Balance work for M/T on Segli to Burahta Road km. 0/00 to 7/500(SH Retaining walls, Breast walls, V-Shape drain, road Marking with Hot Applied Thermoplastic Compound, Road Stud, Delinator etc.) Under NABARD RIDF-XXVII

Earth work in excavation for foundation of structure up to any depth as per Drawing and Technical Specification clause 305.1 including setting out construction of shoring and bracing removal of stumps and other deleterious material and disposal upto any lead Dressing of sides and bottom and back filling with excavated suitable material. The rate are inclusive of Octroi , royality , malkana , toll tax , sale tax or other taxes imposed by the Government , but excluding GST and including entire carriage of material within all leads and lift as per entire satisfaction and direction of Engineer - in - Charge.

Providing and Laying concrete for plain/reinforced concrete in open foundations P.C.C plain cement concrete nominal mix 1:5:10 (one cement :five sand : ten graded stone aggregate 40 mm (forty millimetre) aggregates complete as per drawing and technical specification clauses 802, 803, 1202 and 1203. The rate are inclusive of Octroi , royality , malkana , toll tax , sale tax or other taxes imposed by the Government , but excluding GST and including entire carriage of material within all leads and lift as per entire satisfaction and direction of Engineer - in - Charge.

Back filling behind abutment wing wall and retainling wall complete as per drawing & technical specification clause 1204.3.8 . The rate are inclusive of Octroi , royality , malkana , toll tax , sale tax or other taxes imposed by the Government , but excluding GST and including entire carriage of material within all leads and lift as per entire satisfaction and direction of Engineer - in - Charge.

Providing weep hole in brick masonry/ stone masonry / plain reinforced concrete abutment, wing wall, return wall with 100mm (one hundred millimetre )diametre PVC pipe extending through the full width of the structures with slope of 1V:20H (one vertical isto twenty horizontal) towards drawing face complete as per drawing and technical specifications clauses 614,709,1204.3.7 . The rate are inclusive of Octroi , royality , malkana , toll tax , sale tax or other taxes imposed by the Government , but excluding GST and including entire carriage of material within all leads and lift as per entire satisfaction and direction of Engineer - in - Charge.

Construction of V-shape drain with cement concrete 1:3:6 (one cement : three sand : six graded, crushed stone aggregate) 20mm (twenty millimeter) nominal size with thickness of concrete as 10cm (ten centimeter) and size of drain 45x25cm (forty five into twenty five centimeter) and curing complete including cost of form work consisting as per standard drawing and HP.PWD specification. The rate are inclusive of Octroi , royality , malkana , toll tax , sale tax or other taxes imposed by the Government , but excluding GST and including entire carriage of material within all leads and lift as per entire satisfaction and direction of Engineer - in - Charge.

Providing and fixing of road stud 100 x 100 mm (one hundred into one hundred millimetre) die cast in aluminium, resistant to corrosive effect of salt and grit, fitted with lense reflectors, installed in concrete or asphaltic surface by drilling holes 30 mm ( thirty millimetre) upto a depth of 600 mm ( six hundred millimetre) and bedded in a suitable bituminous grout or epoxy mortar, all as per BS:873 (Part 4) 1973. The rate are inclusive of Octroi , royality , malkana , toll tax , sale tax or other taxes imposed by the Government , but excluding GST and including entire carriage of material within all leads and lift as per entire satisfaction and direction of Engineer - in - Charge.

Supplying and installation of delinator (road way indicator , hazard markar , object markar) , 80-100 cm (eighty to one hundred centimetre) high above ground level . painting black and white in 15 cm (fifteen centimetre) wide strips , fitted with 80x100 mm (eighty into one hundred millimetre) rectangular or 75 mm (seventy five millimeter) diametre circular reflectorised panels at the top . buried or pressed into the ground and conforming to IRC : 79 and the drawings. The rate are inclusive of Octroi , royality , malkana , toll tax , sale tax or other taxes imposed by the Government , but excluding GST and including entire carriage of material within all leads and lift as per entire satisfaction and direction of Engineer - in - Charge.

Providing and laying of hot applied thermoplastic compound 2.5 mm (two point five millimetre) thick including reflectorising glass beads @ 250 gms (at the rate two hundred fifty grammes) per squaremetre area, thickness of 2.5 mm (two point five millimetre) is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes. The rate are inclusive of Octroi , royality , malkana , toll tax , sale tax or other taxes imposed by the Government , but excluding GST and including entire carriage of material within all leads and lift as per entire satisfaction and direction of Engineer - in - Charge.

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm (one point five millimetre) thick supported on a G.I. pipe 50 mm (fifty millimetre) dia metre firmly fixed to the ground by means of properly designed foundation with M15 (M- fifteen) grade cement concrete 450 mm x 450 mm x 600 mm (four hundred fifty into four hundred fifty into six hundred millimetre), 600 mm (six hundred millimetre) below ground level as per drawings and Technical Specification Clause 801. The rate are inclusive of Octroi , royality , malkana , toll tax , sale tax or other taxes imposed by the Government , but excluding GST and including entire carriage of material within all leads and lift as per entire satisfaction and direction of Engineer - in - Charge.

Providing and fixing of typical NABARD maintenance sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm (one point six millimetre) thick, top and middle plate duly welded with MS flat iron 25mm x 5m ( twenty five into five millimetre) size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm (twenty five into twenty five into five millimetre). The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 Nos (two number) . 75mm x 75 mm (seventy five into seventy five millimetre) of 12 ( tweleve) SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm (four hundred fifty into four hundred fifty into six hundred millimetre), 600 mm (six hundred millimetre) below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm ( forty seven into forty seven millimetre) of 12 ( tweleve) SWG steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1 . The rate are inclusive of Octroi , royality , malkana , toll tax , sale tax or other taxes imposed by the Government , but excluding GST and including entire carriage of material within all leads and lift as per entire satisfaction and direction of Engineer - in - Charge.

Compatibility Report for BOQ(2).xls

Run on 1/20/2024 14:42

The following features in this workbook are not supported by earlier versions of Excel. These features may be lost or degraded when you save this workbook in an earlier file format.

Significant loss of functionality

Any effects on this object will be removed. Any text that overflows the boundaries of this graphic will appear clipped.

'BoQ1'!A1:II82

Minor loss of fidelity

Some formulas in this workbook are linked to other workbooks that are closed. When these formulas are recalculated in earlier versions of Excel without opening the linked workbooks, characters beyond the 255-character limit cannot be returned.