Construction of 220 KV GIS Substation Banbasa Tanakpur

Amount

Construction of 220/33 KV GIS Substation Banbasa,Tanakpur

Part-A (Supply of Material )

Transformer

50MVA, 220/33kV, Three phase transformer including Bushing, first filling of oil, Fibre Optic Temperature Measurement System and complete with all associated accessories.

Nitrogen Injection Fire Prevention & extingusihing system for above transformer.

Online DGA, Multigas type for above transformer.

Oil Storage Tank (15KL)

Oil sampling Bottle 2 ltr.

630KVA, 33/0.433kV, three phase transformer including bushing, accessories and first filling of oil.

245kV GIS Equipments

245kV, SF-6 gas insulated Transformer Bay Module each comprising of SF6 gas insulated Circuit Breaker, Current Transformer, two bus-bar disconnectors one with grounding switch and one without grounding switch, one disconnector with safety grounding switch, high speed fault acting earth switch, surge arrestors (216kV), SF6 gas monitoring system for complete bay, LCC, SF6 ducts and SF6/Air Interface to connect 220/33kV, 50MVA transformer and accessories with GIS etc. to complete transformer bay module.

245kV, SF6 gas insulated Feeder Bay Module each comprising of SF6 gas insulated Circuit Breaker, Current Transformer, two bus-bar disconnectors one with grounding switch and one without grounding switch, line disconnector with safety grounding switch, high speed fault acting earth switch, SF6 gas monitoring system for complete bay, LCC, SF6 ducts and SF6/Air interface and accessories with GIS etc. to complete feeder bay module.

245kV, SF6 gas insulated, metal enclosed Bus Bars each enclosed in bus enclosures running along the length of the switchgear to interconnect each of circuit breaker bay module. Each bus-bar set shall be complete with voltage transformer complete with safety grounding switch.

245kV, SF6 gas insulated Bus Coupler Bay Module comprising of SF6 gas insulated circuit breaker, current transformer, two disconnectors with safety grounding switches, SF6 gas monitoring system for complete bay, LCC etc.

245kV AIS Equipments

245 kV CVT Single ph.

Junction box for above 245kV CVT

216kV Lightning Arrester with counter and leakage meter

245 kV BPI

Miscellaneous Materials (Insulators Strings / Disc Insulators, Hardware fittings, Conductor, 4" IPS Aluminium Tube, Cable Trays, Bay MB, Clamps, Connector including equipments connectors and all accessories etc.

36kV GIS Equipments

36kV, SF6 gas insulated Feeder Bay Module / Panel each comprising of SF6 gas insulated Circuit Breaker, Current Transformers, Potential Transformers, Lightning Arresters, two bus-bar disconnectors one with grounding switch & one without grounding switch, SF6 gas monitoring system for complete bay, control & protection along with associated equipment. Cable termination and accessories with GIS etc. for 33 KV outgoing line Feeder Bay Module.

36kV, SF6 gas insulated Bus Coupler Bay Module comprising of SF6 gas insulated circuit breaker, current transformer, two numbers of disconnectors with earthing switch, SF6 gas monitoring system for complete bay, control & protection along with associated equipment. etc.

36kV, SF6 gas insulated Transformer Bay Module each comprising of SF6 gas insulated circuit breaker, current transformer, Lightning Arresters, two bus-bar disconnectors one with grounding switch & one without grounding switch, SF6 gas monitoring system for complete bay, with cable termination, control & protection along with associated equipments.

36kV, 3-phase or single phase encapsulated unit, SF6 gas insulated, metal enclosed Bus-Bars each enclosed in bus enclosures running along the length of the switchgear to interconnect each of cirucit breaker bay module. Each bus-bar set shall be complete with voltage transformers with safety grounging switch.

36kV, SF6 gas insulated Feeder Bay Module / Panel each comprising of SF6 gas insulated circuit breaker, current transformers, Potential Transformers, Lightning Arresters, two bus-bar disconnectors one with grounding switch & one without grounding switch, SF6 gas monitoring system for complete bay, Cable termination and accessories with GIS etc. suitable for 630KVA 33/0.433kV Station Transformer, control units, control and protection along with associated equipment.

36kV AIS Equipments

33kV BPI

30kV Lightning Arrester

33kV Air Break Switch

Miscellaneous Materials (Insulators Strings / Disc Insulators, Hardware fittings, Conductor, 4" IPS Aluminium Tube, Cable Trays, Clamps, Connector including equipments connectors and all accessories etc.

Complete substation automation system including hardware and software for the substation & remote control stations alongwith associated equipments as per Technical Specifications.

Bay Control Units

220kV System

33kV System

220 KV Control and Relay panel

Circuit Breaker Control Panel

With Auto Reclose

With out Auto Reclose

Line Protection Panel (Main 1+Main 2)

Bus Bar Protection Panel

220kV bus bar protection panel for Main-1 and Main-2

Transformer Protection Panel

PLCC for 220KV Line feeder

Line Traps

2000A, 0.5/1 mH, 40 kA

Coupling device ( Phase to Phase )

HF Cable

Carrier Equipment

for Speech + Protection 1 & 2

for Speech + Data

Protection Coupler

Time Synchronisation Equipment (GPS Clock)

Online Monitoring, Data Acquisitionand ABT Analysis System

ABT meters 0.2s Cl with TCPIP, Optical Communication Port (ABT Meters are the part of C&R Panel. The rates of same may be included in the rates of C&R Panel). The quantity mentioned here for Supply & Erection is for indication purpose only.

DCU & Accessories

Industrial Grade Network Switch -8 Port, unmanaged

UPS 2 KVA online with 30 Min back up on 100% load

Workstation: Application & Database server

Database - Microsoft SQL Server 2016 STANDARD Edition (Latest) / ORACLE (Latest)

MS office - Standard edition (Latest)

MacAfee Virus Scan Enterprise Desktop Edition (Latest) - Per Year

Local Energy Monitoring Software - Professional edition

LAN cable (average one roll per S/S 300 Meters) Cat-06

PVC conduit Pipe - 3/4" ISI Mark

Enclosure for LAN Switch

4G/5G Data enable SIM

Cable 4 Core 2.5 Sq. mm Copper, Armored

SDH/MUX EQUIPMENT

Steel Cabinet with all internal wiring/terminations/MDF and arrangement for dual 48/50V Power supply input

SDH (STM-4 upgradable upto STM-16)/MUX base 19" equipment rack (incl. front cover, cable tray, common cards such as redundant CPU) with arrangement for dual input power supply.

OLTE - 4 Port STM-1 (155 Mbps) Card excluding SFPs

SFP module to support upto 50 km

SFP module to support upto 100 km

Optical Amplifier/Booster equipment

OFC Patch Cords - (Set of 12 Nos.)

Ethernet over SDH (STM-4 upgradable upto STM-16) transport card (with eight 10/100/1000BaseT interfaces)

Minimum 8 Port E1 interface card

Minimum 8 Port 4w E&M Interface card

Minimum 12 Port FXO interface card

Minimum 10 Port FXS interface card

Minimum 4 Port programmable data interface card

Integrated Teleprotection card (4 Commands each)

Engineering Order Wire Phone

Optical Fibre Cable for above OPGW communication

Testing & Maintenance Equipment

Meggar 5 KV (Motorized)

Meggar 15 KV (Motorized)

Automatic capacitor and Tan Delta measuring kit

Thermal Imaging Camera

Digital Multi meter

Leakage tester (Tong type)

Signal generator

Micro-ohm meter

Gapless zinc oxide LA tester

Oil BDV Kit 0-100 KV

SF-6 Gas Evacuating and refilling Plant

Gas Leakge Monitor

Circuit Breaker Analyser

Portable Partial discharge monitoring system

Dew Point Meter

Battery Earth Fault Locator

Primary Injection Set 1000 Amp

Relay Test Kit

Gas Mask

D-Spanner set (Insulated)

Ring-Spanner set (Insulated)

Torque wrench set

Insulating gloves

Helmets

Hydralic Ladder battery operated (Rechrgeable) upto 300KG Capacity and 10 Meters Height

Spliced ladders 5mtr.

Spliced ladders 10mtr.

Spliced ladders 20mtr.

Polyamide or Braided white nylon rope -12 mm

Polyamide or Braided white nylon rope -14 mm

Polyamide or Braided white nylon rope -20 mm

Earth resistance tester

Rubber mat in Control room, Battery Room & LT Panel Room etc. as per Site requirements

Shock treatment chart & artificial respiratory system

First-aid box complete with first filling of required medicines, instruments and tools

Danger / Man on line / Break-Down boards of appropriate size

Rain coat, Gum boot and Safety Harness Belt with adequate straps

Air-conditioner

Split AC (capacity-2T) Max. Star rating

Ventillation system for 220kV GIS Hall

Miscellaneous items

Air Curtain for Control Room Building

Interactive Screen for Control Room Building

LT Switchboard

415V Main Switchboard (MSB)

415V ACDB

220V DCDB

48V DCDB

Batteries

Battery charger system

220V, 100Amps Float Cum Boost Charger

48V, 60Amps Float Cum Boost Charger

250kVA, 440V DG set alongwith AMF control panel

Fire Prevention & Extinguishing System

Fire Detection and Alarm System for 220 kV & 33 kV GIS hall, Control Room Building

45 Ltr. Foam type

CO2 Type Fire Extinguisher 9 kgs

ABC type 10 kgs.

CO2 Type Fire Extinguisher 4.5 kgs

Mechanical Foam Type Fire Extinguisher 9 Ltrs

6 Fire bucket with stand

Sand drum (half size) filled with sand

Illumination sytem

33kV GIS Room / Control Room / Store Room / Offices llumination (LED Type Lights)

Switchyard lighting (LED Type Lights) with mounting accessories

Solar light system for street light (LED Type Lights) with Pole and other mounting accessories

LED Lights for 220kV GIS, High Bay type 170 Watts

1.1kV Aromoured Power Cables (AL) and Aromoured Control Cables (Copper) alongwith multidiameter moulded cable sealing, Lugs, Glands and straight joints, etc.

Power cables Aluminium (XLPE)

3.5Cx300 Sq.mm

Power cable Aluminium (PVC)

3.5Cx70Sq.mm

3.5Cx35Sq.mm

4Cx16 Sq.mm

4Cx6 Sq.mm

Control cable Copper (PVC)

2Cx2.5Sq.mm

4Cx2.5Sq.mm

6Cx2.5Sq.mm

10Cx2.5Sq.mm

33kV Power Cable and accessories

33kV XLPE Copper Power Cables for connecting Transformer to 33kV GIS of size 1 X 630 sq.mm.

33KV Indoor termination suitable for 630 sq.mm. cable

33KV Outdoor termination suitable for 630 sq.mm. cable

33kV XLPE Copper Power Cable for Auxiliary Transformer of size 1 X 185 sq.mm.

33kV Indoor Termination suitable for 185 sq.mm. cable

33kV Outdoor Termination suitable for 185 sq.mm. cable

Grounding/Earthing system

40mm MS rod for earthmat

40mm MS 03 meter electrodes

40mm 3 meter deep driven pipe electrode (treated pit)

MS/GS Flats 75x12

MS/GS Flats 50x6

GS shield Wire

Steel structure

Lattice structure

Pipe structure

EOT Crane

EOT Crane for 220KV GIS Room

Moveable ladder of suitable capacity for 220 KV, 33 KV GIS Room

Mandatory spares as per List indicated in Section "Mandatory spares" of Technical Specifications for following items

220/33kV Transformer

245kV GIS CB

245kV VT GIS Type (3 Nos)

245kV CT GIS Type (3 Nos)

245kV Isolators & ES GIS Type

216kV Surge Arrestor (3 Nos)

245kV Outdoor Termination Kit (SF6 to Air Type) (3Nos.)

llumination system

Optic fibre cable

Fire fighting

Battery

Battery charger

Relay & Protection panels

Substation Automation

LT Switchgear

Common Spares, maintenance

DG Set

245 KV CVT Outdoor Type (3 Nos.)

33kV Indoor Termination (3Nos.)

33kV Outdoor Termination (3Nos.)

Description of Work / Item(s)

Amount

Construction of 220/33 KV GIS Substation Banbasa',Tanakpur

Part-B (Erection of Material )

Transformer

50MVA, 220/33kV, Three phase transformer including Bushing, first filling of oil, Fibre Optic Temperature Measurement System and complete with all associated accessories.

Nitrogen Injection Fire Prevention & extingusihing system for above transformer.

Online DGA, Multigas type for above transformer.

Oil Storage Tank (15KL)

630KVA, 33/0.433kV, three phase transformer including bushing, accessories and first filling of oil.

245kV GIS Equipments

245kV, SF-6 gas insulated Transformer Bay Module each comprising of SF6 gas insulated Circuit Breaker, Current Transformer, two bus-bar disconnectors one with grounding switch and one without grounding switch, one disconnector with safety grounding switch, high speed fault acting earth switch, surge arrestors (216kV), SF6 gas monitoring system for complete bay, LCC, SF6 ducts and SF6/Air Interface to connect 220/33kV, 50MVA transformer and accessories with GIS etc. to complete transformer bay module.

245kV, SF6 gas insulated Feeder Bay Module each comprising of SF6 gas insulated Circuit Breaker, Current Transformer, two bus-bar disconnectors one with grounding switch and one without grounding switch, line disconnector with safety grounding switch, high speed fault acting earth switch, SF6 gas monitoring system for complete bay, LCC, SF6 ducts and SF6/Air interface and accessories with GIS etc. to complete feeder bay module.

245kV, SF6 gas insulated, metal enclosed Bus Bars each enclosed in bus enclosures running along the length of the switchgear to interconnect each of circuit breaker bay module. Each bus-bar set shall be complete with voltage transformer complete with safety grounding switch.

245kV, SF6 gas insulated Bus Coupler Bay Module comprising of SF6 gas insulated circuit breaker, current transformer, two disconnectors with safety grounding switches, SF6 gas monitoring system for complete bay, LCC etc.

245kV AIS Equipments

245 kV CVT Single ph.

Junction box for above 245kV CVT

216kV Lightning Arrester with counter and leakage meter

245 kV BPI

Miscellaneous Materials (Insulators Strings / Disc Insulators, Hardware fittings, Conductor, 4" IPS Aluminium Tube, Cable Trays, Bay MB, Clamps, Connector including equipments connectors and all accessories etc.

36kV GIS Equipments

36kV, SF6 gas insulated Feeder Bay Module / Panel each comprising of SF6 gas insulated Circuit Breaker, Current Transformers, Potential Transformers, Lightning Arresters, two bus-bar disconnectors one with grounding switch & one without grounding switch, SF6 gas monitoring system for complete bay, control & protection along with associated equipment. Cable termination and accessories with GIS etc. for 33 KV outgoing line Feeder Bay Module.

36kV, SF6 gas insulated Bus Coupler Bay Module comprising of SF6 gas insulated circuit breaker, current transformer, two numbers of disconnectors with earthing switch, SF6 gas monitoring system for complete bay, control & protection along with associated equipment. etc.

36kV, SF6 gas insulated Transformer Bay Module each comprising of SF6 gas insulated circuit breaker, current transformer, Lightning Arresters, two bus-bar disconnectors one with grounding switch & one without grounding switch, SF6 gas monitoring system for complete bay, with cable termination, control & protection along with associated equipments.

36kV, 3-phase or single phase encapsulated unit, SF6 gas insulated, metal enclosed Bus-Bars each enclosed in bus enclosures running along the length of the switchgear to interconnect each of cirucit breaker bay module. Each bus-bar set shall be complete with voltage transformers with safety grounging switch.

36kV, SF6 gas insulated Feeder Bay Module / Panel each comprising of SF6 gas insulated circuit breaker, current transformers, Potential Transformers, Lightning Arresters, two bus-bar disconnectors one with grounding switch & one without grounding switch, SF6 gas monitoring system for complete bay, Cable termination and accessories with GIS etc. suitable for 630KVA 33/0.433kV Station Transformer, control units, control and protection along with associated equipment.

36kV AIS Equipments

33kV BPI

30kV Lightning Arrester

33kV Air Break Switch

Miscellaneous Materials (Insulators Strings / Disc Insulators, Hardware fittings, Conductor, 4" IPS Aluminium Tube, Cable Trays, Clamps, Connector including equipments connectors and all accessories etc.

Complete substation automation system including hardware and software for the substation & remote control stations alongwith associated equipments as per Technical Specifications.

Bay Control Units

220kV System

33kV System

220 KV Control and Relay panel

Circuit Breaker Control Panel

With Auto Reclose

With out Auto Reclose

Line Protection Panel (Main 1+Main 2)

Bus Bar Protection Panel

220kV bus bar protection panel for Main-1 and Main-2

Transformer Protection Panel

PLCC for 220KV Line feeder

Line Traps

2000A, 0.5/1 mH, 40 kA

Coupling device ( Phase to Phase )

HF Cable

Carrier Equipment

for Speech + Protection 1 & 2

for Speech + Data

Protection Coupler

Time Synchronisation Equipment (GPS Clock)

Online Monitoring, Data Acquisitionand ABT Analysis System

ABT meters 0.2s Cl with TCPIP, Optical Communication Port (ABT Meters are the part of C&R Panel. The rates of same may be included in the rates of C&R Panel). The quantity mentioned here for Supply & Erection is for indication purpose only.

DCU & Accessories

Industrial Grade Network Switch -8 Port, unmanaged

UPS 2 KVA online with 30 Min back up on 100% load

Workstation: Application & Database server

Database - Microsoft SQL Server 2016 STANDARD Edition (Latest) / ORACLE (Latest)

MS office - Standard edition (Latest)

MacAfee Virus Scan Enterprise Desktop Edition (Latest) - Per Year

Local Energy Monitoring Software - Professional edition

LAN cable (average one roll per S/S 300 Meters) Cat-06

PVC conduit Pipe - 3/4" ISI Mark

Enclosure for LAN Switch

4G/5G Data enable SIM

Integration of station metering system with centrlized data system including all hardware and software required.

Cable 4 Core 2.5 Sq. mm Copper, Armored

SDH/MUX EQUIPMENT

Steel Cabinet with all internal wiring/terminations/MDF and arrangement for dual 48/50V Power supply input

SDH (STM-4 upgradable upto STM-16)/MUX base 19" equipment rack (incl. front cover, cable tray, common cards such as redundant CPU) with arrangement for dual input power supply.

OLTE - 4 Port STM-1 (155 Mbps) Card excluding SFPs

SFP module to support upto 50 km

SFP module to support upto 100 km

Optical Amplifier/Booster equipment

OFC Patch Cords - (Set of 12 Nos.)

Ethernet over SDH (STM-4 upgradable upto STM-16) transport card (with eight 10/100/1000BaseT interfaces)

Minimum 8 Port E1 interface card

Minimum 8 Port 4w E&M Interface card

Minimum 12 Port FXO interface card

Minimum 10 Port FXS interface card

Minimum 4 Port programmable data interface card

Integrated Teleprotection card (4 Commands each)

Engineering Order Wire Phone

Optical Fibre Cable for above OPGW communication

Air-conditioner

Split AC (capacity-2T) Max. Star rating

Ventillation system for 220kV GIS Hall

Miscellaneous items

Air Curtain for Control Room Building

Interactive Screen for Control Room Building

LT Switchboard

415V Main Switchboard (MSB)

415V ACDB

220V DCDB

48V DCDB

Batteries

Battery charger system

220V, 100Amps Float Cum Boost Charger

48V, 60Amps Float Cum Boost Charger

250kVA, 440V DG set alongwith AMF control panel

Fire Prevention & Extinguishing System

Fire Detection and Alarm System for 220 kV & 33 kV GIS hall, Control Room Building

ABC type 10 kgs.

CO2 Type Fire Extinguisher 4.5 kgs

6 Fire bucket with stand

Sand drum (half size) filled with sand

Illumination sytem

33kV GIS Room / Control Room / Store Room / Offices llumination (LED Type Lights)

Switchyard lighting (LED Type Lights) with mounting accessories

Solar light system for street light (LED Type Lights) with Pole and other mounting accessories

LED Lights for 220kV GIS, High Bay type 170 Watts

1.1kV Aromoured Power Cables (AL) and Aromoured Control Cables (Copper) alongwith multidiameter moulded cable sealing, Lugs, Glands and straight joints, etc.

Power cables Aluminium (XLPE)

3.5Cx300 Sq.mm

Power cable Aluminium (PVC)

3.5Cx70Sq.mm

3.5Cx35Sq.mm

4Cx16 Sq.mm

4Cx6 Sq.mm

Control cable Copper (PVC)

2Cx2.5Sq.mm

4Cx2.5Sq.mm

6Cx2.5Sq.mm

10Cx2.5Sq.mm

33kV Power Cable and accessories

33kV XLPE Copper Power Cables for connecting Transformer to 33kV GIS of size 1 X 630 sq.mm.

33KV Indoor termination suitable for 630 sq.mm. cable

33KV Outdoor termination suitable for 630 sq.mm. cable

33kV XLPE Copper Power Cable for Auxiliary Transformer of size 1 X 185 sq.mm.

33kV Indoor Termination suitable for 185 sq.mm. cable

33kV Outdoor Termination suitable for 185 sq.mm. cable

Grounding/Earthing system

40mm MS rod for earthmat

40mm MS 03 meter electrodes

40mm 3 meter deep driven pipe electrode (treated pit)

MS/GS Flats 75x12

MS/GS Flats 50x6

GS shield Wire

Steel structure

Lattice structure

Pipe structure

EOT Crane

EOT Crane for 220KV GIS Room

Support for Operation and Maintenance (O&M) of substation, Trouble shooting and familiarization of PTCUL staff with installed system for a period of Six (06) Months by deplyoing adequate number (Minimum 02) of qualified persons round the clock.

Description of Work / Item(s)

Amount

Construction of 220/33 KV GIS Substation Banbasa,Tanakpur

Part-A(Civil Work)

Construction of Substation and Development Work

Buildings

Construction of 220 KV GIS Control cum Relay Room and Cable Vault (Plinth area to be measured) Ground Floor (Minimum Ceiling height-4.50 M)

(i) Control cum Relay Room (Minimum Ceiling height-4.50 M)

(ii) Cable Vault (Minimum room height 2.40 M )

Construction of 220 KV GIS Hall and Cable Vault (Plinth area to be measured)

(i) 220 KV GIS Hall (Minimum Ceiling height-9.00 M)

(ii) Cable Vault (Minimum room height 2.40 M )

Construction of control room cum administrative building (Minimum Ceiling height-4.50 M)

Construction of 33 KV GIS Hall (Plinth area to be measured) Ground Floor (Minimum Ceiling height-4.50 M)

(i) 33 KV GIS Hall (Minimun Ceiling height- 4.50 M)

(ii) Cable Vault (Minimum Room height- 2.4M)

Construction of store shed (Plinth area to be measured) (Minimum Ceiling height-4.20 M)

Security Guard Room (Minimum Ceiling Height- 2.90 M)

Construction of Erector-hostel Building (D/S) (Minimum Ceiling Height- 3.20 M)

Landscaping of substation land, Plantation and lawn development around substation buildings including providing & installation of flower pots in substation builidngs, providing & fixing of sign boards in switch yard & substation buildings and flex boards as directed & approved by Engineer-in-charge.

Establishment of temporary PTCUL site cum transit office at site including all necessary arrangement as directed by Engineer incharge.

Part-B

Construction of foundation of following structures including excavation and back filling of earth, CC/RCC works, reinforcement , supply & Fixing foundation bolts & painting the foundation etc. complete along with P/F of solar lights as directed & approved by Engineer-in-charge complete in all respect.

145 KV Gantry Column foundation

CVT foundation

LA foundation

Foundations for Bus Duct support structure.

Foundations for BPI

Foundation for Lightening Mast

Plinth for 50 MVA 220/33KV Single Phase Transformers

Plinth for 630KVA Transformer

DG set plinth

Bushing foundations

Oil storage tank plinth

Burnt Oil Sump Pit Tank

Nitrogen Injection Fire Prevention cum Extinguishing System Foundation

RCC Cable trenches with trench covers (all Sections) including all type of crossing and all metallic work to support cables and trench covers including painting and proper numbering.

600 mm size trench with minimum depth 600 mm

1050 mm size trench with minimum depth 600 mm

600 mm size trench with minimum depth 1000 mm

1050 mm size trench with minimum depth 1000 mm

Buried cable Trenches for 33 KV XLPE Cable for Transformer LV to 33 KV GIS.

RCC Fire Protection Walls including paint.

Cement concrete roads including all type of crossings including supply and fixing of solar lights along the road side.

5.00 metre wide

3.80 metre wide

1.20 metre wide

Security (Chain link) Fencing 3.6 m high along with Gate.

Security (Chain link) Fencing 3.6 m high.

Gate (5.0M wide)

Storm water drainage including culverts & chambers.

AC junction box for Switchyard lighting

Switch yard turfing and antiweed treatment including leveling and dressing of area, PCC and gravels

Construction of tubewell with a minimum discharge capacity of 100 lpm (or decided by Engineer -incharge) with KSB make submersible pumping set with L&T make panel board. also including construction of pump house building, including connecting pipe lines, valves etc. complete with one spare pumping set and panel board and one no. chain pulley block 2.0 MT capacity INDEF make etc. with RCC overhead water storage tank 30 KL capacity with staging of 12.0 meter. (NOTE:- Overhead water storage tank to be constructed at a place suitable for supply water to all the buildings with gravity at appropriate pressure)

Constrution of ground water recharge pit of approved depth, installation of pipes for collecting storm runoff from roof of substation buildings & of substation land for rain harvesting process as per specifications of CPWD rain harvesting manual and as directed & approved by Engineer-in-charge.

Land development including necessary cutting /filling and construction of all retaining walls for complete switch yard area maintaining required terraces levels, approach road, culverts.

Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. (2.31)

Carriage of Earth by mechanical transport including loading, unloading and stacking up to 5.0 KM lead (DSR No. 1.1.2)

Filling with available fly ash and earth (excluding rock) in trenches or embankment in layers (each layer should not exceed 15 cm), with intermediate layer of compacted earth (soil density of 98%) after every four layers of compacted depth of fly ash, sides & top layer of filling shall be done with earth having total minimum compacted thickness 30 cm or as decided by Engineer-in-charge, including compacting each layer by rolling/ramming and watering, all complete as per drawing and direction of Engineer in charge. (D.S.R. No. 2.38)

Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.( DSR No. 2.25 (a))

Excavation work in foundation trenches or drains not exceeding 1.5 m in width or 10 sqm on plan including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50m. Ordinary Rock. (DSR No. 2.7.1)

Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50 m and lift upto 1.5 m, disposed earth to be levelled and neatly dressed.m, as directed by Engineer-in-charge. Ordinary Rock (DSR No. 2.9.1)

Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials. Ordinary Rock (DSR No. 2.26.2)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) (DSR No. 4.1.3)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1:4:8 ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) (DSR No. 4.1.8)

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level. 1:1.5:3 ( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size). (DSR No. 5.1.2)

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level. 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). (DSR No. 5.1.3)

Reinforced cement concrete work in walls ( any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up to floor five level excluding cost of centering, shuttering, finishing and reinforcement. 1:1.5:3 ( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size). (DSR No. 5.2.2)

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15 degree landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral staircases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement. 1:1.5:3 ( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) (DSR 5.3)

Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footing, bases of columns, etc. for mass concrete. (DSR No. 5.9.1)

Centering and shuttering including strutting, propping etc. and removal of form for : Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. (DSR No. 5.9.2)

Centering and shuttering including strutting, propping etc. and removal of form for : Suspended floors, roofs, landing, balconies and access platform(DSR 5.9.3)

Centering and shuttering including strutting, propping etc. and removal of form for : Columns, Pillars, Piers, Abutments, Posts and Struts. (DSR No. 5.9.6)

Centering and shuttering including strutting, propping etc. and removal of form for : Edges of slabs and breaks in floors and walls. Under 20 cm wide (DSR No. 5.9.16.1)

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Cold twisted bars (DSR No. 5.22.3)

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand) (DSR No. 7.1.1)

Coursed rubble masonry (second sort) with hard stone in foundation and plinth with : Cement mortar 1:6 (1 cement : 6 coarse sand) (DSR No. 7.6.1)

Dry Random rubble masonry (first sort) with hard stone in foundation and plinth (DSR No. 7.1.1 Based item)

Stone tile (polished) work for wall lining over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and cement slurry @ 3.3 kg/sqm including pointing in white cement complete.8mm thick Granite of any colour and shade. (DSR No. 8.9.1.2)

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works (DSR No. 10.25.2)

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.(i) Single socketed pipes. 110 mm diameter (DSR No. 12.41.2)

Supplying and stacking at site. 90 mm to 45 mm size stone aggregate. (DSR No. 16.3.1)

Supplying and stacking at site. 63 mm to 45 mm size stone aggregate. (DSR No. 16.3.2)

Laying spreading and compacting stone aggregate of specified sizes to WBM specifications including spreading in uniform thickness, hand picking , rolling with 3 wheeled road / vibratory roller 8-10 tonne in stages to proper grade and camber, applying and brooming requisite type of screening / binding material to fill up interstices of coarse aggregate watering and compacting to the required density. (DSR No. 16.4)

Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 300 mm dia. R.C.C. pipe (DSR No. 19.6.4)

Providing and laying Non Pressure NP-3 class (Medium duty) R.C.C. pipes including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete 450 mm dia RCC pipes.(DSR No. 19.35.1)

Providing and laying Non Pressure NP-3 class (Medium duty) R.C.C. pipes including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete 600 mm dia RCC pipes.(DSR No. 19.35.2)

Providing and laying Non Pressure NP-3 class (Medium duty) R.C.C. pipes including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete 1200 mm dia RCC pipes.(DSR No. 19.35.5)

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade- Area of slab over 0.50 sqm (DSR No. 8.2.2.2)

Engraving letters in hard stone (DSR No. 16.21)

Part-C

Construction of Residences and Development Work

Residences

03 No. Type IV (G/F) residence (3x125=375.00)

04 No.Type III (G/F) residence (4x79=316.00)

04 No. Type III (F/F) residence (4x79=316.00)

08 No Type II (G/F) residence (8x57.70=461.60)

08 No. Type II (F/F) residence (8x 57.70=461.60)

Landscaping of residential area, Plantation and lawn development around residence buildings as directed & approved by Engineer-in-charge.

Part-D

Cement concrete roads including all type of crossings, parapet walls/railings, supplying & fixing of solar street lights along the road with foundation as directed & approved by Engineer-in-charge. Complete in all respect.

3.80 metre wide

1.20 metre wide

Security Fencing 1.5 m high along with Gate as directed & approved by Engineer-in-charge. Complete in all respect.

Security Fencing 1.5 m high

Gate (5.0 m wide)

Storm water drainage including culverts, chambers, etc. as directed & approved by Engieer-in-charge. Size of drain shall be decided by Engineer-in-charge. Complete in all respect.

Construction of Water supply mains including necessary pedestals for support as directed & approved by Engieer-in-charge. Complete in all respect.

Construction of Boundary Wall

Land development including necessary cutting /filling and construction of all retaining walls for complete area maintaining required terraces levels, approach road, culverts. as directed & approved by Engineer-in-charge.

Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. (2.31)

Carriage of Earth by mechanical transport including loading, unloading and stacking up to 5.0 KM lead (DSR No. 1.1.2)

Filling with available fly ash and earth (excluding rock) in trenches or embankment in layers (each layer should not exceed 15 cm), with intermediate layer of compacted earth (soil density of 98%) after every four layers of compacted depth of fly ash, sides & top layer of filling shall be done with earth having total minimum compacted thickness 30 cm or as decided by Engineer-in-charge, including compacting each layer by rolling/ramming and watering, all complete as per drawing and direction of Engineer in charge. (D.S.R. No. 2.38)

Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50 m and lift upto 1.5 m, disposed earth to be levelled and neatly dressed.m, as directed by Engineer-in-charge. Ordinary Rock (DSR No. 2.7.1)

Excavation work in foundation trenches or drains not exceeding 1.5 m in width or 10 sqm on plan including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50m. Ordinary Rock. (DSR No. 2.9.1)

Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials. Ordinary Rock (DSR No. 2.26.1)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) (DSR No. 4.1.3)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1:4:8 ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) (DSR No. 4.1.8)

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level. 1:1.5:3 ( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size). (DSR No. 5.1.2)

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level. 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). (DSR No. 5.1.3)

Reinforced cement concrete work in walls ( any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up to floor five level excluding cost of centering, shuttering, finishing and reinforcement. 1:1.5:3 ( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size). (DSR No. 5.2.2)

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15 degree landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral staircases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement. 1:1.5:3 ( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) (DSR 5.3)

Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footing, bases of columns, etc. for mass concrete. (DSR No. 5.9.1)

Centering and shuttering including strutting, propping etc. and removal of form for : Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. (DSR No. 5.9.2)

Centering and shuttering including strutting, propping etc. and removal of form for : Suspended floors, roofs, landing, balconies and access platform(DSR 5.9.3)

Centering and shuttering including strutting, propping etc. and removal of form for : Columns, Pillars, Piers, Abutments, Posts and Struts. (DSR No. 5.9.6)

Centering and shuttering including strutting, propping etc. and removal of form for : Edges of slabs and breaks in floors and walls. Under 20 cm wide (DSR No. 5.9.16.1)

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Cold twisted bars (DSR No. 5.22.3)

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand) (DSR No. 7.1.1)

Coursed rubble masonry (second sort) with hard stone in foundation and plinth with : Cement mortar 1:6 (1 cement : 6 coarse sand) (DSR No. 7.6.1)

Dry Random rubble masonry (first sort) with hard stone in foundation and plinth (DSR No. 7.1.1 Based item)

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works (DSR No. 10.25.2)

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.(i) Single socketed pipes. 110 mm diameter (DSR No. 12.41.2)

Supplying and stacking at site. 90 mm to 45 mm size stone aggregate. (DSR No. 16.3.1)

Supplying and stacking at site. 63 mm to 45 mm size stone aggregate. (DSR No. 16.3.2)

Laying spreading and compacting stone aggregate of specified sizes to WBM specifications including spreading in uniform thickness, hand picking , rolling with 3 wheeled road / vibratory roller 8-10 tonne in stages to proper grade and camber, applying and brooming requisite type of screening / binding material to fill up interstices of coarse aggregate watering and compacting to the required density. (DSR No. 16.4)

Providing and laying Non Pressure NP-3 class (Medium duty) R.C.C. pipes including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete 450 mm dia RCC pipes.(DSR No. 19.35.1)

Providing and laying Non Pressure NP-3 class (Medium duty) R.C.C. pipes including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete 600 mm dia RCC pipes.(DSR No. 19.35.2)

Lettering with black Japan paint of approved brand and manufacture (DSR No13.71)

Description of Work / Item(s)

Amount

Total Part-A (Supply) from BoQ1 sheet WITHOUT GST

Total Part-B (Erection) from BoQ2 sheet WITHOUT GST

Total Part-C (Civil) from BoQ3 sheet WITHOUT GST

Add GST* Amount on (Total of Part-A + Total of Part-B + Total of Part-C) above

Shyama Power India Limited (BID ID -339913)

JSP Projects Pvt Ltd (BID ID -341266)

JSP Projects Pvt Ltd (BID ID -341266)

Shyama Power India Limited (BID ID -339913)

JSP Projects Pvt Ltd (BID ID -341266)

Shyama Power India Limited (BID ID -339913)

JSP Projects Pvt Ltd (BID ID -341266)

Shyama Power India Limited (BID ID -339913)