Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹65.6 Craccepted-aoc | ₹65.6 Cr | accepted-aoc |
Tender Value
Refer Docs
EMD Value
₹63 L
Closing Date
25 May 2026, 9:30 pmClosed
Karnataka Industrial Areas Development Board
Technical Assistant-2
Formation of Roads including asphalting, construction of RCC Side Drains, Inspection Chambers, Spur Culverts, Valve Cistern, Rain Water Harvesting & Water Supply Works at Sector-1 of Gowribidnur 4th Phase in Jarabandanahalli Village, Gowribidnur Taluk, Chikkaballapura District.
KIADB/2026-27/OW/WORK_INDENT442
KIADB/2026-27/OW/WORK_INDENT442
Open
Other Works
Two Tender Document System(Two Cover)
KIADB Head Office Bangalore
3 documents required · 3 mandatory
To qualify for award of this contract, each Tenderer in its/his name should have in the last five years period (2021-22 to 2025-26). Satisfactory completed (at least 90% of the contract value), as a prime contractor, at least One Similar Work such as Formation of Industrial Layout, including Construction of Roads, RCC Side Drains, Inspection Chambers, Spur Culverts, Rain Water Harvesting & Water Supply Works, as per the scope work, of value not less than Rs.3150.00 lakhs.
Executed in any one financial year, the following minimum quantities of work: (Certificates of proof shall be enclosed from competent Authority not below the rank of Executive Engineer in Government/Public Sectors/Government Undertaking Organizations). (1) Earthwork Excavation/Earth work for Embankment/ Subgrade & Earthen Shoulders: 171896 Cum, (2) Granular Sub Base/ Wet Mix Macadam: 35045 Cum, (3) BM/DBM/BC/SDBC: 4709 Cum, (4) PCC/RCC: 8493 Cum, (5) TMT Steel Reinforcement: 510 Tonne
Each Tenderer should further demonstrate: Availability by owning at least 50% of the required / specified key and critical equipment for this work. The remaining 50% can be deployed on lease / hire basis for all works provided, the relevant documents (commitment agreements etc.,) for availability for this work are furnished : (Furnish details of plant / machinery / equipment etc.,)
Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under: Assessed available tender capacity: (AxNx1.5 - B), where, A: Maximum value of Civil Engineering works executed in any one year during the last five years (updated to 2026-27 price level) taking into account the completed as well as works in progress. N: Number of years prescribed for completion of the works for which tenders are invited. B: Value, at 2026-27 price level, of existing commitments and on-going works to be completed during the next 15 Months.
To qualify for award of this contract, each Tenderer in its/his name should have in the last five years period (2021-22 to 2025-26). Achieved in at least two financial years a minimum financial turnover of Rs.10080.00 Lakhs. (Civil Contract Works Only) (Not less than 2 times the amount put to tender)
Each Tenderer should further demonstrate: liquid assets and /or availability of credit facilities of not less than Rs.1512.00 lakhs (Credit lines/ letter of credit/ certificates from Public sector banks/Nationalized Banks (as per RBI guidelines) not less than 30% of the amount put to tender for meeting the fund requirement etc).
₹7,500
₹63 L
25 May 2026
8 May 2026
26 May 2026
14 May 2026
14 May 2026
Formation of Roads including asphalting, construction of RCC Side Drains, Inspection Chambers, Spur Culverts, Valve Cistern, Rain Water Harvesting & Water Supply Works at Sector-1 of Gowribidnur 4th Phase in Jarabandanahalli Village, Gowribidnur Taluk, Chikkaballapura District.
Roads: 30& 24m wide
Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and dispos...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Construction of Embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded with desired compaction. (Royalty shall be...
Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading...
Construction of sub-grade and earthen shoulders with approved material ( CBR min 10 %) obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to...
By Mix in Place Method Construction of Granular Sub-Base of required grading as per design spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with front en...
Providing laying spreading and compacting graded stone aggregate to Wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material ...
Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 kg per Sqm using mech...
Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.25 kg Sqm on Granular surface.With all lead & lift complete as per specification and ...
Dense Graded Bituminous Macadam Grading-II for traffice less than 20 MSA: Providing and laying Dense Graded Bituminous Macadam with 120 TPH capacity HMP batch type using crushed aggregates of specifie...
Bituminous Concrete Grading-II for traffice less than 20 MSA: Providing and laying Bituminous Concrete with 120 TPH capacity hot mix plant batch type using crushed aggregates of specified grading, pre...
Retro-Reflectorised Traffic Signs Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC:67:2022 made of Class C Type XI retro reflective sheeting fixed ove...
Direction and Place Identification Signs upto 0.9 m2 SizeBoard. Providing and erecting direction and place identification retroreflectorised sign as per IRC:67:2022 made of high intensity grade sheeti...
KSRRB M800-13.Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface Providing and laying of hot applied Thermoplastic compound 2.5 mm thick includi...
Supplying and Fixing of Molded Shank Raised Pavement Markers / Cat's Eye made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total internal ...
Earth work excavation for Foundation depth upto 3 m, as per drawing and technical out, shoring, strutting, barricading, excavated surfaces, disposing off or & stacking the selected earth for reuse m i...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Boundary Pillars/Guard Stone:- Reinforced cement concrete M15 grade boundary pillars of standard design as per IRC:25, fixed in position including finishing and lettering but excluding painting.With a...
Printing new letter and figures of any shade with synthetic enamel paint black or any other approved colour to give an even shade - English and Roman.With all lead & lift complete as per specification...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Supplying and fixing M15 grade precast cement concrete Kerb stones for Roadway, Sidewalls and gutters fixed with CM 1:3 fixed and finsihed in line as per direction of Engineer in charge. (The cost ...
Construction of Median and Island with Soil Taken from Borrow Areas Construction of median and Island above road level with approved material brought from borrow pits, spread, sloped and compacted as ...
Marking of Road Boundary, Plot Boundary and Outer Boundary of Industrial Layout using Total Station Equipment including mobilization of neceddary men and machinary complete as per the instruction of E...
RCC Side Drains
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barric...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with PVC Pipe 110mm outer dia at 2 kg per m2, extending through the full width of the structure with s...
Steel Fabrication Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/we...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Inspection Chamber
Providing S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class pipe of 600mm dia conforming to IS:458-1988 with latest amentment using ordinary portland cement, for sani...
Earth work excavation for Foundation depth upto 3 m, as per drawing and technical out, shoring, strutting, barricading,excavated surfaces, disposing off or & stacking the selected earth for reuse m in...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Steel Fabrication Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/we...
Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with PVC Pipe 110mm outer dia at 2 kg per m2, extending through the full width of the structure with s...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Spur Culvert (Junction)
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strut...
Earth work in surface excavation by mechanical means for lowering & levelingthe ground without blasting for all works other than foundation in Ordinary/Soft rock & depth not exceeding 300mm as per dra...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Steel Fabrication Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/we...
Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with PVC Pipe 110mm outer dia at 2 kg per m2, extending through the full width of the structure with s...
Providing and laying of Filter media with granular materials/stone crushed aggregates satisfying the requirements laiddown in clause 2504.2.2. of MoRTH specifications to a thicknessof not less than 60...
Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Construction of sub-grade and earthen shoulders with approved material ( CBR min 10 %) obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to...
Construction of Granular Sub-Base of required grading as per design spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with front end loader at OMC and com...
Providing laying spreading and compacting graded stone aggregate to Wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material ...
Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 kg per Sqm using mech...
Dense Graded Bituminous Macadam Grading-II for traffice less than 20 MSA: Providing and laying Dense Graded Bituminous Macadam with 120 TPH capacity HMP batch type using crushed aggregates of specifie...
Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.25 kg/m2 on Granular Surface.With all lead & lift complete as per specification and d...
Bituminous Concrete Grading-II for traffice less than 20 MSA: Providing and laying Bituminous Concrete with 120 TPH capacity hot mix plant batch type using crushed aggregates of specified grading, pre...
Retro-Reflectorised Traffic Signs Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC:67:2022 made of Class C Type XI retro reflective sheeting fixed ove...
Direction and Place Identification Signs upto 0.9 m2 SizeBoard. Providing and erecting direction and place identification retroreflectorised sign as per IRC:67:2022 made of high intensity grade sheeti...
Providing S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work sit...
Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 g/m2 area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC...
Supplying and Fixing of Molded Shank Raised Pavement Markers / Cat's Eye made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total internal ...
Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per dr...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Boundary Pillar/Guard Stone: Reinforced cement concrete M15 grade boundary pillars of standard design as per IRC:25, fixed in position including finishing and lettering but excluding painting.With all...
Printing new letter and figures of any shade with synthetic enamel paint black or any other approved colour to give an even shade - English and Roman.With all lead & lift complete as per specification...
Marking of Road Boundary, Plot Boundary and Outer Boundary of Industrial Layout using Total Station Equipment including mobilization of neceddary men and machinary complete as per the instruction of E...
RCC Side Drains & Inspection Chamber
Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar ...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with PVC Pipe 110mm outer dia at 2 kg per m2, extending through the full width of the structure with s...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Spur Culvert (Junction)
Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all k...
Earth work in surface excavation by mechanical means for lowering & levelingthe ground without blasting for all works other than foundation in Ordinary/Soft rock & depth not exceeding 300mm as per dra...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Steel Fabrication Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/we...
Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with PVC Pipe 110mm outer dia at 2 kg per m2, extending through the full width of the structure with s...
Providing and laying of Filter media with granular materials/stone crushed aggregates satisfying the requirements laiddown in clause 2504.2.2. of MoRTH specifications to a thicknessof not less than 60...
Dismantling of StructuresDismantling of existing structures like culverts, bridges, retainingwalls and other structure comprising of masonry, cement concrete,wood work, steel work, includ...
Earth work excavation for Foundationdepth upto 3 m, as per drawing and technicalout, shoring, strutting, barricading,excavated surfaces, disposing off or& stacking the selected earth for reusem includ...
Providing and laying in position Plain Cement Concrete for levelling course forall works in foundation. The granite/trap/basalt crushed graded coarseaggregates and fine aggregates as per relevant IS C...
Steel FabricationSupplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/wel...
Providing and laying in position Cement Concrete for all Foundation works.The granite/trap/basalt crushed graded coarse aggregates and fine aggregatesas per relevant IS Codes machine mixed with super ...
Providing and laying in position Cement Concrete for all Foundation works.The granite/trap/basalt crushed graded coarse aggregates and fine aggregatesas per relevant IS Codes machine mixed with super ...
Providing and laying in position Cement Concrete for all Foundation works.The granite/trap/basalt crushed graded coarse aggregates and fine aggregatesas per relevant IS Codes machine mixed with super ...
Providing weep holes in Brick masonry/Plain/ Reinforcedconcrete abutment, wing wall/ return wall with PVC Pipe 110mm outer dia at 2 kg per m2, extending through the fullwidth of the structure with slo...
Providing and laying of Filter media with granular materials/stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MoRTH specifications to a thicknessof not less than 6...
Providing and laying Cement concrete wearing coat M-30 grade including reinforcement complete as per drawing and Technical Specifications. (Batching Plant).With all lead & lift complete as per specifi...
Asphaltic Plug Joint Providing and laying of asphaltic plug joint to provide forhorizontal movement of 25 mm and vertical movement of 2 mm,depth of joint varying from 75 mm to 100 mm, width varyingfro...
Painting Two Coats on New Concrete Surfaces Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces.With all lead & lift complete as p...
Boundary Pillar/Guard Stone: Reinforced cement concrete M15 grade boundary pillars of standard design as per IRC:25, fixed in position including finishing and lettering but excluding painting.With all...
Back filling behind abutment, wing wall and return wall complete including compaction as per drawing and Technical Specification- A. Granular material.With all lead & lift complete as per specificatio...
Dismantling of StructuresDismantling of existing structures like culverts, bridges, retainingwalls and other structure comprising of masonry, cement concrete,wood work, steel work, includ...
Earth work excavation for Foundationdepth upto 3 m, as per drawing and technicalout, shoring, strutting, barricading,excavated surfaces, disposing off or& stacking the selected earth for reusem includ...
Providing and laying in position Plain Cement Concrete for levelling course forall works in foundation. The granite/trap/basalt crushed graded coarseaggregates and fine aggregates as per relevant IS C...
Steel FabricationSupplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/wel...
Providing and laying in position Cement Concrete for all Foundation works.The granite/trap/basalt crushed graded coarse aggregates and fine aggregatesas per relevant IS Codes machine mixed with super ...
Providing and laying in position Cement Concrete for all Foundation works.The granite/trap/basalt crushed graded coarse aggregates and fine aggregatesas per relevant IS Codes machine mixed with super ...
Providing and laying in position Cement Concrete for all Foundation works.The granite/trap/basalt crushed graded coarse aggregates and fine aggregatesas per relevant IS Codes machine mixed with super ...
Providing weep holes in Brick masonry/Plain/ Reinforcedconcrete abutment, wing wall/ return wall with PVC Pipe 110mm outer dia at 2 kg per m2, extending through the fullwidth of the structure with slo...
Providing and laying of Filter media with granular materials/stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MoRTH specifications to a thicknessof not less than 6...
Providing and laying Cement concrete wearing coat M-30 grade including reinforcement complete as per drawing and Technical Specifications. (Batching Plant) .With all lead & lift complete as per specif...
Asphaltic Plug Joint Providing and laying of asphaltic plug joint to provide forhorizontal movement of 25 mm and vertical movement of 2 mm,depth of joint varying from 75 mm to 100 mm, width varyingfro...
Painting Two Coats on New Concrete Surfaces Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces .With all lead & lift complete as ...
Boundary pillar/Guard Stone: Reinforced cement concrete M15 grade boundary pillars of standard design as per IRC:25, fixed in position including finishing and lettering but excluding painting .With al...
Back filling behind abutment, wing wall and return wall complete including compaction as per drawing and Technical Specification- A. Granular material .With all lead & lift complete as per specificati...
Dismantling of StructuresDismantling of existing structures like culverts, bridges, retainingwalls and other structure comprising of masonry, cement concrete,wood work, steel work, includ...
Earth work excavation for Foundationdepth upto 3 m, as per drawing and technicalout, shoring, strutting, barricading,excavated surfaces, disposing off or& stacking the selected earth for reusem includ...
Providing and laying in position Plain Cement Concrete for levelling course forall works in foundation. The granite/trap/basalt crushed graded coarseaggregates and fine aggregates as per relevant IS C...
Steel FabricationSupplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/wel...
Providing and laying in position Cement Concrete for all Foundation works.The granite/trap/basalt crushed graded coarse aggregates and fine aggregatesas per relevant IS Codes machine mixed with super ...
Providing and laying in position Cement Concrete for all Foundation works.The granite/trap/basalt crushed graded coarse aggregates and fine aggregatesas per relevant IS Codes machine mixed with super ...
Providing and laying in position Cement Concrete for all Foundation works.The granite/trap/basalt crushed graded coarse aggregates and fine aggregatesas per relevant IS Codes machine mixed with super ...
Providing weep holes in Brick masonry/Plain/ Reinforcedconcrete abutment, wing wall/ return wall with PVC Pipe 110mm outer dia at 2 kg per m2, extending through the fullwidth of the structure with slo...
Providing and laying of Filter media with granular materials/stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MoRTH specifications to a thicknessof not less than 6...
Providing and laying Cement concrete wearing coat M-30 grade including reinforcement complete as per drawing and Technical Specifications. (Batching Plant) .With all lead & lift complete as per specif...
Asphaltic Plug Joint Providing and laying of asphaltic plug joint to provide forhorizontal movement of 25 mm and vertical movement of 2 mm,depth of joint varying from 75 mm to 100 mm, width varyingfro...
Painting Two Coats on New Concrete Surfaces Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces .With all lead & lift complete as ...
Boundary pillar/Guard Stone: Reinforced cement concrete M15 grade boundary pillars of standard design as per IRC:25, fixed in position including finishing and lettering but excluding painting .With al...
Back filling behind abutment, wing wall and return wall complete including compaction as per drawing and Technical Specification- A. Granular material .With all lead & lift complete as per specificati...
Dismantling of StructuresDismantling of existing structures like culverts, bridges, retainingwalls and other structure comprising of masonry, cement concrete,wood work, steel work, includ...
Earth work excavation for Foundationdepth upto 3 m, as per drawing and technicalout, shoring, strutting, barricading,excavated surfaces, disposing off or& stacking the selected earth for reusem includ...
Providing and laying in position Plain Cement Concrete for levelling course forall works in foundation. The granite/trap/basalt crushed graded coarseaggregates and fine aggregates as per relevant IS C...
Steel FabricationSupplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/wel...
Providing and laying in position Cement Concrete for all Foundation works.The granite/trap/basalt crushed graded coarse aggregates and fine aggregatesas per relevant IS Codes machine mixed with super ...
Providing and laying in position Cement Concrete for all Foundation works.The granite/trap/basalt crushed graded coarse aggregates and fine aggregatesas per relevant IS Codes machine mixed with super ...
Providing and laying in position Cement Concrete for all Foundation works.The granite/trap/basalt crushed graded coarse aggregates and fine aggregatesas per relevant IS Codes machine mixed with super ...
Providing weep holes in Brick masonry/Plain/ Reinforcedconcrete abutment, wing wall/ return wall with PVC Pipe 110mm outer dia at 2 kg per m2, extending through the fullwidth of the structure with slo...
Providing and laying of Filter media with granular materials/stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MoRTH specifications to a thicknessof not less than 6...
Providing and laying Cement concrete wearing coat M-30 grade including reinforcement complete as per drawing and Technical Specifications. (Batching Plant) .With all lead & lift complete as per specif...
Asphaltic Plug Joint Providing and laying of asphaltic plug joint to provide forhorizontal movement of 25 mm and vertical movement of 2 mm,depth of joint varying from 75 mm to 100 mm, width varyingfro...
Painting Two Coats on New Concrete Surfaces Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces .With all lead & lift complete as ...
Boundary pillar/Guard Stone: Reinforced cement concrete M15 grade boundary pillars of standard design as per IRC:25, fixed in position including finishing and lettering but excluding painting .With al...
Back filling behind abutment, wing wall and return wall complete including compaction as per drawing and Technical Specification- A. Granular material .With all lead & lift complete as per specificati...
Dual water supply
Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, str...
Earth work excavation for pipeline trenches by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricading, caution lights, bra...
Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and nloading at both destinations and r...
Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and nloading at both destinations and r...
Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and nloading at both destinations and r...
Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and nloading at both destinations and r...
Providing and fixing of Single/ Double chamber triple function tamper proof (Both the orifces to be housed in the single chamber) Air valves with Body and cover in Ductile cast iron of grade GGG 40/ 5...
Providing and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of Ductile Iron (DI) conforming ti IS-1865 with the latest amendments and of grade GGG 40/50, shaft...
Providing and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of Ductile Iron (DI) conforming ti IS-1865 with the latest amendments and of grade GGG 40/50, shaft...
Providing and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of Ductile Iron (DI) conforming ti IS-1865 with the latest amendments and of grade GGG 40/50, shaft...
Providing and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of Ductile Iron (DI) conforming ti IS-1865 with the latest amendments and of grade GGG 40/50, shaft...
Providing & Fixing sluice valves/ Butterfly Valves (labour charges only) conforming to relevant ISS with latest amendments as detailed below for the following diameter and types with two Each of MJ co...
Providing & Fixing sluice valves/ Butterfly Valves (labour charges only) conforming to relevant ISS with latest amendments as detailed below for the following diameter and types with two Each of MJ co...
Providing & Fixing sluice valves/ Butterfly Valves (labour charges only) conforming to relevant ISS with latest amendments as detailed below for the following diameter and types with two Each of MJ co...
Providing & Fixing sluice valves/ Butterfly Valves (labour charges only) conforming to relevant ISS with latest amendments as detailed below for the following diameter and types with two Each of MJ co...
Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricadi...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Rain water Harvesting
Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm...
Earth work in surface excavation by mechanical means for lowering & levelingthe ground without blasting for all works other than foundation in Ordinary/Soft rock & depth not exceeding 300mm as per dra...
Earth work in surface excavation by mechanical means for lowering & levelingthe ground without blasting for all works other than foundation in Ordinary/Soft rock & depth not exceeding 300mm as per dra...
Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and te...
Earth work in surface excavation by mechanical means for lowering & levelingthe ground without blasting for all works other than foundation in Ordinary/Soft rock & depth not exceeding 300mm as per dra...
Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and te...
Earth work in surface excavation by mechanical means for lowering & levelingthe ground without blasting for all works other than foundation in Ordinary/Soft rock & depth not exceeding 300mm as per dra...
Providing to work spot rolling, lowering and placing in position RCC perforated rings in the already excavated pit including loading and unloading at both the destinations with all lead and lift with ...
Granular Aggregate-40mm down size .With all lead & lift complete as per specification and directions of Engineers in Charge of the work.
Stone Aggregate-20mm down size .With all lead & lift complete as per specification and directions of Engineers in Charge of the work.
Stone Aggregate-6mm down size .With all lead & lift complete as per specification and directions of Engineers in Charge of the work.
Labour charges for Mazdoor Heavy for Zone-IV 3cum per day per mason With all lead & lift complete as per specification and directions of Engineers in Charge of the work.
Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine agg...
Supplying, Fitting and Placing TMT Fe550 bar Reinforcement in sub-structure complete as per Drawing and Technical Specifications. .With all lead & lift complete as per specification and directions o...
Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, struttin...
Earth work excavation for pipeline trenches by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricading, caution lights, bra...
Earth work excavation for pipeline trenches by mechanical means as per drawing and technical specification, including setting out, construction of shoring, strutting, cost of blasting materials, barri...
Earth work excavation for pipeline trenches by mechanical means as per drawing and technical specification, including setting out, construction of shoring, strutting, cost of blasting materials, barri...
Manufacturing, providing, trasporting, rolling, lowering, laying, jointing and commissioning of ERW (Electric Resistance Welded)/ SAW (Submerged Arc Welded) MS pipes of Outer dia (Fe-410 grade) confor...
Manufacturing, providing, trasporting, rolling, lowering, laying, jointing and commissioning of ERW (Electric Resistance Welded)/ SAW (Submerged Arc Welded) MS pipes of Outer dia (Fe-410 grade) confor...
Manufacturing, providing, trasporting, rolling, lowering, laying, jointing and commissioning of ERW (Electric Resistance Welded)/ SAW (Submerged Arc Welded) MS pipes of Outer dia (Fe-410 grade) confor...
Providing coal taring two coats to the outer surface of M.S pipes as per AWWA specifications including the cost of coal tar etc.complete for: 406mm Dia
Providing coal taring two coats to the outer surface of M.S pipes as per AWWA specifications including the cost of coal tar etc.complete for: 356mm Dia
Providing coal taring two coats to the outer surface of M.S pipes as per AWWA specifications including the cost of coal tar etc.complete for: 324mm Dia
Providing and laying Ductile Iron pipes of class conforming to IS 8329:2000 with latest amendments, conveying to work site, rolling and lowering into trenches, laying true to line, level and perfect l...
Providing and laying Ductile Iron pipes of class conforming to IS 8329:2000 with latest amendments, conveying to work site, rolling and lowering into trenches, laying true to line, level and perfect l...
Providing and fixing of DI specials with ISI mark confoming to IS 9523 / 2000 suitable for jointing 100 mm to 600 mm dia DI pipes coated with rust prevention coatings as below: NOTE: A) External coati...
Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5...
Providing and filling murrum / gravely soil ( CNS soil ) above pipes including cost of all materials, labour, spreading soil in layers of 100 to 150 mm, breaking clods, watering, compaction by power ...
Sand bedding.With all lead & lift complete as per specification and directions of Engineers in Charge of the Work.
Air valve :Providing and laying in position Plain Cement Concrete for levelling course forall works in foundation. The granite/trap/basalt crushed graded coarseaggregates and fine aggregates as per re...
Providing and laying in position Cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Providing and fixing of Single/ Double chamber triple function tamper proof (Both the orifces to be housed in the single chamber) Air valves with Body and cover in Ductile cast iron of grade GGG 40/ 5...
Manufacturing, supplying, laying in position, aligning, jointing, testing and commissioning of electric resistance welded / submerged arc welded mild steel ( Fe-410 grade ) raising main pipe of specif...
Scour Valve: Providing and laying in position Plain Cement Concrete for levelling course forall works in foundation. The granite/trap/basalt crushed graded coarseaggregates and fine aggregates as per ...
Providing and laying in position Cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Providing and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of Ductile Iron (DI) conforming ti IS-1865 with the latest amendments and of grade GGG 40/50, shaft...
Providing and fixing MS ladder between landings, 45 cms wide using angle iron of specified sizes, 20mm MS bars at 25 cms. centre to centre, with necessary supports of same angle iron etc. as directed,...
Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...
Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...
Thrust Block: Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per rel...
Providing and laying in position Cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Butterfly Valve: Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per ...
Providing and laying in position Cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Providing and fixing of DI Double flanged wafer type (Concentric) / double eccentrically disc, Resilent seated Butterfly valves confoming to BS EN 593 / IS 13095 with shaft shall be of stainless steel...
Flow control Valve 5LPM/10LPM/15LPM : Providing, & fixing Flow control valve using food grade materials SS 316 ball /1/2" [15mm] including cost of all materials, labour charges, HOM and testing comple...
Structure Crossing: Earth work excavation for Foundation by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caut...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Pumping Machinery
Design, manufacturing, supply, errection, trail running, performance test and commissioning of centrifugal pump of approved make conforming to IS:12699 (1989) (Reaffirmed 2009) havin...
Supply and fixing of Cast steel ASTM A 216 Gr.WCB double flanged Dual plate check valve Conforming to API 594 with latest amendments Shaft material shall be SS420/431 and spring shall be spring steel ...
Manufacturing, supplying, laying in position, aligning, jointing, testing and commissioning of electric resistance welded / submerged arc welded mild steel ( Fe- 410 grade ) delivery pipes of specifie...
Manufacturing, supplying, laying in position, aligning, jointing, testing and commissioning of electric resistance welded /submerged arc welded mild steel (Fe-410 grade) manifold pipe system of specif...
Design, fabrication, supply, erection, testing and commissioning EOT crane consisting of double girder box type construction, rail mounted end carraiges with long and cross travel arrangement, main a...
Supplying Installing testing and commissioning electrode actuated water level transmitter of approved make with all accessories to protect against dry running of pump. With all lead and lifts complete...
Design, fabrication, supply, assembling, testing and commissioning of HT pump panel board made of sheet metal duly painted with recess for cable entries at bottom suitable for 6.6 KV equipped with vac...
Supply, installation and commissioning of Soft Starter for specified kW load operating at 6.6 KV with load break switch, metering, protection by-pass vaccum contactor with all accessories complete hou...
Supply and installation of floor mounting type LTAC panel of approved make fabricated from sheet metal and painted with provision for suitable incoming and specified number of outgoing feeder inlets w...
Supplying,Installing, assembling, wiring, comissioning of 1 set of Battery charger: 110 V, 15 A float and 30 A boost (with float and boost battery charger as per technical specification) with DC Dis...
Supplying of 1.1 KV Class Armoured Aluminium / copper conductor PVC insulated,extruded inner sheathed,galvanised,steel strip with glands/lugs/ferrules.For 4 core 10 sqmm.With all lead and lifts comple...
Supplying of 1.1 KV Class Armoured Aluminium / copper conductor PVC insulated,extruded inner sheathed,galvanised,steel strip with glands/lugs/ferrules.For 4 core 25 sqmm.With all lead and lifts comple...
Supplying of 1.1 KV Class Armoured Aluminium / copper conductor PVC insulated,extruded inner sheathed,galvanised,steel strip with glands/lugs/ferrules.For 4 core 95 sqmm.With all lead and lifts comple...
Supplying of 1.1 KV Class Armoured Aluminium / copper conductor PVC insulated,extruded inner sheathed,galvanised,steel strip with glands/lugs/ferrules.For 3.5 core 240 sqmm.With all lead and lifts com...
Supplying and drawing Copper control Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working ...
Supplying and drawing Copper control Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working ...
Supplying and drawing Copper control Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working ...
Supplying and drawing Copper control Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working ...
Supplying and drawing Copper control Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working ...
Supplying and drawing Copper control Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working ...
Supplying and drawing Copper control Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working ...
Supplying and Grounding of equipments including cost of 40mm dia 2.5 mm thick, class 'C' G.I pipe of 3 metre length as per specifications, with 50x6 mm GI Flats 3 meter long, salt charcoal, including ...
Supplying and Grounding of equipment with 50 x 6 mm G.I. Flat and connecting equipment to the earthmat/ground pit. Each point of earthing with all formation works like bending, twisting, drilling of h...
Supply, installation and commissioning of Load Break Switch with HRO fuses, CBCT and ELR in painted sheet metal enclosure with operating console complete for use along with Power Factor capacitor bank...
Supplying and installing Temperature scanner suitable for operating at 110 V DC or 230 V AC mounted in a duly painted sheet metal enclosure provided with NO / NC relays for transmitting signal to VCBs...
Supply and installation of Auxiliary transformer 6.6 KV / 433 Volts 160 KVA copper wound, insulating oil filled with all accessories complete as per specifications.With all lead and lifts complete as ...
Providing and fixing of Single/ Double chamber triple function tamper proof (Both the orifices to be housed in the single chamber) Air valves with Body and cover in Ductile cast iron of grade GGG 40/ ...
Supplying,Installing,assembling,wiring,comissioning of plante type Battery set of 110 V, 200 AH.With all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Providing and fixing of DI Double flanged wafer type (Concentric) / double eccentrically disc, Resilent seated Butterfly valves confoming to BS EN 593 / IS 13095 with shaft shall be of stainless steel...
Providing erecting and commissioning MS Dismantling joint as per requirement and department's approved drawing and specifications, including machining and rubber rings and suitable for 25 kg/cm2 worki...
Supply, installation and commissioning of High tension Power factor capacitor bank for motors operating at 6.6 KV of 200 KVAr rating with all accessories complete as per specifications terms and cond...
Supplying, laying and connecting xLPE 6.6 KV(E) 3 core cable suitable for 28 KA short circuit rating with end connecters from HT panel to motor, starters, capacitor panels etc., complete as per direct...
Supplying, laying and connecting xLPE 6.6 KV(E) 3 core cable suitable for 28 KA short circuit rating with end connecters from HT panel to motor, starters, capacitor panels etc., complete as per direct...
Supplying and fixing Butterfly valve actuator DOL panel board with push button starter and all other accessories including wiring for specified number of valves etc complete with all leads and lifts.W...
Supplying, installing, testing and commissioning of Dewatering Pump, including cost of all materials, machinery, labour, etc., complete with all leads and lifts.(15 HP).With all lead and lifts complet...
Replace the components of submersible pump sets, requiring replacements decided by the departmental officials, with respective make of damaged ones, including all materials, labour, equipments and tes...
Supply, installation and commissioning of High tension power factor capacitor bank for bus bar operating at 6.6 KV of 25 KVAr rating with all accessories complete as per specifications terms and condi...
Jackwell Cum Pump House:Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting,...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Earth work excavation for FOUNDATION by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, includin...
Earth work excavation for FOUNDATION by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, includin...
Earth work excavation for FOUNDATION by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, includin...
Earth work excavation for FOUNDATION by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, includin...
Excavation for foundation in hard rock of all toughness including boulders above 0.6 m diameter ( 0.113 m3 ) for dam, spillway, intake structure, surface power house and other appurtenant tructures b...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
Providing and laying in position Cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
Providing and laying in position Cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
Providing and laying in position Cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
Providing and laying in position Cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
Providing and laying in position Cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
Providing and laying in position Cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Providing Brick work with common burnt clay modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, sc...
Providing Cement mortar 1:3 (1 cement : 3 fine sand) including cost of all materials, labour and usage charges of machinery complete as per the direction of engineer incharge of work.With all lead & l...
Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever req...
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openi...
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Providing casing embankment using semi-pervious / pervious soil collected in embankment area in heaps as part of disposal of excavated soil from canal in layer of 250 to 300 mm (before compaction) inc...
Providing and constructing 450 mm thick size stone pitching with using 200 to 250mm size stones with pin headers at 2 per m2using stones and stone chips from approved source including cost of all mate...
Providing and fixing 1.8 m high GI barbed wire fencing with 2.4 m angle iron posts 50 mm x 50 mm x 6 mm placed every 3 m center to center founded in M15 grade cement concrete, 0.6 metre below ground l...
Filling clayey soil between two rows of sand bags placed for forming ring bund including cost of all materials, labour,tamping, plugging leakage points and all other ancillary operations complete.With...
Providing and placing sand bags consisting of empty cement bags filled with 35 to 40 kg locally available sand for forming ring bund including cost of all materials, labour, plugging joints with selec...
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on spec...
Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning ...
Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :New work (two coats) including a coat of approved steel primer but exclud...
Providing and laying reinforced cement concrete pipe NP3 for culverts including pointing ends, and fixing collars with cement mortar 1:2 including cost of all materials, labour, curing complete as p...
Supplying, fitting and fixing in position true to line and level elastomeric bearing conforming to IRC:83 (Part-II) section IX and clause 2005 of MoRTH specifications complete including all accessorie...
Fabricating, supplying and erecting Swaged tubular Pole of height ...m having three sections, and providing two coats of red oxide paint and finished with two coats of enamelled paint of approved qual...
Electrical Transmission Line:
11KV Express feeder line from Vemagal Sub station using 3 core x 400 sqmm XLPE UG Cable with all material, labour, civil works, suitable capacity, Electrical Inspectorate...
11/6.6 KV Sub-Station:
Double Pole Structure complete including 5 Kg, 8 SWG GI Wire for Structure Grounding
Lightning Arrestor:
9 kV, 5 kA Polymeric Type with Ground disconnector.
a) 11 kV, 400 Amps Double Break GOS.
b) H - Frame Set for fixing 11 kV, 200 Amps Single Break GOS - (For DP structure for providing New GOS for sectionalisation) - MS
11KV DOLO Cut Out as per IS-9385, Conventional to KEB Specification
Metering Cubicle equipment :
a) 11 kV HT Metering cubicle of different CT Ratio, Both side cable entry type with 3 CT & 3 PT, With Transparent Cover TTB, with 30x8 mm Copper Busbar, Modem & 2 No of Me...
11 kV, 3 Core, XPLE HTUG Cable with pressure extruded inner sheeth, ROUND WIRE ARMOURED as per IS-7098 (Part-2) Armouring wires dia and Resistivity as per IS-3975 :
a) 240 Sqmm, (55 GI Wires - 3.15 m...
b) 11 kV, Jointing & Cable Termination Kit
Heat Shrinkable outdoor Type Cable Termination Kit for XLPE Cable 3x240 Sqmm
c) Aluminium End Terminal (Lug) 240 Sqmm
Conventional RMU (VCB Type) with Copper Busbar, 350 MVA, 630 Amps as per IEC-62271/IS-3427 One Breaker (OD) Panel with Copper Busbar :
Grounding mat and equipment earthing at Receiving End side :
d) Grounding of equipments by providing cast iron pipe of 100 mm ID 13 mm thickness, 2.75 metres long with 2 part clamp out of G.I. Flat ...
Fire Fighting Equipments with necessary mounting Stands:
a) Foam type extinguisher 9.0 Litre Capacity
b) Carbon dioxide type 4.5 kg. capacity
c) Dry Chemical powder type 4.5 kg Capacity
i) G.I.Bucket 9 Ltr.capacity
ii) Steel stand
Station Yard chain fencing:
a) Providing and fixing RCC precast fencing pole of size 0.15mx0.15mx2.0m casted in M 20 with 20mm down size aggregates making holes for drawing barbed wire at 30 cm c/c us...
b) Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the dir...
Station Yard Lighting:
a)RCC Pole - 9 Mtr Long, 145 Kg WL
(Dwg No. BESCOM/GM/QS&S/02 Dtd 24.11.2018) as
b) Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for w...
c) Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded po...
Maintenance Tools and Plant:
i).Ring spanner set
ii).Pipe wrench 24 inches size
iii).Pipe wrench 18 inches size
iv).Double end spanner- 12 nos. per set
v).Hack saw frame B185
vi).Rubber hand gloves 15 kV tested
vii).Rechargeable 5 W LED Hand Torch
viii).Insulated cutting plier 12 inch size
ix).Insulated cutting plier 8 inch size
x).Line live tester AC/ DC 500 V
xi).screw driver 18 ''
xii).screw driver 12 ''
xiii).Hammer 8 lbs
xiv).Hammer 2 lbs
Distribution Transformer :Supply of 1.0 MVA Aluminium/Copper wound Distribution Transformer 33kV/0.433KV with Off Load Tap Switch, Buchholtz relay winding temperature indicator, Stacked CRGO core wi...
Labour charges:
Double Pole Structure complete including 5 Kg, 8 SWG GI Wire for Structure Grounding
Lightning Arrestor:
9 kV, 5 kA Polymeric Type with Ground disconnector.
a) 11 kV, 400 Amps Double Break GOS.
b) H - Frame Set for fixing 11 kV, 200 Amps Single Break GOS - (For DP structure for providing New GOS for sectionalisation) - MS
11KV DOLO Cut Out as per IS-9385, Conventional to KEB Specification
Metering Cubicle equipment :
a) 11 kV HT Metering cubicle of different CT Ratio, Both side cable entry type with 3 CT & 3 PT, With Transparent Cover TTB, with 30x8 mm Copper Busbar, Modem & 2 No of Me...
11 kV, 3 Core, XPLE HTUG Cable with pressure extruded inner sheeth, ROUND WIRE ARMOURED as per IS-7098 (Part-2) Armouring wires dia and Resistivity as per IS-3975 :
a) 240 Sqmm, (55 GI Wires - 3.15 m...
b) 11 kV, Jointing & Cable Termination Kit
Heat Shrinkable outdoor Type Cable Termination Kit for XLPE Cable 3x240 Sqmm
Conventional RMU (VCB Type) with Copper Busbar, 350 MVA, 630 Amps as per IEC-62271/IS-3427 One Breaker (OD) Panel with Copper Busbar :
a) Testing & Commissioning
For first 11 kV Panel Outdoor type/Kiosk
Erection of Transformers
Moving the Transformer to the plinth. Maximum allowable
distance is 50 metre (More than 50 metre, approval of D(T) has to be obtained)
Grounding mat and equipment earthing at Receiving End side
a) Supplying and laying of MS flats, of various sizes, welding and applying ACB paint to welded portion and covering with sodium bentonite c...
b) Providing 25mm dia M.S.rod 1.05 Mtr. Long earthmat spikes including heating, bending top 50mm over lap flattening and making spike edge at one end driving into the earth below the ground level and ...
c) Grounding of equipment with various sizes, G.I. Flat and connecting Equipment to the earthmat/ground pit. Each point of earthing with all formation works like bending, twisting, drilling of holes a...
c) Grounding of equipment with various sizes, G.I. Flat and connecting Equipment to the earthmat/ground pit. Each point of earthing with all formation works like bending, twisting, drilling of holes a...
e) Supplying & Providing 450 mm dia 450 mm height 1.5" to 2" thick hume pipe collar (non pressure type) for earth pits including all lead and lifts etc.,
Spreading of Jelly: Supplying and spreading 100mm thick with 20/25mm jelly with all lead and lifts.Note : Only 20/25 mm jelly shall be used.
Station Yard Lighting:
a)RCC Pole - 9 Mtr Long, 145 Kg WL
(Dwg No. BESCOM/GM/QS&S/02 Dtd 24.11.2018) as
d) Supplying and Fixing of 32mm dia class A GI pipe bracket up to 2 Mtrs long bent at suitable angle and fixing to this bracket 1x40/2x40 watts fluorescent tube street light fitting of all capacities ...
Construction of platform with size stone, cement concert for erection of Transformer/Metering cubicle/Heavy Equipment. Construction of platform (1.5x1.5x1.2) Mtr in size stone, for erection of transfo...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Sector 1.pdf
Tender Document • 1.66 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .