Construction of L027-Jhapuli To Bauna Motor Road Stage I and II with 5 Year Maintenance Under PBMC

HILL SIDE CUTTING Earth work in hill road (hill side cutting):- Excavation in hilly area for construction of road in all types of soil, rocks & E&B etc. As met at site , true to lines as per plan,L section , cross slope, super elevation as required , also including uprooting & cutting of bushes ,dressing of road surface to the required level and slopes, with all lift & leads required for safe disposal of surplus excavated material at suitable dumping places indicated in drawings by mechanical means/ manual means and including construction of required coolie walling of minimum height of 0.60 mt. with the stones available from the required hill side cutting for retaining the muck, without otherwise damaging the forest , forest land , utilities, private and public properties ,including slip clearance and its safe disposal (same as per mentioned above for safe disposal of surplus excated material), till the completion of the work as per part II special conditions of contract, MORD specifications Clause 1601,1602 & 1603,and as per direction of Engineer in charge and as per Special Condition for Constructin of Hill Road. Km 0.000 To 5.160

Construction of Embankment with Material Obtained from Roadway Cutting Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of Tables 300.1 and 300.2 as per Technical Specification Clause 301.5

Removal of Unsuitable Soil with Disposal upto 1000 m Removal of unsuitable soil including excavation, loading and disposal upto 1000 m lead but excluding compaction ground supporting embankment subgrade replacement by suitable soil, which shall be paid separately as per Clause 303.5.2 as per Technical Specification Clause 302.3.11 of MORD Specification for Rural Roads 2014

Construction For Super Elevation Construction of Subgrade and Earthen Shoulders Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1.

Excavation in foundation for Structure in all types of soils & rocks including all lead lift and disposal of surplus material as per direction of Engineer-in- charge, as per drawing and Technical Specifications Clause 305.1 of Mord specification for Rural Roads 2014

Construction of coolie walling including supply of all material, labour, T&P etc. required for proper completion of the work.(As per PWD Uttarakhand specifications)

PROTECTION WORK- Excavation in foundation for Structure in all types of soils & rocks including all lead lift and disposal of surplus material as per direction of Engineer-in- charge, as per drawing and Technical Specifications Clause 305.1 of Mord specification for Rural Roads 2014

Construction of R. R. Stone Masonary in Cement Mortor 1:5 including supply of all material labour T&P royalty etc required for proper completion of work as directed by Engineer in charge, as per drawing and Technical Specifications Clause 305.1 of Mord specification for Rural Roads 2014

Providing and Laying of Mechanically Woven Double Twisted Hexagonal shaped Gabions (Zinc plus PVC coated), of size 3mX1mX1m with two diaphragms at 1m interval, having mesh opening 100mmx120 mm, mesh wire diameter 2.7mm/3.7mm, edge/selvedge wire diameter 3.4/4.4 mm and lacing wire diameter 2.2/3.2 mm. (The work includes filling boulders in the gabions).

Construction of R. R. Stone Masonary laid in Dry including bond Stone, supply of all material, labour, T&P, royalties etc required for proper completion of work as directed by Engineer in charge, as per drawing and Technical Specifications of MORD Specification for Rural Roads 2014.

Hand Packed Stone filling in back of Structure including supply of all materials, labour, T&P and royalties etc required for proper completion of work as directed by Engineer in charge, as per drawing and Technical Specifications of MORD Specification for Rural Roads 2014.

Providing and fixing of CC Edge stone 12cmx12cmx60cm size precast in M15 cement concrete with 4 no 8mm dia HYSD vertical bars and 3 nos 6mm dia HYSD bars stirrups as per approved drawing including two coat white washing on valley side of formation as directed by engineer in charge and MORD specification for rural roads etc. Complet (0.120x0.120x0.600)m

Cement plum masonry with 40% plum & 60% 1:3:6 cement concrete including supply of all material, labour, T&P etc. required for proper completion of the work as directed by Engineer in charge, as per drawing and Technical Specifications Clauses 802, 803, 1202 & 1203 of MORD Specification for Rural Roads 2014.

Construction of Parapit as Standerd Drawing Attched Including supply of all material,labour and T&P etc. Complet (2.00x0.45x0.60) ( including PCC and Excavation)

Construction of Parapit as Standerd Drawing Attched Including supply of all material,labour and T&P etc. Complet (2.00x0.45x0.60) ( Excluding PCC and Excavation)

HILL SIDE PUCCA DRAIN- Excavation in foundation for Structure in all type of soil & rock including all lead lift and disposal of surplus material as directed by Engineer in charge and Technical Specifications of Mord specification for Rural Roads 2014

Construction of R. R. Stone Masonary in Cement Mortor 1:5 including supply of all material labour T&P royalty etc required for proper completion of work as directed by Engineer in charge, as per drawing and Technical Specifications Clause 305.1 of Mord specification for Rural Roads 2014

Plastering with cement mortar (1:4), 15 mm thick on brickwork in substructure as per technical specification Clauses 613.4 & 1204

HILL SIDE KATCHA DRAIN-Construction of unlined surface drains of average cross-sectional area up to 0.40 sqm in all type of soil,ordinary rock and Hard rock meet at site to specified lines, grades, levels and dimensions. Excavated material to be used in embankment with a lift upto 3m and lead of 50 m (average lead 25 m) as per Technical Specification Clause 307.

CROSS DRAIANAGE 1.00 M SPAN CULVERT-Excavation in foundation for Structure in all types of soils & rocks including all lead lift and disposal of surplus material as per direction of Engineer-in- charge, as per drawing and Technical Specifications Clause 305.1 of Mord specification for Rural Roads 2014

Providing and laying of Concrete for plain concrete in open foundation for structure including supply of all material, labour, T&P and royalty etc required for proper completion of work as directed by Engineer in charge, as per drawing and Technical Specifications Clauses 802, 803, 1202 & 1203 of MORD Specification for Rural Roads 2014. - PCC-M10

Providing and laying of Concrete for reinforced concrete for structure including supply of all material labour T&P. shuttering .Centering royalty etc required for proper completion of work as directed by Engineer - in - charge, as per drawings and Technical Specifications Clauses 800, 1205.4 and 1205.5 of Mord specification for Rural Roads 2014. - RCC grade M25

Providing and laying of Concrete for plain concrete in open foundation for structure including supply of all material, labour, T&P and royalty etc required for proper completion of work as directed by Engineer in charge, as per drawing and Technical Specifications Clauses 802, 803, 1202 & 1203 of MORD Specification for Rural Roads 2014. - PCC-M25

Construction of R. R. Stone Masonary in Cement Mortor 1:5 including supply of all material labour T&P royalty etc required for proper completion of work as directed by Engineer in charge, as per drawing and Technical Specifications Clause 305.1 of Mord specification for Rural Roads 2014

Construction of R. R. Stone Masonary laid in Dry including bond Stone, supply of all material, labour, T&P, royalties etc required for proper completion of work as directed by Engineer in charge, as per drawing and Technical Specifications of MORD Specification for Rural Roads 2014.

Hand Packed Stone filling in back of Structure including supply of all materials, labour, T&P and royalties etc required for proper completion of work as directed by Engineer in charge, as per drawing and Technical Specifications of MORD Specification for Rural Roads 2014.

Supplying, fitting, and placing HYSD bar reinforcement in superstructure complete as per drawing and Technical Specifications Clauses 1002, 1010 and 1202 of MORD Specification for Rural Roads 2014.

Providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as drawing and technical specification Clauses 614, 709, 1204.3.7

CROSS DRAIANAGE RCC CULVERT-Excavation in foundation for Structure in all types of soils & rocks including all lead lift and disposal of surplus material as per direction of Engineer-in- charge, as per drawing and Technical Specifications Clause 305.1 of Mord specification for Rural Roads 2014

Providing and laying of Concrete for plain concrete in open foundation for structure including supply of all material, labour, T&P and royalty etc required for proper completion of work as directed by Engineer in charge, as per drawing and Technical Specifications Clauses 802, 803, 1202 & 1203 of MORD Specification for Rural Roads 2014. - PCC-M10

Cement plum masonry with 40% plum & 60% 1:3:6 cement concrete including supply of all material, labour, T&P etc. required for proper completion of the work as directed by Engineer in charge, as per drawing and Technical Specifications Clauses 802, 803, 1202 & 1203 of MORD Specification for Rural Roads 2014.

Construction of R. R. Stone Masonary in Cement Mortor 1:5 including supply of all material labour T&P royalty etc required for proper completion of work as directed by Engineer in charge, as per drawing and Technical Specifications Clause 305.1 of Mord specification for Rural Roads 2014

Construction of R. R. Stone Masonary laid in Dry including bond Stone, supply of all material, labour, T&P, royalties etc required for proper completion of work as directed by Engineer in charge, as per drawing and Technical Specifications of MORD Specification for Rural Roads 2014.

Hand Packed Stone filling in back of Structure including supply of all materials, labour, T&P and royalties etc required for proper completion of work as directed by Engineer in charge, as per drawing and Technical Specifications of MORD Specification for Rural Roads 2014.

Providing concrete for plain/ reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 PCC M20 Nominal mix (1:2:4)

Providing and laying of Concrete for plain concrete in open foundation for structure including supply of all material, labour, T&P and royalty etc required for proper completion of work as directed by Engineer in charge, as per drawing and Technical Specifications Clauses 802, 803, 1202 & 1203 of MORD Specification for Rural Roads 2014. - PCC-M25

Supplying, fitting, and placing HYSD bar reinforcement in substructure complete as per drawing and Technical Specifications Clauses 1002, 1010 and 1202 of MORD Specification for Rural Roads 2014.

Providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as drawing and technical specification Clauses 614, 709, 1204.3.7

Drainage spouts complete as per drawing and technical specifications Clause 1209

CROSS DRAIANAGE CAUSEWAY-Excavation in foundation for Structure in all types of soils & rocks including all lead lift and disposal of surplus material as per direction of Engineer-in- charge, as per drawing and Technical Specifications Clause 305.1 of Mord specification for Rural Roads 2014

Construction of R. R. Stone Masonary laid in Dry including bond Stone, supply of all material, labour, T&P, royalties etc required for proper completion of work as directed by Engineer in charge, as per drawing and Technical Specifications of MORD Specification for Rural Roads 2014.

Providing and laying of Concrete for plain concrete in open foundation for structure including supply of all material, labour, T&P and royalty etc required for proper completion of work as directed by Engineer in charge, as per drawing and Technical Specifications Clauses 802, 803, 1202 & 1203 of MORD Specification for Rural Roads 2014. - PCC-M10

Cement plum masonry with 40% plum & 60% 1:3:6 cement concrete including supply of all material, labour, T&P etc. required for proper completion of the work as directed by Engineer in charge, as per drawing and Technical Specifications Clauses 802, 803, 1202 & 1203 of MORD Specification for Rural Roads 2014.

Plain/reinforced cement concrete in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 ans 1204 (For height upto 5 m) R.C.C. grade M 25

Supplying, fitting, and placing HYSD bar reinforcement in substructure complete as per drawing and Technical Specifications Clauses 1002, 1010 and 1202 of MORD Specification for Rural Roads 2014.

BASE AND SURFACING-Construction of subgrade and earthen shoulders with approved material obtained from borrow pits/hill side cutting with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1

Granular sub-base/base/surface course with local materials (Table 400.13) by mix in place method normal Construction of granular sub-base by providing local material spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel roller to achieve the desired density complete as per Clause 401.4 as per Technical Specification Clause 408. Using naturally occuring gravel

WBM Grading 2 Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to pro grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 2 as Technical Specification Clause 405.By Mechanical Means

WBM Grading 3 Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to pro grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as Technical Specification Clause 405. By By Mechanical Means

Prime Coat Low porosity Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per Technical Specification Clause 502

Tack Coat Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.20 to 0.25 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503.

20 mm thick Open Graded Premix Carpet using Bitumen Emulsion as per Technical Specification Clause 508.2

Seal Coat with Emulsion Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type B as per Technical Specification Clause 510

ROAD FURNITURE- Reinforced cement concrete M15 grade kilometre stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and Technical Specification Clause 1703 of MORD Specification for Rural Roads 2014. - Ordinary Kilometer Stone (Precast)

Reinforced cement concrete M15 grade kilometre stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and Technical Specification Clause 1703 of MORD Specification for Rural Roads 2014. - 200 m stone (precast)

Reinforced cement concrete M15 grade kilometre stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and Technical Specification Clause 1703 of MORD Specification for Rural Roads 2014 - 5th Kilometre Stone (precast)

Providing and FixingTital Information Board of PMGSY Project Providing and fixing of typical PMGSY informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1

Providing and fixing of corrosion resistant 2mm thick DG Grade Type XI retro- reflective cautionary, mandatory, informatory sign board with 10 year warranty as IRC:67 made of high intensity sheeting fixed over ACP (Aluminium Composite Panel) 3 mm thick (including framing and bracing with fabrication, plotting of letters on Electro cut film, pasting, riveting, taping and nut, bolts, washers and rivets etc for fixing), supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of proly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as approved drawing issued in original by retro-reflective sheeting manufacturer having oations in India by their indian subsidary. (Clause No. 801 of MORTH) 600 mm Equileteral and Triangle

Same as above - 600 mm Circular

Same as above - 800 X 600 mm Rectagular

Same as above - 600 X 450 mm Rectagular

Providing & fixing of PMGSY Logo Board at starting point, end point and at every 2 Km distance of road length as per attached standard drawing duly painted and written as per direction of Engineer-in-charge and Technical Specifications of MORD specification for Rural Roads 2014.

Providing & fixing of Citizen Information Board with PMGSY Logo at starting or prominent location (where maximum no. of citizens can view the detail of the road) as per attached standard drawing dully painted and written as per the MORD specification and direction of Engineer-in-charge.

Providing & fixing of Maintenance Board with PMGSY Logo at starting or prominent location as per attached standard drawing dully painted and written as per the MORD specification and direction of Engineer-in-charge.

Direction and Place Identification signs upto 0.9 sqm size board - Retro-reflectorised Traffic SignsProviding and erecting direction and place identification retro-reflectorised sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3, fixed over aluminium sheeting, 2 mm thick with area not exceeding 0.9 sqm supported on a mild steel single angle iron post 75 x 75 x 6 mm firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 450 x 450 x 600 mm, 600 mm below ground level as per approved drawing and Technical Specification Clause 1701 of MORD Specification for Rural Roads 2014.

Providing and laying of hot applied thermoplastic compound of ISI Mark Approved Quality of 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.

Type - A, "W" : Metal Beam Crash Barrier Providing and erecting a "W" metal beam crash barrier comprising of 3mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 centre to centre, 1.8 m high, 1.1 m below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5mm, 330 mm long complete as clause 810 ( if Concrete Required for Vertical post Fixing will be paid extra)

Excavation in foundation for Structure in all types of soils & rocks including all lead lift and disposal of surplus material as per direction of Engineer-in- charge, as per drawing and Technical Specifications Clause 305.1 of Mord specification for Rural Roads 2014

Providing and laying of Concrete for plain concrete in open foundation for structure including supply of all material, labour, T&P and royalty etc required for proper completion of work as directed by Engineer in charge, as per drawing and Technical Specifications Clauses 802, 803, 1202 & 1203 of MORD Specification for Rural Roads 2014. - PCC-M10

Environment Protection Works --Excavation in foundation for Structure in all types of soils & rocks including all lead lift and disposal of surplus material as per direction of Engineer-in- charge, as per drawing and Technical Specifications Clause 305.1 of Mord specification for Rural Roads 2014

Providing and Layinig of Wire Crates for Dumping MaterialProviding and laying of wire crates 3.00x1.50x1.50 in size with GI wire conforming to IS: 280 & IS:4826 in 150mm x 150mm mesh laid with stone boulders. as per direction of Engineer-incharge.

Maintainance Activities Under PBMC

1] Trimming of grass and weeds from the shoulders/berms and disposing off the same to suitable locations as per technical specifications Clause 1914. 2] Maintenance of road side Drains including minor slip clearence , reshaping ,deepening and ,regrading ,as well as catch water drains as per technical specification Clause 1907. 3]Maintenance of shoulders to the required level by filling/cutting the soil and its compacting including disposal of the surplus material in approved muck disposal points as per specification clause 1903 . 4] Maintenance of scuppers & Culverts by way of clearing, Cleaning, Erosion repair, repairs to cracks, parapet walls and Protection works as per drawing and technical specification Clasue 1908. 5] Maintenance of Causeway by way of minor Surface repairs, replacing Guide Posts, repair of flood gauges, removal of debris, providing boulders and protection work and painting as per technical specification Clause 1909. 6] Maintenance of road signs by way of cleaning and repainting of mandatory / requlatory / cautionary / informatory and place identifications sign board as per drawings and technical specification Clause 1910. 7] Maintenance of 200 metre km stone by way of refiting of tilted stones repairing with cement mortar, cleaning, repairing and lettering on 200 metre km stone and 5th km stone as per drawing and technical specification Clause 1912. 8} Repairing of pot holes by removal of loose material, trimming of sids, cleaning of surface and providing tack coat bitumen imulsion and patch repair with 20 mm thick premix carpeting and Type B seal coat using bitumen or catonic bitumen imulsion (in 3rd and 5th year). 9] Two coat white washing on parapet walls of CD work ,edge stones, tree truncks, and prominent rock patches on hill sides including preparation of surface by cleaning scraping etc. as per technical specifications Clause 191.

Ist year

IInd year

IIIrd year

IVth year

Vth year

Please Enable Macros to View BoQ information