Building

Earthwork in excavation for foundations as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH

Granular sub-base/base/surface course with local materials (9.5mm to 4.75mm @ 66% and 2.36mm below metal @ 34% )(Table 400.13) by mix in place method normal Construction of granular sub-base by providing local material spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel roller to achieve the desired density complete.But excluding VAT & Seignorage Charges

Plain Cement Concrete corresponding to M7.5 grade as per IS 456 equivalent to (1:4:8) proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 40mm size HBG (SS5) metal from from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including seigniorage charges, sales & other taxes on all materials, all operational, incidental and labour charges such as mixing, laying, curing concrete, etc., complete for finished item of work for Foundations and Flooring

Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement CC (1:2:4) mix, coarse and fine aggregates, maximum in a concrete mixer of not less than 0.2 cum capacity and appropeiate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle and plate vibrators and finished in continuous operation including provision of construction joints, primer, sealant as approved, curing of concrete slabs for 14- days, and water finishing to lines and grade as per drawing and Technical Specification

Brick masonry using Fly ash cement bricks of size 290x225x140 mm in CM(1:8) mix including cost and conveyance of all materials and labour charges etc,.complete per 1 cum

Plastering 12mm thick in two coats with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water, etc., to site, cost of seigniorage charges and all other taxes on all materials, and operational, incidental charges and all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves etc. as directed by Engineer-in-charge, complete for finished item of work (APSS No. 901 & 904) for walls

Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost of all materials, seigniorage charges, excluding conveyance charges of materials and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, complete for finished item of work i

Supply & fixing of Rolling shutter made of 80 x 1.25 mm machine rolled CRCA laths, interlocked together through their entire length and jointed together at the ends by endlocks,mounted on specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside & outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc complete for finished item of work as per special spn: 1108

Flooring with 25mm thick polished bethamcherla stone slabs set over base coat of CM (1:8) over already laid CC bed / RCC Roof Slab, including neat cement slurry of honey like consistency spread @ 3.3 kgs per sqm. & Jointed with neat cement to full depth including cost of all materials like cement, sand, and water and flooring stones etc., complete, including seigniorage charges, labour charges for dressing of flooring stones etc., complete for finished item of work, but excluding the cost of conveyance of all materials.

Painting, Priming for Iron Work(Ground Floor)

whitening of ceiling with two coats of emulsion primer paint paint of approved brand and shade over base coat of approved cement primer grade I making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including c/c of all materials, cost of brushes, water to site, etc., & other taxes, all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc.,complete for finished item of work in all floors for Internal & External Walls. Ground Floor (APSS No. 911) BLD-CSTN-10-5

Painting to new walls with synthetic polymer Luxury plastic emulsion paint having VOC ( Volatile organic paint content less than 50gms/lt of approved brand and shade over a base coat of appropriate primer of approved brand , making 3 coats in all to give an even shade after thouroughly brushing the surface to remove all dirt and remains of loose powdered materials , including cost and conveyance of all materials to work site and all operational , incidental , labour charges etc excluding seignorage charges for f9inished item of work . INTERNAL WALLS

Supply & fixing Asbestos Cement (AC) Corrugated Roofing Sheet, of approved quality and make, having 6 mm thickness, fixed with necessary J or L hooks, bolts, nuts, bitumen washers and GI plain washers, with or wothout ridge with sales & all other taxes & all labour charges etc. complete for fixing sheets in position.

supplying and laying Tar sheet of approved make, shade, and thickness over a properly cleaned and prepared base. The flooring shall be fixed using synthetic resin-based adhesive (Fevicol SR or equivalent) applied uniformly as per manufacturer’s instructions. Joints, edges, and corners shall be neatly trimmed and pressed to ensure a smooth, wrinkle-free finish. The rate includes cost Tar sheet, adhesive, labour charges for cutting, fixing, and finishing, as well as necessary tools and tackles required to complete the work in all respects.

Supplying and fixing of fitted with 5 mm thick Tinted glass of reputed make duly fixed with TPV Gaskets/ EPDM weathering seal resistant accessories like locking system 1 No., per set of sashes and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site with templates for casement sizing complete for finished item of work

Supply and fixing of Door shutter in Existing frame including fixing of 3 Nos. of 125 mm long SS Butt Hinges, 1 Nos of 150 mm long Alluminium Towe Bolt, 28-30mm thick flush shutter and 2 Nos. of 175mm long Stainless Steel Door Handles, 2 No of 250 mm long medium Stainless Steel Aldrop including cost and conveyance of all materials and labour charges etc., complete.