Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹6.7 LAccepted-AOC LOCATION HIMACHAL PRADESH HP | KANGRA | HIMACHAL PRADESH | 176219 | L-1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L-2₹8.4 L+₹1.7 L (25.4%)Rejected-AOC | L-2 | Rejected-AOC L-2 BIDDER | |
| 3 | L-3₹10.8 L+₹4.1 L (60.4%)Rejected-AOC S O SH BHAWANI SINGH VPO BHRAIN TEHSIL BHUNTAR DISTT KULLU HP PIN 175125 | KULLU | HIMACHAL PRADESH | 175125 | L-3 | Rejected-AOC L-3 BIDDER | |
| 4 | Not Admitted-Fee/PreQual/Technical VPO PUID TEHSIL AND DISTT KULLU HP | - | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification | |
| 5 | Not Admitted-Fee/PreQual/Technical V P O JAWALAMUKHI TEHSIL JAWALAMUKHI DISTT KANGRA HP | KANGRA | HIMACHAL PRADESH | 176001 | - | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification |
Tender Value
₹8.0 L
EMD Value
₹20,065
Closing Date
20 Mar 2021, 5:00 pmClosed
Superintending Engineer (op) Circle HPSEBL Kullu
O/o The Superintending Engineer (OP) Circle HPSEBL Kullu
Renovation and Repair of HPSEBL Rest Camp at Manikaran under ESD Jari in district Kullu (HP).
2021_HPSEB_45092_1
NIT-14-8357-68
Open Tender
Civil Works
Turn-key
180 days
Manikaran
Please refer Tender documents.
9 documents required · 9 mandatory
₹1,120
The Sr Executive Engineer ED HPSEBL Kullu
₹20,065
11 Aug 2021
5 Mar 2021
23 Mar 2021
5 Mar 2021
20 Mar 2021
5 Mar 2021
Amount
Cutting in earth work and disposal of excavated earth up to a lead of 20 mtr. PW+JW-50 % each.
Excavation in foundations, trenches etc. in earth work , lift upto 1.50 mtr stacking the excavated soil not more than 3 mtr clear from the edge of the excavation and then returning the stacked soil in 15 cm layers when required in to plinths sides of foundations etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed with in a lead of 20 mtr PW+JW-50 % each.
Providing and laying cement concrete 1:6:12 (1 cement :6 sand : 12 graded stone aggregate 40mm nominal size ) and curing complete excluding cost of form work in foundation and plinth.
Random rubble masonary/ polygonal rubble masonary (uncoursed brought to courses) with hard stones of approved quality in foundation and plinth inculding levelling up with cement concrete 1:6:12 (1 cement: 6 sand :12 graded stone aggregate 20 mm nominal size )In cement mortar 1:6 (1 cement: 6 sand) in Breast walls and Retaining walls.
Constructing Course rubble hammer dressed 'U' shape open surface drain with side wall. 15x22 cm in cement mortar 1:6 (1 Cement : 6 Sand) and inside plastring with cement plaster 1:3 (1 Cement:3 Sand) including earth work and laying 10 cm cement concrete in 1:5:10 (1 Cement : 5 Sand : 10 graded stone aggregate) of 40 mm nominal size and 7.5 cm cement concrete 1:2:4 (1 Cement : 2 Sand : 4 Graded stone aggregate of 20 mm nominal size) and finished with a floating coat of neat cement complete as per standard design.
Repair to plaster in patches of 2.50 Sqm. and under 10 to 15 mm thick including cutting the patch in proper shape and replastering the surface of the wall including disposal of rubbish to the dumping ground within a lead of 20 metres with:-Cement Mortar 1:4(1 Cement : 4 Sand).
15 mm cement plaster in single coat on rough side of brick/conc/stone walls for interior plastering upto floor two level i/c arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80 mm in girth and finished even and smooth in C.M. 1:4.
Providing and laying cement concrete 1:2:4 (1 cement:2 Sand:4 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work in. For plinth protection.In foundation and plinth.
Removing dry or oil bound distemper by washing and scraping and sand papering the wall surface smooth i/c necessary repairs to scratches complete.
Applying Birla White wall care putty over plaster surface after throughly brushing the surface free from mortar drops, dust, lose materials and other foreign matter sand papered smooth to give final matter finish to the surface complete.
Wall Painting (two coats) with acrylic emulsion paint of approved brand and manufacture for interior grade on undecorated concrete/stone/plastered wall surfaces to give an even shade i/c throughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth i/c applying of putty as required for melting the surface i/c preparing the surface.
Finishing wall with weather proof exterior grade emulsion of approved design (Apex Ultima) or its equvalent on undecorated wall surfaces (Two coats) to give an even shade and final finish after throughly finishing the surface to remove all dirt,dust and other foreign matter etc including sand papered smooth complete.
Painting two coats (excluding priming coat) on previously painted wood and wood based surfaces, with readymixed paint, brushing to give an even shade i/c cleaning of all dirt, dust and other foreign matter , sand papering and stopping.
Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete.(PRINCE MAKE).110 mm dia.
Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc. complete.(PRINCE MAKE) 110 mm dia.
P/F fly proof galvanised M.S. wire gauge of IS gauge designation 140 g with wire of dia 0.71 mm to windows and clerestory windows including 60*20 mm beading of 2nd class deodar wood.
Providing wood work in trusses, purlins, rafters, posts, post plates and the like wrought framed, hoisted and fixed in position. 2nd class deodar wood.
Providing and fixing commercial ply wood celing of approved quality with butt jointing and nails(frame work and cover fillets to be paid for separately).6 mm thick.
Providing and Fixing plain square edged cover fillets (beading) 40X12 mm section with wood screws in ceiling and lining including mitring at junctions: 1st class Kail Wood.
Providing eaves board 100 mm x 25 mm. thick including fixing in position 2nd class deodar wood.
Providing corrugated G.I sheet roofing fixed with galvanised iron J.or L. hooks bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers filled with white lead complete excluding the cost of purlins refters and trusses. 0.63 mm thick (TATA/JINDAL MAKE).
Providing ridges or hips 60 cm over all in plain with galvanised iron G.I.sheet J or L hooks. bolts and nuts 8mm dia G.I. Limpet and bitumen washers copmlete: 0.63 mm thick (TATA/JINDAL MAKE).
Providing and fixing stainless steel kitchen sink of approved standard ISI make with drain board and C.P. waste with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fitting. (JINDAL MAKE).610 x460 mm with boul depth 200 mm (JINDAL MAKE).
Providing and fixing 600mm x 120 mm glass shelf with C.P. Brass bracket and guard rail complete, fixed to wooden pluges with C.P. Brass screws. (ESS ESS Make).
Providing and fixing C.P. Brass waste for wash basin or sink :- 32 mm.
P/F C.P. Brass Bib Tap with Capstan Head (ESS ESS Make).15 mm dia.
Providing and fixing charomium plated brass soap dish with C.P. Brass brackets fixed to wooden cleats with C.P. Brass screws :- (ESS ESS Make).
Providing and fixing 600mm x 450 mm bevelled edge miror of superior glass mounted on 6mm thick A.C. Sheet or plywood sheet and fixed to wooden plugs with C.P. Brass screws and washers. (MODI GUARD).
Providing and fixing 100 mm dia cromium plated grating of superior quality for floor, gully or nahani trap.
Providing and fixing 10.0/12.50/15.00 litres vitreous China low level flushing cistern with a pair of C.I. or mild steel brackets, complete with fitting such as lead valve less syphon, 15mm nominal size brass ball valve with polygthene float, C.P. Brass handle, unions and couplings for connections with inlet, outlet and overflow pipes, 40mm dia C.P. flush bend including cutting holes in walls and making good the same and connecting the flush beng with cistern and closet (overflow pipe to be measured and paid for separately). (CERA MAKE).
P/F CP Brass pillar tap with capsten head (ESS ESS Make)-15mm dia.
Providing and fixing C.P. brass angle valve/cock 15mm without Nuts and pipe(ESS ESS Make).
Providing and fixing P.V.C connection with brass unions :-(CERA MAKE). 300/450mm length :-15 mm nominal bore
Applying priming coat over new steel and other metal surfaces after and including preparing the surface by thoroughly cleaning oil grease dirt and other foreign matter and scoured with wire scrapers and sand paper complete.
Painting one or more coats on G.I Sheets with readymix paint of approved brand and manufecture on Painting and Polishing old work to give an even shade. White, grey, green shade.
Providing and laying in trenches, galvanised mild steel tubes (medium grade), tube fittings (earth work in trenches to be measured and paid separately) :-(JINDAL MAKE).15 mm nominal bore.
Providing and Fixing 10mm thick anti skid watervproof stain and impact resistant heavy duty vetrified tiles Nitco or equivalent (600X600X10) mm manufactured of approved shade and colour in flooring , treads of steps and landings laid over 12mm thick Cement Mortar 1:3 (1cement :3 sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete.(SOMANY MAKE).
White Glazed Tiles 6mm Thick in skirting risers of steps and Dado 12mm thick Cement Mortar 1:3 (1cement:3sand) and jointed with Cement Slurry (SOMANY MAKE).
Extra for laying white glazed tiles in skirting, risres of steps and dado where they are required to be cut only area of portion of cut tiles to be measured. (SOMANY MAKE).
Providing and fixing PTMT jet spray of approved quality and colour with 1.5 mtr. tube.
Providing and fixing plastic seat (Solid / Hollow type) and cover for wash down water closet with C.P. Brass hinges and rubber buffers : Solid type-White plastic seat and cover.
Providing and fixing vitreous China wash down,water closet (European type. W.C. pan) with integral 'P' or 'S' trap including jointing the trap with soil pipe in cement mortar 1:1(1 cement : 1 sand) (Seat and cover to be measured and paid for separately):-Ordinary closet.
Prem Singh
RANDHIR JAMWAL
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .