Electrical rewiring and Illumination of Worker Institute under Urimari OCP.

Amount

Wiring for light point/ Exhaust fan point/call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S./PVC box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required

Wiring for Circuit/Sub –main wiring along with earth wire with the following size of FRS PVC Insulated copper conductor , single core cable in surface /recessed medium class PVC conduit as required. ( 2x2.5 sq.mm + 1x2.5 sq.mm earth wire)

Wiring for Circuit/Sub –main wiring along with earth wire with the following size of FRS PVC Insulated copper conductor , single core cable in surface /recessed medium class PVC conduit as required. ( 2x4 sq.mm + 1x4 sq.mm earth wire)

Supply and fixing metal/PVC box following size (Nominal size) on surface or in recess with suitable size of phenoic laminated sheet cover in front including painting etc as required. (200mm x 250mm x100 mm deep)

Supplying & fixing following piano type switch/socket on the existing switch box/ cover including connection as required ( 3 pins 5/6 Amp. Switch) Outlet.

Supplying & fixing following piano type switch/socket on the existing switch box/ cover including connection as required ( 3 pins 5/6 Amp. Socket) Outlet.

Supplying and fixing stepped type electronic fan regulator on the existing modulator plate switch box including connections but excluding plate etc. as required.

Supply and fixing metal/PVC box of 180mm x 100mm x 60mm deep (nominal size) on surface with suitable size of phenolic laminated sheet cover in front including providing and fixing 06 pin 5/6 and 15/16 amps socket outlet and 15/16 amp piano type switch , connection etc.

S/F ceiling rose: Supply & Fixing 3 Pin, 5 Amp ceiling Rose on the existing Junction Box/ Wooden box including connection ets as required

Supply & Fixing PVC batten/ angle holder including connection etc. as required.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 6 way, Double door

Supplying and fixing 5A to 32 Arating, 240/415V,10kA,"C"curve, miniature circuit breake rsuitable for inductive load of following pole sintheexisting MOBDB complete with connections, testing and commissioning etc.as require double pole

Supplying and fixing DP Sheet steel enclosure on surface /recess along with 25/32 Amp 240 V “C” Curve DP MCB complete with connection , testing and commissioning etc. as required.

Filling available excavated earth (excluding rock) in trenches, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 metres

Excavation for cable trenches in soft soil, depth upto 1.2 m including dressing of sides lift upto 1.5 m, including getting out the excavated soil, refilling with sand and or good soil after laying of cable/ pipe etc in layers of 20 cm, ramming, watering and disposal of surplus excavated soil as directed, within a lead of 50 metres.

Providing of chemical earth Pit model T -39 mm 3mtr with BFC bag approximate (25x2=50 Kg) with all accessories

Providing of 20 W LED Tube Light

Providing and Installation of 06 Sqmm of 02 Core 1100V copper cable

Providing and fixing 3 Pole Neutral Switch Fuse Unit 63Amp 440V