COMPREHENSIVE MAINT AND REPAIR OF FIRE PUMPS, FIRE PIPE LINES, FIRE HYDRANT AND ALLIED WORKS FOR FIRE FIGHTING SYSTEM FOR TECH AND RESIDENTIAL AREA AT IRDE UNDER GE (I) R N D DEHRADUN

Amount

Disconnecting and removing the water and electric connections carefully & dismantling and taking out the Existing Multistage pump Spil casting set of capacity 30 KW to 37.5 KW / 75 HP, Head-54.8 mtr, 2900rpm from base frame including disconnection suction and delivery pipes and shifting to workshop for repair. Dismentling of pump and motor.Varnishing to the motor winding,overhaluing complete after through cleaning all parts of motor by kerocene oil including material and labour of replacement worn out parts it required i.e. CI implellers, CI sleeves, CI bush/bearing, MS coupling with rubber tyre/ star type CI neck ring CI center stage ring, Ball bearing DE & NDE, stud nut, bolt, washer& body packing gasket of pump with necessary welding machine/ grinding work if required for repair of shaft/ pump body & .re-assembling pump on base frame with proper alignment with motor including re-shifting to the same to its orginal location, fixing in position, connecting up electrical and pipe line connection, testing and commisssionig of pump set for satisfactory operation on its full load complete., all as specified and directed by Engr-in-Charge.Note: - (i) Contractor shall take proper precautions while lifting out and removing Motor along with water pump set and acecssories from existing location well so as to avoid any damage . All necessary T&P and equipments required for dismental of the same arranged by the contractor at his own cost. (ii) Expendable stores like cotton waste/cleaning materials lubricants , gland packing metal filling, machinaing and transportation to and fro from site to work shop are deemed to be included in rate quoted. (iii) Minor spares Part required for repair the pump sets,motor,MS pipe,MS Nut, botls, washers ,rubber gasket joints etc and are deemed to be included in rate quoted. (ii) The rates for above items are deemed to include transportation to & fro of pumps/ motors to workshop as approved by Engineer-in-charge for necessary repairs, alignment and testing of pump and motors at workshop. (v) The rate quoted for the item shall include re-metaling of Pump shaft, polishing and grinding and making standard size to match with Gun Metal Bush/Neck-ring. (vi) The quoted rate shall be deemed to include replacement of small/ minor parts i.e. washers, keys for coupling, cable packing ring etc. (vii)Labour elemetns is included in unit rates.

Supply,installetion,testing and commissioning Jockey pump horizontal end suction centrifugal type confirming to IS-12469: 1988 with CI casing, bronze impeller and stainless steel mounted on heavy duty bearing suitable for automatic operation with nonver loading power characteristics for frequent start/stop operations for 440 V, 3 phase ,50 hz 70 m head 180 LPM discharge with base frame and PCC Plate form as per NORMS of company complete including connection, testing and commisssionig of pump set for satisfactory operation on its full load complete., all as specified and directed by Engr-in-Charge.

Supply, installation, testing and commissioning in replacement of UNSV LT panel board kiosk cubical type floor mounted fire pumps i.e Electric terrace pumps (Fire) control panel 415 volts,3 phase,4 wire,dust and vermin proof made of 3 mm thick CRCA sheet powder coated type totally enclosed with 50x6mm angle iron frame including locking arrangement mounted on PCC Plat form 100 mm thick made out of PCC 1:3:6,100 mm thick, 1 Mtr all round the panel board with R,YB Phase indicating lamps LED including Panel wiring with PVC Insulated un sheathed single core, 1100 Volts grade cable with copper conductor, multi stranded of suitable size complete., all as specified and directed by Engr-in-Charge.

Supply, installation, fixing, jointing and testing in replacement of unserviceable cast iron Butterfly valve confirming of IS including rubber gasket and nut bolt with washer for flange joints complete, all as specified and directed by Engr-in-Charge for following bores :- Notes:- The cost of Earth work, joints & jointing materials of the butterfly valve shall be deemed to be included in the quoted rates.

100 mm bore

150 mm bore

Taking out defective sluice valve from main line and opening carefully old defective sluice valve of any description and in any position for and including servicing, over-hauling / greasing etc, and replacement of old unserviceable / worn out parts and reassembling the sluice valve after repair and refixing the same & testing after installation complete, all as specified and directed Engr-in-Charge for following bores :- Note :- (i) The cost of Earth work, joints & jointing materials washers, gaskets ,necessary welding,nut,bolts ,washer and minor parts shall be deemed to be included in the quoted rates but Replacement of the defective parts i.e. cast iron gate & stainless steel spindle of Sluice valve shall be measured and paid for separately as supply only under appropriate items of Schedule ‘A’

100 mm bore

150 mm bore

Supply only stainless steel spindle, heavy duty, threaded, with and including one gun metal check unit suitable for sluice valves of any description dismantled/fixed under appropriate items of Sch `A`

100 mm bore

150 mm bore

Supply, laying, jointing and testing in replacement of UNSV MS water pipe (ERW) 'C' class with 6mm thick,specified & confirming to latest revison of IS with necessary welding,nut,bolts & washer for following size off bore complete, all as per directed by Engr-in-charge. Note :- Excavation will be measured separately.

Supply, laying, jointing and testing in replacement of UNSV cast iron duel plate non return butterfly valves including nuts, bolts, with gasket complete to IS 5312. for following size complete, all as per directed by Engr-in-charge. Note :- Excavation will be measured separately.

Supply, laying, jointing and testing in replacement of UNSV Fire Hydrant valve single headed including flanges, nut, bolt, washer,etc complete, all as per directed by Engr-in-charge. Note :- Excavation will be measured separately.

Supply, laying, jointing and testing in replacement of UNSV RRL Hose pipe type 'A' 15 mtr length, specified & confirming to latest revison of IS etc complete, all as per directed by Engr-in-charge. Note :- Excavation will be measured separately.

Supply, laying, jointing and testing in replacement of UNSV first aid fire hose reel wall mounting swinging type fitted with 20 mm dia 30 m long high pressure hose to IS 5132 with 5 mm outlet gunmetal nozzle with shut off valve (IS 884-1969).etc complete, all as per directed by Engr-in-charge. Note :- Excavation will be measured separately.

Supply, laying, jointing and testing in replacement of UNSV branch pipe gun metal 63mm instaneous inlet, made threaded outlet,15mm bore nozzle short,etc complete, all as per directed by Engr-in-charge. Note :- Excavation will be measured separately.

Supply, installation, testing in replacement of UNSV Bronze/gun metal gate valve, heavy duty, screwed both ends with iron wheel head of size 25mm dia bore complete,all as specified and directed by Engr-in-Charge. Note :- Excavation will be measured separately.

Supply, laying, jointing and testing in replacement of UNSV Gun Metal air release valve of size 25 mm dia bore with socket welding in position.etc complete, all as per directed by Engr-in-charge. Note :- Excavation will be measured separately.

Supply, laying, jointing and testing in replacement of UNSV pressure switch (for operation at 0-15 kg/cm2) with required fittings and accessories complete, all as per directed by Engr-in-charge. Note :- Excavation will be measured separately.

Supply, installation, testing in replacement of UNSV water pressure gauge 4" dia range 0-14 Kg per cm square complete,all as specified and directed by Engr-in-Charge.

Supply, installation, testing in replacement of UNSV Air vessal 300 mm dia one mtrs height complete,all as specified and directed by Engr-in-Charge.

Supply, laying, jointing and testing in replacement of UNSV hose box made of 18 gauge MS sheet having a minimum size of 800mm x 600mm x 250mm with double door with 4mm thick glasses and door frame made of 16 gauge MS sheet painted fired out side and brilliant white inside yard including necessory MS hanging suitable frame for hose box where ever required complete, all as specified & directed. by Engr-in-charge

Supply, installed, jointing and testing in replacement of unserviceable Foot Valve of size 150 mm (6”) dia. of cast iron non return valve both ends flanged conforming to IS 4038, complete all as specified and directed by Engr-in-Charge.

Excavation in trenches, not exceeding 1.5 mtr wide and not exceeding 1.5 mtr deep in soft/loose soil including forming sides and bottom surface to required levels/slops/gradients etc. complete, all as specified and directed by Engr-in-charge Note:- The disturbed surface of roads/paths/plinths etc. shall be repaired and quoted rates deemed to include this aspect.

Excavation in trenches, not exceeding 1.5 mtr wide and not exceeding 1.5 mtr deep in hard/dense soil including forming sides and bottom surface to required levels/slops/gradients etc. complete, all as specified and directed by Engr-in-charge Note:- The disturbed surface of roads/paths/plinths etc. shall be repaired and quoted rates deemed to include this aspect.

Returning, filling in including spreading leveling, watering and well ramming in layers not exc 25 cm thick after the cable have been laid tested complete all as specified and as directed by Engineer-in-Charge

Removal of excavated surplus soil to a distance not exc. 50 Mtrs and depositing where directed at a level not exc 1.5 meters above the starting point complete all as specified and as directed by Engr-in-Charge

Supply, laying, jointing and testing in replacement of UNSV XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with aluminium conductor 1100V grade cross section area of the following size including making necessary connection, with busbar/MCCB/DB's & testing complete all as specified and directed. Note :Excavation, earth work ,sand & brick will be measured & paid separately.

16 Sqmm 4 core

25 Sqmm 3½ core

Supply, laying, jointing and testing in replacement of UNSV PVC insulated, PVC sheathed cable galvanized steel strip or wire armoured, electric control cables (Heavy duty) with stranded copper conductor 1100V grade cross section area on surface of wall/ceiling/roof /floor with proper cliping etc of the following size including making necessary connection, with busbar/MCCB/DB's & testing complete all as specified and directed.

1.5 Sqmm 2 core

1.5 Sqmm 3 core

1.5 Sqmm 4core

Material and labour for earthing complete with galvanized steel earth plate electrode 600mm X 600mm X 6mm buried directly in ground vertically to a depth not less than 2.25 meter below normal ground level (with top edge of earth plate not less than 1.5 meter below ground level) connected to galvanized iron earth lead 32X 6 mm GI strip, (main earthing lead ) by means of galvanized bolts, nuts and washers all as shown in electrical plate No . 3 of MES Schedule Part-I (2009) with connected to earth test point & to main switch board with & including adequate quantity of charcoal dust and common salt alround earth plate & 40 mm dia GI pipe light grade for earth lead protection pipe for suitable length and GI pipe 20 mm dia light grade for watering pipe with funnel & wire mesh incl necessary excavation and earth work in any type of soil, and PCC (1: 3 : 6) type C-1 (using 20 mm graded black trap/ granite/ Basalt stone aggregate) for earth pit with 40x40x6 mm mild steel angle iron frame for cover and 40 mm thick precast RCC cover in 1 : 2 : 4 type B1(using 20 mm graded black trap/granite/ basalt stone aggregate) with 3 Nos 8 mm dia TMT bars both ways with 12mm dia round bar handle, complete all as specified & directed .

M & L for PCC 1:2:4 type B1 with 20mm grade stone aggregate as in foundation for outstanding around pole near feeder pillar/LT panel foundation of stays, including form work, fair finishing to exposed surface complete all as specified and as directed by Engr-in-Charge.

M&L for PCC 1:4:8 type D2 with 40 mm graded stone aggregate as in foundation for hard standing around pole & near feeder pillar/LT panel foundation of stays, including form work, fair finishing to exposed surface complete all as specified and as directed by Engr-in-Charge.

Dismantling & taking out unserviceable steel & iron items from poles i.e cross arms, bracing, supports, clamps and back plates etc. including nuts & bolts complete and Supply & fixing cross arms, bracing, supports, clamps and back plates fabricated from structural steel sections including nuts & bolts , washers , welding bending cold or hot , drilling holes for bolts in any shape or size as indicated or directed and inclusive of two coats of aluminium paint over a coat of red oxide primer complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description as in ground floors and pavings complete all as specified and directed

GARG TRADERS