Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹30.6 LAccepted-AOC SILPASAMITI PARA JALPAIGURI 735101 | JALPAIGURI | JALPAIGURI | WEST BENGAL | 735101 | L1 | Accepted-AOC Accepted. | |
| 2 | L2₹30.9 L+₹28,493 (0.93%)Rejected-Finance | L2 | Rejected-Finance Higher Bid Value. | |
| 3 | L3₹31.1 L+₹42,791 (1.40%)Rejected-Finance | L3 | Rejected-Finance Higher Bid Value. |
Tender Value
Refer Docs
EMD Value
₹61,570
Closing Date
1 Mar 2021, 2:00 pmClosed
Exe. Engineer, PWD, Jalpaiguri Electrical Division
Office of The Executive Engineer, PWD, Jalpaiguri Electrical Division Purta Bhavan, Hakimpara, P.O.and District Jalpaiguri, PIN 753101.
Proposed Construction of New Store, P.P Unit and N.R.C at Mal Sub-Divisional Hospital, Jalpaiguri-Total EI Works.
2021_WBPWD_323955_1
WBPWD/EE/JED/NIQ 07e/Q of 2020-21.
Open Tender
ELECTRICAL WORKS ORG
Item Rate
90 days
Malbazar Sub-Division Hospital
Please refer Tender documents.
2 documents required · 2 mandatory
₹61,570
Yes
8 Jun 2021
6 Feb 2021
3 Mar 2021
6 Feb 2021
1 Mar 2021
6 Feb 2021
Amount
Main Power Connection Supply & delivery of 1.1 KV Gr. XLPE/ PVC Armoured Aluminium Cable (KEI / Gloster / Havells / Approved by EIC)
2 core 6 sq. mm.
4 core 16 sq. mm.
4 core 35 sq. mm.
4 core 70 sq. mm.
Laying of cable as below, after cutting floor/pavement/wall/ and making holes incl., embedding the cable at an average depth as below and mending good the damages to original finish incl. removing the rubbish [PWD/GS Page: F-3 Item: 5]
upto 35 sqmm at an average depth of 75 mm
from 50 sqmm to 95 dqmm at an average depth of 100 mm
Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed.
Laying of one No. cable above 35 sqmm & upto 185 sqmm [PWD/GS Page: F-2 Item: 1/b]
S & F compression type brass cable gland complete with brass gland, brass ring & rubber ring for dust & moisture proof entry of XLPE/PVC armoured cable. [PWD/GS Page No.: F-4 Item No.: 7/c]
2 core 6 sq. mm.
4 core 16 sq. mm.
4 core 35 sq. mm.
4 core 70 sq. mm.
Finishing the end of the XLPE/PVC armoured cableas by crimping method incl. S&F solderless socket (Dowels make), tapes, anticorrosive paste & joiting materials. [PWD/GS Page No.: F-5 Item No.: 8/b]
2 core 6 sq. mm.
4 core 16 sq. mm.
4 core 35 sq. mm.
4 core 70 sq. mm.
S&F medium gauge 80mm dia GI Pipe (ISI-Medium) Protection with necessary fittings and jointing metarials as required as per GS. [PWD/GS Page: F-6 Item: 11]
S&F medium gauge 40mm dia GI Pipe (ISI-Medium) Protection with necessary fittings and jointing metarials as required as per GS. [PWD/GS Page: F-6 Item: 11]
Supplying and fixing Havells 30/32A 240V DP with fuse on L&N Sheet steel Main Switches on flat iron frame on wall [PWD/GS Page: D-1 Item: 1/a]
Supply & Fixing Direct on Line starter for motor starters (for motor control) on flat iron frame / angle iron frame on wall (L&T: MK1 DOL Cat: SS96228) [PWD/GS Page: C-1 Item: 7]
Earthing Installation Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire, with an average depth of 3.65 Mts. below the ground level (For soft Soil: ISI-Medium GI pipe) [PWD/GS Page No.: G-1 Item No.:2/a]
Excavation of soil for installation of Earth Electrode and filling & ramming. (Soft Soil) [PWD/GS Page: G-1 Item:1]
Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe [PWD/GS Page: G-2 Item: 3/a]
S&F earth busbar of galvanized (Hot Dip) MS flat on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required [PWD/GS Page: G-2 Item: 4/a]
S&F galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall
Connecting the equipments to earth busbar including S & F 4SWG GI (Hot Dip) wire of size. [PWD/GS Page:G-2 Item: 5/a]
S & F 4SWG GI (Hot Dip) wire of size.
S & F 6SWG GI (Hot Dip) wire of size.
Components of Power Distribution System S&F double door 6-Way Vertical TPN MCB Distribution board for 160A MCCB incomer with IP-42/43 protection, on angle iron frame on wall incl. Inter connection & provision for earthing attachment (Legrand /L&T/Siemense /Havells Metalica /ABB Elegance - as per direction of EIC) [PWD/GS Page: D-11 Item: 15]
S&F IP-42/43 cable end box for 4/8/12-way VTPN (Legrand /Siemense /Havells Metalica /ABB Elegance - as per direction of EIC) [PWD/GS Page: D-12 Item: 16]
S&F double door Horizontal 6-Way TPN MCB Distribution board with IP-42/43 protection, concealed in wall (Legrand: (607716 /Siemense /Havells Metalica /ABB Elegance - as per direction of EIC) [PWD/GS Page: D-10 Item: 14 ]
S&F IP-42/43 wire way box for 6 way HTPN (Legrand /Siemense /Havells Metalica /ABB Elegance - as per direction of EIC) [PWD/GS Page: D-12 Item: 16]
S&F double-door (2+12) Way SPN MCB Distribution Board with IP-42/43 protection, concealed in wall.(Legrand: (607712 /Siemense /Havells Metalica /ABB Elegance - as per direction of EIC) [PWD/GS Page: D-09 Item:13]
S&F Wire way box suitable for 2+12-way SPN MCB DB (Legrand /Siemense /Havells Metalica /ABB Elegance - as per direction of EIC)
S&F 415 V L&T 160A 4- Pole MCCB of Breaking capacity 25kA/35kA with fixed thermal and fixed magnetic / adjustable thermal and fixed magnetic setting in existing DBs / enclosure and necessary connection[PWD/GS Page: D-8 Item:10]
Supply & fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection (Legrand /Siemense /Havells Metalica /ABB Elegance - as per direction of EIC) [PWD/GS Page: D-6 Item: 7]
63A FP MCB
63A TP MCB
40A DP MCB
6-32A SP MCB
S&F 40A 240/415 V (L&T: AUC00204000) changeover switch of on din rail of existing DB and necessary connection.
S&F Legrand: make 40A, 240V, 300mA sensetive double pole RCBO (L&T: AUF3C204030).
Distribution Wiring Installation Distn. wiring in 3X22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to light/fan/call bell points with Piano key type switch (Anchor make) fixed on sheet metal (16 SWG) switch board complete with 2 no. “Ph & N” copper bar and 'L' sahped insulator chair with bakelite/perspex (wall matching colour) top cover (3 mm thick) flushed in wall incl. mending good damages to original finish. [equivalet to PWD/GS Page: E-9 Item: 2/a]
On board 5A
Average run: 08 Mtr.
Average run: 10 Mtr.
Average run: 12 Mtr.
Distn. wiring in 3X22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe (for horizontal & vertical run in wall and celing portion through prelaid polythen pipe) complete with all accessories embedded in wall to light/fan/call bell points with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board with top cover plate and 2 no. suitable size “Ph & N” copper bar and 'L' sahped insulator chair & earthing attachment fixed on wall incl. mending good damages to original finish [equivalet to PWD/GS Page: E-20 Item: G/1]
On board 5A
Average run: 08 Mtr.
Average run: 10 Mtr.
Cutting channel of 40 mm x 40 mm size on masonry wall incl. S&F heavy gauge 19mm polythene pipe dia as stated below, by means of iron hooks and supplying and drawing 18 SWG GI Wire as fish wire incl. mending good damages to building works [PWD/GS Page: E-02 Item: 3/a]
Finishing of the PVC insulated wire ends by socketting with pin/ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. [PWD/GS Page: F-5 Item: 9]
2 x 22/0.3 (1.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC
2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm)
2x56/0.3 (4 sqmm) + 1x36/0.3 (2.5 sqmm)
2 x 84/0.3 (6 sqmm) + 1 x 56/0.3 (4 sqmm)
S&F Electronic Socket type fan regulator on existing switch board with backelight top cover after making housing for regulator knob by cutting backelight top cover including making necessary connections. [Make: Anchor] [PWD/GS Page: E-6 Item: 18/a ]
Supply & Fixing 240V, Modular Socket (2 Module) type fan regulator (Step type) (Brand approved by EIC) on existing Modular GI switch board with top cover plate incl. making necy. connections etc. [PWD/GS Page: E-18 Item: 10 ]
S&F 250 V AC/DC superior type Call Bell (Anchor-8320) on HW board incl. S&F HW board [PWD/GS Page: D-13 Item: 20 ]
Switch-Sockets & Enclosure with MCB
Supply & Fixing 250 V one 5 Pin 6A flush type plug socket with one 6A Piano key type (Anchor make) switch on sheet metal box with bakelite top cover and earthing attachment incl. S&F sheet metal box appropriate of size [16 SWG] with 3mm thick bakelite top cover.[PWD/GS Page: E-6 Item: 21]
Supply & Fixing 250 V two 5 Pin 6A flush type plug socket with two 6A Piano key type (Anchor make) switch on sheet metal box with bakelite top cover and earthing attachment incl. S&F sheet metal box appropriate of size [16 SWG] with 3mm thick bakelite top cover. [PWD/GS Page: E-4 & 5 Item: 11, 12 & 14, 15]
Supply & Fixing 240 V, two nos. 6 A, 3 pin Modular type plug socket (Brand approved by EIC) with two nos. 6A Modular type switch, without plug top on 6 Module GI Modular type switch board with 6 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. [PWD/GS Page: E-18 Item: 9/a ]
S&F 250 V one 5 Pin 20A flush type plug socket with one 20A Piano key type (Anchor make) switch on sheet metal box with bakelite top cover. [PWD/GS Page: E-6 Item No.: 22]
S&F 240 V, 16 A, 3 pin Modular type plug socket (Brand approved by EIC) with 16A Modular type switch, without plug top on 4 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. [PWD/GS Page: E-18 Item: 9/b ]
Supply & Fixing 240 V, 3 nos. 6A, & 1 no. 20A plug socket with separate 3 nos. 6 A & 1 no. 20A Piano key type switch, indicator & 20A switch type SP MCB (Brand approved by EIC) on sheet metal switch board incl. S & F 240x200x65mm MS (16SWG) switch board and bakelite top cover of 3mm thick and making necessary connections as required (Computer Board) [PWD/GS Page: E-7 Item: 26 ]
Supply & Fixing 21A OLP3+ AC Machine Starter with 21 A DP MCB on sheet metal switch board embedded in wall incl. S & F 200X150X65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required.
Fan Fittings & other accessories
S&F MS fan clam of two piece type for RC ceiling as per approved specification, fabricated from 40 mm x 9 mm MS flat including making good damages to building roof with satisfactory finishing and painting [PWD/GS Page:D-14 Item: 29]
Supply & Fixing 18" 4-blades, Metal Body AC wall bracket fan (Orient: Wall-II Tornado) on wall by S&F rag bolts, nuts & washers (6 mm dia x 62 mm long) on 150mmX300mm best quality vernished wood or as reqd. incl. S&F 24/0.20 PVC insulated flexible copper wire 0.5 mt. length [PWD/GS Page: C-4 Item: 29 ]
S&F EPC make 9" Sweep A.C Exhaust fan incl. making hole on wall with nuts & bolts of required with S&F of louver shutter. [PWD/GS Page: C-4, Item: 28, 30 ]
S&F EPC make 12" Heavy Duty Sweep A.C Exhaust fan incl. making hole on wall with nuts & bolts of required with S&F of louver shutter. [PWD/GS Page: C-4, Item: 28, 30 ]
Supply & Fixing 48" (1200mm) AC ceiling fan make: (Orient PSPO NEWBREEZE or SUMMERCOOL / equivalent of UHSA approved by EIC) complete with down rod, canopy fork, blades with all other accessories etc. but without regulator. [PWD/GS Page: C-3 Item: 21/a] Supply & fixing additional safety arrangement of ceiling fan by stranded GI strain wire of suitable gauge with one end fixed at RC clamp with special type of socket, nut-bolts, thimbles which throughly crimped with the strain wire and the wire passing through down rod (for upto 8 ft) and also other end connected with armature spindle by its existing jam nut hole with special arrangement (sample approved by EIC). The length of the strain wire up to 9ft also considering any type of work required i.e. enlarging the existing hole by file etc. to complete the job including installation as per direction of EIC (Static & Dynamic Load Test (in rotation of 1:20) certificate must be provided with final bill jointly with concerned Junior Engineer & authorised Electrical Supervisor of Agency).
Engraving the deptt. number with 10 mm lettering on the body of fan upto 10 letters incl. hifen, stroke or stop (like as PWDES1 0001) [PWD/GS Page: C-3 Item: 24/a ]
S&F single 4ft LED tube light fitting incl. 4ft LED tube (LTT8-20), complete with all accessories suspended from ceiling/ beam with L-clamp/ beem clamp. [Crompton: IGP131LT8-16 or Equivalent of Philips/ Havells/ Nordusk/ C&S] [PWD/GS Page: C-2 Item: 17]
S&F double 4ft LED tube light fitting incl. 2 nos. 4ft LED tube lamp (LTT8-20), complete with all accessories suspended from ceiling/beem with L-clamp/ beem clamp. [Crompton: IGP132LT8-16 or Equivalent of Philips/ Havells/ Nordusk/ C&S] [PWD/GS Page: C-2 Item: 17]
Extra for suspension for florescent light fitting exceeding 25 cm with S&F additional 2 no. 20 mm dia EI conduit (14 SWG) supports & necy. PVC insulated wire and painting etc. as required by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length. [PWD/GS Page: C-2 Item: 16]
Supply & Fixing of 10W LED Lamp. Havells or Equivalent of Philips or Crompton )
Compound Light or Security Light
Supply & fixing Sintex loop box of size 250 x 200 x 105 (Syntex: GSJB-2520) with half round clamp on pole and supply & fixing a best quality 32A, 2-pole barrier terminal and 6A SP MCB inside it including all accessories.
Painting of 2.0mtr. long Steel Tubular Pole of lengths and One coat of red lead/Zinc hromate priming & 2 no. of coats synthetic enamel paint/ aluminium paint, as given below with ready mixed paint/primer of approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint (as per direction of EIC) [PWD/GS Page: H-2 Item: 7/A]
Supply & delivery of 1.1 KV Gr. XLPE/ PVC Armoured Aluminium Cable (KEI/ Gloster / Havells / Approved by EIC)
2 core 6 sq. mm.
Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed.
Laying of one No. cable upto 35 sqmm [PWD/GS Page: F-2 Item: 1/a]
S & F compression type brass cable gland complete with brass gland, brass ring & rubber ring for dust & moisture proof entry of XLPE/PVC armoured cable. [PWD/GS Page No.: F-4 Item No.: 7/c]
2 core 6 sq. mm.
Finishing the end of the XLPE/PVC armoured cableas by crimping method incl. S&F solderless socket (Dowels make), tapes, anticorrosive paste & joiting materials. [PWD/GS Page No.: F-5 Item No.: 8/b]
2 core 6 sq. mm.
Supply & fixing of single arm header assembly made with 100mm dia GI pipe Jacket of 30cm long with 1.5 mtr. long 40mm dia GI pipe bracket duly welded with top cap at an angle of 110 degree with the vertical incl. 12 mm dia full threaded through nuts-bolts and 3 nos. supporting nut-bolts etc. including necessary painting as per direction of EIC.
Supply & fixing of 120W outdoor type light fitting complete with all accessories to be fixed on 9 mtr. incl. S&F necy. length of 1.5 sqmm PVC insulated single core stranded annealed copper wire and making necessary connections as required.(Crompton: LSTP-120-CDL or equivalent of Philips/ Nordusk/ C&S)
Supplying & fixing medium gauge GI Pipe Pole 2Mtr long ( ISI-Medium) including fabrication charges and complete errection on roof including required MS clamps and nut bolts as per direction of EIC.
Panel Panel No. 1: Supply delivery installation testing & commissioning Indoor Cubical type L.T. Distribution panel board of appropriate size base mounted cmpartmentalized with maple arrangement having rigid & self supporting structure with cable allay fabricated from 3 mm thick CRCA sheet steel with 25X25X6mm MS angle frame and 75X40X40mmX4.4mm M.S. Channel for base support. And making masonary trench of 600mm depth and suitable length & wide in matching with Panel with 10" brick work, plastering & neet cementing as per direction of EIC. The Pannel should be made from CPRI certified or equivalent Panel making workshop. The panel board consisting of the following item-
500V, 300A electrolyte grade tinned copper BBC with vertical section of 40x5mm size for neutral & Phases. Bus-bar shall be fixed with FRP insulator chair & the entire bars are insulated with PVC heat Sinkable sleeve of suitable size, color and suitable size bus bar guard and bus bar separator as per direction of E.I.C [equal bar for each i.e. 4-bar] And interconnections for: 200A MCCB/CO is 25X5mm copper bar, for 200A MCCB is 70sqmm copper wire, for 100A MCCB is 35sqmm copper wire & for 80A MCCB is 25sqmm copper wire. Cable alley should be present on both sides with 100A Terminal block with guard for interconnection with 100A/80A MCCB
Incomming: L&T 415V 200A MCCB 02 nos. L&T 415V 200A Changeover 01 no. Outgoing: L&T 415V 100A MCCB 07 nos. L&T 415V 80A MCCB 02 no. Other equipments: 3-phase LED Volt Meter class-1 (L&T: WL132010OOOO) 01 no. 3-phase LED Ammeter 5A, class-1 ( L&T: WL131010OOOO) 01 no. 200/5A CT (Kappa) 03 nos. LED R-Y-B indicator with Legrand 6A SP MCB 03 nos each Supply & Fixing 16"X12" Danger Board 01 no. Spreader terminals and extended rotary handle for MCCB as per direction of EIC.
LC S & F Lightning conductor Air-terminals made of 15 mm dia 1500 mm long GI pipe (ISI Medium) having five prongs of 4 SWG GI (Hot Dip) wire at top with 85 mm dia 6 mm thick GI base plate at bottom incl. necessary holes etc. duly grouted on the parapet etc. in CC mortar (4:2:1). (PWDE GS Page: J-1 Item: 1)
Making soldered joints between conductors, conductors and air terminals for 4 SWG GI (Hot Dip) wire incl. supply of jointing materials and painting with 2 (two) coats of bituminous paint (PWDE GS Page: J-1 Item: 2)
Supply & fixing GI (Hot Dip) strips 20 mm x 3 mm thick for horizontal run on the Parapet/Roof/ Wall with GI Saddles 1100 mm apart incl. mending good the damages to building works. (PWDE GS Page: J-1 Item: 9)
Supply & fixing of GI (Hot Dip) strips 20 mm x 3 mm thick for vertical run on wall with GI saddles spaced not exceeding 1000 mm apart incl. mending good damages to building work. (PWDE GS Page: J-1 Item: 11a)
Supply & fixing 30mm heat sinkable sleeve on GI (Hot Dip) strips 20 mm x 3 mm thick for horizontal & vertical run.
Supplying & Fixing high quality Porceilain chair (Earth Bus support) of size 25mm breath& 30mm height including fix up of 8mm 2nos bullet on both side and 3" all thereded nut & bolt with 2 nos GI washer suitable on top middle portion for fixing 20X3mm GI Streep on wall (horizontal & vertical run) of the building as per direction of EIC.
Supply & Fixing of Testing Joints by 20 mm x 3 mm thick GI (Hot Dip) strip 125 mm long grouted on wall having clearance of 6 mm from wall for making connection with thimbles at the end of 7/10 SWG GI (Hot Dip) stranded Wire and 4 SWG GI (Hot Dip) wire of vertical conductor and conductor from earth electrode complete with S & F thimbles, GI bolts, nuts, check-nuts, spring washers etc. as required. (PWDE GS Page: J-2 Item: 13)
Earthing with 65 mm dia GI pipe (TATA-Medium)x 3.0 Mts. long and 1 No. 50 mm x 6 mm galvanized (Hot Dip) steel strip (4 Mts. long), 20 mm dia x 125 mm long galvanized bolt, double nuts, double washers including finishing both ends by making holes etc. and S & F 65 mm dia GI pipe (ISI-Medium) protection (3 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level to an average depth of 3.65 Mts (PWDE GS Page: G-1 Item: 2d)
Excavation of soil for installation of Earth Electrode and filling & ramming for morrum soil. (PWDE GS Page: G-1 Item: 1a)
Extra for treatment of soil by using salt & charcoal or coke for plate electrode (PWDE GS Page: G-2 Item: 3b)
Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe (PWDE GS Page: G-2 Item: 3a)
Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 40 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required (PWDE GS Page: G-2 Item: 4b)
Cutting floor/pavement/wall/ and making channel incl., embedding the 20x3mm GI flat at an average depth 75mm below and mending good the damages to original finish incl. removing the rubbish (equivalent of PWDE GS Page: F-3 Item: 5i)
Hiring charges for scaffolding arrangement including dismantling at the end of work and carriage, for LC installation, per storey of building per vertical run (PWDE GS Page: J-1 Item: 7)
Hiring charges for scaffolding arrangement including dismantling at the end of work and carriage, for LC installation of overhead reservoir (vertical run) (PWDE GS Page: J-1 Item: 8)
EVERGREEN ENGINEERS CO OP CONSTRUCTION SOCIETY LTD
SANKAR GHOSH
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .