REPAIR/ REPLACEMENT TO JOINERY INCL REPAIR IN BUILT CUPBOARD, ROOF TREATMENT, ROOF SHEET, FALSE CEILING AND ALLIED WORKS IN ZONE C AND D UNDER GE CLEMENT TOWN

Amount

Taking down chowkhats or frames with shutters (without taking off shutter from the frame) of size n.exc 1.50 Sqm and removing from site complete all as specified and directed.

All as item No.1 above but exc 1.50 Sqm and n.exc 4.00 Sqm each.

Taking down shutters of any descriptionexc 1.00 Sqm and n.exc 2.00 Sqm each and removing from site complete all as specified and directed.

S&F IInd class hardwood plain solid straight chowkhat and frame wrought framed, rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

S&F Solid PVC double door frame of size 50x95mm made out of 5mm plain colour PVC sheet reinforced with MS tube complete all as specified and directed.

S&F MS work as in hold fast and similar small articles conforming to Fe-290, Gde E-165 complete all as specified and directed.

M&L for PCC (1:3:6) type C-1 (Using 20mm graded crushed stone aggregate) as in cills, copings, bed blocks for hold fasts and the like complete all as specified and directed.

S&F 35mm thick Flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

M&L 35 mm thick IInd class hardwood glazed and skeleton shutters with three panels, open rebated and prepared to receive glass gauge etc, edges of framing plain chamfered or rounded, fitted with cut and mitered beads for securing glass etc, size of members of shutter as specified in SSR (Part-I)- 2009 complete all as specified and directed.

S&F factory made solid PVC moulded with particle board door shutter ,28 to 30mm thick (stiles),with 2,4 or 6 panel design with 2mm thick moulded Prelam PVC sheet on the front face& 2mm thick prelam PVC sheet on back face complete all as specified and as directed.

S&F 30mm thick factory made solid wire gauged panel PVC moulded door shutter with 2 raised panel,panel will be of wire gaugze in lieu of both side prelam PVC sheet.The wire gauze shall be wrapped on an additional square 8mm MS solid tube & this tube shall be welded to MS tube & the wire gauge shall be stretched to tighten firmly complete all as specified and as directed.

S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm ivory colour PVC sheet reinforced with M.S. square tube, S&F in opening complete as per specification and drawing complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded ivory colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of ivory colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, and 5mm thick x 15mm wide PVC sheet beadings used inside stiles and rails and decorative PVC beading of 10mm x 10mm used instead of exposed portion of PVC sheet beading and suppling & fixing in the frame at site as per specification & drawing.

S&F Steel windows with side hung shutters with glazing bars, dovetailed or welded including projecting type hinges ,Z section hsndles, MS tower bolt 100mm 2Nos per leaf and GI hook and eye complete all as specified and directed.

All as per item No.14 above but without glazing bar complete all as specified and directed.

S&F steel ventilators with top hung shutters incl,hinges,steel peg stay,complete all as specified and as directed.

S/F 100 mm long mild steel butt hinges medium weight complete all as specified and directed.

S&F aluminum anodized barrel tower bolt 200mm long of extruded section complete all as specified and directed.

S&F aluminum anodized sliding door bolt 300mm long with hasp and staples (bolt type) and fixing clips of sheet cast of extruded section and fixing bolts and sliding bolts of extruded section complete all as specified and directed.

S&F aluminum bow handle "D" type anodized 150mm long complete all as specified and directed.

S & F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

All as per item No. 21 above but fixed in repair complete all as specified and directed.

S&F in repair Aluminum powder coated fixed type windows including suitable nylon beading channel gasket etc complete with following specification complete all as specified and directed :- Frame :- 60mmx40mmx1.80mm Panel :- 4mm thick ACP sheet / 5mm thick tinted/frosted glass of approved colour and design

S&F in repair aluminum anodized powder coated door shutter with frames of size - 40x45x1.8 mm incl. screwing of frame glass necessary joints cleats, glazing clips rubber packing, snap beading, suitable handle, tower bolt, SS butt hinges,mortice lock 4 lever with 65 mm latch size including aluminium anodized door frame of size 60x 40 x1.8 mm thick fixed to wall with necessary screws and plug complete all as specified & directed. (rates for one no hydraulic door closer per shutter & 5 mm thick tinted glass /4mm thick ACP sheet reqd to be fitted in shutters is included in the item )

S&F in repair aluminum anodized powder coated parttion fixed/sliding type with frames of size -side , top rail and intermidiate sections size 85x44.45x1.5 mm , incl. screwing of frame glass necessary joints cleats, glazing clips rubber packing, snap beading, fixed to wall with necessary screws and plug complete all as specified & directed. (rates for4.80 mm thick tinted glass / 4mm thick coloured aluminium composite panels reqd to be fitted in shutters is included in the item )

S&F in repair Powder coated aluminium moulded decorative grill for aluminium windows approved pattern complete all as specified and directed.

S & F 4mm thick coloured/wooden grain aluminium composite panel (approved by Engr-in-Charge) cladding to PVC rainwater pipe/RCC column etc. and including aluminium framing complete all as specified and directed.

S&F Floor door stopper 150mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor as complete all as specified and directed.

Hacking out old broken glass of any thickness, size, quality or description from metal frame including punching or drilling out old glazing pins/springs clips complete all as specified and directed.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc 0.5 Sqm each pane complete all as specified and directed.

S&F 5.5mm thick sheet glass ordinary quality and glazing with oil putty in square exc 0.5 Sqm each pane complete all as specified and directed.

S&F mild steel framed work as in door,chowkat,grills, gratings etc with ends of bars shouldered and riveted or forged into spikes, framed guard bars, barred iron doors etc, conforming to Fe-290, Gde-E-165 all as specified and directed.

S&F in repair MS helical door spring fixed in iron/wooden surface 300mm long including roller and roller plate complete all as specified and directed.

Repair to rolling shutter of any size and including greasing, oiling complete all as specified and directed.

Repairs to Aluminum door shutter / windows of any size including taking down and cleaning / repairing / replacement of all fittings and fixtures (If required) and re-fixing in the same opening complete all as specified and directed.

S&F for Stainless steel curtain rod, 25mm dia with fixing brackets and decorative type knobs both side of each rod ,incl taking down old curtain rod or pelmet boxes complete all as specified and directed. (Note :- Measurement will be taken between end point of knobs.)

Repair to steel window of any size by replacing worn out hinges or worn out portion such as glazing bars, fitting and fixture positioning of shutters etc. and cleaning the window surrounding and renewal of fitting and fixture (unserviceable) including greasing, oiling complete all as specified and directed.

S&F in repair Aluminium extruded section of Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

M&L double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box , main body with stainlesss , steel ocver, governing picot made of brass other parts made of mild steel heavy duty in repairs complete all as specified and directed.

Dismantling boarding any description, fixed in any position with nails complete all as specified and directed.

S&F for 18 mm thick , prelaminated medium density fibre (MDF) , interior grade, prelaminated one side with decorative choice lamination and other side balancing white with lamination fixed with screw to timber/ steel frame work as in CB shutter, shelves etc with PVC liping on all exposed edges on same texture and shade. Stainless steel cleat of suitable size will be use to fix the shelves of CB and cabinets complete all as specified and directed.

S & F 18 mm thick with min density 600 Kg / cum LEAD FREE PVC Celuka ply of single side rigid laminate of approved color and other side plain white colour fixed with ss screws and solvent cement/ adhesive to make kitchen cabinet shutters complete as per manufacturer’s instructions complete all as specified and directed Make: Raj Shree Plastic wood/ Sintex/ Archid plywood/ Kumar arch Tech Ltd

S&F 18mm Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame complete all as specified and directed.

S&F 0.90mm thick decorative laminates surface finish one side,colour and pattern as approved,fixed with approved adhesive as per manufacture instructions complete all as specfied and as directed.

S&F for hasp and staples,size 150mm, safety type, aluminium anodized with mild steel hinge pin including bolt to hinge plate and fixed with screws, fixed in repairs (ISI Marked) complete all as specified and directed.

S & F Auto closing hinges 35 mm of 0 crank ( KH-001) or 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters complete in all respect and fixed in position complete all as specified and directed.

S&F for Ball bearing runners 400 mm Telescopic (KA 5632) full extension load capacity 45 kgs complete all as specified and directed. Make:- Hettich/Harrison/Dorsel as approved by EIC/GE

S&F D-type cabinet handles premium quality, stainless steel 304/gloss chrome/SN finished 150mm long matt finished complete fixed in position complete all as specified and directed. Make:- Hettich/Harrison/Dorsel as approved by GE.

S&F Stainless Steel 304 grade wire Basket of pull out type like lain/cup &saucer /bottle/ multi purpose/2-3 shelf baskets etc for kitchens of required suze complete fixed in position complete all as specified and directed. Make:- Elnora /Godrej/Evershine as approved by GE.

S&F in repair 30mm width of flaps Continous (Piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and directed.

S&F in repair for 40mm dia cupboard knobs fixed with nut, screws and washer of wooden finish brass polished complete all as specified and directed.

S&F in repair magnet catcher to wooden frame work complete all as specified and directed.

Resecuring or easing and adjusting without taking down shutters of any description exc 1 sqm and n exc 2 sqm each complete all as specified and directed.

S & F ball bearing for rolling shutters complete all as specified and as directed.

S&F mild steel work in framing, purlin using section such as angle, hollow pipes , flats , etc using Fe-290 Grade E-165 complete all as specified and directed.

Dismantling AC (corrugated or semi corrugated) sheets/ galvalume sheet in roof covering including ridge of any description complete all as specified and directed.

S&F pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa and 150 AZ as in roof covering/cladding to wall, ridge , Gutter, Gable flashing, corner flashing etc, fixed with self tapping screws complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coated GI based corrugated steel sheet 0.50mm thick of any colour, having tensile strength of 550 Mpa and 150AZ as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Dismantling wall and ceiling boards including cover fillets of any descrition complete all as specified and directed.

S&F in repair PVC hollow section heavy grade designer wall panelling 5.5-6mm thick as approved by engr-in-charge fixed in position including all matching beading, angle for jambs, cills etc complete all as specified and directed.

S&F for anodised aluminium snap grid frame work for false ceiling (grid size 605 x 605mm) fixed to walls with rawl plugs and screws and hang to roof members with 6mm hanger bar of dia GI wire (upto 1200mm length) adjusting level fixed to roof slab by means of ceiling cleats made out of GI flat 40x3mm size 60mm long and expansion hold fastners 12.5mm dia 40mm long with and including 12mm thick perforated particle board of 60x60cm in size fixed or laid / inserted to Aluminium frame work complete all as specified and directed.

S&F For Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed.

M&L for 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over metal frame work and reinforced with G.I. wire mesh including metal frame work and GI wire mesh complete all as specified and as directed.

M&L for Gypsum board 12mm thick in ceiling fixed in with screw as per manufacture direction complete all as specified and directed.

S&F 4mm thick design `E' board of size 600x600mm incl aluminium snap grid made of aluminium main `T' 38x25x2mm thick and cross Tee and angle of section 24.5x24.5x1.4mm thick incl proper hanging arrangement (with 4mm dia galvanised iron wire and suitable adjuster) and incl applying two coat of OBD in repair complete all as specified and directed.

M&L 4mm thick non asbestos fibre cement building boards fixed or laid aluminium framework with screws for ceiling complete all as specified and directed.

S & F anodised aluminium snap grid frame work for false ceiling complete all as specified and directed.

M&L for preparation of new surfaces of wood and wood based materials of any descriptions not otherwise described over 10Cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

All as per item No.69 above but two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces complete all as specified and directed.

Demolition of brick work or stone masonry built in cement mortar including all quoins, arches, jambs etc complete all as specified and directed.

M&L brick work with sub class "B" old size bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and directed.

Taking down cement plaster of any description on brick work or stone masonry walls including rackingout joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L 15mm thick rendering in cement mortar (1:6) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L 15mm thick rendering in cement mortar (1:4) on fair faces of brick work or concrete surfaces, finished even and fair without using extra cement complete all as specified and directed.

M&L for two coats of oil bound distember over a coat of 3mm thick wall care putty to newly plastered surface including preparation of surfaces complete all as specified and directed.

M&L for two coats of cement based paint over a coat of cement wash to newly plastered surfaces of wall including preparation of surfaces, complete all as specified and directed.

Dismantling timber scantling 40 Sqcm and over in section in framed work complete all as specified and directed.

S&F IInd class hard wood as in scantling, clean sawn timber framed and fixed complete all as specified and directed.

M&L IInd class hard wood fillets, wrought, bull nosed, splayed chamfered or rounded on one edge, square, rectangular or triangular in section, sectional area exc 6 Sqcm but n.exc 13 Sqcm and fixed with nails as in cover fillets complete all as specified and directed.

S& F in repairs hasp and staple of 100mm size,safety type,brass with mild steel hinges pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

Removal of existing roof treatment i.e APP membrane, brick tiling including mud mortar and open up RCC roof slab including picking, sweeping cleaning with wire brush and washing down with water to remove dust, dirt to get surface free of laitance, scales, oil or any other loose material complete all as specified and directed. (Note:- The work is required to be carried out at non-accessible roof for double storey .The contractor shall make arrangement of scoffolding, safety & security of workers and arrangement for approach to roof . The rates quoted shall deemed to be included for these items)

M & L 50 mm thick PCC (1:2:4) type B-0 (using 12.5 mm graded crushed stone aggregate) mixed with liquid water proofing compound (as per manufacture direction and paid separately) over and including one coat of cement slurry admixed with acrylic bonding compound SBR Latex liquid polymer as to be used for bonding of new concrete / mortar to old surface as per manufacturer direction and finishing the surface even and fair (without using extra cement) as in roof padding to receive roof treatment complete all as specified and directed. (Note :- The work is required to be carried out at non-accessible roof for double storey . The contractor shall make arrangement of scoffolding,safety & security of workers and arrangement for approach to roof . The rates quoted shall deemed to be included for these items).

M & L of water proofing treatment to non-accessible roof slab with APP based modified polymeric membrane as per manufacturer’s instructions with following course of description below :- (a) Applying a priming coat of bituminious primer @ 0.30 Kg /Sqm, till the surface is properly impregnated. (b) Providing APP based 5 layer polymeric membrane minimum weighing 3.6Kg/ Sqm and minimum 3 mm thick reinforced with polyester non-woven fabric (weight not less than 150 gms/sqm) centre core, laid on primed surface by forced applications as per the manufacturer's instructions with side over lap of 75 mm and end overlap of 100 mm. All overlap joints shall be sealed thoroughly by thermo fusing both the membrane layer (torching overlap by propane or butane gas torch ) and sealing it with the help of hot trowel. The overlap joints shall be made as a monolithic layer. Note :- The quoted rate for Srl item No 82 above shall be deemed to be included the quoted rates for Srl item No 83. (c) Apply two coat of bituminous aluminium paint @ 0.20 Kg / Sqm each coat over APP membrance Note :- 1. The work of water proofing treatment shall be got executed through authorised applicator of the manufacturer only and 10 year company back warranty to be submitted by contractor 2. The work is required to be carried out at non-accessible roof slab for double storeyed. The contractor shall make arrangement of scaffolding, safety and security of workers and arrangement for approach to roof . The rates quoted shall deemed to be included for these items.)

NOTES :- 1. For the items for which specifications not mentioned any where in the tender, the BIS specifications shall be followed.

Nanda Brothers

M/S SURAT SINGH AND SONS

M/s Arihant Builders

M/s RK ENTERPRISES