Building

BILL OF QUANTITIES

Item Description of Item (With brief specification and Quantity Unit Rate In Amount

No. reference to book of Specification) Figures

1 Excavation for foundation upto 1.5 m depth including 256.00 One 157.16

sorting out and stacking of useful materials and Cum

disposing off the excavated stuff upto 50 Meter

lead.(B) Dense or Hard soil

2 Excavation for foundation upto 1.5 m depth including 240.00 One 268.92

sorting out and stacking of useful materials and Cum

disposing off the excavated stuff upto 50 Meter

lead.(C) Hard Murrum

3 Excavation for foundation upto 1.5 m depth including 144.00 One 276.24

sorting out and stacking of useful materials and Cum

disposing off the excavated stuff upto 50 Meter

lead.(D) Soft rock not requiring Blasting

4 Providing and laying cement concrete 1:4:8 (1- 152.00 One 2890.74

Cement : 4- coarse sand : 8- hand broken stone Cum

ggregates 40 mm nominal size) and curing complete

excluding cost of formwork in (A) Foundation and

5 Providing and laying cement concrete 1:3:6 (1- 28.00 One 4152.60

Cement : 3- Coarse sand : 6- crushed stone aggregates Cum

20 mm nominal size) and curing complete including

cost of formwork in (A)Wall Caps / Coping

6 Providing and laying ordinary cement concrete 1:2:4 18.40 One 8518.15

(1- Cement 2- coarse sand : 4- graded stone aggregates Cum

20 mm nominal size) for R.C.C lintel including

finishing smooth with,curing etc. complete including

the cost of formwork but excluding the cost of

7 Providing TMT Bar FE 415 reinforcement for R.C.C. 24136.000 One 77.29

work including bending, binding and placing in Kg

position complete upto floor two level

8 Filling in foundation and plinth with murrum or 288.00 One 301.78

selected soil in layers of 20cm. Thickness including Cum

watering, ramming and consolidating etc. complete.

9 White Stone Bela mesonry work in partition walls 18.40 One 684.49

upto 15 cm thickness in cement Mortar 1:4 ( 1- Cement Sqm

: 4- course sand)

10 Providing and laying cement concrete work 28.80 One 4094.10

1:2:4 (1-Cement : 2- Coarse sand : 4- graded Cum

stone aggregates 20 mm nominal size) and curing

complete excluding cost of formwork and

reinforcement for reinforced concrete work in (A)

Foundations, footings, Base or columns and Mass

Item Description of Item (With brief specification and Quantity Unit Rate In Amount

No. reference to book of Specification) Figures

11 P & L 24" x 24" vitrified 8 mm thick tile flooring 199.20 One 1467.72

over 20 mm (average) base of cement mortar 1:6 ( Sqm

1 cement: 6 coarse sand) on new surface or fixing on

existing flooring by adhesive material including

dismentaling of existing flooring and jointed with

color cement slurry including finised with flush

pointing & cleaning the surface etc. complete for

12 Providing and laying cement concrete 1:2:4 (1- 8.48 One 3805.29

Cement : 2-Coarse sand : 4- graded stone aggregates Cum

20 mm nominal size) and curing complete

excluding cost of formwork in (A) Foundation and

13 Providing and laying cement concrete 1:2:4 (1- 12.80 One 6693.29

Cement : 2- Coarse sand : 4- graded stone aggregates Cum

20 mm nominal size) for reinforced concrete Chhajjas

not exceeding 10cm. thickness upto floor two level

including finishing the exposed surfaces with cement

mortar 1:3 (1-cement, 3 Fine sand) to give a smooth

and even surface centering and formwork and curing

complete excluding cost of reinforcement.

14 Providing and laying ordinary cement concrete 1:2:4 15.20 One 10469.21

(1-Cement 2- coarse sand : 4- graded stone aggregates Cum

20 mm nominal size) and finishing smooth

with,curing etc. complete including the cost of

formwork but excluding the cost of reinforcement for

R.C.C work in (B) COLUMNS: (ii) Having cross-

sectional area more than 0.08 Sq.M and upto 0.18 Sq.M

15 Providing and laying ordinary cement concrete 1:2:4 15.20 One 7665.60

(1-Cement 2- coarse sand : 4- graded stone aggregates Cum

20 mm nominal size) and finishing smooth

with,curing etc. complete including the cost of

formwork but excluding the cost of reinforcement for

R.C.C work in (A) BEAMS :(ii) Having crosssectional

area more than 0.08Sq.M and upto 0.12 Sq.M

16 Providing and Laying ordinary cement concrete 1:2:4 107.20 One 6888.15

(1-Cement 2- coarse sand : 4- graded stone aggregates Cum

20 mm nominal size) and finishing smooth with

curing etc. complete including the cost of formwork

but excluding the cost of reinforsement for R.C.C

work in (iii) Slabs having more than 10 cm and upto

13 cm. thickness

17 Providing & laying ordinary C.C. 1:2:4 (1 cement: 2 24.00 One 6858.71

coarse sand: 4 graded stone aggregate of 20 mm Cum

nominal size) and finishing smoothe with curing etc.

Complete including cost of form work but excluding

cost of reinforcement. for R.C.C. work in (E) Staircase.

Item Description of Item (With brief specification and Quantity Unit Rate In Amount

No. reference to book of Specification) Figures

18 White Stone Bela mesonry block in course in 456.00 One 6129.72

Substructure with stone of approved quality in Cum

cement Mortar 1:6 (1-Cement :6- course sand)

including packing the joints etc. complete.

19 White Stone Bela mesonry block in course in super 387.20 One 6479.69

structure with stone of approved quality in Lime Cum

Mortar 1:6 (1-Cement : 6- course sand) including

packing the joints etc. complete.

20 Providing and Fixing Machine cut, free edges, 191.20 One 2454.70

machine polished Granite stone slab 18 mm thick for Sqm

Doors/Windows Cill and Jambs cladding as per

design including edge finished and 1 cm nosing and

laid on 10 mm thick cement mortar 1:3 ( 1 cement:3

coarse sand) jointed with grey cement slurry

including rubbing and polishing finishing etc

21 20mm thick sand faced cement plaster on walls 1792.00 One 393.03

upto height 10 metres above ground level Sqm

consisting of 12mm thick backing coat of C.M. 1:3

(1-cement : 3-sand) and 8mm thick finishing coat

of C.M. 1:1 (1-cement : 1-sand) etc. complete

including floating coat of neat cement slurry.

22 Providing 15mm thick cement plaster in single 2826.40 One 246.05

coat on Rough (Similar)side of single or half brick Sqm

walls for interior plastering upto floor two level

and finished even and smooth in (i) Cement

mortar 1:3 (1-cement:3-sand) including floating coat

of neat cement slurry

23 P & L 24" x 24" vitrified 8 mm thick tile flooring 656.80 One 1264.41

over 20 mm (average) base of cement mortar 1:6 ( Sqm

1 cement: 6 coarse sand) on new surface or fixing on

existing flooring by adhesive material including

dismentaling of existing flooring and jointed with

color cement slurry including finised with flush

pointing & cleaning the surface etc. complete for

24 Providing and laying Ceramic tiles 6mm thick in 35.20 One 900.29

flooring treads of steps and landing laid on a bed Sqm

of 12mm thick cement mortar 1:3 (1-cement : 3-

coarse sand ) finishing with flush pointing in white

Item Description of Item (With brief specification and Quantity Unit Rate In Amount

No. reference to book of Specification) Figures

25 Providing and laying coloured glazed tiles of the 132.00 One 1488.24

size 300 mm x 200 mm x 8 mm / 300 mm x 450 Sqm

mm x 8 mm in skirting, risers of steps and dedo on

10 mm. thick cement plaster 1:3 (1 cement : 3 coarse

sand) & jointed with white cement slurry.

26 Providing and fixing wash down water closet 8.00 One 1356.81

(European type, W.C. Pan) with integral P or S trap No

including jointing the trap with soil pipe in Cement

Mortar 1:1 (1-Cement : 1-fine sand) (With Seal and

cover )(A) vitreous China Pattern :(i) in white colour

27 Providing and fixing PVC SWR Nahni trap IS 14735 16.00 One 586.27

for drain - 100 mm diameter with jali of the No

following nominal diameter of self cleansing design

with C.I scread down or hinged grating including

the cost of cutting and making good the walls.

28 Providing and fixing washbasin with single hole 8.00 One 1752.87

for pillar tap with C.I. or M.S. brackets painted No

white including sutting holes and making good

the same but including brass waste 32 mm dia

.(A) Vitreous China:(ii) Flat Back washbasin

mm x v 400mm size. (i) In white colour.

29 Providing and fixing standared extruded of 5.76 One 1175.56

alluminium section of size 63mm x 38.10mm x Sqm

1.2mm @ Wt. 0.643 Kg/mt with colour

anodized alluminium frame for ventilation with

5mm thick frosted glass as details etc complete for

30 Providing laying and jointing in true line and 80.00 One 91.84

level 25mm dia. U.P.V.C. Pipe ( SCH- 40) for Rmt

cold water including fittings as approved by

Engineer In Charge. Pipe shall be fixed on the

wall with the help of clamp at every two metre

C/C or shall be concealed as directed including

necessary fittings etc. including testing of pipe

and joints and fixing the same with adhesive

solvent, including cost of all materials.

Item Description of Item (With brief specification and Quantity Unit Rate In Amount

No. reference to book of Specification) Figures

31 Providing laying and jointing in true line and 240.00 One 72.65

level 15mm dia. U.P.V.C. Pipe ( SCH- 40) for Rmt

cold water including fittings as approved by

Engineer In Charge. Pipe shall be fixed on the

wall with the help of clamp at every two metre

C/C or shall be concealed as directed including

necessary fittings etc. including testing of pipe

and joints and fixing the same with adhesive

solvent, including cost of all materials.

32 Providing and fixing screw down bib taps of 16.00 One 186.83

following size.(A) Brass screw down bib tap polished No

bright. (i) 15mm dia.

33 Providing sock pit of 5.00 Cu.M. Volume 8.00 One 3457.27

including excavating and filling brickbats with dry No

masonry work at top for 45cm. height including

covering the top with stone including providing

vatas in C.M. 1:3 with finishing curing etc.

complete as directed.

34 Providing W.S. masonary septic tank inside 8.00 One 28978.22

diemsions 3.0 M x 1.0 x 1.20 M including excavation, No

P.C.C. 1:5:10 0.15m th. concrete at bed, 0.23 m

thick white stone masonary wall in CM 1.6 , 0.15 mt

thick partition wall in CM 1:6, 10 mm th. cement

plaster in CM 1:4, R.C.C. top slab of C.C. 1:2:4

(0.10 mm thick) two Nos. of Inspection cover

made of slab itself of 0.60 x 0.45 mt size

including curing, including fizing PVC 110 mm inlet

and outlet pipe with "T" and vent pipe with cowl as

35 Providing erecting and fixing double coated ISI water 8000.00 One 3.95

tank of required capacity each with all necessary Ltr

fittings and connection etc. complete on terrace

36 Providing and fixing M.S. grills of required 2112.00 One 114.85

pattern to frames of windows etc. with M.S. flats at Kg

required spacings and frame alround, square or

round bars with round headed bolts and nuts or

by screws.including a coat of priming & two coats

37 Providing and fixing 35 mm thick SINGLE 83.20 One 3999.01

SHUTTER FLUSH DOOR using Shutters with both Sqm

size Decorative 0.80 mm thick Laminated, pattern

and design is to be approved by the Engineer

incharge, with Stainless Steel handle size 15 Cm

Long, Tower Bolt size 20 cm, & Stainless steel

Aldrop 25 cm long as directed.

Item Description of Item (With brief specification and Quantity Unit Rate In Amount

No. reference to book of Specification) Figures

38 Providing and fixing window having extruded 100.80 One 1713.70

aluminum Colour anodized section frame main Sqm

outer size 63.50 x 38.10 x 1.95 mm,@ Wt 1.094 Kg

/ Rmt, horizontal two track member size

vertical member of size 61.85 mm x 31.75mm x

1.30 mm @ wt.of 0.659 Kg/mt with sliding

shutters of horizontal member size 40mm x

18mm x 1.29mm @ wt.of 0.456Kg/mt, vertical

member of size 40mm x 18mm x 1.29mm @ wt.of

0.456Kg/mt, @ Wt. 0.457 Kg/mt with 5 mm thick

transparent bronze colour tinted float glass with

powder coated aluminum fittings and fixtures and

transparent silicon sealant glass fixing to frame as per

details etc complete for window.

39 Providing and laying broken chine mosaic 793.36 One 779.70

flooring for terrace using 12 mm to 20 mm Sqm

broken pieces of glazed tiles to be laid over

cement mortar 1:3 to plain or slope and to be

tempered to bring mortar creme out upto surface

using white cement including rounding off

junctions and extending them upto 15 cm

along the wall,clearing with water and oxalic acid

etc. as directed..

40 Providing and fixing stainless steel railing for ramp 70.40 One 2559.85

having one side two hand rail 90cm height and of 32 Rmt

mm dia and baluster 25 mm dia at 60cm C/C and

horizontal pipe of 20 mm dia. as per design

and SS having 304 grade including astening,

hold fast, clumps coach bolts etc. comp. and

other side two hand rail of 32 mm dia fixed on wall

using 25 mm dia supports at 60cm C/C as per design

and SS having 304 grade and 18 gauge pipe

including astening, hold fast, clumps coach bolts

etc. comp as directed by engineer in charge

41 Providing and fixing stainless steel railing (modular 87.52 One 2057.07

type) having hand rail 90cm height and of 50mm dia Rmt

and baluster 32mm dia at 90cm C/C and 3 horizontal

pipe of 20 mm dia. At required spacing as per design

and SS having 304 grade and including astening, hold

fast, clumps coach bolts etc. comp.

Item Description of Item (With brief specification and Quantity Unit Rate In Amount

No. reference to book of Specification) Figures

42 Wall painting (two coats) with plastic emulsion 2496.00 One 123.44

paint of approved brand and manufacture on Sqm

undecorated wall surface to give an even shade

including throughly brushing the surface free from

mortar droppings and other foreign matter and sand

papered smooth including two coats of putty and

two coat of primer of approved brand.

43 Finishing wall with weather proof exterior emulsion 2056.00 One 120.26

paint on wall surface (two coats) to give an required Sqm

shape even shade after thoroughly brushing the

surface to remove all dirt, and remains of loose

powdered materials.etc complete

44 Providing and supplying in standard length ISI 120.00 One 214.15

mark rigid unplasticised PVC pipes suitable for Rmt

potable water with coupler joint including cost of

rings, as per IS specification no. 4985/1988

including all local and central taxes,

transportation, freight charges, octroi, inspection

charges, loading, unloading, conveyance to the

departmental stores and including cost of jointing

meterial etc. complete with lowering laying and

joining including labour, material etc. 110mm

45 Providing and supplying in standard length ISI 120.00 One 109.20

mark rigid unplasticised PVC pipes suitable for Rmt

potable water with coupler joint including cost of

rings, as per IS specification no. 4985/1988

including all local and central taxes,

transportation, freight charges, octroi, inspection

charges, loading, unloading, conveyance to the

departmental stores and including cost of jointing

meterial etc. complete with lowering laying and

joining including labour, material etc. 75mm

46 Providing &Fixing 4.50 Kg Co2 type Fire 8.00 One 5555.00

Extinguisher with all required equipment & Labour No

47 Providing & Fixing 6.00Kg ABC type Fire 16.00 One 2020.00

Extinguisher with all required equipment & Labour No.

48 Providing and fixing Urinal or approved quality 8.00 One 1074.86

including conecting the Urinal with waste No

pipe , tap etc. complete.(A) White earthenware

flat back or corner type size 430mm x 260mm x

49 Providing and fixing chromium plated brass half trun 8.00 One 263.77

flush cock of approved quality including fixing in No

pipe line etc. complete.(ii) 25mm dia.

Item Description of Item (With brief specification and Quantity Unit Rate In Amount

No. reference to book of Specification) Figures

50 Providing and fixing screw down bib taps of 16.00 One 186.83

following size.(B) Brass chromium plated screws No

down Bib Tap. (i) 15mm dia.

51 Filling in plinth with sand under floors including 116.64 One 481.80

watering ramming, consolidating and dressing Cum

One Crore Fifty Five Lakh Eighty Eight Thousand One Hundred Fifty Two Rupees And

I \ We am \ are willing to carry out the work at ……………………… % above \ below percent ( Should be

written in figures and words ) of the estimated rate mentioned above. Amount of My \ Our tender works put as

* Estimated Amount * Estimated Amount

Put to tender Rs…………………… Put to tender Rs……………………

Deduct……..……..% Add……..……..%

In words………………….……………… In words………………….………………

1.The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-

In-Charge for which no extra payment shall be made.

2.The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3.GST and Income tax TDS will be deducted at a source while making payments of bills

4.In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-

10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in

S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the cost

of difference of cement consumption have been deducted from the rate of original item at the rate of input rate

mentioned in all the tender.

Signature of Contractor.

Deputy Executive Engineer Executive Engineer

Panchayat R&B Sub Division Panchayat R&B Division

Visavadar Junagadh