Construction of new Panchayat Ghar at Wanihama Block Ganderbal RGSA,SBM and 14FC

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres:All kinds of soil

Carriage of materials Bricks from Avg 50 Km

Supplying and laying of stone soling hand packed tightly including ramming, watering with all sorts of carriage upto site of work

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All work up to plinth level.1:4:8 (1Cement: 4 fine sand: 8 graded stone aggregate 40mm nominal Size)

Providing and laying in position specified Grade of Reinforced cement concrete excluding the cost of centring, shutering and finishing of all work.1:1.5:3(1 Cement : 1.5 Coarse sand : 3 Graded stone aggregates 20 mm nominal size) Raft/ Plinth Beam

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All work up to plinth level.1:3:6 (1Cement: 3 fine sand: 6 graded stone aggregate 20mm nominal Size)

Centering and shuttering including strutting, propping etc. and removal of form for:

Foundations, footings, bases of columns etc. for mass concrete.

Carriage of Bajri for an average lead of 10 kms

Suspended floors, roofs, landings, balconies and access platforms

Brick work with FPS bricks of class designation 75 in super structure in cement mortar 1:6 (1 Cement : 6 Coarse sand)

Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).

Providing wood work in frames of Doors,windows, clerestory window and other frames,wrought frames and fixed in position using KD Wood

Providing and fixing 30 mm thick glazed shutter for windows and clearstory windows using 10kg/sqm (4mm thick)glass panes including black enamelled ISI marked M.S hinges with necessary screws. KD Wood

Providing and fixing ISI marked flush door shutters confo

Providing and fixing 30 mm thick wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge, KD Wood

rming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood (KD ) and well matched teak face veneers on both faces of shutters. With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws 30 mm thick

Providing and fixing ISI marked aluminum fittings ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade etc. complete :

150 mm tower Bolt

100mm tower Bolt

250mmx16 Aldrop of Link/Godrej or approved make

125 mm Handle

100mm Handle

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforcement of RCC works including straightening, cutting, bending placing in position and binding all complete. TMT bars in Raft and Lintel and corners of Brick wall

Filling by Available excavated earth (excluding rock) in trunches,plinth,sides of fondation etc, in layers not exceding 20 Cm in depth ,consolidation each deposited layer by ramming and watering lead upto 50m and lift upto 1.5 m.

Supplying and filling in plinth with fine sand /Nallah Muck under floors including watering rammiing ,consolidating and dressing complete.

Providing and applying 12mm thick plaster in Cement Mortar 1:6 mix.

Structural steel work welded in built up sections, trusses and frame work including cutting, hoisting fixing in position and applying a priming coat of approved steel primer all complete in angles / flats / tubes / channels etc. & including 2 coats of Wood colour paint on Soffit & eaves Boarding

Providing and fixing of threaded truss bolts of 16 mm dia and 45 cm long with angle iron strip at bottom welded i/c its embedment in concrete as per the directions of site engineer, complete job

Providing colour coated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces),excluding the cost of purlins, rafters and trusses and including cutting to size and shape. 0.50mm thick

Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete. 0.50 mm thick with zinc coating not less than 275 gram/m2

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm

Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement:3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75 mm thick bed of dry brick ballast 40mm nominal size, well rammed.

Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm)

Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m in -All kinds of soil.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2 mm thick

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete.Fixed to openings / wooden frames with rawl plugs screws etc.

Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Granite of any colour or shade

Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood work including frames

Add provision for Signboard/Photograph and unforseen items

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink with drainboard as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required: 610x510mm bowl depth 200mm complete all inclusive.

Providing & Fixing of C.P. Brass single lever basin mixer complete including & making good the walls / Floors wherever required (jaquar or equivalent)

Providing and fixing ball valve (brass of approved quality complete: 20mm nominal bore

P/F PVC pipe heavy duty (Finolex or equivalent ), Water or Vent pipes and necessary bends,junction,inclusive of rubber washers,adhesives,complete job 75 mm dia

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. 25 mm dia

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes i/c ball cock and other fittings and fixtures complete job

Carriage of materials Stone agg 40mm / 20 mm & sand for an avg lead of 12Km by MT

Painting walls with acrylic emulsion paint of approved brand and manufacture to give an even shade two or more coats on new work.

CSC PART

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil

Providing and laying of stone soling 75 mm nominal size duly hand packed with ramming, dressing, watering and compacting all including loading, un-loading, cost and carriage of material involved complete.

Lintel, beams, girders, bressumers and cantilevers.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Brick work with FPS bricks of class designation 75 in super structure in cement mortar 1:6 (1 Cement : 6 Coarse sand) including Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level including carriage

Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level

Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6mm, with 40mm dia, steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer,

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more

Centering and shuttering including strutting, propping etc. and removal of form for:

a) Foundations, footings, bases of columns etc. for mass concrete.

b) Suspended floors, roofs, landings, balconies and access platforms.

12mm Cement plaster of mix: 1:6 ( 1 cement : 6 coarse sand) complete

Structural steel work in single sections, fixed with and without connecting plates, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer and painting all complete welded for door/window frames complete job ( Subject to actual details at per execution)

Dry random rubble masonry with hard stone in foundation and plinth: With bond stone including carriage complete

Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. 11.50.1 In colour such as White, Ivory, Grey, Fume Red Brown

Providing/Fixing of Citizen Information Board and Pre-execution, during execution & post execution photographs complete job

Cement concrete flooring 1:2:4 (1 Cement: 2 coarse sand: 4 graded stone aggregate). 40 mm thick 12.50mm nominal size stone aggregate (crushed)

Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm)

Providing & fixing W C Squatting Pan ( indian type) W c Pan with 100 mm dia PVC " P" trap +10 litre low level PVC flushing cistern including flush pipe, manully controlled device with all fittings & fixture Complete Long pattern W.C Pan of size 580x440 mm

P/F soil waste and vent pipes IS 13592& fittings (IS14735) suitable to rubber ring joints which includes bends, rubber rings,jointing, junctions, etc all fittings complete job 110 mm dia PVC SWR pipes complete job (Type B)

Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required : White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps.

Providing and fixing rectangular high density polyethylene water storage loft tank with cover, con colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support i/c fittings (Water storage tank)

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801,, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This ncludes testing of joints complete as per direction of Engineer-incharge. Internal work concealed fixing the pipe with clamps at 1m spacing including cutting chases and making good the wall etc PN-16 pipe,20 mm dia OD (SDR 7.4)

P/F soil waste and vent pipes IS 13592& fittings (IS14735) suitable to rubber ring joints which includes bends, rubber rings,jointing, junctions, etc all fittings complete job 75 mm dia PVC SWR pipes complete job (Type B)

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

P/F PVC cowel over vent pipe of approved quality type B

P/F 100x75 reducer PVC of approved quality

P/F Door tee 100mm dia pvc of approved make type B

P/F of floor traps 110mm with double chrome plated cover one grated and one closed and all other fittings of required standard quality complete job

P/F brass bib cock of approved quality 15 mm dia of standard brand

P/F brass angle valve of approved quality

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 20 mm nominal size)

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430 x 260 x 350 mm and 340 x 410 x 265 mm sizes respectively including all accessories complete job.

Providing and fixing gun metal Gate valve of approved quality 20 mm nominal bor

Providing and fixing mirror of superior glass ( of approved quality ) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing rectangular shape 453x 357 mm

Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required : White Vitreous China Wash basin size 630x450mm with a single 15mm CP brass pillar traps

Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1cement :4 coarse sand) for stop cock, with C.I. surface box 100x100x75 mm (inside) with hinged cover fixed in cement concrete slab 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size ) including necessary excavation, foundation concrete 1:5:10 (1 cement :5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design. 19.26.1 With common burnt clay (non modular) bricks of class designation 7.5

Carriage of sand for an average lead of 15 kms

ELECTRICAL PART

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch ( Anchor roma urban/ Eq. make), modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required..( Havell/Legrand/Roma urban/ Eq. make as per ISI Standard ).(1.10)

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor ( Havell/Anchor/ Eq. make), single core cable in surface/ recessed medium class PVC conduit as required.

(b) 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

(C) 2 X 4 sq. mm + 1 X 6 sq. mm earth wire

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

Supplying and fixing of following sizes modules, GI box along with modular base & cover plates for modular switches in recess etc as required.

12 Module

6 Module

4 Module

Supply and fixing of 16/20 amp/230 V AC 6 pin sockets with cover plate Anchor Roma urban/SSK NV/Havells/ Eq. make.

Supply and fixing of 16/20 amp/230 V AC one way switch with cover plate Anchor Roma urban/SSK NV/Havells/ Eq. make.

Supply and fixing of 6 amp/230 V AC 5 pin sockets with cover plate Anchor Roma urban/SSK NV/ Eq. make.

Supply and fixing of 10 amp/230 V AC one way switch with cover plate Anchor Roma urban/SSK NV/Havells/ Eq. make.

Supply installation testing and comm. Of 1200 mm ceiling fan Model oyster Metallic Havell make/ Bajaj/Crompton(Flavia) of eq. standard ( strictly as per approved sample)

Supply and fixing of 6 amp/250 V A.C fan dimmer step type 2 module with cover plate Anchor Roma urban/SSK NV/ Eq. make.

Providing and fixing of 9 watt LED Bulb ( LMR) Make:- Anchor/orient/havells/ Equivalent

S/F testing and commissioning Of recessed/ surface mounted ceiling 10/12 Watt LED down lighters philips / Havell/ Bajaj/ Crompton make of eq. standard.

S/F testing and commissioning Of MCB's of the below mentioned capacities in sub main controls legrand C curve Series.

b) 6-32 Amp SP MCB

c) 40-63amp DP MCB

Supplying and fixing of 16 way horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) Make:-Hager/LEGRAND/SSK/Equt.Standard

Supply, laying partly overhead partly underground, testing and comm. Of 16mm 2 core 650/1100 V grade unarmoured Aluminium cable Havell/Eq. standard make.