CONSTRUCTION OF ANGANWADI BUILDING 168 IN WARD 15 VENMONEY GRAMA PANCHAYATH

Amount

Stone for masonry work

Through and bond stone size 24 x 24 x 39cm

Carriage of Soling stone & masonry stone

Sundries

Portland Cement

Coarse sand (zone III)

Structural steel such as tees, angles, channels and R.S. joists

Steel

Red oxide Zinc chromate primer

Carriage

Adjustable span ESO+SI (2.35-3.40)

Adjustable telescopic prop 3 m (2.02-3.75m)

Stone Aggregate(single size):20 mm nominal size

Stone Aggregate(single size): 10 mm nominal size

Carriage of Stone aggregate below 40 mm nominal size

Carriage of Coarse sand

Carriage of Cement

Hire charges of Concrete Mixer 0.25 to 0.40 cum with Hopper

Vibrator (Needle type 40 mm)

Twisted steel/deformed bars

Carriage of Steel

Solid blocks of size 30x20x20cm

Cement

Coarse sand

Wall form panel 1250x450xmm

Corner angle 45x45x5 mm 2.50 long

Column clamp 450x1070 mm

Prop 2 m (2-3.5m)

Fine sand (zone IV)

Fine sand (1 part badarpur sand : 2 parts jamuna sand

Water thinnable cement primer for interior wall surface, having VOC content less than 50 gms/litre

Carriage and sundries

Ceramic Glazed Tiles Ist quality 300 x 300 mm in all shades and designs of White, Ivory, grey, Fume Red brown etc.

Vitrified floor tile 50x50 cm

Pink primer (for wood)

Brass 100 mm mortice latch and lock with 6 levers without pair of handles

Pair Anodised Aluminium lever handles for 100 mm mortice latch and lock

Anodised Aluminium tower bolt (barrel type)300x10 mm

Chromium plated Brass screws 30 mm

Anjili wood scantls

Bright finished or black enameled mild steel butt hinges 100x58x1.90 mm

Bright finished or black enameled mild steel butt hinges 50x37x1.50 mm

Bright finished or black enameled mild steel screws 40 mm

Bright finished or black enameled mild steel screws 20 mm

Anjili wood planks

Float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm)

Synthetic enamel paint in black or chocolate shade

200 mm Aluminium aldrop

Iron hooks & eyes 100 mm

Vitreous China orrisa type w.c. pan size 580 mm

Flushing Cistern P.V.C. 10 lts capacity (low level) (white) (with fittings, accessories and flush pipe)

100 mm S.C.I. trap with vent heel

Vitreous China flat back wash basin 630x450 mm

15 mm C.P.brass tap

C.P. brass waste 32 mm

C.I. bracket for wash basin and sinks

Stainless steel kitchen sink - without drain board 470x420 mm bowl depth 178 mm

Chlorinated Polyvinyl - Chloride (CPVC) pipe 15 mm outer dia

Stone aggregate below 40 mm nominal size

Chlorinated Polyvinyl - Chloride (CPVC) pipe 25 mm outer dia

PVC door Elbow 110 mm dia

Polyethylene water storage tank with cover and suitable locking arrangemnet

Plastic emulsion paint

48 mm X40 mmX1.5 mm thick Factory made door frame of PVC extruded sections in white, grey or wooden finish

35 mm thick factory made solid panel PVC door shutter of single piece extruded profile non decorative finished (Matt finished)

Powder coated M.S. butt hinges 100 mm X58 mm X 1.9 mm

Mild Steel round bar above 12 mm dia

Flats up to 10 mm in thickness

Rawl plug 50 mm (designation 10 nos)

Oxidised mild steel handles 125 mm

Oxidised mild steel screws 25 mm

Stone Aggregate(single size): 40 mm nominal size

Carriage of Stone aggregate 40 mm nominal size and above

Ceramic Glazed Tiles Ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black

PVC pipe 50 mm outer dia.6kgf/cm2

PVC pipe 63 mm outer dia . 6kgf/cm2

PVC vent cowl 63 mm dia