WELCOME MAINT IN OFFRS/JCOS/ORS MD ACCN UNDER ZONE A AREA UNDER GE (A) AHMEDABAD

Demolition of Brick work or stone/boulder masonry, build in cement mortar or cement lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:6 complete all as specified and directed.

M&L for perparation of old decorated surface of walls (plastered/unplastered) including cornices, pilasters etc by brooming down or steel wire brushing, scraping down smoke, soot moulds, moss and effloroscent salts trading oil and greasy spots and applying one coat of white wash on walls all as speciied and directed

All as per item No 3 above but one coat of white wash on ceilings complete all as specified and directed.

All as per item No 3 above but one coat of oil bound emulsion distemper on walls complete all as specified and directed

All as per item No 3 above but two coat of oil bound emulsion distemper on walls complete all as specified and directed

All as per iten No 3 above but one coat of cement base paint on walls complete all as specified and directed.

M&L for complete removal of existing treatment and applying two coats of Oil Bound Distemper over and incl one coat of wall care putty 3mm thick in two layers on wall complete all as specified and directed.

M & L for preparation of old painted wooden surfaces of any description postion and location not otherwise described over 10cms width or girth and applying one coat of synthetic enamel paint (ordinary tint) complete all as specified and directed

All as per item No 9 above but applying one coat of synthetic enamel paint (ordinary tint) on steel surfaces, complete all as specified and directed

Taking down cement or lime plaster of any description from stone or brick walls etc including raking out joints, hacking for key scrubbing down with water and disposing off the rubbish complete all as specified or directed.

M&L for 15mm thick rendering on fair faces of brick/ concrete surfaces in CM (1:4) finished even and smooth without using extra cement complete all as specified and directed.

M&L for 10 mm thick rendering on surfaces other than fair faces of brick/concrete surfaces in CM (1:6) and finished even and smooth without using extra cement complete all as specified and directed

M & L for 10mm thick rendering on cement concrete as in ceiling with cement mortar 1:3 complete all as specified and directed.

M&L for preparation of the newly plastered surfaces of walls & applying two coats distemper oil- emulsion , white or tinted over a coat of primer surfaces of wall complete all as specified and directed.

M&L for preparation of new plastered surfaces on walls and applying two coats of cement based paint over one coat of Primer on walls complete all as specified and directed.

All as per item no 16 above but three coat of white wash on walls complete all as specified and directed.

M&L for preparation of new surfaces of ceiling plastered sheet and applying three coat of white wash complete all as specified and directed

S & F in repair Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed

Repair of steel window shutter not exc 1 Sqm each by replacing projected type unserviceable hinges with welding new hinges or welded of existing broken hinges and handles to window frames easing of shutter top proper closing with oiling to hinges and painting at welded portion to match the existing surface complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden or metal frame including punching or drilling out old glazing pins/spring clips complete all as specified and directed.

S&F in repair 3mm thick frosted glass panes and glazing with oil putty & pins/spring pins complete in squares n.exc 0.50 sqm each panes complete all as specified and directed

S&F in repair for 25 mm harrison rail/curtain rails mild Stainless steel with fixing brackets stops fixed in repairs complete all as specified and directed.

Taking down chowkats or frame with shutters (without taking off shutters from the frame) exc 1.5 sqm and n exc 4.0 sqm each complete all as specified and directed.

Taking down chowkhats or frames area not exc. 1.50 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.

Taking down shutter of any description but exc 1 sqm and n. exc. 2 sqm each complete all as specified

Taking down shutters of any description not exceeding 1 Sqm complete all as specified adnd directed.

S&F 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides incl decorative laminated sheet on both faces complete all as specified and directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately)

S&F 2nd hard wood 35mm thick glazed, and skeleton shutters open rebated & prepared to receive, glass, gauge etc. divided into squares with plain chamfered or rounded mitred and rebated any numbers and size of members of shutters as specifed in SSR Part I, Section 8, clause 8.24(a); supllied and fitted to chowkahts complete all as specified and directed.

S&F 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S & F 100 mm long mild steel butt hinges, medium weight cold rolled complete all as specified and directed.

S&F 150 mm size aluminium anodised door handles complete all as specified and directed.

S&F PVC door/cup board shutter 30 mm thick consting of frame made out of MS tube for top and botom rail with PVC sheet strip 20 mm width suitable PVC sheet bedding complete fixing to frame etc all as specified.

Solid PVC door frame of size 50x47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube, supplied and fixed in repair in opening as per specification and drawing complete as directed.

S&F Stainless steel butt hinges medium weight 100mm long complete all as specified and directed.

S&F Aluminium anodised barrel tower bolt of extruded section 200 mm size complete all as specified and directed.

S&F aluminium alloy anodised sliding door bolt with hasp and stapple ( bolt type) and fixing clips of sheet cast or extruded section with fixing bolts and sliding bolt of extruded section 300mm length & dia not less than 12mm with & including 6 Nos of bolts complete all as specified and directed.

S & F of mild steel work such as window guard bars door frme and similar work conforming to Fe – 290 Grade – E 165 complete all as specified and directed.

S & F aluminium anodised ventilator with fixed aluminium frame of size 65 x 40 x 1.98mm thick fixed in vertical position with aluminium vertical members and half portion to be provided with 4mm thick pin head glass and remaining portion to be louvered using 4mm thick pin head glass including necessary channel frame work, including rubber gasket and frame with wire mesh of aluminium,and deco grill ,aluminium beading complete all as specified and as directed.

S&F Aluminium powder coated door frame of size 100 x 44 x 1.98mm thick with one or more rebates and shutters pull and push type or side hung type (with or without aluminium sash bars) comprising of top & lock rails of section 115 x 44 x 1.98 mm thick, botom rail of section 150 x 44 x 1.98mm thick and stiles of section 85 X 44mm X 1.98mm thick including necessary jointing cleat, glazing clip, rubber packing anodized aluminium beading, screws, anodized aluminium fittings such as floor spring or hinges 100mm size with hydrolic door closer, handles 'D' type 125mm, floor door stoppers, tower bolt 200 mm, sliding door bolt 300 mm or mortice lock,hydraulic door closer with 5mm thick tinted glass / preleminated particle board (Novapan) panel and making good of wall surface to match existing surface complete all as specified

S&F aluminium powder coated framed windows, any pattern, fixed/side hung/sliding Three track , AC opening using powder coated aluminium sections of approved make, with or without sash bars, suitable for 5 mm thick glazing and Aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40 mm wire guaze, including necessary rubber packing, joining cleats, glazing clips, aluminium snap beading, handles, locking arrangementsetc, frame of window should be of 1.5 mm thick section & shutter sec including cutting down existing glazed/gauge shutter complete all as specified and as directed Note :Rates include all glazing/aluminium wire cloth, rubber packing, jointing cleats, glazing clips, aluminium snap beading, locking arrangements, handle etc

M&L for Deco grill medium grade of mesh size 75mmx75mm with 6mm square powder coated aluminium bars fixed with suitable aluminum frame of size 37x19x2mm complete all as specified and as directed

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting not exc 10 cm girth complete all as specified and directed

Taking up or down GI tubing 15mm bore pipe and connection including cleaning for refixing or removal from site as directed

S&F 15mm bore pipe medium grade galvanised iron water tube with all fittings laid in floors fixed to wall etc complete all as specified and as directed.

Taking up or down GI tubing 20mm bore pipe and connection including cleaning for refixing or removal from site as directed

S&F 20mm bore pipe medium grade galvanised iron water tube with all fittings laid in floors fixed to wall etc complete all as specified and as directed.

Demolition floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

S&F in repair Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 500 litres capacity hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed

S&F in repair Rotational moulded polyethylene Water storage tanks (cylindrical vertical with closed top) 1000 litres capacity hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed

M & L for non skid ceramic (colored), IS:15622 of approved make & ISI marked 7 to 8 mm thick as in floor area of each tile 0.06 sqm but not exceeding 0.11 sqm , set and jointed in neat cement slurry and pointed in white or colored cement to match incl and over screed bed or beeding layers of mortar 15mm thick in CM 1:6 in floors, complete all as specified and directed. complete all as specified and directed

M&L Polished Glazed Vitrified tiles in IS:15622 of approved make& ISI marked vertical surface of size 300x450x 7 to 8 mm thick set and jointed in neat cement slurry and pointed with white or coloured cement to match for surface of tiles, over 10 mm thick backing coat with cement mortar 1:4 complete all as specified and as directed.

M & L for glazed ceramic coloured tiles of size 300 mm X 200 mm x 7 mm thick as on vertical surface of wall such as skirting, dado, riser etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile incl 10mm thick backing coat of tiles in CM (1:4) complete all as specified and directed.

M&L for non skid matt finish Glazed Vitrified tiles IS:15622 of approved makes& ISI marked, joint free, coloured tiles 8 mm to 9 mm thick (600X1200) area of each tile should be 0.72 sqm , in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile laid over and including 15 mm thick screed bed or bedding layer of cement mortar (1:6) complete all as specified and directed.

All all as per item No 56 above but on vertical surfaces such as skirtings, dados and risers to steps etc incl rendering 10mm thick on of brick work or concrete surfaces in cement mortar 1:4 complete all as specified and directed.

M&L for non skid Glazed Vitrified tiles IS:15622, of approved makes & ISI marked joint free, coloured tiles 8 mm to 9 mm thick (600X1200) area of each tile should be 0.72 sqm in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile laid over and including 15 mm thick screed bed or bedding layer of cement mortar (1:6) complete all as specified and directed.

All as per item No 58 above but on vertical surfaces such as skirtings, dados and risers to steps etc incl rendering 10mm thick on of brick work or concrete surfaces in cement mortar 1:4 complete all as specified and directed.

S&F in repairs shower rose 150 mm dia/square of brass chromium plated fancy type with or without swivel joint suitable for fixing to 15mm bore GI pipe complete all as specified and directed.

S&F in repairs bib taps 15mm bore of cast copper alloy chromium plated fancy type, screwed for iron pipe or for brass ferrule & fixed complete all as specified and directed.

S&F in repair 15mm dia stop valves, fancy type chromium plated with long shank and cup (conncelaed type) cast copper aolly screwed down high pressure, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repair 15 mm bore 2-in-1 bib cock with flange complete all as specified and directed.

S&F CP Sink mixer with regular spout W/M 15mm dia fixed in repair complete all as specified and directed. Make : Prayag Cat No -PIS -55 / Jainko

S&F brass CP bottle trap 32mm for wash hand basin with inlet and outlet screwed for iron pipe, fixed in repairs.

S&F in repairs angle stop valve of cast copper alloy chromium plated (fancy type) screwed for iron pipe of 15mm bore all as specified. Make :- Jainko

S&F wall mounting Mixture valve of Chromium plated, 15mm bore fixed in repairs. Make : Prayag/Ess-ESS/Jainko/GEM

S&F in repair 15 mm dia bore pillar taps cast copper alloy with capstan heads chromium plated fixed in repairs 15mm bore fancy type screwed down, high pressure with long screwed shanks and fly nuts, screwed down for iron pipe or for union.

S&F in repair CP towel rail complete all as specified and directed.

S&F in repair CP towel rack complete all as specified and directed.

S&F stainless steel kitchen plate rack, 1 mm thick of size 900 mm x 780 mm x 222 mm fixed to wall in repairs with brass screws complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan (pedestral pattern), white including connection trap and to flushing pipe, anti-syphnoge pipe etc complete all as specified and as directed.

S&F in repair PVC seat cover for pedestal pan, white closed pattern with flat bottom and cover and mild steel chromium plated or aluminiumised hanging device complete all as directed.

S&F in replacement of PVC cabinet size 650 x 400mm, comprising of looking glass, space for bath soap, shampoo, tooth brush and paste, handle towel rail complete allas specified and as approved of any fo floowing makes :- HINDWARE / CERA / NEYCER / PARRYWARE/CLASSIC complete all as specified and directed.

S&F vitreous china ware wash basin, white flat back size 550 x 400mm excluding taps, waste chain and plug and porcelain stopper but including brackets fixed in repairs complete all as specified and directed.

S&F in repairs sinks with drainage board made of stainless steel 1mm thick sheet plugs, washers, waste coupling and waste pipe, including a pair of cantilever brackets embedded in wall with suitable size of PCC (1:3:6) type C-1 blocks and connecting union to pipe of overall size 915mm x 460mm & bowl size 410mm x 330mm x 160mm all complete as specified and as directed.

S&F 10 ltrs capacity PVC valve less, syphonic action type flusing cistern, low level white with inlet ball valve float and handle including brackets fixed in repairs complete all as specified and directed.

S&F vitreous china water closed (squatting pan), orissa patern size 580 x 440mm white with integral, foot rests an including 'P' trap and lime bedding making doog to floors complete fixed in repairs complete all as specified and directed.

S&F in repair health faucet with one meter tube and hook complete all as specified and directed.(Cat part No BEA-81 of Make-Prayag or its equivalen make).

S & F 15mm size PVC connections with PTMT nuts of length 450mm and fixed in repairs complete all as specified and directed.

S/F grating doom 150 mm size of PTMT (Minimum weight 100 gms) complete all as specified and directed.

S&F 32mm dia PVC waste pipe fixed in repairs. Including Cup bracket complete all as specified and directed.

Taking down CI/PVC/AC soil pipe with fittings from wall, treches of any description including fittings.

S & F 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls incl fittings and fixtures like bend , elbow, Y(equal or unequal),tee etc.

S & F 75 mm bore C I soil waste and vent pipes sand cast, in any length with or without ears with cement jonts fixed to wall incl fittings and fixtures like bend , elbow, Y(equal or unequal),tee etc.

S&F in repairs 75mm bore PVC (SWR) floor trap long body type with grating including jointing with solvent cement.

S&F in repairs 125/110mm bore PVC (SWR) gully trap plain with grating including jointing with solvent cement.

S & F glass shelf assembly straight/corner with chrominium plated brass bars complete Make : Prayag/ Cera/Jainko

Dismantling wall and ceiling boards any thickness including cover fillets complete all as specified and directed.

S&F 4mm thick coloured textured designer ceiling board of size 595X595 mm fixing with screws/clips including Tee grid suspension system of size 600 mm x600 mm type-1 made out of roll framed hot dipped galvanised steel zinc coated of not less than 120 gm/sqm ,main runner shall be 0.3 mm thick of section 24 mmX33 mm cross runner 0.3 mm thickof section 24 mmx25 mm,wall angle shall be 0.63 mm thick of section 24 mmx24 mm grid shall be suspended by 4 mm dia adjustable quick fit hanger rod ,system exposed portion shall be pre painted polyster coated in off white/white in colour complete with material,fixing, jointing etc complete all as specified and directed.

S&F mild steel tubular / rectangluar section as in coloumn, posts, raffetrs beams gasset plate and struts embedding in concrete , and screwing etc complete all as specified and directed.

M&L for 18-20mm thick machine cut Granite, mirror polished, in skirting / dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete or coloured cement to match including 10mm thick backing coat of tiles in CM (1:3) complete all as specified and directed.

S&F in repairs, wash down water colset (wall hung type ) with seat cover of jaquar florentine or equivalent , jaquar catalog no. ONS-WHT-10953BIUFSM (inlusive of brackets), to pedestal pan including all joints, trapete.

Preparation of new or previously untreated wooden surfaces of any description, not otherwise, described, over 10cm width or girth and applying two coats of synthetic enamal paint over a coat of pink primer complete all as specified.

S&F in repairs gypsum cornice fixed ceiling with screw/ adhesive all as specified and directed.

Taking down shutter resecuring, easing and cutting refixing in the same opening shutters of any description exc 1 Sqm and not exc 2 Sqm complete all as specified and directed.

S&F in repair 18/19 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws/nails to timber frame work as in cupbord door/shelves complete all as specified and directed

S & F MS Auto hinges of crank 0 degree & 90 degree, fixed with screws to timber frame complete all as specified and as directed.

S & f in repair SS channel of premium quality for kitchen basket/drawer complete all as specified and directed.

S&F G Profile handle for kitchen cabinet/Cubboard fixed to board complete all as specified and directed.

Dismantling plain or corrugated AC or steel sheeting any guage, of any description and in any position as in roof coverings and S & F pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering / cladding to wall, fixed with L or J hooks complete all as specified and directed.

M&L for preparation of new steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified.

Providing & applying rising damp-proof costing system with single component ready to use damp- proof coating Roff Hydamp : 1. Surface preparation thoroughly brush and clean all laltance, loose particles such as dirt, grease, mortar droppings , release agents, efflorescence, bird droppings , etc. All large volds or hollow portions must be removed and re-plastered , Non - moving cracks having width upto 5 mm must be filled with polymer based brack filler. 2. APPLICATION : Apply the first coat of Dr fixit Damp guard Classic with a paint brush directly on the prepared surfaces by mixing (1 part base : 1 part hardner : 1 part of water). Allow to dry for a minimum 2-3 hrs . Apply on e part of DAMP GUARD mixed chemical and 2 parts of OPC whte cement / Birla putty and make the putty , apply putty on the entire surface area. Allow it to dry for at least 3-4 hours . Apply the Final coat of Dr Fixit Damp guard classic on the entire surface and allow the surface to air cure 48 hours proceeds for Paint