Construction of Type - I Quarters 16 Nos. (2 Nos. Blocks) building at Govt. Polytechnical college at Talwar in Tehsil Jaisinghpur Distt. Kangra (HP)

Amount

Excavation in foundation and trenches in all heights and depths and in all kinds of soil including saturated soils comprising of pick work, jumper work, pick jumper work, blasting work both in soft and hard rock, chiseling / wedging out of rock (Where blasting is prohibited) or any other mixed variety of soil including shoring, strutting, de-watering and pumping or bailing out water (surface and sub soil water) up to any heights / depths or any quantum of water including slush which may arise during de-watering, removal of slush and stacking the serviceable and un-serviceable material clear from the edges of excavation and then returning the stacked soil in 15cm (fifteen centimeter) layers where required into plinth and side of foundation etcetera, consolidating each deposited layer by ramming & watering and then disposing of all surplus un-serviceable excavated earth as directed within all leads and lifts, by head-load, mechanical transportation or by any other mode of transportation with all cost of labours, machineries and disposed of material to be neatly dressed and leveled as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Excavation in drains and channels etcetera in earth work in all kind of classification of soil, such as pick work, jumper work, pick jumper work, blasting work, hard and soft blasting and work doing in saturated soil including chiselling or wedging out rocks where blasting work is prohibited or any other mixed variety of soil, including shoring, strutting de-watering and pumping or bailing out water (surface and sub soil water) upto any depth or any qantum of water including slush which may arise during de-watering or removal of slush, lift outo any heights, stacking the excavation soil clear from the edge of excavation and then retuning the stacked soil in 15cm (Fifteen centimeter) layers, when required into plinths, sides of foundation etcetera consolidating each deposited layer by ramming, watering and then disposing of all surplus excavated earth as per H.P.P.W.D specification approved drawing , design, as per the entire satsifaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Stone filling with hard stone of approved quality dry hand packed tightly under floor. as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing form work with steel plates 3.15 mm (three point fifteen millimeter) thick welded with angle iron frame 30 X 30 X 5 mm (thirty into thirty into five millimeter) so as to give a fair finish including centering, shuttering, strutting and propping etcetera with wooden battens and ballies, in all heights of propping and centering below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Foundation, footings basis of columns etcetera and mass concrete as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing form work with steel plates 3.15 mm (three point fifteen millimeter) thick welded with angle iron frame 30 X 30 X 5 mm (thirty into thirty into five millimeter) so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies, in all heights of propping and centering below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Flat surfaces such as soffits of suspended floors, roofs, landings and the like floor etcetera upto any thickness as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing form work with steel plates 3.15 mm (three point fifteen millimeter) thick welded with angle iron frame 30 X 30 X 5 mm (thirty into thirty into five millimeter) so as to give a fair finish including centering, shuttering, strutting and propping etcetera with wooden battens and ballies, in all heights of propping and centering below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Columns, pillars, posts and struts square rectangular or polygonal in plan as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing form work with steel plates 3.15 mm (three point fifteen millimeter) thick welded with angle iron frame 30 X 30 X 5 mm (thirty into thirty into five millimeter) so as to give a fair finish including centering, shuttering, strutting and propping etcetera with wooden battens and ballies, in all heights of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Beams, cantilever, girders and lintels. Sides and soffits of beams, beam haunchings, cantilevers, bressumers and lintels upto all depth and in all heights from floor as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing form work with steel plates 3.15 mm (three point fifteen millimeter) thick welded with angle iron frame 30 X 30 X 5 mm (thirty into thirty into five millimeter) so as to give a fair finish including centering, shuttering, strutting and propping etcetera with wooden battens and ballies, in all heights of propping and centering below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Stair cases with sloping or stepped soffits excluding landing, as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing form work with steel plates 3.15 mm (three point fifteen millimeter) thick welded with angle iron frame 30 X 30 X 5 mm (thirty into thirty into five millimeter) so as to give a fair finish including centering, shuttering, strutting and propping etcetera with wooden battens and ballies, in all heights of propping and centering below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Edges of slabs and breaks in floors and walls up to all width and heights as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimetre) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetre), so as to give a fair finish including centring, shuttering strutting and propping etcetera with wooden battens and ballies heights of propping and centring in all height/depth below supporting floor to ceiling upto any height and removal of the same for in-situ reinforced concrete and plain concrete work in vertical surfaces such as walls (any thickness) partitions and the like including attached pillasters, buttresses plinth and string courses and the like floor etcetera as per H.P.P.W.D specification approved drawing , design, as per the entire satsifaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated plain cement concrete 1:6:12 (one cement is to six sand is to twelve graded crushed stone aggregate 40 mm (forty millimeter) nominal size) and curing complete excluding the cost of form work in foundation and plinth as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated plain cement concrete 1:4:8 (one cement is to four sand is to eight graded crushed stone aggregate 40 mm (forty millimeter) nominal size) and curing complete excluding the cost of form work in foundation and plinth as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20 (M-twenty) design mix to obtained the minimum compressive strength of 20N /mm2 (Twenty newton per square millimeter) with cement contents not less than 330 kgs (three hundred thirty kilogram) per cubic metre to give an even smooth surface mechanically mixed and vibrated including curing complete excluding cost of form work and reinforcement for reinforced concrete work in Foundation footings, bases of columns and the like and mass concrete as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20 ( M-twenty) design mix to obtained the minimum compressive strength of 20N /mm2 (Twenty newton per square millimeter) with cement contents not less than 320 kg (three hundred twenty kilogram) per cubic metre to give an even smooth surface mechanically mixed and vibrated including curing complete excluding cost of form work and reinforcement for reinforced concrete work in suspended floor ,roofs , landings , shelves and their supports balconies, beams ,girders , bressumers and cantilevers up to all floor level as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-25 (M- Twenty five) design mix to obtained the minimum compressive strength of 25N /mm2 (Twenty five Newton per square millimeter) with cement contents not less than 360 kgs (three hundred sixty kilogram) per cubic metre to give an even smooth surface mechanically mixed and vibrated including curing complete excluding cost of form work and reinforcement for reinforced concrete work in columns ,pillars, post, struts and the like and mass concrete up to all floor level, as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20 ( M-twenty) design mix to obtained the minimum Compressive strength of 20N /mm2 (Twenty Newton per square millimeter) with cement contents not less than 320 kg (three hundred twenty kilogram) per cubic metre to give an even smooth surface mechanically mixed and vibrated including curing complete excluding cost of form work and reinforcement for reinforced concrete work in stair case (except spiral stair cases) including landings etcetera up to floor all levels as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20 ( M-twenty) design mix to obtained the minimum Compressive strength of 20N /mm2 (Twenty Newton per square millimeter) with cement contents not less than 320 kg (three hundred twenty kilogram) per cubic metre to give an even smooth surface mechanically mixed and vibrated including curing and cost of form work but excluding reinforcement for reinforced concrete work in chajjas not exceeding 10cm. thickness upto all floor level including finishing the exposed surfaces with cement mortar 1:3 (1 cement : 3 Sand) to give a smooth and even surface centring/form work and curing complete excluding the cost of reinforcement. as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20 (M- twenty) design mix to obtain the minimum compressive strength of 20N/ mm2 (Twenty newton per square millimetre) with cement contents not less than of 320 kg (Three hundred twenty kilogram) per cubic metre, mechanically mixed and vibrated including curing complete, excluding cost of form work and reinforcement for reinforced concrete work in walls any thickness but not less than 0.10 (Zero decimal ten) metres thickness including attached pillasters buttresses, plinth and string courses etcetera top of foundation upto all floor level as per H.P.P.W.D specification approved drawing , design, as per the entire satsifaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and laying Damp Proof Course with 100mm (one hundred millimeters) thick cement concrete 1:2:4((one cement: two sand: four graded crushed stone aggregate 12.5mm (Twelve decimal five millimeters nominal size) and curing complete, as required at site as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Applying a coat of hot bitumen (mexphalt 80/100 (Eighty/Hundred)/VG-10 using 1.70 Kgs. (one decimal seven zero Kilogram) per square metre On Damp Proof Course after cleaning the surface with a piece of cloth lightly soaked in kerosene oil complete as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing Tor steel reinforcement of TATA/TISCO/SAIL for RCC work including bending, binding and placing in position complete up to all floor levels with cost of binding wire including carriage of material within all leads, lifts and other incidental and as per the direction of the Engineer-In-Charge .The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Random rubble Masonry/Polygonal rubble masonry un-coursed/brought to courses with hard stone of approved quality in foundation and plinth in cement mortar 1:6 (one cement is to six sand) with leveling up with cement concrete 1:6:12 (one cement is to six sand is to twelve graded stone aggregate) 20 mm (Twenty millimeter) nominal size) including carriage of material within all leads and lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Second class brick work using common burnt clay building bricks in super structure in cement mortar 1:6 (one cement is to six sand) as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Half brick masonry using second class common brunt clay building bricks in super structure above plinth level to floor all levels in cement mortar 1:4 (one cement is to four sand) as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing 40 mm thick panneled shutter with 12mm thick (twelve millimetre) thick unfill panel of pre-laminated board both bwp side phenol bonded of Alpro/Century ISI marked No. IS 12823 (Twelve thousand eight hundred twenty three) exterior/ interior grade Panalled shutters with 40mm (forty millimetre) frame of first class deadar wood for doors including bright finished/ black enamelled iron butt hinghes with necessary screws etcetera complete as per specification approved drawing , design or as per the entire satsifaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing steel glazed doors, windows and ventilators of standard rolled steel sections joints mitred and welded and including iron fitting, including providing and fixing of glass pans with glazing clips and special metal sash putty of approved make complete including applying a coat of read lead paints within all leads, lifts of materials and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Fixed steel window

Side hung window

Top hung windows.

Providing and fixing 40 mm (Forty millimetre) thick second class Deodar wood wire gauge shutters using galvanized MS wire gauge of IS gauge designation 85G with wire of dia 0.56 mm (Zero decimal five six millimetre) for doors, windows and clear story windows including bright finished black enameled iron hings with necessary screws as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing 19mm (ninety milimetre) thick water proof termite resistant commercial board shutter for cup board conforming to IS No. 1659 of UNI PLY GREEN- PLY or its equivalent i/c nikel plates bright finished piano hinges. The shutters fram out side shall be finished with 1mm thick laminationof approved shade and to be painted from inside complete as per Architectural drawngs & specifications. including carriage of materials within all leads and lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing 19mm (ninteen millimetre) thick water proof commercial board of unifly/ or equivalent in shelves / box for cup boards with butt joints and fixing with nails and screws etcetra complete including hard wood edging on exposed edge of boards within all leads, lifts as per the direction of the engineer-in-charge and other incidentals.The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing 6mm thick plain asbestos cement sheet ceiling of approved quality with butt jointing and steel screws (frame work and cover fillets to be measured and paid for separately). The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing 25mm (twenty five millimeters) dia stainless steel curtain rod with brackets, plugs etcetera complete as per H.P.P.W.D specification, approved drawing , design or as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing M.S.( Mild Steel) plain grills of required pattern in window frames etcetera with M.S.Flats,20x5mm ( twenty into five millimeter) and 8 x 8 mm ( eight into eight millimeter) solid square or round bars, fixing to frames with round headed bolts and nuts or by screws or welding as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing anodized aluminum sliding door bolt anodized transparent or dyed to required colour and shade with bolts nuts and screws etcetera complete 250 X 16 mm (two hundred fifty into sixteen millimeter) size as per specifications, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing aluminium tower bolts (barrel type) anodized transparent or dyed to required shade and colour with screws etcetera complete 250 X 10 mm (two hundred fifty into ten millimeter) size as per specifications, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing aluminium tower bolts (barrel type) anodized transparent or dyed to required shade and colour with screws etcetera complete 150 X 10 mm (one hundred fifty into ten millimeter) size as per specifications, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing aluminum handles anodized transparent or dyed to required colour and shade with necessary screws etcetera 125 mm (one hundred twenty five millimeter) size complete as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing aluminum handles anodized transparent or dyed to required colour and shade with necessary screws etcetera 100 mm (one hundred millimeter) size size complete as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing 150mm size oxidized M.S. Double acting spring hinges with necessary screws etc. complete as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing oxidized 200mm size M/S. hooks and eyes complete in all respectcomplete as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and laying 25mm (Twenty millimetre) thick Kota Stone flooring 55x55cm (Fifty five into Fifty five centimetres)(Mirror polished) with 7.5 cm (Seven decimal Five centimetres) wide uniform colour black mandana /Jaislmer yellow marble band, base of cement mortar 20mm (twenty millimetre) thick 1:4(One cement isto Four sand)laid over and jointed with Grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishign complete as per specification approved drawing , design, as per the entire satsifaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

50mm (Fifty millimetre) thick cement concrete flooring 1:2:4 (one cement : two sand: four graded crushed stone aggregate 20mm (Twenty millimetre) nominal size laid in one layer finished with a floating coat of neat cement as per H.P.P.W.D specification, approved drawing , design, as per the entire satsifaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing double charged vetrified tiles of Somany/Orient/RAK or equivalant 600x600mm (Six hundred into Six hundred millimetre) approved shade and colour in flooring, treads of steps and landing laid over 12mm (Twelve millimetre) thick cement mortar 1:3 (One cement isto Three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete as per H.P.P.W.D specification, approved drawing , design, as per the entire satsifaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and laying aspartic ceramic tiles antiskid of Orient/Somany/RAK or equivalent in flooring 300x300mm (Three hundred into Three hundred millimetre) size in treads of steps laid on a bed of 12mm (Twelve millimetre) thick cement mortar 1:3 (One cement isto Three sand) finished with flush pointing in white cement, complete as per H.P.P.W.D specification, approved drawing , design, as per the entire satsifaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Kota stone slab 25 mm (Twenty five millimetre) thick mirror polished kota stone slab in risers of steps,skirting dado and pillars laid on 12 mm (Twelve millimetre) (average) thick cement mortar 1:3 (One cement isto Three sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs including rubbing and polishing complete as per H.P.P.W.D specification, approved drawing , design, as per the entire satsifaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Cement plaster skirting 15mm thick (upto 30cm height) with cement morter 1:3 (1 cement:3 sand) finished with a floating coat of neat cement including rounding of junction with floor complete as per H.P.P.W.D specification, approved drawing , design, as per the entire satsifaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and laying ultra charged vetrified tiles 600x600mmx8mm (Six hundred into six hundred millimetre into eight millimetre) of Nitco /rak /Kajaria /Orient and bell as per approved shade in skirting, risers of steps and dado & pillar laid on 12mm (Twelve millimetre) thick cement mortar 1:3 (One cement isto three sand ) and jointed with neat cement slurry finished with flush jointing in white cement mixed with pigment to match the shade of the slab including rubbing and polishing complete as per H.P.P.W.D specification, approved drawing , design, as per the entire satsifaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

White glazed tiles 6mm (Six millimetre) thick in skirting of IS quality 30x20cm (Thirty into Twenty centimetres) of NITCO/Somany tiles or its equivalent in risers of steps and dado laid on 12mm (Twelve millimetre) thick cement mortar 1:3 (One cement : Three sand) and jointed with cement slurry above plinth level to all floor level as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and laying 20mm.thick granite stone in working top of kitchen / Pantry 20mm(average)thickness base of cement mortar 1:3(1cement: 3 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone i/c rubbing and polishing complete as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing prepainted steel sheet roofing of Tata/ Dura shine/Reliance/ Jindal over steel trusses of 0.60 mm thickness (ISI marked Z-120) over steel truss prepainted galvanized steel and hot diffed metallic zinc coat sheet with top coat of regular modified polystar (RMP) organic coating of 20 micron over 5 (FWE) micron and back coating of polystar 5 (fwe) micron over 5 (fwe) micron primer coating including fixing with prepainted iron jrw hooks, bolts , nuts 6 mm (six millimeter) dia with prepained limpat and rubber washers complete with all accessories as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing factory made ridges or hips 60 cm (Sixty centimetres) over all having proper Gola shape with 0.60mm (Zero decimal Six zero millimetre) thick prepainted steel sheet roofing with hot dipped metallic Zinc coated sheet with top coat of regular modified polyester (RMP) organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating to back coat of polyester of 5 (Five) microns over 5 (Five) microns primer coating of Tata durashine/ Sail/ Reliance/ Jindals steel including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (Six millimetre) diametres with prepainted G.I. limpet and bitumen washers complete with all accessories as required as per H.P.P.W.D specification, approved drawing , design, as per the entire satsifaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing valleys 90cm (Ninety centimetres) over all with 0.60mm (Zero decimal Six zero millimetre) thick pre-painted steel sheet of Tata / Shakti in valleys with hot dipped metallic Zinc coated sheet with top coat of regular modified polyester (RMP) organic coating of 20 (twenty) microns over 5 (Five) microns primer coating to back coat back coat of polyester of 5 (Five) microrns over 5 (Five) microns primer coating of Tata durashine/ Sail/ Reliance/ Jindals steel including fixing with pre-painted iron J or L hooks, bolts and nuts 6mm (Six millimetre) diametres with pre-painted G.I. limpet and bitumen washers complete as per specifications approved drawing , design or as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing M.S. ( Mild Steel) B.P. sheet 2.00 mm (two millimeter) thick in eaves boards/facia/soffits /ceiling including cutting, fixing, jointing with gas/electric welding to steel roof members and applying a coat of red lead primer complete (Base members of steel work shall be measured and laid for separately) as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing 110mm (one Hundred ten milimetre) diameter on wall face P.V.C. (D-plast) rain water pipes 2.2mm ( Two decimal Two millimeter) thick of supreme/Finolex/Prince/ Relpipe/ Reliance having working pressure not less than 4/6 kgs /cm2 (Four /Six kilogram) per square centimeter including filling the joints with approved adhesive complete as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing P.V.C accessories Supreme/ prince/ Finolex for Sewerage pipe conforming to IS No. 14735-99 P.V.C. Plain bend including carriage of material with in all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

P.V.C. Plain bend 110mm nominal bore/diameter.

P.V.C. Plain shoe 110mm nominal bore/diameter.

Providing and fixing PVC clamps ISI marked of approved design with steel screws and rawal plugs etc. complete. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing angle iron door frames (Single rebate) manufctured from M.S angle section of 40x40x5 / 45x45x5mm and M.S. flat 50x5mm as per design and drawing including jamb, lock jamb, beed if required angle threshold of M.S. angles 50x25mm. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Poviding and fixing angle iron door frames (Double rebate) manufctured from M.S angle section of 40x40x5 / 45x45x5mm and M.S. flat 50x5mm as per design and drawing including jamb, lock jamb, beed if required angle threshold of M.S. angles 50x25mm. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing M.S. channels in doors and windows frames manufactured from M.S. channels section 75x40mm M.S. flat 75x5mm combination as per design drawing i/c hinges, jambs, beeds if required threshold of M.S. angles 50x25mm . The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Steel work of TATA TISCO/SAIL welded in built up sections,trusses and framed work,including cutting ,hoisting ,fixing in position and applying a priming coat of red lead paint in beams, joist, channels, angle, tee, flat with connecting plates or angle, cleats as in main and beams, hip and jack rafter fixing in rafter, purlin connects to common rafter in trusses complete as per H.P.P.W.D specification, approved drawing , design, as per the entire satsifaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing M.S.fan clamptype -1 of 16 mm dia M.S. barbent to shape with hooked ends in R.C.Cslab during laying including painting the exposed portion of loop,all as per standard design complete as per H.P.P.W.D specification, approved drawing , design, as per the entire satsifaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Applying priming coat over new steel and other metal surfaces after and including preparing the surface by thoroughly cleaning oil,grease,dirt and other foreign matters sand papering and knotting as required with ready mixed paint of Asian / Nerolac brushing steel primer as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Painting two coats (excluding priming coat) on new steel and other metal surfaces with enamel paint of Asian/ Nerolac brushing to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matters with enamel paint of approval shade as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil,grease,dirt and other foreign matters sand papering and knotting as required with ready mixed paint of Asian / Nerolac brushing wood primer as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Painting two coats(excluding priming coat) on new wood and wood based surface with ready mixed enamel paint of Asian / Nerolac brushing to give an even shade including cleaning the surface of dirt, dust and other foreign matters sand papering and Knotting with enamel paint other than white complete as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

6mm (Six millimeter) thick cement plasters in ceiling with cement mortar 1:3 (One cement: Three sand) for all heights as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

15 mm (Fifteen millimeter) thick cement plaster in single coat on rough side of brick/concretes/ stone walls for interior plastering up to all floor levels including arises, internal angles, chamfers and rounded angles not exceeding 80mm (Eighty millimeter) in girth and finished even and smooth with cement mortar 1:6 (One cement is to six sand) as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

15 mm (Fifteen millimeter) thick cement plaster in single coat on fair side of brick/concretes/ stone walls for interior plastering up to all floor levels including arises, internal angles, chamfers and rounded angles not exceeding 80mm (Eighty millimeter) in girth and finished even and smooth with cement mortar 1:6 (1 cement : 6 sand) as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

15 mm (Fifteen millimeter) thick cement plaster in single coat on fair side of brick/concretes/ stone walls for interior plastering up to all floor levels including arises, internal angles, chamfers and rounded angles not exceeding 80mm (Eighty millimeter) in girth and finished even and smooth with cement mortar 1:5 (1 cement : 5 sand) as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Distempering (two or more coats) with acrylic oil bound washable distemper with Nerolac/ Asian of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Finishing wall with weather proof exterior grade emulsion of approved brand Apex ultima / Asian Paint/ Nerolac/ Berger paint on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth complete as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing plinth protection with 40mm (forty millimeter) thick interlocking paver blocks of NTC with 23 cm dia half round pipe for drainage purpose fixed over cement concrete 1:4:8 bedding of pipe as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing railing for stair case having baluster of 40×40 mm square hollow M.S. pipe SWG-16 guage with a clear height of 85mm at the rate 60mm as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Applying Birla / JK white wall care putty over plaster surface after thoroughly brushing the surface free from mortar dropping, dust, loose material and other foreign matters, sand papered smooth to give final matt finish to the surface complete. as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and laying cement concrete 1:5:10(One cement: five sand: ten graded crushed stone aggregate 40mm (Forty millimeters) nominal; size for bedding for 250 mm (Two hundred fifty millimeter) diameter P.V.C. pipe including necessary form work and curing complete, as per specifications, approved drawing , design or as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and laying 150mm (one hundred fifty millimetre) (to level or slopes) and jointing with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 sand) salt glazed stoneware pipes grade 'A' of the following internal diameters including testing of pipes and joints complete: including carriage of material within all leads, lifts and other incidental and as per the direction of the Engineer-In-Charge .The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing 20mm nominal dia to wall ceiling and floor galvanised mild steel tube ( medium grade ) including all tube fittings such as nipples, elbow, unions, tees and clamp i/c making good the walls ceiling and floor as per H.P.P.W.D specification, approved drawing , design, as per the entire satsifaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing polythene aluminum polythene (P.E.) A.E P.E composite pressure pipe U.V. stabilized with carbon block confirming to I.S. 15450-2004 Flow guard/ Kitec for water supply including clamps at one metre spacing, cutting, fixing and making good the walls etcetera; but excluding the cost of fittings (Internal work) pipes exposed on wall including filling the joints with approved adhesive complete and entire carriage of material with in all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

1620 (20 mm O.D.) pipe

2025 (25 mm O.D.) pipe

Providing and laying in trenches galvanized mild steel tube (medium tube grade) fitting and clamps (earth work in trenches to be measured and paid for separately) as per H.P.P.W.D specification approved drawing , design, as per the entire satsifaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

16mm nominal bore (1620 mm) medium class

Providing and fixing PVC water Storage tank Sintex / Supreme/Finolex tripple layer 500 litres net capacity ISI marked with G.I. inlet and outlet connection, 15mm nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting upto any height above ground level including carriage of material with in all leads , lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Making connection of galvanised steel distribution branch with galvanised mild steel main 20 mm to 40 mm (twenty millimetre to forty millimetre) nominal bore by providing and fixing tee including cutting and threading the pipes complete including carriage of material within all leads and lifts and as per the direction of the engineer-in-charge and other incidentals The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing high pressure PVC spigot and socket, of supreme / Finolex/ Prince class "B" conforming to BS-13592 soil, waste and ventilating pipes ISI marked including fixing with approved adhesive etcetra complete. within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer- in-charge.The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

110mm nominal bore/diameter.

75mm nominal bore/diameter

Providing and fixing PVC clamps ISI marked of approved design with steel screws and rawal plugs etcetra complete within all leads, lifts and other incidentals as per approved specifications drawing, design and as directed by the Engineer- in-charge.The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

110mm nominal bore/diameter.

75mm nominal bore/diameter

Providing and fixing P.V.C accessories Supreme/ prince/ Finolex for Sewerage pipe conforming to IS No. 14735-99 P.V.C. Plain bend including carriage of material with in all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

110mm nominal bore/diameter.

75mm nominal bore/diameter

Providing and fixing PVC tees (Medium class) within all leads, lift and other incidentals as per specifications, approved drawing & design.including carriage of material with in all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

110mm nominal size/diameter.

75mm nominal size/diameter.

Providing and fixing PVC double equal branch with oval access door, of Supreme/ Finolex/ Prince with insertion rubber washer 3mm (three millimetre) thick bolts and nuts ISI marked complete including fixing with approved adhesive etcetera complete as per H.P.P.W.D specification, approved drawing , design, as per the entire satsifaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals.The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

110 mm (One hundred ten millimetre) nominal bore/diametre

75 mm (seventy five millimetre) nominal bore/diametre

Providing and fixing P.V.C. collar of Supreme/prince/ Finolex including fixing with approved adhesive etcetra.complete The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

110mm nominal bore/diameter

75mm nominal bore/diameter

Providing and fixing PVC heal rest Supreme/ prince/ Finolex including filling the joints with approved adhesive mixure complete The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government. .

100mm nominal bore/diameters.

75mm nominal bore/diameters

Providing and fixing PVC Cowl ISI marked including fixing with approved adhesive complete within all leads, lift and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government. .

110mm nominal bore/diameters.

75mm nominal bore/diameters

Providing and fixing PVC plain "Y" junction ISI marked including fixing with approved adhesive complete .The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government. .

110mm nominal bore/diameters.

75mm nominal bore/diameters

Providing and fixing P.V.C. floor trap of Supreme/ prince/ Finolex ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floor etcetra complete including within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

110x75mm (One hundred ten into seventy five millimeter) nominal size/diameter

110x90mm (One hundred ten into nenety millimeter) nominal size/diameter

Providing and fixing vitreous China wash down, water closet squatting pan (Indian type W.C pan) size 580mm (Earth work, bed concrete, foot rest and trap to be measured and paid for separately) as per approved specification and entire satisfaction of Engineer in charge. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

PProviding and fixing P.V.C. 110mm size P or S traps for water closet (squatting pan) including jointing the trap with pan and soil pipe in cement mortar 1:1 (1 cement : 1 sand) as per approved specification and entire satisfaction of Engineer in charge. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing polyethylene / poly propylene 10.00 litres capacity (Dual flush) European standard control low level flushing cistern (sleek plus) of cera/Hindware/ESS ESS/Jaquar of star white/ snow white shade with fittings such as pair of brackets lead valve, syphon 15mm nominal size , PVC, ball valve with polythene float, with push button, couplings for connections with inlet, outlet and over flow pipes, 40mm dia C.P flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet as per approved specification and entire satisfaction of Engineer in charge. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing vitreous china pedestal of Cera / Hindware/ Jaquar and having hole at the back for the reception of pipe including C.I. or M.S. brackets, painted white including cutting holes and making good the same with pedestal but excluding fittings within all leads, lifts and other incidentals .The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing G.I intel connection for flush pipe with W.C Pan as per specifications, approved drawing , design or as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing ISI mark No 10008 CERA/ Hindware/Jaquar flat back 550x400 (Five hundred fifty into four hundred millimetre) vitreous china wash basin white shade with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fittingsas as per specification approved drawing , design, as per the entire satsifaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana GST and all type of taxes imposed by the Government.

Providing and fixing stainless steel kitchen sink of Diamond / Unik/ Prayag big size having size 610x510x200 mm (six hundred ten into five hundred ten into two hundred) of AMC / UNIK/ Diamond of ISI make with drain board and C.P. waste with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fitting . The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing 32mm nominal size diameter rubber plug for wash basin (Heavy duty ). The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing (32mm nominal size) diameters M.I. union for wash basin or sink .The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing 32mm diameters P.V.C. waste pipe of Supreme/finolex/prince for wash basin or sink including brass check nut. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing 32mm dia C.P. Bottle Trap for wash basin and sink .The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing 100mm diametres C.P. Grating of Jal/Jaquar /ESS-ESS (Heavy duty makes ISI marked ) for gully / floor or Nahni trap including fitting in all respect The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing flat back 600x450mm beveled edge mirror of superior glass of Atul/Modi Gaurd mounted on 6mm thick A.C. sheet or ply wood sheet and fixed to wooden plugs with C.P. brass screws and washers etcetra complete. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing C.P.(chromium plated) brass towel rail having size 600x20 mm of Jal/Jaquar/ ESS ESS / cera/ hindware complete with C.P. brass brackets fixed to wooden plugs with C.P. brass screws etcetra complete. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing 600x120mm glass shelf (Heavy duty makes ISI marked IS No. 8931 & 8934) with C.P. brass brackets and guard rail complete fixed to wooden plugs with C.P. brass screws etcetra complete. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing two hole basin mixing Faucet of Jal/ Jaquar/ ESS ESS as per H.P.P.W.D specification, approved drawing , design, as per the entire satsifaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing charomium plated soap dish of Jal / Jaquar/ ESS ESS with C.P. brass brackets fixed to wooden cleats with C.P. Brass screws, as per specification, approved drawing , design, as per the entire satsifaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing 100mm diameters C.P. brass.(Heavy duty ISI marked ) shower rose with 15mm (Fifteen milimetres) or 20mm as per specification, approved drawing , design, as per the entire satsifaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing 15mm dia (fifteen millimetre) diametres C.P. (chromium plated) brass ISI Marked IS No. 8934 of Jal / Jaquar/Cera/ Hindware bib tap (superior or heavy type) with capstan head as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing 15mm dia C.P. brass pillar tap with capstan head of Jal/Jaquar / ESS ESS/ Cera/ Hindson / Ruby with fitting complete in all respect .The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing 15mm diameters C.P. (Heavy duty makes ISI marked is No. 8931 & 8934) stop cock. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing 15mm nominal bore PVC connection pipe with brass union 45cm length, with necessary fittings. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing 15mm diameter brass full way valve with wheel of Jal/Jaquar/ESS ESS with necessary fitting including entire carriage of material with in all leads and lifts and other incidentals.The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing 15mm diameter brass angle valve of Jal/Jaquar/ESS ESS/ Cera/ Hindson/ Ruby with nuts as per approved specifications drawing ,design and as directed by the Engineer-Incharge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing 15mm nominal bore brass valve (Horizontal plunger) type of Jal/Jaquar/ESS ESS/ Hindware/Hindson high pressure with copper plate with necessary fitting including entire carriage of material with in all leads , lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

onstruction manhole with R.C.C. top slab in 1:2:4 (1 cement: 2 sand: 4 graded crushed stone aggregate 20mm nominal size) foundation concrete 1:4:8(1 cement: 4 sand: 8graded crushed/broken stone aggregate 40mm nominal size) inside plastering 15mm thick with cement mortar 1:3 (1 Cement: 3 sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement: 2 sand: 4 graded crushed stone aggregate 20mm nominal size) finished smooth complete including curing and testing inside size 800x800mm x 500mm deep including C.I. cover with frame (light duty single seal pattern–I) 450x610mm internal dimensions .Total weight of cover and frame to be not less than 38 Kgs weight of cover 23Kgs and weight of frame 15 Kgs with 200mm thick brick walls of approved quality in cement mortar 1:3 (1 cement: 3 sand) complete The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Construction manhole with R.C.C. (Reinforced cement concrete) top slab in 1:2:4(One cement: Two sand: Four graded crushed stone aggregate 20mm (Twenty millimetre) nominal size mix foundation concrete 1:4:8(One cement: Four sand: Eight graded crushed/broken stone aggregate 40mm (Forty millimetre) nominal size inside plastering 15mm ( Fifteen millimetre) thick with cement mortar 1:3 ( One Cement: three sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4(One cement: Two sand: Four graded crushed stone aggregate 20mm (Twenty millimetre) nominal size mix finished smooth complete including curing and testing inside size 800x800x1000mm (Eight hundred into Eight hundred into one thousand millimetre) including C.I. cover with frame (light duty single seal pattern -I) 455x610mm (Four hundred fifty five into six hundred and ten millimetre) internal dimensions total weight of cover and frame to be not less than 38 Kgs (Thirty eight kilograms) weight of cover 23Kgs(twenty three kilograms) and weight of frame 15 Kgs (Fifteen kilograms) with 200mm (Two hundred millimetre) thick walls of brick masonry using common burnt clay building brick in cement mortar 1:3 (one cement: three sand) as per H.P.P.W.D specification, approved drawing , design, as per the entire satsifaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Construction of brick masonary chamber for underground C.I. Inspection chamber and bends with common burnt clay building bricks in cement mortar 1:5 (1 cement : 5 sand ) C.I. Cover with frame (light duty ) 455mm x 610mm internal dimensions total weight of cover with frame to be not less than 38kg (weight of cover 23 kg. and weight of frame 15kg) R..C.C top slab with 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size ) foundation concrete 1:5:10 ( 1cement : 5 sand : 10 graded stone aggregate 40mm nominal size) inside plaster 15mm thick with cement mortar 1:3 (1 cement : 3 sand) finished smooth with a floating coat of neat cement on walls and bed concrete Inside dimensions 455 mm x 610 mm x 450 mm deep single pipe line. etc. complete.as per H.P.P.W.D specification, approved drawing , design, as per the entire satsifaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing150x100mm size square stone ware gully trap grade-A complete with C.I. gratings brick masonry chamber in cement mortar 1:5(1 cement: 5 sand) and water tight C.I. cover with frames of 300mm size in side the weight of cover to be not less than 4.53 Kgs and frame to be not less than 2.72 kgs . The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Suraj Parkash Aggarwal