MISC REPAIR/RECANNING AND POLISHING TO CERTAIN WOODEN FURNITURE UNDER GE MISAMARI

Amount

M&L Second Class Hardwood (seasoned Timber) REAR LEG of CHAIR DINING made to shape/size as shown on Drawing No. FD-12, FD-16, FD-203, FD-262 & FD-279 duly polished to match the existing chair including taking out unserviceable Rear Leg, complete all as specified and as directed.

All as per Item No. 1 here in before but for Front legs of CHAIR DINING complete all as specified and as directed..

All as per Item No. 1 here in before but for SIDE RAILof CHAIR DINING complete all as specified and as directed..

All as per Item No. 1 here in before but for FRONT or BACK RAIL of CHAIR DINING complete all as specified and as directed..

All as per Item No. 1 here in before but for BOTTOM STIFFENER of CHAIR DINING complete all as specified and as directed.

All as per Item No. 1 here in before but for BACK STIFFNER/REST of CHAIR DINING complete all as specified and as directed.

All as per Item No. 1 here in before but for BRACKET of size 75x75x25mm in triangular shape/size as shown and fixing with Steel Screws (2 No.) to CHAIR DINING complete all as specified and as directed.

S&F RUBBER/PVC SHOE superior quality (approved quality) fixing with suitable size Steel Plated Screws to Leg of CHAIR DINING as shown on Drawing No. FD-2, FD-16, FD-203, FD-262 & FD-279 including taking out unserviceable Shoe, complete all as specified and as directed.

M&L Re-canning to CHAIR DINING in Godrej pattern with Oval shape 2.0mm wide new White Plastic Cane and 3.0mm wide at the Edge (approved quality) as shown on Drawing No. FD-2,FD-16, FD-203, FD-262 & FD-279 including taking out old canning, complete all as specified and as directed.

M&L for scrapping of rough surface and old worn out polished layer with scrapper/sand paper for smoothing the surface of CHAIR DINING (Drawing No.FD-2, FD-16, FD-203, FD-262, FD-279) and applying Two Coats of French Polish (approved quality) to glossy finish complete all as specified and as directed.

M&L Second Class Hardwood (seasoned Timber) REAR LEG of CHAIR WRITING made to shape/size as shown on Drawing No. FD-20, FD-202, FD-250 & FD-280 duly polished to match the existing chair including taking out unserviceable Rear Leg, complete all as specified and as directed.

All as per Item No. 11 here in before but for FRONT LEG of CHAIR WRITING, complete all as specified and as directed.

All as per Item No.11 here in before but for SIDE RAIL of CHAIR WRITING , complete all as specified and as directed.

All as per Item No. 11 here in before but for FRONT or BACK RAIL of CHAIR WRITING, complete all as specified and as directed.

All as per Item No.11 here in before but for BOTTOM STIFFENER of CHAIR WRITING, complete all as specified and as directed.

All as per Item No.11 here in before but for BACK REST/STIFFENER of CHAIR WRITING , complete all as specified and as directed.

All as per Item No. 11 here in before but for BRACKET of size 75x75x25mm in triangular shape/size as shown on Drawing and fixing with Steel Screws (2 No.) to CHAIR WRITING , complete all as specified and as directed.

All as per Item No. 11 here in before but for ARMS REST of CHAIR WRITING , complete all as specified and as directed.

S&F RUBBER/PVC SHOE superior quality (approved quality) fixing with suitable size Steel Plated Screws to Leg for Leg of CHAIR WRITING , complete all as specified and as directed.

M&L Re-canning to CHAIR WRITING in Godrej pattern with Oval shape 2.0mm wide new White Plastic Cane and 3.0mm wide at the Edge (approved quality) as shown on Drawing No. FD-20, FD-202, FD-250 & FD-280 including taking out old/worn out Canning, complete all as specified and as directed.

M&L for scrapping of rough surface and old worn out polished layer with scrapper/sand paper for smoothing the surface of CHAIR WRITING (Drawing No. FD-20, FD-202, FD-250 & FD-280) and applying Two Coats of French Polish (approved quality) to glossy finish complete all as specified and as directed.

M&L Second Class Hardwood (seasoned Timber) REAR LEG of CHAIR DINING OFFICERS made to shape/size as shown on Drawing No. FD/MAP-II/04 duly polished to match the existing chair including taking out unserviceable Rear Leg, complete all as specified and as directed.

All as per Item No. 22 here in before but for Front legs of CHAIR DINING OFFICERS, complete all as specified and as directed.

All as per Item No. 22 here in before but for SIDE RAILof CHAIR DINING OFFICERS, complete all as specified and as directed.

All as per Item No. 22 here in before but for FRONT or REAR RAIL of CHAIR DINING OFFICERS, complete all as specified and as directed.

All as per Item No. 22 here in before but for BOTTOM STIFFENER of CHAIR DINING OFFICERS, complete all as specified and as directed.

All as per Item No. 22 here in before but for BACK REST/STIFFNER of CHAIR DINING OFFICERS, complete all as specified and as directed.

All as per Item No. 22 here in before but for BRACKET of size 75x75x25mm in triangular shape/size as shown and fixing with Steel Screws (2 No.) to CHAIR DINING OFFICERS, complete all as specified and as directed.

S&F RUBBER/PVC SHOE superior quality (approved quality) fixing with suitable size Steel Plated Screws to Leg of CHAIR DINING OFFICERS as shown on Drawing No. FD/MAP-II/04 including taking out unserviceable Shoe, complete all as specified and as directed.

S&F Seat made up of 12mm thick plywood, grade BWR and 75mm thick foam cushion upholstered with tapestry cloth cover of 650GSM with price not less than Rs350/sqm OF CHAIR DINING OFFICERS, complete all as specified and as directed.

M&L for scrapping of rough surface and old worn out polished layer with scrapper/sand paper for smoothing the surface of CHAIR DINING OFFICERS (Drawing No. FD/MAP-II/04) and applying Two Coats of French Polish (approved quality) to glossy finish complete all as specified and as directed.

M&L Second Class Hardwood (seasoned Timber) REAR LEG of CHAIR EASY made to shape/size as shown on Drawing No. FD-201 & FD-229 duly polished to match the existing chair including taking out unserviceable Rear Leg, complete all as specified and as directed.

All as per Item No. 32 here in before but for FRONT LEG of CHAIR EASY, complete all as specified and as directed.

All as per Item No. 32 here in before but for SIDE RAIL of Seat of CHAIR EASY, complete all as specified and as directed.

All as per Item No. 32 here in before but for FRONT or BACK RAIL of seat, complete all as specified and as directed.

All as per Item No. 32 here in before but for SIDE RAIL BACK of CHAIR EASY,complete all as specified and as directed.

All as per Item No. 32 here in before but for TOP or BOTTOM RAIL of Back of CHAIR EASY, complete all as specified and as directed.

All as per Item No.32 here in before but for FRONT SUPPORT RAIL of CHAIR EASY, complete all as specified and as directed.

S&F RUBBER/PVC SHOE superior quality (approved quality) fixing with suitable size Steel Plated Screws fixing to Leg of CHAIR EASY as shown on Drawing No. FD-201 & FD-229 including taking out unserviceable Shoe, complete all as specified and as directed.

M&L Re-canning to CHAIR Easy in Godrej pattern with Oval shape 2.0mm wide new White Plastic Cane and 3.0mm wide at the Edge (approved quality) as shown on Drawing No. FD-201 & FD-229 including taking out old/worn out Canning, complete all as specified and as directed.

M&L for scrapping of rough surface and old worn out polished layer with scrapper/sand paper for smoothing the surface of CHAIR EASY (Drawing No. FD-201, FD-229) and applying Two Coats of French Polish (approved quality) to glossy finish complete all as specified and as directed.

All as per Item No.32 here in before but for ARM REST of CHAIR EASY,complete all as specified and as directed.

S&F Plywood Top 12mm thick BWR grade, ISI marked confirming to IS-303 of MAKE : GREENPLY/ARCHIDPLY/ CENTURY in One Piece and fixed with suitable Screws to BED HARD/BED NEWAR as shown on Drawing No. FD-214, FD-245, FD-246 & FD-247 including taking out unserviceable Plywood Top, complete all as specified and as directed.

M&L Second Class Hardwood (seasoned Timber) LONG RAIL of BED HARD/BED NEWAR made to shape and size as shown on Drawing No. FD-214, FD-245, FD-246 & FD-247 duly polished with french polish including taking out unserviceable Long Rail, complete all as specified and as directed.

Making, Fixing of SHORT RAIL made out from Long Rail (retrieved from item No 44 here-in-above) of BED HARD/BED NEWAR made to shape/size and as shown on Drawing No. FD-214, FD-245, FD-246 & FD-247 including taking out unserviceable Short Rail, complete all as specified and as directed.

All as per Item No. 44 here in before but for MIDDLE STIFFNER of BED HARD/BED NEWAR, complete all as specified and as directed.

All as per Item No. 44 here in before but for Frame of HEAD BOARD of BED HARD/BED NEWAR, providing Plywood teak face both side 4.0mm thick, BWR grade, ISI marked, complete all as specified and as directed.

All as per Item No. 44 here in before but for Frame of FOOT BOARD of BED HARD/BED NEWAR, providing Plywood Teak Face both side 4.0mm thick, BWR grade, ISI marked, complete all as specified and as directed.

M&L Mild Steel Flat Iron 100x25mm Clamp for Corner to BED HARD/BED NEWAR, cut to size, bent to shape as shown on Drawing No. FD-214, FD-245, FD-246 & FD-247, applying Two coats of Synthetic Enemel Paint over a coat of Red Oxide Zinc Chrome Prime after preparation of surfaces including taking out unserviceable Clamp, complete all as specified and as directed.

M&L for scrapping of rough surface and old worn out polished layer with scrapper/sand paper for smoothing the surface of BED HARD/BED NEWAR (Drawing No. FD-214, FD-245, FD-246 & FD-247) and applying Two Coats of French Polish (approved quality) to glossy finish complete all as specified and as directed.

S&F TOP of SIDE BOARD made out of Prelaminated MDF Board 18/19mm thick, exterior grade ISI marked, providing Teak Wood Beading 5.0mm thick all round as shown on Drawing No. FD-26 & FD-241 including taking out unserviceable Top, complete all as specified and as directed.

S&F Second Class Hardwood (seasoned Timber) LEG of SIDE BOARD duly polished with french polish as shown on Drawing No. FD-26 & FD-241 including taking out unserviceable Leg, complete all as specified and as directed.

All as per Item No.52 here in before but for LONG RAIL of SIDE BOARD as shown on Drawing No. FD-26 & FD-241 including taking out unserviceable Long Rail, complete all as specified and as directed.

All as per Item No. 52 here in before but for SHORT RAIL of SIDE BOARD as shown on Drawing No. FD-26 & FD-241 including taking out unserviceable Short Rail, complete all as specified and as directed.

S&F SHUTTER of SIDE BOARD made out of Prelaminated MDF Board 18/19mm thick, exterior grade ISI marked, providing Second Class Hardwood 5.0mm thick all round as shown on Drawing No. FD-26 & FD-241 including taking out unserviceable Shutter, complete all as specified and as directed.

All as per Item No.52 here in before but for DRAWER of SIDE BOARD as shown on Drawing No. FD-26 & FD-241 including taking out unserviceable Drawer, complete all as specified and as directed.

All as per Item no. 52 here in before but for SIDE LT/RT of SIDE BOARD, complete all as specified and as directed.

S&F BACK of SIDE BOARD made out of Plywood 6.0mm thick commercial BWR grade as shown on Drawing No. FD-26 & FD-241 including taking out unserviceable Back, complete all as specified and as directed.

S&F CHROMIUM PLATED KNOB 40mm in size and fixing to Drawer of SIDE BOARD as shown on Drawing No. FD-26 & FD-241 including taking out unserviceable Knob, complete all as specified and as directed.

M&L for scrapping of rough surface and old worn out polished layer with scrapper/sand paper for smoothing the surface of of SIDE BOARD (Drawing No. FD-26 & FD-241) and applying Two Coats of French Polish (approved quality) to glossy finish complete all as specified and as directed.

S&F TOP of BIN SOILED LINEN made out of Prelaminated MDF Board 18/19mm thick, exterior grade ISI marked, providing Teak Wood Beading 5.0mm thick all round as shown on Drawing No. FD-244 including taking out unserviceable Top, complete all as specified and as directed.

S&F Second Class Hardwood (seasoned Timber) BOTTOM of BIN SOILED LINEN duly polished with french polish as shown on Drawing No. FD-244 including taking out unserviceable Bottom, complete all as specified and as directed.

S&F SIDE of BIN SOILED LINEN made out of Plywood 6.0mm thick, BWR grade as shown on Drawing No. FD-244 including taking out unserviceable Plywood Back, complete all as specified and as directed.

M&L Re-canning to SIDE LT/RT of BIN SOILED LINEN in Godrej pattern with Oval shape 2.0mm wide new White Plastic Cane and 3.0mm wide at the Edge (approved quality) as shown on Drawing No. FD-244 including taking out old canning, complete all as specified and as directed.

S&F Mild Steel Hinge 75mm in size, ISI marked and fixing to BIN SOILED LINEN as shown on Drawing No. FD-244 including taking out old unserviceable hinges, complete all as specified and as directed.

M&L for scrapping of rough surface and old worn out polished layer with scrapper/sand paper for smoothing the surface of BIN SOILED LINEN (Drawing No. FD-244) and applying Two Coats of French Polish (approved quality) to glossy finish complete all as specified and as directed.

S&F Second Class Hardwood (seasoned Timber) LEG of STOOL DRESSING as showduly polished with french polish as shown on Drawing No. FD-282 including taking out unserviceable Leg, complete all as specified and as directed.

All as per Item No. 67 here in before but for SIDE RAIL of STOOL DRESSING complete all as specified and as directed.

All as per Item No. 67 here in before but for STIFFENER of STOOL DRESSING complete all as specified and as directed.

M&L Re-canning to STOOL DRESSING in Godrej pattern with Oval shape 2.0mm wide new White Plastic Cane and 3.0mm wide at the Edge (approved quality) as shown on Drawing No. FD-282 including taking out old canning, complete all as specified and as directed.

M&L for scrapping of rough surface and old worn out polished layer with scrapper/sand paper for smoothing the surface of of STOOL DRESSING (Drawing No. FD-282) and applying Two Coats of French Polish (approved quality) to glossy finish complete all as specified and as directed.

S&F MIRROR 5.0mm thick of MAKE : MODI GUARD/ATUL of TABLE DRESSING LADIES as shown on Drawing No. FD-251& FD/MAP-II/07 including taking out unserviceable Mirror, complete all as specified and as directed.

S&F BACK of Plywood 6.0mm thick, BWR grade for Mirror of TABLE DRESSING LADIES as shown on Drawing No. FD-251& FD/MAP-II/07 including taking out unserviceable Plywood Back, complete all as specified and as directed.

S&F TOP of TABLE DRESSING LADIES made out of Prelaminated MDF Board 18/19mm thick, exterior grade ISI marked, providing Teak Wood Beading 5.0mm thick all round as shown on Drawing No. FD-251& FD/MAP-II/07 including taking out unserviceable Top, complete all as specified and as directed.

All as per Item no. 74 here in before but for BOTTOM of TABLE DRESSING LADIES, complete all as specified and as directed.

S&F Second Class Hardwood (seasoned Timber) DRAWER of TABLE DRESSING LADIES as shown on Drawing No. FD-251& FD/MAP-II/07 including taking out unserviceable Drawer, complete all as specified and as directed.

S&F CHROMIUM PLATED KNOB 40mm in size and fixing to Drawer of TABLE DRESSING LADIES as shown on Drawing No. FD-251& FD/MAP-II/07 including taking out unserviceable Knob, complete all as specified and as directed.

All as per Item no. 76 here in before but for LEG of TABLE DRESSING LADIES, complete all as specified and as directed.

S&F GLASS SLIDING SHUTTER of Plain Glass 4.0mm thick made out with Alluminium Channel 20mm width for TABLE DRESSING LADIES as shown on Drawing No. FD-251& FD/MAP-II/07 including taking out unserviceable Sliding Shutter, complete all as specified and as directed.

M&L for scrapping of rough surface and old worn out polished layer with scrapper/sand paper for smoothing the surface of TABLE DRESSING LADIES (Drawing No. FD-251& FD/MAP-II/07) and applying Two Coats of French Polish (approved quality) to glossy finish complete all as specified and as directed.

S&F MIRROR 5.0mm thick of MAKE : MODI GUARD/ATUL of TABLE DRESSING GENTS as shown on Drawing No. FD/E6/MAP/16 including taking out unserviceable Mirror, complete all as specified and as directed.

S&F BACK of Plywood 6.0mm thick, BWR grade for Mirror of TABLE DRESSING GENTS as shown on Drawing No. FD/E6/MAP/16 duly polished with french polish including taking out unserviceable Plywood Back, complete all as specified and as directed.

S&F TOP of TABLE DRESSING GENTS made out of Prelaminated MDF Board 18/19mm thick, exterior grade ISI marked, providing Teak Wood Beading 5.0mm thick all round as shown on Drawing No. FD/E6/MAP/16 including taking out unserviceable Top, complete all as specified and as directed.

All as per Item No. 83 here in before BOTTOM of TABLE DRESSING GENTS complete all as specified and as directed.

S&F 5mm thick glass shelves of TABLE DRESSING GENTS as shown on Drawing No. FD/E6/MAP/16 including taking out unserviceable Drawer, complete all as specified and as directed.

M&L for scrapping of rough surface and old worn out polished layer with scrapper/sand paper for smoothing the surface of TABLE DRESSING GENTS (Drawing No. FD/E6/MAP/16) and applying Two Coats of French Polish (approved quality) to glossy finish complete all as specified and as directed.

S&F TOP of BOOK CASE made out of Prelaminated MDF Board 18/19mm thick, exterior grade ISI marked, providing Teak Wood Beading 5.0mm thick all round as shown on Drawing No. FD-45, FD-45(M) & FD-237 including taking out unserviceable Top, complete all as specified and as directed.

S&F Second Class Hardwood (seasoned Timber) LEG of BOOK CASE duly polished with french polish as shown on Drawing No. FD-45, FD-45(M) & FD-237 including taking out unserviceable Leg, complete all as specified and as directed.

All as per Item No.88 here in before but for LONG RAIL of BOOK CASE, complete all as specified and as directed.

All as per Item No.88 here in before but for SHORT RAIL of BOOK CASE, complete all as specified and as directed .

S&F SHUTTER of BOOK CASE made out of Glass Pane 5.0mm thick as shown on Drawing No. FD-45, FD-45(M) & FD-237 including taking out unserviceable Shutter, complete all as specified and as directed.

S&F SHELVES of BOOK CASE made out of Prelaminated MDF Board 18/19mm thick, exterior grade ISI marked, providing Second Class Hardwood Beading 5.0mm thick all round as shown on Drawing No. FD-45, FD-45(M) & FD-237 including taking out unserviceable Shelves, complete all as specified and as directed.

All as per Item no. 92 here in before but for SIDE LT/RT of BOOK CASE, complete all as specified and as directed.

S&F BACK of BOOK CASE made out of Plywood 6.0mm thick, BWR grade as shown on Drawing No. FD-45, FD-45(M) & FD-237 including taking out unserviceable Plywood Back, complete all as specified and as directed.

M&L for scrapping of rough surface and old worn out polished layer with scrapper/sand paper for smoothing the surface of BOOK CASE (Drawing No. FD-45, FD-45(M) & FD-237) and applying Two Coats of French Polish (approved quality) to glossy finish complete all as specified and as directed.

S&F TOP of TABLE WRITING made out of Prelaminated MDF Board 18/19 mm thick, exterior grade ISI marked, providing Teak Wood Beading 5.0mm thick all round as shown on Drawing No. FD-275 & FD-33(M) including taking out unserviceable Top, complete all as specified and as directed.

S&F Second Class Hardwood (seasoned Timber) LEG of TABLE WRITING as shown on Drawing No. FD-275 & FD-33(M) duly polished with french polish including taking out unserviceable Leg, complete all as specified and as directed.

All as per Item No. 97 here in before but for LONG RAIL of TABLE WRITING, complete all as specified and as directed.

All as per Item No. 97 here in before but for SHORT RAIL of TABLE WRITING, complete all as specified and as directed.

All as per Item No. 97 here in before but for CENTRAL STIFFENER of TABLE WRITING, complete all as specified and as directed.

All as per Item No. 97 here in before but for DRAWER of TABLE WRITING, complete all as specified and as directed.

S&F STORE BOX (BACK) of 6.0mm thick (BWR) commercial ply for TABLE WRITING all as shown on Drawing No. FD-275 & FD-33(M) including taking out unserviceable Store Box (Back), complete all as specified and as directed.

S&F STORE BOX (SIDE) of Prelaminated MDF Board, exterior grade, ISI Marked for TABLE WRITING as shown on Drawing No. FD-275 & FD-33(M) including taking out unserviceable Store Box (Side), complete all as specified and as directed.

All as per Item No. 97 here in before but for SMALL LEG of TABLE WRITING, complete all as specified and as directed.

All as per Item No. 97 here in before but for SHUTTER of TABLE WRITING, complete all as specified and as directed.

M&L for scrapping of rough surface and old worn out polished layer with scrapper/sand paper for smoothing the surface of TABLE WRITING (Drawing No. FD-275 & FD-33(M) and applying Two Coats of French Polish (approved quality) complete all as specified and as directed.

S&F RUBBER/PVC SHOE superior quality (approved quality) fixing with suitable size Steel Plated Screws to Leg of TABLE WRITING as shown on Drawing No. FD-275 & FD-33(M) and fixing with Steel Screws (2 No.) including taking out unserviceable Shoe, complete all as specified and as directed.

S&F TOP of TEAPOY made out of Prelaminated MDF Board 18/19mm thick, exterior grade ISI marked, providing Teak Wood Beading 5.0mm thick all round as shown on Drawing No. FD-232 & FD-278 including taking out unserviceable Top, complete all as specified and as directed.

S&F Second Class Hardwood (seasoned Timber) LONG RAIL of TEAPOY as shown on Drawing No. FD-232 & FD-278 duly polished with french polish including taking out unserviceable Long Rail, complete all as specified and as directed.

All as per Item No.109 here in before but for SHORT RAIL of TEAPOY, complete all as specified and as directed.

All as per Item No. 109 here in before but for STIFFENER of TEAPOY, complete all as specified and as directed.

All as per Item No.109 here in before but for LEG of TEAPOY, complete all as specified and as directed.

S&F RUBBER/PVC SHOE superior quality (approved quality) fixing with suitable size Steel Plated Screws to Leg of TEAPOY as shown on Drawing No. FD-232 & FD-278 including taking out unserviceable Shoe, complete all as specified and as directed.

M&L preparing new and old Wooden Surfaces (after repaired) of TEAPOY (Drawing No. FD-232 & FD-278) and applying Two Coats of French Polish (approved quality) complete all as specified and as directed.

S&F TOP of TABLE CENTRE of Prelaminated MDF Board 18/19 mm thick, exterior grade ISI marked, providing Teak Wood Beading 5.0 mm thick all round as shown on Drawing No. FD-235 & FD-274 including taking out unserviceable Top, complete all as specified and as directed.

S&F Second Class Hardwood (seasoned Timber) LONG RAIL of TABLE CENTRE as shown on Drawing No. FD-235 & FD-274 duly polished with french polish including taking out unserviceable Long Rail, complete all as specified and as directed.

All as per Item No.116 here in before but for SHORT RAIL of TABLE CENTRE, complete all as specified and as directed..

All as per Item No. 116 here in before but for STIFFENER of TABLE CENTRE, complete all as specified and as directed.

All as per Item No.116 here in before but for LEG of TABLE CENTRE, complete all as specified and as directed.

S&F RUBBER/PVC SHOE superior quality (approved quality) fixing with suitable size Steel Plated Screws to Leg of TABLE CENTRE all as shown on Drawing No. FD-235 & FD-274 including taking out unserviceable Shoe, complete all as specified and as directed.

M&L for scrapping of rough surface and old worn out polished layer with scrapper/sand paper for smoothing the surface of TABLE CENTRE (Drawing No. FD-235 & FD-274) and applying Two Coats of French Polish (approved quality) to glossy finish complete all as specified and as directed.

S&F TOP of PEG TABLE made out of Prelaminated MDF Board 18/19mm thick, exterior grade ISI marked, providing Teak Wood Beading 5.0mm thick all round as shown on Drawing No. FD-236 & FD-277 including taking out unserviceable Top, complete all as specified and as directed.

S&F Second Class Hardwood (seasoned Timber) LONG RAIL of PEG TABLE as shown on Drawing No. FD-236 & FD-277 including taking out unserviceable Long Rail, complete all as specified and as directed.

All as per Item No.123 here in before but for SHORT RAIL of PEG TABLE, complete all as specified and as directed.

All as per Item No.135 here in before but for STIFFENER of PEG TABLE, complete all as specified and as directed.

All as per Item No.123 here in before but for LEG of PEG TABLE, complete all as specified and as directed.

S&F RUBBER/PVC SHOE superior quality (approved quality) fixing with suitable size Steel Plated Screws to Leg of PEG TABLE as shown on Drawing No. FD-236 & FD-277 including taking out unserviceable Shoe, complete all as specified and as directed.

M&L for scrapping of rough surface and old worn out polished layer with scrapper/sand paper for smoothing the surface of of PEG TABLE (Drawing No. FD-236 & FD-277) and applying Two Coats of French Polish (approved quality) to glossy finish complete all as specified and as directed.

S&F TOP of TABLE DINING 6 PERSONS made out of Prelaminated MDF Board 18/19mm thick, exterior grade ISI marked, providing Teak Wood Beading 5.0mm thick all round as shown on Drawing No. FD-273 & FD-329 including taking out unserviceable Top, complete all as specified and as directed.

S&F Second Class Hardwood (seasoned Timber) LONG RAIL of TABLE DINING 6 PERSONS duly polished with french polish as shown on Drawing No. FD-273 & FD-329 including taking out unserviceable Long Rail , complete all as specified and as directed.

All as per Item No. 130 here in before but for SHORT RAIL of TABLE DINING 6 PERSONS , complete all as specified and as directed.

All as per Item No. 130 here in before but for STIFFENER of TABLE DINING PERSONS , complete all as specified and as directed.

All as per Item No. 130 here in before but for LEG of TABLE DINING 6 PERSONS , complete all as specified and as directed.

S&F RUBBER/PVC SHOE superior quality (approved quality) fixing with suitable size Steel Plated Screws to Leg of TABLE DINING 6 PERSONS as shown on Drawing No. FD-273 & FD-329 including taking out unserviceable Shoe, complete all as specified and as directed.

M&L for scrapping of rough surface and old worn out polished layer with scrapper/sand paper for smoothing the surface of TABLE DINING 6 PERSONS (Drawing No. FD-273 & FD-329 and applying Two Coats of French Polish (approved quality) to glossy finish complete all as specified and as directed.

S&F TOP of TABLE DINING 8 PERSONS made out of Prelaminated MDF Board 18/19mm thick, exterior grade ISI marked, providing Teak Wood Beading 5.0mm thick all round as shown on Drawing No. FD-273 & FD-329 including taking out unserviceable Top, complete all as specified and as directed.

S&F Second Class Hardwood (seasoned Timber) LONG RAIL of TABLE DINING 8 PERSONS duly polished with french polish as shown on Drawing No. FD-273 & FD-329 including taking out unserviceable Long Rail, complete all as specified and as directed.

All as per Item No. 137 here in before but for SHORT RAIL of TABLE DINING 8 PERSONS, complete all as specified and as directed.

All as per Item No. 137 here in before for STIFFENER of TABLE DINING 8 PERSONS, complete all as specified and as directed .

All as per Item No. 137 here in before but for LEG of TABLE DINING 8 PERSONS, complete all as specified and as directed.

S&F RUBBER/PVC SHOE superior quality (approved quality) fixing with suitable size Steel Plated Screws to Leg of TABLE DINING 8 PERSONS as shown on Drawing No. FD-273 & FD-329 including taking out unserviceable Shoe, complete all as specified and as directed.

M&L for scrapping of rough surface and old worn out polished layer with scrapper/sand paper for smoothing the surface of TABLE DINING 8 PERSONS (Drawing No. FD-273 & FD-329) and applying Two Coats of French Polish (approved quality) to glossy finish complete all as specified and as directed.

S&F TOP of TABLE 3'x2' W/O DRAWER made out of Prelaminated MDF Board 18/19mm thick, exterior grade ISI marked, providing Teak Wood Beading 5.0mm thick all round as shown on Drawing No. FD-223, FD-231 & FD-284 including taking out unserviceable Top, complete all as specified and as directed.

S&F Second Class Hardwood (seasoned Timber) LONG RAIL of TABLE 3'x2' W/O DRAWER duly polished with french polish as shown on Drawing No. FD-223, FD-231 & FD-284 including taking out unserviceable Long Rail, complete all as specified and as directed.

All as per Item No. 144 here in before but for SHORT RAIL of TABLE 3'x2' W/O DRAWER, complete all as specified and as directed.

All as per Item No. 144 here in before but for STIFFENER of TABLE 3'x2' W/O DRAWER, complete all as specified and as directed.

All as per Item No. 144 here in before but for LEG of TABLE 3'x2' W/O DRAWER, complete all as specified and as directed.

S&F RUBBER/PVC SHOE superior quality (approved quality) fixing with suitable size Steel Plated Screws to Leg of TABLE 3'x2' W/O DRAWER as shown on Drawing No. FD-223, FD-231 & FD-284 including taking out unserviceable Shoe, complete all as specified and as directed.

M&L for scrapping of rough surface and old worn out polished layer with scrapper/sand paper for smoothing the surface of TABLE 3'x2' W/O DRAWER (Drawing No. FD-223, FD-231 & FD-284) and applying Two Coats of French Polish (approved quality) to glossy finish complete all as specified and as directed.

S&F TOP of TABLE 3'x2' WITH DRAWER made out of Prelaminated MDF Board 18/19mm thick, exterior grade ISI marked, providing Teak Wood Beading 5.0mm thick all round as shown on Drawing No. FD-223, FD-231,FD-283 &FD-284 including taking out unserviceable Top, complete all as specified and as directed.

S&F Second Class Hardwood (seasoned Timber) LONG RAIL of TABLE 3'x2' WITH DRAWER duly polished with french polish as shown on Drawing No. FD-223, FD-231,FD-283 &FD-284 including taking out unserviceable Long Rail, complete all as specified and as directed.

All as per Item No. 151 here in before but for SHORT RAIL of TABLE 3'x2' WITH DRAWER, complete all as specified and as directed.

All as per Item No.151 here in before but for STIFFENER of TABLE 3'x2' WITH DRAWER, complete all as specified and as directed.

All as per Item No. 151 here in before but for LEG of TABLE 3'x2' WITH DRAWER, complete all as specified and as directed.

S&F RUBBER/PVC SHOE superior quality (approved quality) fixing with suitable size Steel Plated Screws to Leg of TABLE 3'x2' W/O DRAWER as shown on Drawing No. FD-223, FD-231,FD-283 &FD-284 including taking out unserviceable Shoe, complete all as specified and as directed.

M&L for scrapping of rough surface and old worn out polished layer with scrapper/sand paper for smoothing the surface of TABLE 3'x2' WITH DRAWER (Drawing No. FD-223, FD-231,FD-283 &FD-284 and applying Two Coats of French Polish (approved quality) to glossy finish complete all as specified and as directed.

S&F DRAWER of 6.0mm thick BWR Ply for TABLE 3'x2' WITH DRAWER as shown on Drawing No. FD-223, FD-231,FD-283 &FD-284 including taking out unserviceable Drawer, complete all as specified and as directed.

S&F TOP of TABLE OFFICE CLERK WOODEN made out of Prelaminated MDF Board 18/19mm thick, exterior grade ISI marked, providing Teak Wood Beading 5.0mm thick all round as shown on Drawing No. WDF-32 including taking out unserviceable Top, complete all as specified and as directed.

S&F Second Class Hardwood (seasoned Timber) LONG RAIL of TABLE OFFICE CLERK WOODEN duly polished with french polish as shown on Drawing No. WDF-32 including taking out unserviceable Long Rail, complete all as specified and as directed.

All as per Item No. 159 here in before but for SHORT RAIL of TABLE OFFICE CLERK WOODEN, complete all as specified and as directed .

All as per Item No. 159 here in before but for STIFFENER of TABLE OFFICE CLERK WOODEN, complete all as specified and as directed .

All as per Item No.159 here in before but for LEG of TABLE OFFICE CLERK WOODEN, complete all as specified and as directed.

S&F RUBBER/PVC SHOE superior quality (approved quality) fixing with suitable size Steel Plated Screws to Leg of TABLE OFFICE CLERK WOODEN as shown on Drawing No. WDF-32 including taking out unserviceable Shoe, complete all as specified and as directed.

M&L for scrapping of rough surface and old worn out polished layer with scrapper/sand paper for smoothing the surface of TABLE OFFICE CLERK WOODEN (Drawing No. WDF-32) and applying Two Coats of French Polish (approved quality) to glossy finish complete all as specified and as directed.

S&F DRAWER of Plywood Board 6.0mm thick (BWR) commercial for TABLE OFFICE CLERK WOODEN (Drawing No. WDF-32) as shown on drawing including taking out unserviceable Drawer, complete all as specified and as directed.

S&F TOP of TABLE OFFICE OFFICER WOODEN made out of Prelaminated MDF Board 18/19mm thick, exterior grade ISI marked, providing Teak Wood Beading 5.0mm thick all round as shown on Drawing No. WDF-31 including taking out unserviceable Top, complete all as specified and as directed.

S&F Second Class Hardwood (seasoned Timber) LONG RAIL of TABLE OFFICE OFFICER WOODEN duly polished with french polish as shown on Drawing No. WDF-31 including taking out unserviceable Long Rail, complete all as specified and as directed.

All as per Item No.167 here in before but for SHORT RAIL of TABLE OFFICE OFFICER WOODEN, complete all as specified and as directed.

S&F RUBBER/PVC SHOE superior quality (approved quality) fixing with suitable size Steel Plated Screws to Leg of TABLE OFFICE OFFICER WOODEN as shown on Drawing No. WDF-31 including taking out unserviceable Shoe, complete all as specified and as directed.

M&L for scrapping of rough surface and old worn out polished layer with scrapper/sand paper for smoothing the surface of TABLE OFFICE OFFICER WOODEN (Drawing No. WDF-31) and applying Two Coats of French Polish (approved quality) to glossy finish complete all as specified and as directed.

S&F DRAWER of Plywood Board 6.0mm thick (BWR) commercial for TABLE OFFICE OFFICER WOODEN duly polished with french polish as shown on Drawing No. WDF-31 including taking out unserviceable Drawer, complete all as specified and as directed.

S&F TOP of TABLE BED SIDE made out of Prelaminated MDF Board 18/19mm thick, exterior grade ISI marked, providing Teak Wood Beading 5.0mm thick all round as shown on Drawing No. FD-236 & FD-276 including taking out unserviceable Top, complete all as specified and as directed.

All as per Item No.172 here in before but for SIDE (LT & RT) of TABLE BED SIDE, complete all as specified and as directed.

S&F BACK of Plywood 6.0mm thick, BWR grade for TABLE BED SIDE as shown on Drawing No. FD-236 & FD-276 including taking out unserviceable BACK, complete all as specified and as directed.

M&L for scrapping of rough surface and old worn out polished layer with scrapper/sand paper for smoothing the surface of TABLE BED SIDE (Drawing No. FD-248 & FD-276) and applying Two Coats of French Polish (approved quality) to glossy finish complete all as specified and as directed.

M&L Second Class Hardwood (seasoned Timber) REAR LEG of CHAIR WBB made to shape/size as shown on Drawing No. FD-225 & FD-284 duly polished to match the existing chair including taking out unserviceable Rear Leg, complete all as specified and as directed.

All as per Item No. 176 here in before but for FRONT LEG of CHAIR WBB, complete all as specified and as directed.

All as per Item No. 176 here in before but for SIDE RAIL of CHAIR WBB, complete all as specified and as directed.

M&L Plywood 6.0mm thick, commercial ISI marked, SEAT FRAME of CHAIR WBB made to shape/size as shown on Drawing No. FD-225 & FD-284 including taking out unserviceable Seat Frame, complete all as specified and as directed.

All as per Item No.176 here in before but for BOTTOM STIFFENER of CHAIR WBB, complete all as specified and as directed.

All as per Item No. 176 here in before but for BACK REST of CHAIR WBB, complete all as specified and as directed.

S&F RUBBER/PVC SHOE superior quality (approved quality) fixing with suitable size Steel Plated Screws to Leg of CHAIR WBB as shown on Drawing No. FD-225 & FD-284 including taking out unserviceable Shoe, complete all as specified and as directed.

M&L for scrapping of rough surface and old worn out polished layer with scrapper/sand paper for smoothing the surface of CHAIR WBB (Drawing No. FD-225 & FD-284) and applying Two Coats of French Polish (approved quality) complete all as specified and as directed.

M&L Second Class Hardwood (seasoned Timber) FRONT/REAR LEG of SOFA SET 4 SEATER, made to shape/size as shown on Drawing No. FD-281/FD/MAP-II/02 duly polished with french polish including taking out old Front/Rear Leg, complete all as specified and as directed.

All as per Item no.184 here in before but for SIDE/BACK/FRONT RAIL of SOFA SET 4 SEATER,complete all as specified and as directed.

All as per Item no.184 here in before but for BATTEN for SEAT/ BACK of SOFA SET 4 SEATER, complete all as specified and as directed.

ll as per Item no.184 here in before but for ARM of SOFA SET 4 SEATER, complete all as specified and as directed.

M&L FOAM CUSHION SEAT and BACK. 100mm thick 40 density MAKE : KURLON/SLEEPWELL covered with Tapestry Cloth superior quality duly stitched with fine standard thread and providing best quality Chain with Runner on One Side as approvd by GE, suitable for SEAT of SOFA SET 4 SEATER as shown on Drawing No. FD-281/FD/MAP-II/02 including taking out old Cushion Seat with Cover, complete all as specified and as directed. NOTE : Rate of Tapestry Cloth should not be less than Rs. 350.00 per RM.

M&L for scrapping of rough surface and old worn out polished layer with scrapper/sand paper for smoothing the surface of SOFA SET 4 SEATER (Drawing No. FD-281/FD/MAP-II/02) and applying Two Coats of French Polish (approved quality) to glossy finish complete all as specified and as directed.

S&F RUBBER/PVC SHOE superior quality (approved quality) fixing with suitable size Steel Plated Screws to Leg of SOFA SET 4 SEATER as shown on Drawing No. FD-281/FD/MAP-II/02 including taking out unserviceable Shoe, complete all as specified and as directed.

M&L CUSHION COVER made out of approved Tapestry Cloth suitable for FOAM CUSHION SEAT or BACK of size 21"x22"x4" duly stiched with Fine Standard Thread and providing best quality Chain with Runner on One Side and fixing to SOFA SET 4 SEATER as shown on Drawing No. FD-281/FD/MAP-II/02 including taking out old Cushion Cover, complete all as specified and as directed. NOTE : Rate of Tapestry Cloth should not be less than Rs. 350.00 per RM.

M&L Second Class Hardwood (seasoned Timber) FRONT/REAR LEG of SOFA SET 5 SEATER, made to shape/size as shown on Drawing No. FD-281/FD/MAP-II/02 including taking out old Front/Rear Leg, complete all as specified and as directed.

All as per Item no. 192 here in before but for BACK/FRONT RAIL of single seater, complete all as specified and as directed.

All as per Item no.192 here in before but for BATTEN for SEAT/ BACK of SOFA SET 5 SEATER, complete all as specified and as directed.

All as per Item no. 192 here in before but for ARM of SOFA SET 5 SEATER, complete all as specified and as directed.

M&L FOAM CUSHION SEAT and BACK 95 to 100mm thick 32 density MAKE : KURLON/SLEEPWELL covered with Tapestry Cloth superior quality duly stitched with fine standard thread and providing best quality Chain with Runner on One Side as approvd by GE, suitable for SEAT of SOFA SET 5 SEATER as shown on Drawing No. FD-281/FD/MAP-II/02 including taking out old Cushion Seat with Cover, complete all as specified and as directed. NOTE : Rate of Tapestry Cloth should not be less than Rs. 350.00 per RM.

All as per Item no. 192 here in before but for BACK/FRONT RAIL of 3 seater of SOFA SET, complete all as specified and as directed.

M&L for scrapping of rough surface and old worn out polished layer with scrapper/sand paper for smoothing the surface of SOFA SET 5 SEATER (Drawing No. FD-281/FD/MAP-II/02) and applying Two or more Coats of French Polish (approved quality) to glossy finish complete all as specified and as directed.

S&F RUBBER/PVC SHOE superior quality (approved quality) fixing with suitable size Steel Plated Screws to Leg of SOFA SET 5 SEATER as shown on Drawing No. FD-281/FD/MAP-II/02 including taking out unserviceable Shoe, complete all as specified and as directed.

M&L CUSHION COVER made out of approved Tapestry Cloth suitable for FOAM CUSHION SEAT or BACK of size 21"x22"x4" duly stiched with Fine Standard Thread and providing best quality Chain with Runner on One Side and fixing to SOFA SET 5 SEATER as shown on Drawing No. FD-281/FD/MAP-II/02 including taking out old Cushion Cover, complete all as specified and as directed. NOTE : Rate of Tapestry Cloth should not be less than Rs. 350.00 per RM.

M&L Second Class Hardwood (seasoned Timber) FRONT/REAR LEG of SOFA SET 3 SEATER, made to shape/size as shown on Drawing No. FD-281 including taking out old Front/Rear Leg, complete all as specified and as directed.

All as per Item no. 201 here in before but for BACK/FRONT RAIL of single seater, complete all as specified and as directed.

All as per Item no.201 here in before but for BATTEN for SEAT/ BACK of SOFA SET 3 SEATER, complete all as specified and as directed.

All as per Item no. 201 here in before but for ARM of SOFA SET 3 SEATER, complete all as specified and as directed.

M&L FOAM CUSHION SEAT and BACK 95 to 100mm thick 32 density MAKE : KURLON/SLEEPWELL covered with Tapestry Cloth superior quality duly stitched with fine standard thread and providing best quality Chain with Runner on One Side as approvd by GE, suitable for SEAT of SOFA SET 3 SEATER as shown on Drawing No. FD-281 including taking out old Cushion Seat with Cover, complete all as specified and as directed. NOTE : Rate of Tapestry Cloth should not be less than Rs. 350.00 per RM.

All as per Item no. 201 here in before but for BACK/FRONT RAIL of 3 seater of SOFA SET, complete all as specified and as directed.

M&L for scrapping of rough surface and old worn out polished layer with scrapper/sand paper for smoothing the surface of SOFA SET 5 SEATER (Drawing No. FD-281) and applying Two or more Coats of French Polish (approved quality) to glossy finish complete all as specified and as directed.

S&F RUBBER/PVC SHOE superior quality (approved quality) fixing with suitable size Steel Plated Screws to Leg of SOFA SET 3 SEATER as shown on Drawing No. FD-281 including taking out unserviceable Shoe, complete all as specified and as directed.

M&L CUSHION COVER made out of approved Tapestry Cloth suitable for FOAM CUSHION SEAT or BACK of size 21"x22"x4" duly stiched with Fine Standard Thread and providing best quality Chain with Runner on One Side and fixing to SOFA SET 3 SEATER as shown on Drawing No. FD-281 including taking out old Cushion Cover, complete all as specified and as directed. NOTE : Rate of Tapestry Cloth should not be less than Rs. 350.00 per RM.

Baruah Fabrication

L.BHIMSEN

Markson