14 / E27 / B22 lamp holders, pf >=

(A) LED Lamps integral type, with PC diffuser suitable

LAMP holder (ii) 5 to 8 watts Cat-III

Item Description of Item Quantity Unit Rate in Amount

No. (with brief Specification and reference to book of specifications) Figures

75 Providing and erecting Miniature circuit breaker single pole 24.00 Nos 123.22

6A to 25A suitable to operate on 240 V A.C. system and

having breaking capacity 10 KA to be erected in existing box.

confirming to IS 8828/1996 with ISI Mark Cat-III

76 Providing & erecting 240 V MCB double pole switch for 6.00 Nos 362.59

motor & inductive load (C Curve) having 10 KA breaking

capacity & confirms to IS : 8828 in existing box having

following capacity (B) 40 Amp. Cat-III

77 Sheets steel powder coated enclosure suitable for 3.00 Nos 176.75

incorporating One/Two nos. MCB.

78 Providing and erecting Sheet Steel powder coated MCB 3.00 Nos 1492.78

distribution board - flush /surface mounted fitted with busbar,

neutral link, earth bar and DIN rail, Conforms to IS 8623-1 &

3, IEC 61439-1 & 3 without MCB to house appropriate nos. of

MCBs.(The DBs should be used of same company of MCB to

be used) suitable for (A) single phase incoming and horizontal

single phase outgoing (b) sheet steel double door (IP-43)

79 Providing and erecting Approved make RCCBs conforming to 3.00 Nos 2458.34

IS: 12640 and having sensitivity of 30 mA and Short Circuit

withstand capacity of 10 KA and suitable for operation on

single phase 240 V,50Hz. having characteristic of quick action

& tripping with all advance feature & do not incorporate any

electronic component. for following Max. rating erected as

directed (ii) 40Amps. DP Cat. III

80 Providing and erecting Pipe type earthing having 150 cms.long 3.00 Nos 368.65

and 2.5 cms. dia. galvanised iron pipe with coupling and buch

buried in specially prepared earth pit complete with necessary

8 SWG earth wire.

81 Providing and erecting Pipe type earthing having 150 cms.long 3.00 Nos 171.70

and 2.5 cms. dia. galvanised iron pipe with coupling and buch

buried in specially prepared earth pit complete with necessary

8 SWG earth wire For using salt and charcoal / coke as

required for pipe type earthing.

82 Providing and erecting Approved make Ceiling fan with 12.00 Nos 1596.81

double ball bearing ISI mark with condenser A.C. 230V.50

Hz.1200 mm. sweep complete, canopy erected on existing

hook or clamp with earthing. [Make shall be approved by

Engineer in charge]

83 Supplying and erecting 19 / 20 mm. nominal bore Medium 12.00 Mt. 108.07

Class M.S. Pipe down rod erected duly painted for fan

complete with proper insulation without leakage and earthing.

Item Description of Item Quantity Unit Rate in Amount

No. (with brief Specification and reference to book of specifications) Figures

84 Supplying & erecting fan hook box of 10 mm M.S. round bar 12.00 Nos 108.07

bounded to the RCC bars up to 50mm length each side and

pierced through a 16 Gauge M.S. box / Heavy Duty PVC box

complete erected concealed in Ceiling with necessary finishing.

85 Boring holes 3.50 m deep in ordinary soil (for cast in situ 32.00 Nos 833.40

piles) and getting out the soils and dispossal of the surplus

excavated soil as directed within a lead of 50 meter following

diameter of piles. (ii) 250mm

86 Excavation for foundation upto 1.5 m depth including sorting 9.72 Cum. 157.52

out and stacking of useful materials and disposing off the

excavated stuff upto 50 Meter lead.(B) Dense or Hard soil

87 Providing and laying ordinary cement concrete 1:2:4 (1 3.96 Cum. 4030.50

Cement : 2 coarse sand : 4 graded stone aggregates 20mm

nominal size) and Curing complete excluding cost of

formwork and reinforcement for reinforced concrete work in

(A) Foundation,Footing, Base oe Columns and mass Concrete.

88 Providing and laying ordinary cement concrete 1:2:4 (1- 6.80 Cum. 8593.80

Cement 2- coarse sand : 4- graded stone aggregates 20 mm

nominal size) and finishing smooth with,curing etc. complete

including the cost of formwork but excluding the cost of

reinforcement for R.C.C work in (A) BEAMS :(i) Having

cross-sectional area 0.05 to 0.08 Sq.M

89 Providing and laying ordinary cement concrete 1:2:4 (1- 1.84 Cum. 11797.33

Cement 2- coarse sand : 4- graded stone aggregates 20 mm

nominal size) and finishing smooth with,curing etc. complete

including the cost of formwork but excluding the cost of

reinforcement for R.C.C work in (B) COLUMNS: (i) Having

cross-sectional area 0.05 to 0.08 Sq.M

90 Brick work using common burnt clay building bricks having 14.10 Cum. 4491.75

crushing strength not less than 35 kg./Sq.Cm. in foundation

and plinth in Cement Mortar 1:6 (1- Cement : 6 -fine sand)(A)

91 Providing TMT Bar FE 500/500D reinforcement for R.C.C. 1018.48 KG 77.29

Work including bending,binding and placing in position

complete up to floor two level.

92 Providing 15 mm thick cement plaster in single coat on 156.00 Sqmt 161.20

brick/concrete wall for interior plastering up to floor two level

finished even and smooth in (I) cement mortar 1 : 4 (1 cement

93 Finishing wall with weather proof exterior emulsion paint on 156.00 Sqmt 120.26

wall surface (two coats) to give an required shape even shade

after thoroughly brushing the surface to remove all dirt, and

remains of loose powdered materials.etc complete

Item Description of Item Quantity Unit Rate in Amount

No. (with brief Specification and reference to book of specifications) Figures

94 Providing And Fixing M.S.Grill/ Gate of required Pattern 220.00 KG 119.53

With necessary M.S.Angle, M.S.Pipe, M.S. Flats, M.S.Square

or Round bars and other structural steel at required sapcing

and fixing in wall with necessary fixtures including cutting

welding and grinding etc completed

Rupees Forty Three Lakhs Eight Hundred Thirteen and Paise Twenty Three Only

Deputy Executive Engineer

Panchayat (R&B) Sub-Division

I/We am/are willing to carry out the work at ………………………………………………..% above/below (percent should be written in

figures and words) of the estimated rates mentioned above. Amount of my/our tender works out as under.

*Estimated amount *Estimated amount

Put To Tender Rs…..4300813.23 Put To Tender Rs…..4300813.23

Deduct ……. % below Rs……………………..…. Add ……. % Above Rs…………..….

Net Rs. …………………….… Total Rs. ………….…

1 The Contractor shall exhibition board with detailed specification and details of works directed by the Engineer – In – Charge for which

no extra payment shall be made.

2 The labourcess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills.

4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt G.R.: PRC-10/2017 Cement

Consumption/16/C Date: 11/05/2017 as stated in S.O.R. therefore in R.C.C. items where the reisa change as per actual mix design the

cost of difference of cement consumption have been deducted from the rate of original item at the rate of input rate mentioned in all the

Signature of the contractor Executive Engineer

કોન્ટ્રાકટરની સહી Panchayat (R&B) Division